aboutsummaryrefslogtreecommitdiff
path: root/hw/sd
AgeCommit message (Collapse)AuthorFilesLines
2022-07-12block: Change blk_{pread,pwrite}() param orderAlberto Faria1-2/+2
Swap 'buf' and 'bytes' around for consistency with blk_co_{pread,pwrite}(), and in preparation to implement these functions using generated_co_wrapper. Callers were updated using this Coccinelle script: @@ expression blk, offset, buf, bytes, flags; @@ - blk_pread(blk, offset, buf, bytes, flags) + blk_pread(blk, offset, bytes, buf, flags) @@ expression blk, offset, buf, bytes, flags; @@ - blk_pwrite(blk, offset, buf, bytes, flags) + blk_pwrite(blk, offset, bytes, buf, flags) It had no effect on hw/block/nand.c, presumably due to the #if, so that file was updated manually. Overly-long lines were then fixed by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-4-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-07-12block: Add a 'flags' param to blk_pread()Alberto Faria1-1/+1
For consistency with other I/O functions, and in preparation to implement it using generated_co_wrapper. Callers were updated using this Coccinelle script: @@ expression blk, offset, buf, bytes; @@ - blk_pread(blk, offset, buf, bytes) + blk_pread(blk, offset, buf, bytes, 0) It had no effect on hw/block/nand.c, presumably due to the #if, so that file was updated manually. Overly-long lines were then fixed by hand. Signed-off-by: Alberto Faria <afaria@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220705161527.1054072-3-afaria@redhat.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2022-05-30hw/sd/allwinner-sdhost: report FIFO water level as 1 when data readyIcenowy Zheng1-0/+7
U-Boot queries the FIFO water level to reduce checking status register when doing PIO SD card operation. Report a FIFO water level of 1 when data is ready, to prevent the code from trying to read 0 words from the FIFO each time. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Message-id: 20220520124200.2112699-1-uwu@icenowy.me Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau1-1/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-21hw/sd/sdhci: Prohibit DMA accesses to devicesPhilippe Mathieu-Daudé1-2/+3
The issue reported by OSS-Fuzz produces the following backtrace: ==447470==ERROR: AddressSanitizer: heap-buffer-overflow READ of size 1 at 0x61500002a080 thread T0 #0 0x71766d47 in sdhci_read_dataport hw/sd/sdhci.c:474:18 #1 0x7175f139 in sdhci_read hw/sd/sdhci.c:1022:19 #2 0x721b937b in memory_region_read_accessor softmmu/memory.c:440:11 #3 0x72171e51 in access_with_adjusted_size softmmu/memory.c:554:18 #4 0x7216f47c in memory_region_dispatch_read1 softmmu/memory.c:1424:16 #5 0x7216ebb9 in memory_region_dispatch_read softmmu/memory.c:1452:9 #6 0x7212db5d in flatview_read_continue softmmu/physmem.c:2879:23 #7 0x7212f958 in flatview_read softmmu/physmem.c:2921:12 #8 0x7212f418 in address_space_read_full softmmu/physmem.c:2934:18 #9 0x721305a9 in address_space_rw softmmu/physmem.c:2962:16 #10 0x7175a392 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12 #11 0x7175a0ea in dma_memory_rw include/sysemu/dma.h:132:12 #12 0x71759684 in dma_memory_read include/sysemu/dma.h:152:12 #13 0x7175518c in sdhci_do_adma hw/sd/sdhci.c:823:27 #14 0x7174bf69 in sdhci_data_transfer hw/sd/sdhci.c:935:13 #15 0x7176aaa7 in sdhci_send_command hw/sd/sdhci.c:376:9 #16 0x717629ee in sdhci_write hw/sd/sdhci.c:1212:9 #17 0x72172513 in memory_region_write_accessor softmmu/memory.c:492:5 #18 0x72171e51 in access_with_adjusted_size softmmu/memory.c:554:18 #19 0x72170766 in memory_region_dispatch_write softmmu/memory.c:1504:16 #20 0x721419ee in flatview_write_continue softmmu/physmem.c:2812:23 #21 0x721301eb in flatview_write softmmu/physmem.c:2854:12 #22 0x7212fca8 in address_space_write softmmu/physmem.c:2950:18 #23 0x721d9a53 in qtest_process_command softmmu/qtest.c:727:9 A DMA descriptor is previously filled in RAM. An I/O access to the device (frames #22 to #16) start the DMA engine (frame #13). The engine fetch the descriptor and execute the request, which itself accesses the SDHCI I/O registers (frame #1 and #0), triggering a re-entrancy issue. Fix by prohibit transactions from the DMA to devices. The DMA engine is thus restricted to memories. Reported-by: OSS-Fuzz (Issue 36391) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/451 Message-Id: <20211215205656.488940-3-philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-03-21hw/sd/sdhci: Honor failed DMA transactionsPhilippe Mathieu-Daudé1-9/+25
DMA transactions might fail. The DMA API returns a MemTxResult, indicating such failures. Do not ignore it. On failure, raise the ADMA error flag and eventually triggering an IRQ (see spec chapter 1.13.5: "ADMA2 States"). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20211215205656.488940-2-philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-02-21Mark remaining global TypeInfo instances as constBernhard Beschow5-5/+5
More than 1k of TypeInfo instances are already marked as const. Mark the remaining ones, too. This commit was created with: git grep -z -l 'static TypeInfo' -- '*.c' | \ xargs -0 sed -i 's/static TypeInfo/static const TypeInfo/' Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Corey Minyard <cminyard@mvista.com> Message-id: 20220117145805.173070-2-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-04hw/sd: Add SDHC support for SD card SPI-modeFrank Chang1-7/+17
In SPI-mode, SD card's OCR register: Card Capacity Status (CCS) bit is not set to 1 correclty when the assigned SD image size is larger than 2GB (SDHC). This will cause the SD card to be indentified as SDSC incorrectly. CCS bit should be set to 1 if we are using SDHC. Also, as there's no power up emulation in SPI-mode. The OCR register: Card power up status bit bit (busy) should also be set to 1 when reset. (busy bit is set to LOW if the card has not finished the power up routine.) Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20211228125719.14712-1-frank.chang@sifive.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-01-04hw/sd/sdcard: Rename Write Protect Group variablesPhilippe Mathieu-Daudé1-14/+14
'wp_groups' holds a bitmap, rename it as 'wp_group_bmap'. 'wpgrps_size' is the bitmap size (in bits), rename it as 'wp_group_bits'. Patch created mechanically using: $ sed -i -e s/wp_groups/wp_group_bmap/ \ -e s/wpgrps_size/wp_group_bits/ hw/sd/sd.c Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210728181728.2012952-4-f4bug@amsat.org> Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
2021-12-30dma: Let dma_memory_read/write() take MemTxAttrs argumentPhilippe Mathieu-Daudé2-19/+30
Let devices specify transaction attributes when calling dma_memory_read() or dma_memory_write(). Patch created mechanically using spatch with this script: @@ expression E1, E2, E3, E4; @@ ( - dma_memory_read(E1, E2, E3, E4) + dma_memory_read(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED) | - dma_memory_write(E1, E2, E3, E4) + dma_memory_write(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED) ) Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20211223115554.3155328-6-philmd@redhat.com>
2021-12-15hw/sd/ssi-sd: Do not create SD card within controller's realizeMarkus Armbruster1-28/+1
ssi_sd_realize() creates an "sd-card" device. This is inappropriate, and marked FIXME. Move it to the boards that create these devices. Prior art: commit eb4f566bbb for device "generic-sdhci", and commit 26c607b86b for device "pl181". The device remains not user-creatable, because its users should (and do) wire up its GPIO chip-select line. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Alistair Francis <Alistair.Francis@wdc.com> Cc: Bin Meng <bin.meng@windriver.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org> Cc: qemu-arm@nongnu.org Cc: qemu-riscv@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20211117163409.3587705-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2021-11-02hw/sd: add nuvoton MMCShengtan Mao2-0/+183
Signed-off-by: Shengtan Mao <stmao@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Chris Rauer <crauer@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20211008002628.1958285-2-wuhaotsh@google.com> [rth: Fix typos of "nonexistent"] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-10-22speed/sdhci: Add trace eventsCédric Le Goater2-0/+9
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-Id: <20211018132609.160008-6-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-30qbus: Rename qbus_create_inplace() to qbus_init()Peter Maydell6-12/+9
Rename qbus_create_inplace() to qbus_init(); this is more in line with our usual naming convention for functions that in-place initialize objects. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20210923121153.23754-5-peter.maydell@linaro.org
2021-08-03hw/sd/sdcard: Fix assertion accessing out-of-range addresses with CMD30Philippe Mathieu-Daudé1-1/+1
OSS-Fuzz found sending illegal addresses when querying the write protection bits triggers the assertion added in commit 84816fb63e5 ("hw/sd/sdcard: Assert if accessing an illegal group"): qemu-fuzz-i386-target-generic-fuzz-sdhci-v3: ../hw/sd/sd.c:824: uint32_t sd_wpbits(SDState *, uint64_t): Assertion `wpnum < sd->wpgrps_size' failed. #3 0x7f62a8b22c91 in __assert_fail #4 0x5569adcec405 in sd_wpbits hw/sd/sd.c:824:9 #5 0x5569adce5f6d in sd_normal_command hw/sd/sd.c:1389:38 #6 0x5569adce3870 in sd_do_command hw/sd/sd.c:1737:17 #7 0x5569adcf1566 in sdbus_do_command hw/sd/core.c:100:16 #8 0x5569adcfc192 in sdhci_send_command hw/sd/sdhci.c:337:12 #9 0x5569adcfa3a3 in sdhci_write hw/sd/sdhci.c:1186:9 #10 0x5569adfb3447 in memory_region_write_accessor softmmu/memory.c:492:5 It is legal for the CMD30 to query for out-of-range addresses. Such invalid addresses are simply ignored in the response (write protection bits set to 0). In commit 84816fb63e5 ("hw/sd/sdcard: Assert if accessing an illegal group") we misplaced the assertion *before* we test the address is in range. Move it *after*. Include the qtest reproducer provided by Alexander Bulekov: $ make check-qtest-i386 ... Running test qtest-i386/fuzz-sdcard-test qemu-system-i386: ../hw/sd/sd.c:824: sd_wpbits: Assertion `wpnum < sd->wpgrps_size' failed. Cc: qemu-stable@nongnu.org Reported-by: OSS-Fuzz (Issue 29225) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Fixes: 84816fb63e5 ("hw/sd/sdcard: Assert if accessing an illegal group") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/495 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210802235524.3417739-3-f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Alexander Bulekov <alxndr@bu.edu>
2021-08-03hw/sd/sdcard: Document out-of-range addresses for SEND_WRITE_PROTPhilippe Mathieu-Daudé1-1/+8
Per the 'Physical Layer Simplified Specification Version 3.01', Table 4-22: 'Block Oriented Write Protection Commands' SEND_WRITE_PROT (CMD30) If the card provides write protection features, this command asks the card to send the status of the write protection bits [1]. [1] 32 write protection bits (representing 32 write protect groups starting at the specified address) [...] The last (least significant) bit of the protection bits corresponds to the first addressed group. If the addresses of the last groups are outside the valid range, then the corresponding write protection bits shall be set to 0. Split the if() statement (without changing the behaviour of the code) to better position the description comment. Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210802235524.3417739-2-f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Alexander Bulekov <alxndr@bu.edu>
2021-07-12hw/sd/sdcard: Check for valid address range in SEND_WRITE_PROT (CMD30)Philippe Mathieu-Daudé1-0/+5
OSS-Fuzz found sending illegal addresses when querying the write protection bits triggers an assertion: qemu-fuzz-i386: hw/sd/sd.c:824: uint32_t sd_wpbits(SDState *, uint64_t): Assertion `wpnum < sd->wpgrps_size' failed. ==11578== ERROR: libFuzzer: deadly signal #8 0x7ffff628e091 in __assert_fail #9 0x5555588f1a3c in sd_wpbits hw/sd/sd.c:824:9 #10 0x5555588dd271 in sd_normal_command hw/sd/sd.c:1383:38 #11 0x5555588d777c in sd_do_command hw/sd/sd.c #12 0x555558cb25a0 in sdbus_do_command hw/sd/core.c:100:16 #13 0x555558e02a9a in sdhci_send_command hw/sd/sdhci.c:337:12 #14 0x555558dffa46 in sdhci_write hw/sd/sdhci.c:1187:9 #15 0x5555598b9d76 in memory_region_write_accessor softmmu/memory.c:489:5 Similarly to commit 8573378e62d ("hw/sd: fix out-of-bounds check for multi block reads"), check the address range before sending the status of the write protection bits. Include the qtest reproducer provided by Alexander Bulekov: $ make check-qtest-i386 ... Running test qtest-i386/fuzz-sdcard-test qemu-system-i386: ../hw/sd/sd.c:824: sd_wpbits: Assertion `wpnum < sd->wpgrps_size' failed. Reported-by: OSS-Fuzz (Issue 29225) Resolves: https://gitlab.com/qemu-project/qemu/-/issues/450 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20210702155900.148665-4-f4bug@amsat.org>
2021-07-12hw/sd/sdcard: Extract address_in_range() helper, log invalid accessesPhilippe Mathieu-Daudé1-12/+21
Multiple commands have to check the address requested is valid. Extract this code pattern as a new address_in_range() helper, and log invalid accesses as guest errors. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20210624142209.1193073-3-f4bug@amsat.org>
2021-07-12hw/sd/sdcard: When card is in wrong state, log which state it isPhilippe Mathieu-Daudé1-1/+2
We report the card is in an inconsistent state, but don't precise in which state it is. Add this information, as it is useful when debugging problems. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20210624142209.1193073-2-f4bug@amsat.org> Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella1-1/+1
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-12Drop the deprecated lm32 targetMarkus Armbruster3-340/+0
Target lm32 was deprecated in commit d8498005122, v5.2.0. See there for rationale. Some of its code lives on in device models derived from milkymist ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c. Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-2-armbru@redhat.com> Acked-by: Michael Walle <michael@walle.cc> [Trivial conflicts resolved, reST markup fixed]
2021-05-10hw/sd/omap_mmc: Use device_cold_reset() instead of device_legacy_reset()Peter Maydell1-1/+1
The omap_mmc_reset() function resets its SD card via device_legacy_reset(). We know that the SD card does not have a qbus of its own, so the new device_cold_reset() function (which resets both the device and its child buses) is equivalent here to device_legacy_reset() and we can just switch to the new API. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210430222348.8514-1-peter.maydell@linaro.org
2021-05-02hw: Do not include qemu/log.h if it is not necessaryThomas Huth1-1/+0
Many files include qemu/log.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210328054833.2351597-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Do not include hw/irq.h if it is not necessaryThomas Huth1-1/+0
Many files include hw/irq.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210327050236.2232347-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-22hw/sd: sdhci: Reset the data pointer of s->fifo_buffer[] when a different ↵Bin Meng1-0/+12
block size is programmed If the block size is programmed to a different value from the previous one, reset the data pointer of s->fifo_buffer[] so that s->fifo_buffer[] can be filled in using the new block size in the next transfer. With this fix, the following reproducer: outl 0xcf8 0x80001010 outl 0xcfc 0xe0000000 outl 0xcf8 0x80001001 outl 0xcfc 0x06000000 write 0xe000002c 0x1 0x05 write 0xe0000005 0x1 0x02 write 0xe0000007 0x1 0x01 write 0xe0000028 0x1 0x10 write 0x0 0x1 0x23 write 0x2 0x1 0x08 write 0xe000000c 0x1 0x01 write 0xe000000e 0x1 0x20 write 0xe000000f 0x1 0x00 write 0xe000000c 0x1 0x32 write 0xe0000004 0x2 0x0200 write 0xe0000028 0x1 0x00 write 0xe0000003 0x1 0x40 cannot be reproduced with the following QEMU command line: $ qemu-system-x86_64 -nographic -machine accel=qtest -m 512M \ -nodefaults -device sdhci-pci,sd-spec-version=3 \ -drive if=sd,index=0,file=null-co://,format=raw,id=mydrive \ -device sd-card,drive=mydrive -qtest stdio Cc: qemu-stable@nongnu.org Fixes: CVE-2020-17380 Fixes: CVE-2020-25085 Fixes: CVE-2021-3409 Fixes: d7dfca0807a0 ("hw/sdhci: introduce standard SD host controller") Reported-by: Alexander Bulekov <alxndr@bu.edu> Reported-by: Cornelius Aschermann (Ruhr-Universität Bochum) Reported-by: Sergej Schumilo (Ruhr-Universität Bochum) Reported-by: Simon Wörner (Ruhr-Universität Bochum) Buglink: https://bugs.launchpad.net/qemu/+bug/1892960 Buglink: https://bugs.launchpad.net/qemu/+bug/1909418 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1928146 Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20210303122639.20004-6-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-03-22hw/sd: sdhci: Limit block size only when SDHC_BLKSIZE register is writableBin Meng1-7/+7
The codes to limit the maximum block size is only necessary when SDHC_BLKSIZE register is writable. Tested-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20210303122639.20004-5-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-03-22hw/sd: sdhci: Correctly set the controller status for ADMABin Meng1-0/+3
When an ADMA transfer is started, the codes forget to set the controller status to indicate a transfer is in progress. With this fix, the following 2 reproducers: https://paste.debian.net/plain/1185136 https://paste.debian.net/plain/1185141 cannot be reproduced with the following QEMU command line: $ qemu-system-x86_64 -nographic -machine accel=qtest -m 512M \ -nodefaults -device sdhci-pci,sd-spec-version=3 \ -drive if=sd,index=0,file=null-co://,format=raw,id=mydrive \ -device sd-card,drive=mydrive -qtest stdio Cc: qemu-stable@nongnu.org Fixes: CVE-2020-17380 Fixes: CVE-2020-25085 Fixes: CVE-2021-3409 Fixes: d7dfca0807a0 ("hw/sdhci: introduce standard SD host controller") Reported-by: Alexander Bulekov <alxndr@bu.edu> Reported-by: Cornelius Aschermann (Ruhr-Universität Bochum) Reported-by: Sergej Schumilo (Ruhr-Universität Bochum) Reported-by: Simon Wörner (Ruhr-Universität Bochum) Buglink: https://bugs.launchpad.net/qemu/+bug/1892960 Buglink: https://bugs.launchpad.net/qemu/+bug/1909418 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1928146 Tested-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20210303122639.20004-4-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-03-22hw/sd: sdhci: Don't write to SDHC_SYSAD register when transfer is in progressBin Meng1-9/+11
Per "SD Host Controller Standard Specification Version 7.00" chapter 2.2.1 SDMA System Address Register: This register can be accessed only if no transaction is executing (i.e., after a transaction has stopped). With this fix, the following reproducer: outl 0xcf8 0x80001010 outl 0xcfc 0xfbefff00 outl 0xcf8 0x80001001 outl 0xcfc 0x06000000 write 0xfbefff2c 0x1 0x05 write 0xfbefff0f 0x1 0x37 write 0xfbefff0a 0x1 0x01 write 0xfbefff0f 0x1 0x29 write 0xfbefff0f 0x1 0x02 write 0xfbefff0f 0x1 0x03 write 0xfbefff04 0x1 0x01 write 0xfbefff05 0x1 0x01 write 0xfbefff07 0x1 0x02 write 0xfbefff0c 0x1 0x33 write 0xfbefff0e 0x1 0x20 write 0xfbefff0f 0x1 0x00 write 0xfbefff2a 0x1 0x01 write 0xfbefff0c 0x1 0x00 write 0xfbefff03 0x1 0x00 write 0xfbefff05 0x1 0x00 write 0xfbefff2a 0x1 0x02 write 0xfbefff0c 0x1 0x32 write 0xfbefff01 0x1 0x01 write 0xfbefff02 0x1 0x01 write 0xfbefff03 0x1 0x01 cannot be reproduced with the following QEMU command line: $ qemu-system-x86_64 -nographic -machine accel=qtest -m 512M \ -nodefaults -device sdhci-pci,sd-spec-version=3 \ -drive if=sd,index=0,file=null-co://,format=raw,id=mydrive \ -device sd-card,drive=mydrive -qtest stdio Cc: qemu-stable@nongnu.org Fixes: CVE-2020-17380 Fixes: CVE-2020-25085 Fixes: CVE-2021-3409 Fixes: d7dfca0807a0 ("hw/sdhci: introduce standard SD host controller") Reported-by: Alexander Bulekov <alxndr@bu.edu> Reported-by: Cornelius Aschermann (Ruhr-Universität Bochum) Reported-by: Sergej Schumilo (Ruhr-Universität Bochum) Reported-by: Simon Wörner (Ruhr-Universität Bochum) Buglink: https://bugs.launchpad.net/qemu/+bug/1892960 Buglink: https://bugs.launchpad.net/qemu/+bug/1909418 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1928146 Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20210303122639.20004-3-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-03-22hw/sd: sdhci: Don't transfer any data when command time outBin Meng1-1/+3
At the end of sdhci_send_command(), it starts a data transfer if the command register indicates data is associated. But the data transfer should only be initiated when the command execution has succeeded. With this fix, the following reproducer: outl 0xcf8 0x80001810 outl 0xcfc 0xe1068000 outl 0xcf8 0x80001804 outw 0xcfc 0x7 write 0xe106802c 0x1 0x0f write 0xe1068004 0xc 0x2801d10101fffffbff28a384 write 0xe106800c 0x1f 0x9dacbbcad9e8f7061524334251606f7e8d9cabbac9d8e7f60514233241505f write 0xe1068003 0x28 0x80d000251480d000252280d000253080d000253e80d000254c80d000255a80d000256880d0002576 write 0xe1068003 0x1 0xfe cannot be reproduced with the following QEMU command line: $ qemu-system-x86_64 -nographic -M pc-q35-5.0 \ -device sdhci-pci,sd-spec-version=3 \ -drive if=sd,index=0,file=null-co://,format=raw,id=mydrive \ -device sd-card,drive=mydrive \ -monitor none -serial none -qtest stdio Cc: qemu-stable@nongnu.org Fixes: CVE-2020-17380 Fixes: CVE-2020-25085 Fixes: CVE-2021-3409 Fixes: d7dfca0807a0 ("hw/sdhci: introduce standard SD host controller") Reported-by: Alexander Bulekov <alxndr@bu.edu> Reported-by: Cornelius Aschermann (Ruhr-Universität Bochum) Reported-by: Sergej Schumilo (Ruhr-Universität Bochum) Reported-by: Simon Wörner (Ruhr-Universität Bochum) Buglink: https://bugs.launchpad.net/qemu/+bug/1892960 Buglink: https://bugs.launchpad.net/qemu/+bug/1909418 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1928146 Acked-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alexander Bulekov <alxndr@bu.edu> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20210303122639.20004-2-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-03-22hw/sd: sd: Actually perform the erase operationBin Meng1-9/+13
At present the sd_erase() does not erase the requested range of card data to 0xFFs. Let's make the erase operation actually happen. Signed-off-by: Bin Meng <bin.meng@windriver.com> Message-Id: <1613811493-58815-1-git-send-email-bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-03-22hw/sd: sd: Fix build error when DEBUG_SD is onBin Meng1-0/+1
"qemu-common.h" should be included to provide the forward declaration of qemu_hexdump() when DEBUG_SD is on. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210228050609.24779-1-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-21Merge remote-tracking branch ↵Peter Maydell1-1/+1
'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging Pull request trivial patches 20210220 # gpg: Signature made Sat 20 Feb 2021 12:34:21 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.0-pull-request: MAINTAINERS: Fix default-configs/ entries target/avr/cpu: Use device_class_set_parent_realize() hw/scsi/megasas: Remove pointless parenthesis u2f-passthru: put it into the 'misc' category tpm: put some tpm devices into the correct category nvdimm: put it into the 'storage' category vmmouse: put it into the 'input' category virtio-pmem: put it into the 'storage' category MAINTAINERS: add my github tree URL Fix SPDX-License-Identifier typos hw/block/fdc: Remove the check_media_rate property hw/i386/xen: Remove dead code Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-02-20Fix SPDX-License-Identifier typosRyan Finnie1-1/+1
Several SPDX headers contain "SPDX-License-Identifer" (note the missing "i" before "er"); fix these typos. Signed-off-by: Ryan Finnie <ryan@finnie.org> Cc: qemu-trivial@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210201200147.211914-1-ryan@finnie.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-20hw/sd: sdhci: Simplify updating s->prnsts in sdhci_sdma_transfer_multi_blocks()Bin Meng1-4/+3
s->prnsts is updated in both branches of the if () else () statement. Move the common bits outside so that it is cleaner. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1613447214-81951-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: sd: Bypass the RCA check for CMD13 in SPI modeBin Meng1-1/+2
Unlike SD mode, when SD card is working in SPI mode, the argument of CMD13 is stuff bits. Hence we should bypass the RCA check. See "Physical Layer Specification Version 8.00", chapter 7.3.1.3 Detailed Command Description (SPI mode): "The card shall ignore stuff bits and reserved bits in an argument" and Table 7-3 Commands and Arguments (SPI mode): "CMD13 Argument [31:0] stuff bits" Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210216150225.27996-9-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: sd: Skip write protect groups check in CMD24/25 for high capacity cardsBin Meng1-5/+9
High capacity cards don't support write protection hence we should not perform the write protect groups check in CMD24/25 for them. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210216150225.27996-8-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: sd: Skip write protect groups check in sd_erase() for high capacity cardsBin Meng1-6/+12
High capacity cards don't support write protection hence we should not perform the write protect groups check in sd_erase() for them. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210216150225.27996-6-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: sd: Move the sd_block_{read, write} and macros aheadBin Meng1-21/+21
These APIs and macros may be referenced by functions that are currently before them. Move them ahead a little bit. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210216150225.27996-5-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: sd: Fix CMD30 response typeBin Meng1-1/+1
Per the "Physical Layer Specification Version 8.00", table 4-26 (SD mode) and table 7-3 (SPI mode) command descriptions, CMD30 response type is R1, not R1b. Fixes: a1bb27b1e98a ("SD card emulation initial implementation") Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210216150225.27996-4-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: sd: Only SDSC cards support CMD28/29/30Bin Meng1-0/+12
Per the "Physical Layer Specification Version 8.00", table 4-26 (SD mode) and table 7-3 (SPI mode) command descriptions, the following commands: - CMD28 (SET_WRITE_PROT) - CMD29 (CLR_WRITE_PROT) - CMD30 (SEND_WRITE_PROT) are only supported by SDSC cards. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210216150225.27996-3-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: sd: Fix address check in sd_erase()Bin Meng1-1/+1
For high capacity memory cards, the erase start address and end address are multiplied by 512, but the address check is still based on the original block number in sd->erase_{start, end}. Fixes: 1bd6fd8ed593 ("hw/sd/sdcard: Do not attempt to erase out of range addresses") Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210216150225.27996-2-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: ssi-sd: Handle the rest commands with R1b response typeBin Meng1-0/+6
Besides CMD12, the following command's reponse type is R1b: - SET_WRITE_PROT (CMD28) - CLR_WRITE_PROT (CMD29) - ERASE (CMD38) Reuse the same s->stopping to indicate a R1b reponse is needed. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210128063035.15674-10-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: ssi-sd: Fix STOP_TRANSMISSION (CMD12) responseBin Meng1-4/+5
CMD12's response type is R1b, which is basically a R1 plus optional addition of the busy signal token that can be any number of bytes. A zero value indicates card is busy and a non-zero value indicates the card is ready for the next command. Current implementation sends the busy signal token without sending the R1 first. This does not break the U-Boot/Linux mmc_spi driver, but it does not make the VxWorks driver happy. Move the testing logic of s->stopping in the SSI_SD_RESPONSE state a bit later, after the first byte of the card reponse is sent out, to conform with the spec. After the busy signal token is sent, the state should be transferred to SSI_SD_CMD. Fixes: 775616c3ae8c ("Partial SD card SPI mode support") Signed-off-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20210128063035.15674-9-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: ssi-sd: Fix SEND_IF_COND (CMD8) responseBin Meng1-3/+3
The SEND_IF_COND command (CMD8) response is of format R7, but current code returns R1 for CMD8. Fix it. Fixes: 775616c3ae8c ("Partial SD card SPI mode support") Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210128063035.15674-8-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: ssi-sd: Support multiple block writeBin Meng1-2/+31
For a multiple block write operation, each block begins with a multi write start token. Unlike the SD mode that the multiple block write ends when receiving a STOP_TRAN command (CMD12), a special stop tran token is used to signal the card. Emulating this by manually sending a CMD12 to the SD card core, to bring it out of the receiving data state. Signed-off-by: Bin Meng <bin.meng@windriver.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210128063035.15674-7-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: ssi-sd: Support single block writeBin Meng1-4/+40
Add 2 more states for the block write operation. The SPI host needs to send a data start token to start the transfer, and the data block written to the card will be acknowledged by a data response token. Signed-off-by: Bin Meng <bin.meng@windriver.com> [PMD: Change VMState version id 6 -> 7] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210128063035.15674-6-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: Introduce receive_ready() callbackBin Meng2-0/+19
At present there is a data_ready() callback for the SD data read path. Let's add a receive_ready() for the SD data write path. Signed-off-by: Bin Meng <bin.meng@windriver.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210128063035.15674-5-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: sd: Allow single/multiple block write for SPI modeBin Meng1-3/+0
At present the single/multiple block write in SPI mode is blocked by sd_normal_command(). Remove the limitation. Signed-off-by: Bin Meng <bin.meng@windriver.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210128063035.15674-4-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: sd: Remove duplicated codes in single/multiple block read/writeBin Meng1-47/+0
The single block read (CMD17) codes are the same as the multiple block read (CMD18). Merge them into one. The same applies to single block write (CMD24) and multiple block write (CMD25). Signed-off-by: Bin Meng <bin.meng@windriver.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210128063035.15674-3-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: ssi-sd: Support multiple block readBin Meng1-9/+33
In the case of a multiple block read operation every transferred block has its suffix of CRC16. Update the state machine logic to handle multiple block read. Signed-off-by: Bin Meng <bin.meng@windriver.com> [PMD: Change VMState version id 5 -> 6] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210128063035.15674-2-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
generated by cgit v1.1 at 2024-12-29 02:22:30 +0000