aboutsummaryrefslogtreecommitdiff
path: root/hw/timer
AgeCommit message (Collapse)AuthorFilesLines
2021-09-21hw/timer: Add SiFive PWM supportAlistair Francis4-0/+478
This is the initial commit of the SiFive PWM timer. This is used by guest software as a timer and is included in the SiFive FU540 SoC. Signed-off-by: Justin Restivo <jrestivo@draper.com> Signed-off-by: Alexandra Clifford <aclifford@draper.com> Signed-off-by: Amanda Strnad <astrnad@draper.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 9f70a210acbfaf0e1ea6ad311ab892ac69134d8b.1631159656.git.alistair.francis@wdc.com
2021-09-21hw/intc: ibex_timer: Convert the timer to use RISC-V CPU GPIO linesAlistair Francis1-5/+12
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V CPU GPIO lines to set the timer MIP bits. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 84d5b1d5783d2e79eee69a2f7ac480cc0c070db3.1630301632.git.alistair.francis@wdc.com
2021-09-01arm: Remove system_clock_scale globalPeter Maydell1-2/+0
All the devices that used to use system_clock_scale have now been converted to use Clock inputs instead, so the global is no longer needed; remove it and all the code that sets it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210812093356.1946-26-peter.maydell@linaro.org
2021-09-01hw/timer/stellaris-gptm: Use Clock input instead of system_clock_scalePeter Maydell1-4/+22
The stellaris-gptm timer currently uses system_clock_scale for one of its timer modes where the timer runs at the CPU clock rate. Make it use a Clock input instead. We don't try to make the timer handle changes in the clock frequency while the downcounter is running. This is not a change in behaviour from the previous system_clock_scale implementation -- we will pick up the new frequency only when the downcounter hits zero. Handling dynamic clock changes when the counter is running would require state that the current gptm implementation doesn't have. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-id: 20210812093356.1946-25-peter.maydell@linaro.org
2021-09-01hw/arm/stellaris: Split stellaris-gptm into its own filePeter Maydell3-0/+318
The implementation of the Stellaris general purpose timer module device stellaris-gptm is currently in the same source file as the board model. Split it out into its own source file in hw/timer. Apart from the new file comment headers and the Kconfig and meson.build changes, this is just code movement. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-id: 20210812093356.1946-24-peter.maydell@linaro.org
2021-09-01hw/timer/armv7m_systick: Use clock inputs instead of system_clock_scalePeter Maydell1-28/+84
Now that all users of the systick devices wire up the clock inputs, use those instead of the system_clock_scale and the hardwired 1MHz value for the reference clock. This will fix various board models where we were incorrectly providing a 1MHz reference clock instead of some other value or instead of providing no reference clock at all. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-id: 20210812093356.1946-22-peter.maydell@linaro.org
2021-09-01hw/timer/armv7m_systick: Add input clocksPeter Maydell1-2/+8
The v7M systick timer can be programmed to run from either of two clocks: * an "external reference clock" (when SYST_CSR.CLKSOURCE == 0) * the main CPU clock (when SYST_CSR.CLKSOURCE == 1) Our implementation currently hardwires the external reference clock to be 1MHz, and allows boards to set the main CPU clock frequency via the global 'system_clock_scale'. (Most boards set that to a constant value; the Stellaris boards allow the guest to reprogram it via the board-specific RCC registers). As the first step in converting this to use the Clock infrastructure, add input clocks to the systick device for the reference clock and the CPU clock. The device implementation ignores them; once we have made all the users of the device correctly wire up the new Clocks we will switch the implementation to use them and ignore the old system_clock_scale. This is a migration compat break for all M-profile boards, because of the addition of the new clock objects to the vmstate struct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210812093356.1946-6-peter.maydell@linaro.org
2021-06-24hw/timer: Initial commit of Ibex TimerAlistair Francis2-0/+306
Add support for the Ibex timer. This is used with the RISC-V mtime/mtimecmp similar to the SiFive CLINT. We currently don't support changing the prescale or the timervalue. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 716fdea2244515ce86a2c46fe69467d013c03147.1624001156.git.alistair.francis@wdc.com
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella1-1/+1
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-17Merge remote-tracking branch ↵Peter Maydell1-3/+11
'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging Pull request trivial-branch 20210515 # gpg: Signature made Sat 15 May 2021 11:02:59 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: target/avr: Ignore unimplemented WDR opcode hw/avr/atmega.c: use the avr51 cpu for atmega1280 target/sh4: Return error if CPUClass::get_phys_page_debug() fails multi-process: Avoid logical AND of mutually exclusive tests hw/pci-host: Do not build gpex-acpi.c if GPEX is not selected hw/mem/meson: Fix linking sparse-mem device with fuzzer cutils: fix memory leak in get_relocated_path() hw/rtc/mc146818rtc: Convert to 3-phase reset (Resettable interface) hw/timer/etraxfs_timer: Convert to 3-phase reset (Resettable interface) hw/gpio/aspeed: spelling fix (addtional) qapi: spelling fix (addtional) virtiofsd: Fix check of chown()'s return value virtio-net: Constify VirtIOFeature feature_sizes[] virtio-blk: Constify VirtIOFeature feature_sizes[] hw/virtio: Pass virtio_feature_get_config_size() a const argument backends/tpm: Replace qemu_mutex_lock calls with QEMU_LOCK_GUARD Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-13hw/timer/etraxfs_timer: Convert to 3-phase reset (Resettable interface)Philippe Mathieu-Daudé1-3/+11
TYPE_ETRAX_FS_TIMER is a sysbus device, so its DeviceClass::reset() handler is called automatically when its qbus parent is reset (we don't need to register it manually). Convert the generic reset to a enter/hold resettable ones, and remove the qemu_register_reset() call. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-Id: <20210502163931.552675-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-12Drop the deprecated unicore32 targetMarkus Armbruster2-167/+0
Target unicore32 was deprecated in commit 8e4ff4a8d2b, v5.2.0. See there for rationale. Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-3-armbru@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com>
2021-05-12Drop the deprecated lm32 targetMarkus Armbruster4-629/+0
Target lm32 was deprecated in commit d8498005122, v5.2.0. See there for rationale. Some of its code lives on in device models derived from milkymist ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c. Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-2-armbru@redhat.com> Acked-by: Michael Walle <michael@walle.cc> [Trivial conflicts resolved, reST markup fixed]
2021-05-02hw: Do not include hw/irq.h if it is not necessaryThomas Huth1-1/+0
Many files include hw/irq.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210327050236.2232347-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Do not include hw/sysbus.h if it is not necessaryThomas Huth1-1/+0
Many files include hw/sysbus.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210327082804.2259480-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-30hw/timer/renesas_tmr: Add default-case asserts in read_tcnt()Peter Maydell1-0/+4
In commit 81b3ddaf8772ec we fixed a use of uninitialized data in read_tcnt(). However this change wasn't enough to placate Coverity, which is not smart enough to see that if we read a 2 bit field and then handle cases 0, 1, 2 and 3 then there cannot be a flow of execution through the switch default. Add explicit default cases which assert that they can't be reached, which should help silence Coverity. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210319162458.13760-1-peter.maydell@linaro.org
2021-03-19hw: Replace anti-social QOM type namesMarkus Armbruster1-1/+1
Several QOM type names contain ',': ARM,bitband-memory etraxfs,pic etraxfs,serial etraxfs,timer fsl,imx25 fsl,imx31 fsl,imx6 fsl,imx6ul fsl,imx7 grlib,ahbpnp grlib,apbpnp grlib,apbuart grlib,gptimer grlib,irqmp qemu,register SUNW,bpp SUNW,CS4231 SUNW,DBRI SUNW,DBRI.prom SUNW,fdtwo SUNW,sx SUNW,tcx xilinx,zynq_slcr xlnx,zynqmp xlnx,zynqmp-pmu-soc xlnx,zynq-xadc These are all device types. They can't be plugged with -device / device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one actually works. They *can* be used with -device / device_add to request help. Usability is poor, though: you have to double the comma, like this: $ qemu-system-x86_64 -device SUNW,,fdtwo,help Trap for the unwary. The fact that this was broken in device-introspect-test for more than six years until commit e27bd49876 fixed it demonstrates that "the unwary" includes seasoned developers. One QOM type name contains ' ': "ICH9 SMB". Because having to remember just one way to quote would be too easy. Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and ' ' by '-' in the other type names. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210304140229.575481-2-armbru@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-16hw/i8254: fix vmstate loadPavel Dovgalyuk1-1/+1
QEMU timer of channel 0 in i8254 is used to raise irq at the specified moment of time. This irq can be disabled with irq_disabled flag. But when vmstate of the pit is loaded, timer may be rearmed despite the disabled interrupts. This patch adds irq_disabled flag check to fix that. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Message-Id: <161537170060.6654.9430112746749476215.stgit@pasha-ThinkPad-X280> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-12hw/timer/sse-timer: Propagate eventual error in sse_timer_realize()Philippe Mathieu-Daudé1-0/+1
If the SSECounter link is absent, we set an error message in sse_timer_realize() but forgot to propagate this error. Add the missing 'return'. Fixes: CID 1450755 (Null pointer dereferences) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210312001845.1562670-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11Merge remote-tracking branch ↵Peter Maydell1-1/+1
'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging Pull request # gpg: Signature made Wed 10 Mar 2021 21:56:09 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.0-pull-request: (22 commits) sysemu: Let VMChangeStateHandler take boolean 'running' argument sysemu/runstate: Let runstate_is_running() return bool hw/lm32/Kconfig: Have MILKYMIST select LM32_DEVICES hw/lm32/Kconfig: Rename CONFIG_LM32 -> CONFIG_LM32_DEVICES hw/lm32/Kconfig: Introduce CONFIG_LM32_EVR for lm32-evr/uclinux boards qemu-common.h: Update copyright string to 2021 tests/fp/fp-test: Replace the word 'blacklist' qemu-options: Replace the word 'blacklist' seccomp: Replace the word 'blacklist' scripts/tracetool: Replace the word 'whitelist' ui: Replace the word 'whitelist' virtio-gpu: Adjust code space style exec/memory: Use struct Object typedef fuzz-test: remove unneccessary debugging flags net: Use id_generate() in the network subsystem, too MAINTAINERS: Fix the location of tools manuals vhost_user_gpu: Drop dead check for g_malloc() failure backends/dbus-vmstate: Fix short read error handling target/hexagon/gen_tcg_funcs: Fix a typo hw/elf_ops: Fix a typo ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-10Merge remote-tracking branch ↵Peter Maydell9-18/+994
'remotes/pmaydell/tags/pull-target-arm-20210310' into staging target-arm queue: * Add new mps3-an547 board * target/arm: Restrict v7A TCG cpus to TCG accel * Implement a Xilinx CSU DMA model * hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt() # gpg: Signature made Wed 10 Mar 2021 13:56:20 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210310: (54 commits) hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt() hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_ hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips hw/ssi: xilinx_spips: Clean up coding convention issues hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI hw/arm: xlnx-zynqmp: Clean up coding convention issues hw/dma: Implement a Xilinx CSU DMA model target/arm: Restrict v7A TCG cpus to TCG accel tests/qtest/sse-timer-test: Test counter scaling changes tests/qtest/sse-timer-test: Test the system timer tests/qtest/sse-timer-test: Add simple test of the SSE counter docs/system/arm/mps2.rst: Document the new mps3-an547 board hw/arm/mps2-tz: Add new mps3-an547 board hw/arm/mps2-tz: Make initsvtor0 setting board-specific hw/arm/mps2-tz: Support running APB peripherals on different clock hw/misc/mps2-scc: Implement changes for AN547 hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register hw/misc/mps2-fpgaio: Fold counters subsection into main vmstate hw/arm/mps2-tz: Make UART overflow IRQ board-specific hw/arm/armsse: Add SSE-300 support ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-10hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt()Peter Maydell1-4/+15
The read_tcnt() function calculates the TCNT register values for the two channels of the timer module; it sets these up in the local tcnt[] array, and eventually returns either one or both of them, depending on whether the access is 8 or 16 bits. However, not all of the code paths through this function set both elements of this array: if the guest has programmed the TCCR.CSS register fields to values which are either documented as not to be used or which QEMU does not implement, then the function will return uninitialized data. (This was spotted by Coverity.) Add the missing CSS cases to this code, so that we return a consistent value instead of uninitialized data, and so the code structure indicates what's happening. Fixes: CID 1429976 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210219223241.16344-3-peter.maydell@linaro.org
2021-03-10hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_Peter Maydell1-8/+8
The #defines INTERNAL and CASCADING represent different possible values for the TCCR.CSS register field; prefix them with CSS_ to make this more obvious, before we add more defines to represent the other possible values of the field in the next commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210219223241.16344-2-peter.maydell@linaro.org
2021-03-09hw/lm32/Kconfig: Rename CONFIG_LM32 -> CONFIG_LM32_DEVICESPhilippe Mathieu-Daudé1-1/+1
We want to be able to use the 'LM32' config for architecture specific features. As CONFIG_LM32 is only used to select peripherals, rename it CONFIG_LM32_DEVICES. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210221225626.2589247-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-08hw/timer/sse-timer: Model the SSE Subsystem System TimerPeter Maydell4-0/+479
The SSE-300 includes some timers which are a different kind to those in the SSE-200. Model them. These timers are documented in the SSE-123 Example Subsystem Technical Reference Manual: https://developer.arm.com/documentation/101370/latest/ Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-13-peter.maydell@linaro.org
2021-03-08hw/timer/sse-counter: Model the SSE Subsystem System CounterPeter Maydell4-0/+485
The SSE-300 includes a counter module; implement a model of it. This counter is documented in the SSE-123 Example Subsystem Technical Reference Manual: https://developer.arm.com/documentation/101370/latest/ Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-12-peter.maydell@linaro.org
2021-03-08hw/timer/npcm7xx_timer: Use new clock_ns_to_ticks()Peter Maydell1-2/+2
Use the new clock_ns_to_ticks() function in npcm7xx_timer where appropriate. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210219144617.4782-5-peter.maydell@linaro.org
2021-03-08clock: Add ClockEvent parameter to callbacksPeter Maydell3-5/+6
The Clock framework allows users to specify a callback which is called after the clock's period has been updated. Some users need to also have a callback which is called before the clock period is updated. As the first step in adding support for notifying Clock users on pre-update events, add an argument to the ClockCallback to specify what event is being notified, and add an argument to the various functions for registering a callback to specify which events are of interest to that callback. Note that the documentation update renders correct the previously incorrect claim in 'Adding a new clock' that callbacks "will be explained in a following section". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-2-peter.maydell@linaro.org
2021-03-06hw/timer: Introduce SH_TIMER Kconfig entryPhilippe Mathieu-Daudé2-1/+5
We want to be able to use the 'SH4' config for architecture specific features. Add more fine-grained selection by adding a CONFIG_SH_TIMER selector for the SH4 timer control unit. Add the missing MAINTAINERS entries. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210222141514.2646278-6-f4bug@amsat.org>
2021-02-11arm: Update infocenter.arm.com URLsPeter Maydell1-3/+4
Update infocenter.arm.com URLs for various pieces of Arm documentation to the new developer.arm.com equivalents. (There is a redirection in place from the old URLs, but we might as well update our comments in case the redirect ever disappears in future.) This patch covers all the URLs which are not MPS2/SSE-200/IoTKit related (those are dealt with in a different patch). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210205171456.19939-1-peter.maydell@linaro.org
2021-01-29arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSEPeter Maydell2-12/+0
Now no users are setting the frq properties on the CMSDK timer, dualtimer, watchdog or ARMSSE SoC devices, we can remove the properties and the struct fields that back them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-25-peter.maydell@linaro.org Message-id: 20210121190622.22000-25-peter.maydell@linaro.org
2021-01-29hw/timer/cmsdk-apb-dualtimer: Convert to use Clock inputPeter Maydell1-5/+37
Switch the CMSDK APB dualtimer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-20-peter.maydell@linaro.org Message-id: 20210121190622.22000-20-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-01-29hw/timer/cmsdk-apb-timer: Convert to use Clock inputPeter Maydell1-4/+14
Switch the CMSDK APB timer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-19-peter.maydell@linaro.org Message-id: 20210121190622.22000-19-peter.maydell@linaro.org
2021-01-29hw/timer/cmsdk-apb-dualtimer: Add Clock inputPeter Maydell1-2/+5
As the first step in converting the CMSDK_APB_DUALTIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. We take the opportunity to correct the name of the clock input to match the hardware -- the dual timer names the clock which drives the timers TIMCLK. (It does also have a 'pclk' input, which is used only for the register and APB bus logic; on the SSE-200 these clocks are both connected together.) This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-9-peter.maydell@linaro.org Message-id: 20210121190622.22000-9-peter.maydell@linaro.org
2021-01-29hw/timer/cmsdk-apb-timer: Add Clock inputPeter Maydell1-2/+5
As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. Since the device doesn't already have a doc comment for its "QEMU interface", we add one including the new Clock. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-8-peter.maydell@linaro.org Message-id: 20210121190622.22000-8-peter.maydell@linaro.org
2021-01-29hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimerPeter Maydell1-14/+14
The state struct for the CMSDK APB timer device doesn't follow our usual naming convention of camelcase -- "CMSDK" and "APB" are both acronyms, but "TIMER" is not so should not be all-uppercase. Globally rename the struct to "CMSDKAPBTimer" (bringing it into line with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains as-is because "UART" is an acronym). Commit created with: perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-7-peter.maydell@linaro.org Message-id: 20210121190622.22000-7-peter.maydell@linaro.org
2021-01-12hw/timer: Refactor NPCM7XX Timer to use CLK clockHao Wu1-21/+18
This patch makes NPCM7XX Timer to use a the timer clock generated by the CLK module instead of the magic number TIMER_REF_HZ. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-08exynos4210_mct: Use ptimer_free() in the finalize function to avoid memleaksGan Qixin1-0/+14
When running device-introspect-test, a memory leak occurred in the exynos4210_mct_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 96 byte(s) in 1 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf56b01a0 in exynos4210_mct_init /qemu/hw/timer/exynos4210_mct.c:1505 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #6 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #7 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #8 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #9 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 #10 0xaaabf6552708 in aio_bh_poll /qemu/util/async.c:164 #11 0xaaabf655f19c in aio_dispatch /qemu/util/aio-posix.c:381 #12 0xaaabf65523f4 in aio_ctx_dispatch /qemu/util/async.c:306 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-08mss-timer: Use ptimer_free() in the finalize function to avoid memleaksGan Qixin1-0/+13
When running device-introspect-test, a memory leak occurred in the mss_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 192 byte(s) in 2 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf58a0010 in mss_timer_init /qemu/hw/timer/mss-timer.c:235 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b8316c in m2sxxx_soc_initfn /qemu/hw/arm/msf2-soc.c:70 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-08exynos4210_pwm: Use ptimer_free() in the finalize function to avoid memleaksGan Qixin1-0/+11
When running device-introspect-test, a memory leak occurred in the exynos4210_pwm_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 240 byte(s) in 5 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf56a36cc in exynos4210_pwm_init /qemu/hw/timer/exynos4210_pwm.c:401 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #9 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #10 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #11 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 #12 0xaaabf6552708 in aio_bh_call /qemu/util/async.c:136 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-08allwinner-a10-pit: Use ptimer_free() in the finalize function to avoid memleaksGan Qixin1-0/+11
When running device-introspect-test, a memory leak occurred in the a10_pit_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 6 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db84 in timer_new_full /qemu/include/qemu/timer.h:523 #3 0xaaabf555db84 in timer_new /qemu/include/qemu/timer.h:544 #4 0xaaabf555db84 in timer_new_ns /qemu/include/qemu/timer.h:562 #5 0xaaabf555db84 in ptimer_init /qemu/hw/core/ptimer.c:433 #6 0xaaabf57415e8 in a10_pit_init /qemu/hw/timer/allwinner-a10-pit.c:278 #7 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #8 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #9 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #10 0xaaabf5b94680 in aw_a10_init /qemu/hw/arm/allwinner-a10.c:49 #11 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #12 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-08digic-timer: Use ptimer_free() in the finalize function to avoid memleaksGan Qixin1-0/+8
When running device-introspect-test, a memory leak occurred in the digic_timer_init function, so use ptimer_free() in the finalize function to avoid it. ASAN shows memory leak stack: Indirect leak of 288 byte(s) in 3 object(s) allocated from: #0 0xffffab97e1f0 in __interceptor_calloc (/lib64/libasan.so.5+0xee1f0) #1 0xffffab256800 in g_malloc0 (/lib64/libglib-2.0.so.0+0x56800) #2 0xaaabf555db78 in ptimer_init /qemu/hw/core/ptimer.c:432 #3 0xaaabf5b04084 in digic_timer_init /qemu/hw/timer/digic-timer.c:142 #4 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #5 0xaaabf633ca04 in object_initialize_child_with_propsv /qemu/qom/object.c:564 #6 0xaaabf633cc08 in object_initialize_child_with_props /qemu/qom/object.c:547 #7 0xaaabf5b40e84 in digic_init /qemu/hw/arm/digic.c:46 #8 0xaaabf6339f6c in object_initialize_with_type /qemu/qom/object.c:515 #9 0xaaabf633a1e0 in object_new_with_type /qemu/qom/object.c:729 #10 0xaaabf6375e40 in qmp_device_list_properties /qemu/qom/qom-qmp-cmds.c:153 #11 0xaaabf653d8ec in qmp_marshal_device_list_properties /qemu/qapi/qapi-commands-qdev.c:59 #12 0xaaabf6587d08 in do_qmp_dispatch_bh /qemu/qapi/qmp-dispatch.c:110 Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Gan Qixin <ganqixin@huawei.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-06hw/timer/slavio_timer: Allow 64-bit accessesPhilippe Mathieu-Daudé1-0/+4
Per the "NCR89C105 Chip Specification" referenced in the header: Chip-level Address Map ------------------------------------------------------------------ | 1D0 0000 -> | Counter/Timers | W,D | | 1DF FFFF | | | ... The address map indicated the allowed accesses at each address. [...] W indicates a word access, and D indicates a double-word access. The SLAVIO timer controller is implemented expecting 32-bit accesses. Commit a3d12d073e1 restricted the memory accesses to 32-bit, while the device allows 64-bit accesses. This was not an issue until commit 5d971f9e67 which reverted ("memory: accept mismatching sizes in memory_region_access_valid"). Fix by renaming .valid MemoryRegionOps as .impl, and add the valid access range (W -> 4, D -> 8). Since commit 21786c7e598 ("memory: Log invalid memory accesses") this class of bug can be quickly debugged displaying 'guest_errors' accesses, as: $ qemu-system-sparc -M SS-20 -m 256 -bios ss20_v2.25_rom -serial stdio -d guest_errors Power-ON Reset Invalid access at addr 0x0, size 8, region 'timer-1', reason: invalid size (min:4 max:4) $ qemu-system-sparc -M SS-20 -m 256 -bios ss20_v2.25_rom -monitor stdio -S (qemu) info mtree address-space: memory 0000000000000000-ffffffffffffffff (prio 0, i/o): system ... 0000000ff1300000-0000000ff130000f (prio 0, i/o): timer-1 ^^^^^^^^^ ^^^^^^^ \ memory region base address and name / (qemu) info qtree bus: main-system-bus dev: slavio_timer, id "" <-- device type name gpio-out "sysbus-irq" 17 num_cpus = 1 (0x1) mmio 0000000ff1310000/0000000000000014 mmio 0000000ff1300000/0000000000000010 <--- base address mmio 0000000ff1301000/0000000000000010 mmio 0000000ff1302000/0000000000000010 ... Reported-by: Yap KV <yapkv@yahoo.com> Buglink: https://bugs.launchpad.net/bugs/1906905 Fixes: a3d12d073e1 ("slavio_timer: convert to memory API") CC: qemu-stable@nongnu.org Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201205150903.3062711-1-f4bug@amsat.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-12-18hw/timer/renesas_tmr: silence the compiler warningsChen Qun1-0/+1
When using -Wimplicit-fallthrough in our CFLAGS, the compiler showed warning: ../hw/timer/renesas_tmr.c: In function ‘tmr_read’: ../hw/timer/renesas_tmr.c:221:19: warning: this statement may fall through [-Wimplicit-fallthrough=] 221 | } else if (ch == 0) {i | ^ ../hw/timer/renesas_tmr.c:224:5: note: here 224 | case A_TCORB: | ^~~~ Add the corresponding "fall through" comment to fix it. Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201211152426.350966-5-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-17exynos: Fix bad printf format specifiersAlex Chen2-6/+6
We should use printf format specifier "%u" instead of "%d" for argument of type "unsigned int". Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Alex Chen <alex.chen@huawei.com> Message-id: 20201111073651.72804-1-alex.chen@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-15nomaintainer: Fix Lesser GPL version numberChetan Pant3-3/+3
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. This patch contains all the files, whose maintainer I could not get from ‘get_maintainer.pl’ script. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Adapted exec.c and qdev-monitor.c to new location] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-29Merge remote-tracking branch ↵Peter Maydell2-120/+274
'remotes/pmaydell/tags/pull-target-arm-20201027-1' into staging target-arm queue: * raspi: add model of cprman clock manager * sbsa-ref: add an SBSA generic watchdog device * arm/trace: Fix hex printing * raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+ * hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly * Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support * hw/arm: fix min_cpus for xlnx-versal-virt platform * hw/arm/highbank: Silence warnings about missing fallthrough statements * linux-user: Support Aarch64 BTI * Armv7M systick: fix corner case bugs by rewriting to use ptimer # gpg: Signature made Tue 27 Oct 2020 11:27:10 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20201027-1: (48 commits) hw/timer/armv7m_systick: Rewrite to use ptimers hw/core/ptimer: Support ptimer being disabled by timer callback hw/arm/sbsa-ref: add SBSA watchdog device hw/watchdog: Implement SBSA watchdog device hw/arm/bcm2835_peripherals: connect the UART clock hw/char/pl011: add a clock input hw/misc/bcm2835_cprman: add sane reset values to the registers hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer hw/misc/bcm2835_cprman: implement clock mux behaviour hw/misc/bcm2835_cprman: add a clock mux skeleton implementation hw/misc/bcm2835_cprman: implement PLL channels behaviour hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation hw/misc/bcm2835_cprman: implement PLLs behaviour hw/misc/bcm2835_cprman: add a PLL skeleton implementation hw/arm/raspi: add a skeleton implementation of the CPRMAN hw/arm/raspi: fix CPRMAN base address hw/core/clock: trace clock values in Hz instead of ns hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macro arm/trace: Fix hex printing hw/arm/raspi: Add the Raspberry Pi 3 model A+ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/timer/armv7m_systick: Rewrite to use ptimersPeter Maydell1-72/+52
The armv7m systick timer is a 24-bit decrementing, wrap-on-zero, clear-on-write counter. Our current implementation has various bugs and dubious workarounds in it (for instance see https://bugs.launchpad.net/qemu/+bug/1872237). We have an implementation of a simple decrementing counter and we put a lot of effort into making sure it handles the interesting corner cases (like "spend a cycle at 0 before reloading") -- ptimer. Rewrite the systick timer to use a ptimer rather than a raw QEMU timer. Unfortunately this is a migration compatibility break, which will affect all M-profile boards. Among other bugs, this fixes https://bugs.launchpad.net/qemu/+bug/1872237 : now writes to SYST_CVR when the timer is enabled correctly do nothing; when the timer is enabled via SYST_CSR.ENABLE, the ptimer code will (because of POLICY_NO_IMMEDIATE_RELOAD) arrange that after one timer tick the counter is reloaded from SYST_RVR and then counts down from there, as the architecture requires. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20201015151829.14656-3-peter.maydell@linaro.org
2020-10-27hw/timer: Adding watchdog for NPCM7XX Timer.Hao Wu1-46/+220
The watchdog is part of NPCM7XX's timer module. Its behavior is controlled by the WTCR register in the timer. When enabled, the watchdog issues an interrupt signal after a pre-set amount of cycles, and issues a reset signal shortly after that. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: deleted blank line at end of npcm_watchdog_timer-test.c] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27Move npcm7xx_timer_reached_zero call out of npcm7xx_timer_pauseHavard Skinnemoen1-3/+3
This allows us to reuse npcm7xx_timer_pause for the watchdog timer. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2024-11-02 23:51:18 +0000