aboutsummaryrefslogtreecommitdiff
path: root/hw/sparc64
AgeCommit message (Collapse)AuthorFilesLines
2020-06-23fdc: Reject clash between -drive if=floppy and -global isa-fdcMarkus Armbruster1-8/+1
The floppy controller devices desugar their drive properties into floppy devices (since commit a92bd191a4 "fdc: Move qdev properties to FloppyDrive", v2.8.0). This involves some bad magic in fdctrl_connect_drives(), and exists for backward compatibility. The functions for boards to create floppy controller devices fdctrl_init_isa(), fdctrl_init_sysbus(), and sun4m_fdctrl_init() desugar -drive if=floppy to these floppy controller drive properties. If you use both -drive if=floppy (or its -fda / -fdb sugar) and -global isa-fdc for the same floppy device, -global silently loses the conflict, and both backends involved end up with the floppy device frontend attached, as demonstrated by iotest 172 (see commit before previous). This is wrong. Desugar -drive if=floppy straight to floppy devices instead, with helper fdctrl_init_drives(). The conflict now gets rejected cleanly: first, fdctrl_connect_drives() creates the floppy for the controller's property, then fdctrl_init_drives() attempts to create the floppy for -drive if=floppy, but fails because the unit is already in use. Output of iotest 172 changes in three ways: 1. The clash gets rejected. 2. In one test case, "info qtree" has the floppy devices swapped, and "info block" has their QOM paths swapped. This is because the floppy device for -fda now gets created after the one for -global isa-fdc.driveB. 3. The error message for -global floppy.drive=floppy0 changes. Before the patch, we set isa-fdc.driveA to -fda's block backend, then create the floppy device for it, then move the backend from isa-fdc.driveA to floppy.drive. Floppy creation fails when applying -global floppy.drive=floppy0, because floppy0 is still attached to isa-fdc. After the patch, we create the floppy for -fda, then set its drive property to floppy0. Now floppy creation succeeds, but setting the drive property fails, because -global already set it. Yes, this is exasperatingly complicated. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200622094227.1271650-5-armbru@redhat.com>
2020-06-15sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster1-6/+6
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15isa: Convert uses of isa_create() with CoccinelleMarkus Armbruster1-2/+4
Replace dev = isa_create(bus, type_name); ... qdev_init_nofail(dev); by dev = isa_new(type_name); ... isa_realize_and_unref(dev, bus, &error_fatal); Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. Coccinelle script: @@ expression dev, bus, expr; expression list args; expression d; @@ - dev = isa_create(bus, args); + dev = isa_new(args); ( d = &dev->qdev; | d = DEVICE(dev); ) ... when != dev = expr - qdev_init_nofail(d); + isa_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = isa_create(bus, args); + dev = isa_new(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + isa_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = DEVICE(isa_create(bus, args)); + ISADevice *isa_dev; // TODO move + isa_dev = isa_new(args); + dev = DEVICE(isa_dev); ... when != dev = expr - qdev_init_nofail(dev); + isa_realize_and_unref(isa_dev, bus, &error_fatal); Missing #include "qapi/error.h" added manually, whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-20-armbru@redhat.com>
2020-06-15pci: Convert uses of pci_create() etc. manuallyMarkus Armbruster1-4/+8
Same transformation as in the previous commit. Manual, because convincing Coccinelle to transform these cases is not worthwhile. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-17-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-15pci: Convert uses of pci_create() etc. with CoccinelleMarkus Armbruster1-4/+4
Replace dev = pci_create(bus, type_name); ... qdev_init_nofail(dev); by dev = pci_new(type_name); ... pci_realize_and_unref(dev, bus, &error_fatal); and similarly for pci_create_multifunction(). Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. Coccinelle script: @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; expression d; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ( d = &dev->qdev; | d = DEVICE(dev); ) ... when != dev = expr - qdev_init_nofail(d); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = DEVICE(pci_create(bus, args)); + PCIDevice *pci_dev; // TODO move + pci_dev = pci_new(args); + dev = DEVICE(pci_dev); ... when != dev = expr - qdev_init_nofail(dev); + pci_realize_and_unref(pci_dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create_multifunction(bus, args); + dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, expr; expression list args; identifier dev; @@ - PCIDevice *dev = pci_create_multifunction(bus, args); + PCIDevice *dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create_multifunction(bus, args); + dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + pci_realize_and_unref(dev, bus, &error_fatal); Missing #include "qapi/error.h" added manually, whitespace changes minimized manually, @pci_dev declarations moved manually. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-16-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster1-12/+12
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-09hw/sparc64/niagara: Remove duplicated NIAGARA_UART_BASE definitionPhilippe Mathieu-Daudé1-1/+0
NIAGARA_UART_BASE is already defined few lines earlier. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Message-Id: <20200608172144.20461-3-f4bug@amsat.org>
2020-06-09hw/sparc64/niagara: Map the UART device unconditionallyPhilippe Mathieu-Daudé1-4/+2
The UART is present on the machine regardless there is a character device connected to it. Map it unconditionally. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Message-Id: <20200608172144.20461-4-f4bug@amsat.org>
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster1-1/+1
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-03-17hw/ide: Do ide_drive_get() within pci_ide_create_devs()BALATON Zoltan1-5/+1
The pci_ide_create_devs() function takes a hd_table parameter but all callers just pass what ide_drive_get() returns so we can do it locally simplifying callers and removing hd_table parameter. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: e9713fdded4d212fa68ed03b844e531934226a6f.1584457537.git.balaton@eik.bme.hu Signed-off-by: John Snow <jsnow@redhat.com>
2020-02-28hw: Make MachineClass::is_default a boolean typePhilippe Mathieu-Daudé1-1/+1
There's no good reason for it to be type int, change it to bool. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200207161948.15972-3-philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-02-19sparc/niagara: use memdev for RAMIgor Mammedov1-5/+2
memory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing MachineClass::default_ram_id and using MachineState::ram instead of manually initializing RAM memory region. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200219160953.13771-72-imammedo@redhat.com>
2020-01-29hw/core/loader: Let load_elf() populate a field with CPU-specific flagsAleksandar Markovic1-2/+3
While loading the executable, some platforms (like AVR) need to detect CPU type that executable is built for - and, with this patch, this is enabled by reading the field 'e_flags' of the ELF header of the executable in question. The change expands functionality of the following functions: - load_elf() - load_elf_as() - load_elf_ram() - load_elf_ram_sym() The argument added to these functions is called 'pflags' and is of type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word' being the type of the field 'e_flags', in both 32-bit and 64-bit variants of ELF header). Callers are allowed to pass NULL as that argument, and in such case no lookup to the field 'e_flags' will happen, and no information will be returned, of course. CC: Richard Henderson <rth@twiddle.net> CC: Peter Maydell <peter.maydell@linaro.org> CC: Edgar E. Iglesias <edgar.iglesias@gmail.com> CC: Michael Walle <michael@walle.cc> CC: Thomas Huth <huth@tuxfamily.org> CC: Laurent Vivier <laurent@vivier.eu> CC: Philippe Mathieu-Daudé <f4bug@amsat.org> CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> CC: Aurelien Jarno <aurelien@aurel32.net> CC: Jia Liu <proljc@gmail.com> CC: David Gibson <david@gibson.dropbear.id.au> CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: BALATON Zoltan <balaton@eik.bme.hu> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: Thomas Huth <thuth@redhat.com> CC: Artyom Tarasenko <atar4qemu@gmail.com> CC: Fabien Chouteau <chouteau@adacore.com> CC: KONRAD Frederic <frederic.konrad@adacore.com> CC: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau1-3/+3
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-07hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOFPhilippe Mathieu-Daudé1-0/+1
Only the OpenBIOS and SLOF firmwares use the CHRP NVRAM layout. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191231183216.6781-14-philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-24hw: Move sun4v hypervisor RTC from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé1-1/+1
Move RTC devices under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Message-Id: <20191003230404.19384-7-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move M48T59 device from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé1-1/+1
The M48T59 is a Real Time Clock, not a timer. Move it under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191003230404.19384-5-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-23sparc64: use memory_region_allocate_system_memory() only for '-m' specified RAMIgor Mammedov1-12/+13
memory_region_allocate_system_memory() was designed to be called for allocating inital RAM. Using it mutiple times within one board is not supported and could fail if -mem-path with non hugepage path is used. Keep using memory_region_allocate_system_memory() only for initial RAM and use memory_region_init_ram() for the rest fixed size regions. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20191008113318.7012-2-imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-20hw/misc: Add a config switch for the "unimplemented" deviceThomas Huth1-0/+1
The device is only used by some few boards. Let's use a proper Kconfig switch so that we only compile this code if we really need it. Message-Id: <20190817101931.28386-8-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster1-0/+1
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Include sysemu/sysemu.h a lot lessMarkus Armbruster1-1/+1
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a "qdev: add qdev_add_vm_change_state_handler()". This is a bad idea: hw/qdev-core.h is widely included. Move the declaration of qdev_add_vm_change_state_handler() to sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h. Touching sysemu/sysemu.h now recompiles some 1800 objects. qemu/uuid.h also drops from 5400 to 1800. A few more headers show smaller improvement: qemu/notify.h drops from 5600 to 5200, qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from 5500 to 5000. Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190812052359.30071-28-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster2-2/+0
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster1-0/+2
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include sysemu/reset.h a lot lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-07-05hw: Replace global smp variables with MachineState for all remaining archsLike Xu1-2/+2
The global smp variables in alpha/hppa/mips/openrisc/sparc*/xtensa codes are replaced with smp properties from MachineState. A local variable of the same name would be introduced in the declaration phase if it's used widely in the context OR replace it on the spot if it's only used once. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190518205428.90532-10-like.xu@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster1-1/+0
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-06-10target/sparc: Use env_cpu, env_archcpuRichard Henderson1-1/+1
Cleanup in the boilerplate that each target must define. Replace sparc_env_get_cpu with env_archcpu. The combination CPU(sparc_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-23hw/sparc64: Implement fw_cfg_arch_key_name()Philippe Mathieu-Daudé1-0/+19
Implement fw_cfg_arch_key_name(), which returns the name of a sparc64-specific key. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190422195020.1494-8-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-28Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+1
* Kconfig improvements (msi_nonbroken, imply for default PCI devices) * intel-iommu: sharing passthrough FlatViews (Peter) * Fix for SEV with VFIO (Brijesh) * Allow compilation without CONFIG_PARALLEL (Thomas) # gpg: Signature made Thu 21 Mar 2019 16:42:24 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (23 commits) virtio-vga: only enable for specific boards config-all-devices.mak: rebuild on reconfigure minikconf: fix parser typo intel-iommu: optimize nodmar memory regions test-announce-self: convert to qgraph hw/alpha/Kconfig: DP264 hardware requires e1000 network card hw/hppa/Kconfig: Dino board requires e1000 network card hw/sh4/Kconfig: r2d machine requires the rtl8139 network card hw/ppc/Kconfig: e500 based machines require virtio-net-pci device hw/ppc/Kconfig: Bamboo machine requires e1000 network card hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices hw/mips/Kconfig: Malta machine requires the pcnet network card hw/i386/Kconfig: enable devices that can be created by default hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI hw/isa/Kconfig: i82378 SuperIO requires PC speaker device prep: do not select I82374 hw/i386/Kconfig: PC uses I8257, not I82374 hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL target/i386: sev: Do not pin the ram device memory region memory: Fix the memory region type assignment order ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/rdma/Makefile.objs # hw/riscv/sifive_plic.c
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster1-3/+3
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-18hw/char/parallel: Make it possible to compile also without CONFIG_PARALLELThomas Huth1-1/+1
For the downstream distribution of QEMU, we want to compile without CONFIG_PARALLEL. Commit 9157eee1b1c076ff3 already moved the function parallel_hds_isa_init() (which is still required for linking) into a file that is included anyway, but commit bb3d5ea858e7f888563a moved it to a separate file which is only compiled again if CONFIG_PARALLEL is set. To be able to link QEMU again without CONFIG_PARALLEL, the file should be considered for linking for all targets that have CONFIG_ISA_BUS. And while we're at it, add a proper comment in there with the rationale for the separate file. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1552297854-25847-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07sparc64-softmmu.mak: express dependencies with KconfigPaolo Bonzini1-0/+13
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07isa: express dependencies with kconfigPaolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-36-yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini1-0/+5
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-14hw/sparc64: Explicitly set default_display = "std"Thomas Huth1-0/+2
The sun4uv_init() function expects vga_interface_type to be either VGA_STD or VGA_NONE and sets up a stdvga device or no vga card accordingly. However, the code in vl.c prefers the Cirrus VGA card to stdvga if it is available and the user and the machine did not specify anything else. So far this has not been a problem, since the Cirrus VGA was not linked into the sparc64 target. But with the upcoming Kconfig build system, all theoretically possible PCI cards will be enabled by default, so the Cirrus VGA card might become available on the sparc64 target, too. vl.c then picks the wrong card, causing sun4uv_init() to abort. Thus let's make it explicit that we always want stdvga for sparc64 and so set default_display = "std" for these machines. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <1550041639-10232-1-git-send-email-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-02-07Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20190206' ↵Peter Maydell1-1/+15
into staging qemu-sparc queue # gpg: Signature made Wed 06 Feb 2019 21:25:18 GMT # gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F # gpg: issuer "mark.cave-ayland@ilande.co.uk" # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full] # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * remotes/mcayland/tags/qemu-sparc-20190206: sun4m: pass initrd size to OpenBIOS via fw_cfg interface sun4u: add power_mem_read routine hw/sparc64: Create VGA device only if it has really been requested Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-07Merge remote-tracking branch ↵Peter Maydell1-1/+0
'remotes/vivier2/tags/trivial-patches-pull-request' into staging Trivial patches: * Update copyright * Fix LGPL in target/moxie * configure portability fix * Drop useless inclusion of "hw/i386/pc.h" * Mark the cpu-cluster device with user_creatable = false * tsc210x: Fix building with no verbosity # gpg: Signature made Wed 06 Feb 2019 15:27:35 GMT # gpg: using RSA key F30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-patches-pull-request: hw/input/tsc210x: Fix building with no verbosity hw/cpu/cluster: Mark the cpu-cluster device with user_creatable = false hw/unicore32/puv3: Drop useless inclusion of "hw/i386/pc.h" hw/sparc64/sun4u: Drop useless inclusion of "hw/i386/pc.h" configure: Avoid non-portable 'test -o/-a' target/moxie: Fix LGPL information in the file headers qemu-common.h: Update copyright string for 2019 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-06sun4u: add power_mem_read routinePrasad J Pandit1-0/+6
Define skeleton 'power_mem_read' routine. Avoid NULL dereference. Reported-by: Fakhri Zulkifli <mohdfakhrizulkifli@gmail.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-02-06hw/sparc64: Create VGA device only if it has really been requestedThomas Huth1-1/+9
The sun4u/sun4v machine currently always creates a VGA device, even if the user started QEMU with "-nodefaults" or "-vga none". That's likely not what the users expect in this case, so add a check whether the VGA adapter has really been requested. Signed-off-by: Thomas Huth <huth@tuxfamily.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-02-06hw/sparc64/sun4u: Drop useless inclusion of "hw/i386/pc.h"Philippe Mathieu-Daudé1-1/+0
In 47973a2dbf we split the last generic chipset out of the PC board, but forgot to remove the include of "hw/i386/pc.h". Since it is now unused, remove it. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20190204210433.26088-2-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-02-05hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64Yang Zhong1-3/+3
Add the new configs to default-configs/sparc64-sofmmu.mak. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-20-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05elf: Add optional function ptr to load_elf() to parse ELF notesLiam Merwick1-2/+2
This patch adds an optional function pointer, 'elf_note_fn', to load_elf() which causes load_elf() to additionally parse any ELF program headers of type PT_NOTE and check to see if the ELF Note is of the type specified by the 'translate_opaque' arg. If a matching ELF Note is found then the specfied function pointer is called to process the ELF note. Passing a NULL function pointer results in ELF Notes being skipped. The first consumer of this functionality is the PVHboot support which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while loading the uncompressed kernel binary in order to discover the boot entry address for the x86/HVM direct boot ABI. Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-24hw/sparc64/niagara: Model the I/O Bridge with the 'unimplemented_device'Philippe Mathieu-Daudé1-2/+2
Since the I/O Bridge device is not implemented, Use the TYPE_UNIMPLEMENTED_DEVICE which suits better: if the user asks for 'unimp' warnings via the -d option then all accesses will generate logging. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Message-Id: <20181002212522.23303-10-f4bug@amsat.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-09-14sun4u: implement custom FWPathProviderMark Cave-Ayland1-0/+58
This enables the correct generation of bootdevice fw paths for in-built IDE and virtio-pci-blk devices suitable for OpenBIOS. Note we also set the MachineClass ignore_boot_device_suffixes property to true to allow the correct customisation of the disk node names as required. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-08-20sun4u: ensure kernel_top is always initialisedMark Cave-Ayland1-2/+2
Valgrind reports that when loading a non-ELF kernel, kernel_top may be used uninitialised when checking for an initrd. Since there are no known non-ELF kernels for SPARC64 then we can simply initialise kernel_top to 0 and then skip the initrd load process if it hasn't been set by load_elf(). Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2018-07-02Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2-3/+4
* IEC units series (Philippe) * Hyper-V PV TLB flush (Vitaly) * git archive detection (Daniel) * host serial passthrough fix (David) * NPT support for SVM emulation (Jan) * x86 "info mem" and "info tlb" fix (Doug) # gpg: Signature made Mon 02 Jul 2018 16:18:21 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (50 commits) tcg: simplify !CONFIG_TCG handling of tb_invalidate_* i386/monitor.c: make addresses canonical for "info mem" and "info tlb" target-i386: Add NPT support serial: Open non-block bsd-user: Use the IEC binary prefix definitions linux-user: Use the IEC binary prefix definitions tests/crypto: Use the IEC binary prefix definitions vl: Use the IEC binary prefix definitions monitor: Use the IEC binary prefix definitions cutils: Do not include "qemu/units.h" directly hw/rdma: Use the IEC binary prefix definitions hw/virtio: Use the IEC binary prefix definitions hw/vfio: Use the IEC binary prefix definitions hw/sd: Use the IEC binary prefix definitions hw/usb: Use the IEC binary prefix definitions hw/net: Use the IEC binary prefix definitions hw/i386: Use the IEC binary prefix definitions hw/ppc: Use the IEC binary prefix definitions hw/mips: Use the IEC binary prefix definitions hw/mips/r4k: Constify params_size ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-02hw/sparc: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé2-3/+4
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180625124238.25339-19-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02loader: Check access size when calling rom_ptr() to avoid crashesThomas Huth1-2/+2
The rom_ptr() function allows direct access to the ROM blobs that we load during startup. However, there are currently no checks for the size of the accesses, so it's currently possible to crash QEMU for example with: $ echo "Insane in the mainframe" > /tmp/test.txt $ s390x-softmmu/qemu-system-s390x -kernel /tmp/test.txt -append xyz Segmentation fault (core dumped) $ s390x-softmmu/qemu-system-s390x -kernel /tmp/test.txt -initrd /tmp/test.txt Segmentation fault (core dumped) $ echo -n HdrS > /tmp/hdr.txt $ sparc64-softmmu/qemu-system-sparc64 -kernel /tmp/hdr.txt -initrd /tmp/hdr.txt Segmentation fault (core dumped) We need a possibility to check the size of the ROM area that we want to access, thus let's add a size parameter to the rom_ptr() function to avoid these problems. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1530005740-25254-1-git-send-email-thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
generated by cgit v1.1 at 2024-12-28 10:40:35 +0000