aboutsummaryrefslogtreecommitdiff
path: root/hw/tpm
AgeCommit message (Collapse)AuthorFilesLines
2015-09-11maint: remove unused include for dirent.hDaniel P. Berrange1-2/+0
A number of files were including dirent.h but not using any of the functions it provides Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-22qerror: Move #include out of qerror.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-01TPM2 ACPI table supportStefan Berger1-0/+11
Add a TPM2 ACPI table if a TPM 2 is used in the backend. Also add an SSDT for the TPM 2. Rename tpm_find() to tpm_get_version() and have this function return the version of the TPM found, TPMVersion_Unspec if no TPM is found. Use the version number to build version specific ACPI tables. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31tpm: Probe for connected TPM 1.2 or TPM 2Stefan Berger5-54/+167
In the TPM passthrough backend driver, modify the probing code so that we can check whether a TPM 1.2 or TPM 2 is being used and adapt the behavior of the TPM TIS accordingly. Move the code that tested for a TPM 1.2 into tpm_utils.c and extend it with test for probing for TPM 2. Have the function return the version of TPM found. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31Extend TPM TIS interface to support TPM 2Stefan Berger4-9/+115
Following the recent upgrade to version 1.3, extend the TPM TIS interface with capabilities introduced for support of a TPM 2. TPM TIS for TPM 2 introduced the following extensions beyond the TPM TIS 1.3 (used for TPM 1.2): - A new 32bit interface Id register was introduced. - New flags for the status (STS) register were defined. - New flags for the capability flags were defined. Support the above if a TPM TIS 1.3 for TPM 2 is used with a TPM 2 on the backend side. Support the old TPM TIS 1.3 configuration if a TPM 1.2 is being used. A subsequent patch will then determine which TPM version is being used in the backend. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-04-30tpm: fix coding styleStefan Berger1-2/+2
Fix coding style in one instance. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-30tpm: Modify DPRINTF to enable -Wformat checkingStefan Berger2-17/+13
Modify DPRINTF to always enable -Wformat checking. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-30tpm: Cast 64bit variables to int when used in DPRINTFStefan Berger1-4/+4
Cast 64bit variables to int when used in DPRINTF. They only contain 32bit of data. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-19Fix remaining warnings from Sparse (void return)Stefan Weil1-1/+1
Sparse report: hw/display/vga.c:2000:5: warning: returning void-valued expression hw/intc/arm_gic.c:707:9: warning: returning void-valued expression hw/intc/etraxfs_pic.c:138:9: warning: returning void-valued expression hw/nvram/fw_cfg.c:475:5: warning: returning void-valued expression hw/timer/a9gtimer.c:124:5: warning: returning void-valued expression hw/tpm/tpm_tis.c:794:5: warning: returning void-valued expression hw/usb/hcd-musb.c:558:9: warning: returning void-valued expression hw/usb/hcd-musb.c:776:13: warning: returning void-valued expression hw/usb/hcd-musb.c:867:5: warning: returning void-valued expression hw/usb/hcd-musb.c:932:5: warning: returning void-valued expression include/qom/cpu.h:584:5: warning: returning void-valued expression monitor.c:4686:13: warning: returning void-valued expression monitor.c:4690:13: warning: returning void-valued expression Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Andreas Färber <afaerber@suse.de> Cc: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-11tpm: Move memory subregion function into realize functionStefan Berger1-3/+3
Move the memory subregion function into the DeviceClass realize function due to isa_address_space (now) crashing if called in the instance init function. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10tpm: Remove superfluous '\n' around error_report()Gonglei1-6/+6
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-01tpm: Support for capability flags of TIS 1.3Stefan Berger1-1/+8
Provide the TIS 1.3 capability flags. The interface now looks like a TIS 1.3 interface. It's fully compatible with previous TIS 1.2 and drivers written for TIS 1.2 continue to work. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-01tpm: Support for TIS selftest done flagStefan Berger3-18/+78
Extend the backend to check whether the TPM_ContinueSelfTest finished successfully and provide a flag to the TIS front-end if it successfully finished. The TIS then sets a flag in all localities in the STS register and keeps it until the next reset. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-01tpm: Support for XFIFO registerStefan Berger1-0/+4
Support for the XFIFO register (range) of the TIS 1.3 specification. We support a range of 64 bytes. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-01tpm: Allow 32 & 16 bit accesses to the registersStefan Berger1-13/+47
Improve the access to the registers with 32 and 16 bit reads and writes. Also enable access to a non-base register address, such as reads of the 2nd byte of a register. Map the FIFO byte access to any byte within its 4 byte register (following specs). Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-01tpm: Extend sts register to 32 bitStefan Berger1-1/+1
More recent TIS specs extend the STS register to 32 bit. While we don't store the TIS interface state, yet, we can extend it without sideeffects. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-10Drop superfluous conditionals around g_strdup()Markus Armbruster1-3/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-10-20hw: Convert from BlockDriverState to BlockBackend, mostlyMarkus Armbruster1-1/+1
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-25Add ACPI tables for TPMStefan Berger1-7/+1
Add an SSDT ACPI table for the TPM device. Add a TCPA table for BIOS logging area when a TPM is being used. The latter follows this spec here: http://www.trustedcomputinggroup.org/files/static_page_files/DCD4188E-1A4B-B294-D050A155FB6F7385/TCG_ACPIGeneralSpecification_PublicReview.pdf This patch has Michael Tsirkin's patches folded in. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-08-18tpm_tis: remove instance_finalize callbackPaolo Bonzini1-8/+0
It is never used, since ISA device are not hot-unpluggable. Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-18memory: remove memory_region_destroyPaolo Bonzini1-1/+0
The function is empty after the previous patch, so remove it. Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-08-22aio / timers: Untangle include filesAlex Bligh1-0/+1
include/qemu/timer.h has no need to include main-loop.h and doing so causes an issue for the next patch. Unfortunately various files assume including timers.h will pull in main-loop.h. Untangle this mess. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-04hw/t*: pass owner to memory_region_init* functionsPaolo Bonzini1-1/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-23Move TPM passthrough specific command line options to backend structureStefan Berger2-0/+23
Move the TPM passthrough specific command line options to the passthrough backend implementation and attach them to the backend's interface structure. Add code to tpm.c for validating the TPM command line options. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Corey Bryan <coreyb@linux.vnet.ibm.com> Message-id: 1366641699-21420-1-git-send-email-stefanb@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22tpm: Simplify creation of cancel pathStefan Berger1-57/+17
Simplify the creation of the cancel path given the TPM's device path. Given the path /dev/tpm0 build the path /sys/class/misc/tpm0/device/cancel. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1366146516-23814-1-git-send-email-stefanb@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-15sysemu: avoid proliferation of include/ subdirectoriesPaolo Bonzini2-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15tpm: reorganize headers and split hardware partPaolo Bonzini5-0/+1643
The TPM subsystem does not have a full front-end/back-end separation. The sole available backend, tpm_passthrough, depends on the data structures of the sole available frontend, tpm_tis. However, we can at least try to split the user interface (tpm.c) from the implementation (hw/tpm). The patches makes tpm.c not include tpm_int.h, which is shared between tpm_tis.c and tpm_passthrough.c; instead it moves more stuff to tpm_backend.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-12-29 12:58:50 +0000