aboutsummaryrefslogtreecommitdiff
path: root/hw/timer/mc146818rtc.c
AgeCommit message (Collapse)AuthorFilesLines
2014-09-11mc146818rtc: add missed field to vmstatePavel Dovgalyuk1-0/+24
This patch adds irq_reinject_on_ack_count field to VMState to allow correct saving/loading the state of MC146818 RTC. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-02Fix debug print warningGonglei1-1/+1
Steps: 1.enable qemu debug print, using simply scprit as below: grep "//#define DEBUG" * -rl | xargs sed -i "s/\/\/#define DEBUG/#define DEBUG/g" 2. make -j 3. get some warning: hw/i2c/pm_smbus.c: In function 'smb_ioport_writeb': hw/i2c/pm_smbus.c:142: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/i2c/pm_smbus.c:142: warning: format '%02x' expects type 'unsigned int', but argument 3 has type 'uint64_t' hw/i2c/pm_smbus.c: In function 'smb_ioport_readb': hw/i2c/pm_smbus.c:209: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/intc/i8259.c: In function 'pic_ioport_read': hw/intc/i8259.c:373: warning: format '%02x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/input/pckbd.c: In function 'kbd_write_command': hw/input/pckbd.c:232: warning: format '%02x' expects type 'unsigned int', but argument 2 has type 'uint64_t' hw/input/pckbd.c: In function 'kbd_write_data': hw/input/pckbd.c:333: warning: format '%02x' expects type 'unsigned int', but argument 2 has type 'uint64_t' hw/isa/apm.c: In function 'apm_ioport_writeb': hw/isa/apm.c:44: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/isa/apm.c:44: warning: format '%02x' expects type 'unsigned int', but argument 3 has type 'uint64_t' hw/isa/apm.c: In function 'apm_ioport_readb': hw/isa/apm.c:67: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'hwaddr' hw/timer/mc146818rtc.c: In function 'cmos_ioport_write': hw/timer/mc146818rtc.c:394: warning: format '%02x' expects type 'unsigned int', but argument 3 has type 'uint64_t' hw/i386/pc.c: In function 'port92_write': hw/i386/pc.c:479: warning: format '%02x' expects type 'unsigned int', but argument 2 has type 'uint64_t' Fix them. Cc: qemu-trivial@nongnu.org Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-08-27mc146818rtc: reinitialize irq_reinject_on_ack_count on resetPaolo Bonzini1-0/+1
This field was forgotten, and it makes the state after reset non-deterministic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-10mc146818rtc: register the clock reset notifier on the right clockPaolo Bonzini1-1/+1
Commit 884f17c (aio / timers: Convert rtc_clock to be a QEMUClockType, 2013-08-21) erroneously changed an occurrence of rtc_clock to QEMU_CLOCK_REALTIME, which broke the RTC reset notifier in mc146818rtc. Fix this. I redid the patch myself since the original reporter did not sign off on his. Cc: qemu-stable@nongnu.org Reported-by: Lb peace <peaceustc@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-01mc146818rtc: add "rtc-time" link to "/machine/rtc"Marcelo Tosatti1-0/+9
Add a link to rtc under /machine providing a stable location for management apps to query the value of the time. The link should be added by any object that sends RTC_TIME_CHANGE events. {"execute":"qom-get","arguments":{"path":"/machine","property":"rtc-time"} } Suggested by Paolo Bonzini and Andreas Faerber. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-29mc146818rtc: add rtc-reset-reinjection QMP commandMarcelo Tosatti1-0/+18
It is necessary to reset RTC interrupt reinjection backlog if guest time is synchronized via a different mechanism, such as QGA's guest-set-time command. Failing to do so causes both corrections to be applied (summed), resulting in an incorrect guest time. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23qapi event: convert RTC_CHANGEWenchao Xia1-1/+2
This patch also eliminates build time warning caused by no caller of monitor_qapi_event_throttle(). Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (x86)Juan Quintela1-2/+1
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-15qapi: Replace uncommon use of the error API by the common oneMarkus Armbruster1-2/+22
We commonly use the error API like this: err = NULL; foo(..., &err); if (err) { goto out; } bar(..., &err); Every error source is checked separately. The second function is only called when the first one succeeds. Both functions are free to pass their argument to error_set(). Because error_set() asserts no error has been set, this effectively means they must not be called with an error set. The qapi-generated code uses the error API differently: // *errp was initialized to NULL somewhere up the call chain frob(..., errp); gnat(..., errp); Errors accumulate in *errp: first error wins, subsequent errors get dropped. To make this work, the second function does nothing when called with an error set. Requires non-null errp, or else the second function can't see the first one fail. This usage has also bled into visitor tests, and two device model object property getters rtc_get_date() and balloon_stats_get_all(). With the "accumulate" technique, you need fewer error checks in callers, and buy that with an error check in every callee. Can be nice. However, mixing the two techniques is confusing. You can't use the "accumulate" technique with functions designed for the "check separately" technique. You can use the "check separately" technique with functions designed for the "accumulate" technique, but then error_set() can't catch you setting an error more than once. Standardize on the "check separately" technique for now, because it's overwhelmingly prevalent. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15hw: Don't call visit_end_struct() after visit_start_struct() failsMarkus Armbruster1-8/+15
When visit_start_struct() fails, visit_end_struct() must not be called. rtc_get_date() and balloon_stats_all() call it anyway. As far as I can tell, they're only used with the string output visitor, which doesn't care. Fix them anyway. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-14qdev: Add enum property types to QAPI schemaPaolo Bonzini1-7/+7
Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23isa: Clean up use of cannot_instantiate_with_device_add_yetMarkus Armbruster1-1/+2
Drop it when there's no obvious reason why device_add could not work. Else keep and document why. * isa-fdc: drop * i8042: drop, even though its I/O base is hardcoded (because you could conceivably still add one to a board that has none), and even though PC board code wires up the A20 line (because that wiring is optional) * port92: keep because it needs additional wiring by port92_init() * mc146818rtc: keep because it needs to be wired up by rtc_init() * m48t59_isa: keep because needs to be wired up by m48t59_init_isa() * isa-pit, kvm-pit: keep (in their abstract base pic-common) because the PIT needs additional wiring by board code, depending on HPET presence * pcspk: keep because of pointer property pit, and because realize sets global pcspk_state * vmmouse: keep because of pointer property ps2_mouse * vmport: keep because realize sets global port_state * isa-i8259, kvm-i8259: keep (in their abstract base pic-common), because the PICs' IRQ input lines are set up by board code, and the wiring of the slave to the master is hard-coded in device model code Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23qdev: Replace no_user by cannot_instantiate_with_device_add_yetMarkus Armbruster1-1/+1
In an ideal world, machines can be built by wiring devices together with configuration, not code. Unfortunately, that's not the world we live in right now. We still have quite a few devices that need to be wired up by code. If you try to device_add such a device, it'll fail in sometimes mysterious ways. If you're lucky, you get an unmysterious immediate crash. To protect users from such badness, DeviceClass member no_user used to make device models unavailable with -device / device_add, but that regressed in commit 18b6dad. The device model is still omitted from help, but is available anyway. Attempts to fix the regression have been rejected with the argument that the purpose of no_user isn't clear, and it's prone to misuse. This commit clarifies no_user's purpose. Anthony suggested to rename it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which I shorten somewhat to keep checkpatch happy. While there, make it bool. Every use of cannot_instantiate_with_device_add_yet gets a FIXME comment asking for rationale. The next few commits will clean them all up, either by providing a rationale, or by getting rid of the use. With that done, the regression fix is hopefully acceptable. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05rtc: remove dead SQW IRQ codeJan Kiszka1-8/+1
This was once introduced by commit 100d9891d6 but was never used in-tree and then got broken by commit 32e0c8260d. Time to clean up. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Message-id: 520B6A27.4040207@siemens.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-08-22aio / timers: Switch entire codebase to the new timer APIAlex Bligh1-8/+8
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22aio / timers: Convert rtc_clock to be a QEMUClockTypeAlex Bligh1-13/+15
Convert rtc_clock to be a QEMUClockType Move rtc_clock users to use the new API Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22aio / timers: Rename qemu_timer_* functionsAlex Bligh1-3/+3
Rename four functions in preparation for new API. Rename qemu_timer_expired to timer_expired Rename qemu_timer_expire_time_ns to timer_expire_time_ns Rename qemu_timer_pending to timer_pending Rename qemu_timer_expired_ns to timer_expired_ns Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-04hw/t*: pass owner to memory_region_init* functionsPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-07isa: Use realizefn for ISADeviceAndreas Färber1-9/+9
Drop ISADeviceClass::init and the resulting no-op initfn and let children implement their own realizefn. Adapt error handling. Split off an instance_init where sensible. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01pc: Update rtc_cmos on CPU hot-plugIgor Mammedov1-0/+7
It provides updated currently available CPUs count to BIOS on reboot. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-29mc146818rtc: QOM'ifyAndreas Färber1-16/+20
Introduce type constant and cast macro to obsolete DO_UPCAST(). Prepares for ISA realizefn. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Message-id: 1367093935-29091-9-git-send-email-afaerber@suse.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-08hw: move MC146818RTC to hw/timer/, configure via default-configs/Paolo Bonzini1-0/+913
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-12-28 20:29:38 +0000