aboutsummaryrefslogtreecommitdiff
path: root/hw/sd/ssi-sd.c
AgeCommit message (Collapse)AuthorFilesLines
2021-02-20hw/sd: ssi-sd: Handle the rest commands with R1b response typeBin Meng1-0/+6
Besides CMD12, the following command's reponse type is R1b: - SET_WRITE_PROT (CMD28) - CLR_WRITE_PROT (CMD29) - ERASE (CMD38) Reuse the same s->stopping to indicate a R1b reponse is needed. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210128063035.15674-10-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: ssi-sd: Fix STOP_TRANSMISSION (CMD12) responseBin Meng1-4/+5
CMD12's response type is R1b, which is basically a R1 plus optional addition of the busy signal token that can be any number of bytes. A zero value indicates card is busy and a non-zero value indicates the card is ready for the next command. Current implementation sends the busy signal token without sending the R1 first. This does not break the U-Boot/Linux mmc_spi driver, but it does not make the VxWorks driver happy. Move the testing logic of s->stopping in the SSI_SD_RESPONSE state a bit later, after the first byte of the card reponse is sent out, to conform with the spec. After the busy signal token is sent, the state should be transferred to SSI_SD_CMD. Fixes: 775616c3ae8c ("Partial SD card SPI mode support") Signed-off-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20210128063035.15674-9-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: ssi-sd: Fix SEND_IF_COND (CMD8) responseBin Meng1-3/+3
The SEND_IF_COND command (CMD8) response is of format R7, but current code returns R1 for CMD8. Fix it. Fixes: 775616c3ae8c ("Partial SD card SPI mode support") Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210128063035.15674-8-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: ssi-sd: Support multiple block writeBin Meng1-2/+31
For a multiple block write operation, each block begins with a multi write start token. Unlike the SD mode that the multiple block write ends when receiving a STOP_TRAN command (CMD12), a special stop tran token is used to signal the card. Emulating this by manually sending a CMD12 to the SD card core, to bring it out of the receiving data state. Signed-off-by: Bin Meng <bin.meng@windriver.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210128063035.15674-7-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: ssi-sd: Support single block writeBin Meng1-4/+40
Add 2 more states for the block write operation. The SPI host needs to send a data start token to start the transfer, and the data block written to the card will be acknowledged by a data response token. Signed-off-by: Bin Meng <bin.meng@windriver.com> [PMD: Change VMState version id 6 -> 7] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210128063035.15674-6-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-02-20hw/sd: ssi-sd: Support multiple block readBin Meng1-9/+33
In the case of a multiple block read operation every transferred block has its suffix of CRC16. Update the state machine logic to handle multiple block read. Signed-off-by: Bin Meng <bin.meng@windriver.com> [PMD: Change VMState version id 5 -> 6] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210128063035.15674-2-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-01-24hw/sd: ssi-sd: Use macros for the dummy value and tokens in the transferBin Meng1-10/+16
At present the codes use hardcoded numbers (0xff/0xfe) for the dummy value and block start token. Replace them with macros. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210123104016.17485-12-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-01-24hw/sd: ssi-sd: Fix the wrong command index for STOP_TRANSMISSIONBin Meng1-1/+1
This fixes the wrong command index for STOP_TRANSMISSION, the required command to interrupt the multiple block read command, in the old codes. It should be CMD12 (0x4c), not CMD13 (0x4d). Fixes: 775616c3ae8c ("Partial SD card SPI mode support") Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210123104016.17485-10-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-01-24hw/sd: ssi-sd: Add a state representing NacBin Meng1-2/+7
Per the "Physical Layer Specification Version 8.00" chapter 7.5.2, "Data Read", there is a minimum 8 clock cycles (Nac) after the card response and before data block shows up on the data out line. This applies to both single and multiple block read operations. Current implementation of single block read already satisfies the timing requirement as in the RESPONSE state after all responses are transferred the state remains unchanged. In the next 8 clock cycles it jumps to DATA_START state if data is ready. However we need an explicit state when expanding our support to multiple block read in the future. Let's add a new state PREP_DATA explicitly in the ssi-sd state machine to represent Nac. Note we don't change the single block read state machine to let it jump from RESPONSE state to DATA_START state as that effectively generates a 16 clock cycles Nac, which might not be safe. As the spec says the maximum Nac shall be calculated from several fields encoded in the CSD register, we don't want to bother updating CSD to ensure our Nac is within range to complicate things. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210123104016.17485-9-bmeng.cn@gmail.com> [PMD: Change VMState version id 4 -> 5] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-01-24hw/sd: ssi-sd: Suffix a data block with CRC16Bin Meng1-3/+20
Per the SD spec, a valid data block is suffixed with a 16-bit CRC generated by the standard CCITT polynomial x16+x12+x5+1. This part is currently missing in the ssi-sd state machine. Without it, all data block transfer fails in guest software because the expected CRC16 is missing on the data out line. Fixes: 775616c3ae8c ("Partial SD card SPI mode support") Signed-off-by: Bin Meng <bin.meng@windriver.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210123104016.17485-8-bmeng.cn@gmail.com> [PMD: Change VMState version id 3 -> 4, check s->mode validity in post_load()] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-01-24hw/sd: ssi-sd: Fix incorrect card response sequenceBin Meng1-3/+8
Per the "Physical Layer Specification Version 8.00" chapter 7.5.1, "Command/Response", there is a minimum 8 clock cycles (Ncr) before the card response shows up on the data out line. However current implementation jumps directly to the sending response state after all 6 bytes command is received, which is a spec violation. Add a new state PREP_RESP in the ssi-sd state machine to handle it. Fixes: 775616c3ae8c ("Partial SD card SPI mode support") Signed-off-by: Bin Meng <bin.meng@windriver.com> Tested-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210123104016.17485-4-bmeng.cn@gmail.com> [PMD: Change VMState version id 2 -> 3] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-12-10hw/ssi: Rename SSI 'slave' as 'peripheral'Philippe Mathieu-Daudé1-6/+6
In order to use inclusive terminology, rename SSI 'slave' as 'peripheral', following the specification resolution: https://www.oshwa.org/a-resolution-to-redefine-spi-signal-names/ Patch created mechanically using: $ sed -i s/SSISlave/SSIPeripheral/ $(git grep -l SSISlave) $ sed -i s/SSI_SLAVE/SSI_PERIPHERAL/ $(git grep -l SSI_SLAVE) $ sed -i s/ssi-slave/ssi-peripheral/ $(git grep -l ssi-slave) $ sed -i s/ssi_slave/ssi_peripheral/ $(git grep -l ssi_slave) $ sed -i s/ssi_create_slave/ssi_create_peripheral/ \ $(git grep -l ssi_create_slave) Then in VMStateDescription vmstate_ssi_peripheral we restored the "SSISlave" migration stream name (to avoid breaking migration). Finally the following files have been manually tweaked: - hw/ssi/pl022.c - hw/ssi/xilinx_spips.c Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201012124955.3409127-4-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost1-3/+1
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost1-1/+2
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost1-2/+4
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-21hw/sd: Rename sdbus_read_data() as sdbus_read_byte()Philippe Mathieu-Daudé1-1/+1
The sdbus_read_data() method do a single byte access on the data line of a SD bus. Rename it as sdbus_read_byte() and document it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200814092346.21825-4-f4bug@amsat.org>
2020-07-10sd: Use ERRP_GUARD()Vladimir Sementsov-Ogievskiy1-5/+5
If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^SD (Secure Card)$/,/^$/{s/^F: //p}' \ MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-4-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-10qdev: Use returned bool to check for failure, Coccinelle partMarkus Armbruster1-3/+2
The previous commit enables conversion of qdev_prop_set_drive_err(..., &err); if (err) { ... } to if (!qdev_prop_set_drive_err(..., errp)) { ... } Coccinelle script: @@ identifier fun = qdev_prop_set_drive_err; expression list args; typedef Error; Error *err; @@ - fun(args, &err); - if (err) + if (!fun(args, &err)) { ... } One line break tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-33-armbru@redhat.com>
2020-07-10qom: Use returned bool to check for failure, Coccinelle partMarkus Armbruster1-2/+1
The previous commit enables conversion of foo(..., &err); if (err) { ... } to if (!foo(..., errp)) { ... } for QOM functions that now return true / false on success / error. Coccinelle script: @@ identifier fun = { object_apply_global_props, object_initialize_child_with_props, object_initialize_child_with_propsv, object_property_get, object_property_get_bool, object_property_parse, object_property_set, object_property_set_bool, object_property_set_int, object_property_set_link, object_property_set_qobject, object_property_set_str, object_property_set_uint, object_set_props, object_set_propv, user_creatable_add_dict, user_creatable_complete, user_creatable_del }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-29-armbru@redhat.com>
2020-07-10qom: Put name parameter before value / visitor parameterMarkus Armbruster1-1/+1
The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-10qdev: Use returned bool to check for qdev_realize() etc. failureMarkus Armbruster1-2/+1
Convert foo(..., &err); if (err) { ... } to if (!foo(..., &err)) { ... } for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their wrappers isa_realize_and_unref(), pci_realize_and_unref(), sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref(). Coccinelle script: @@ identifier fun = { isa_realize_and_unref, pci_realize_and_unref, qbus_realize, qdev_realize, qdev_realize_and_unref, sysbus_realize, sysbus_realize_and_unref, usb_realize_and_unref }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Nothing to convert there; skipped. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200707160613.848843-5-armbru@redhat.com>
2020-07-03Replace uses of FROM_SSI_SLAVE() macro with QOM castsPeter Maydell1-2/+2
The FROM_SSI_SLAVE() macro predates QOM and is used as a typesafe way to cast from an SSISlave* to the instance struct of a subtype of TYPE_SSI_SLAVE. Switch to using the QOM cast macros instead, which have the same effect (by writing the QOM macros if the types were previously missing them.) (The FROM_SSI_SLAVE() macro allows the SSISlave member of the subtype's struct to be anywhere as long as it is named "ssidev", whereas a QOM cast macro insists that it is the first thing in the subtype's struct. This is true for all the types we convert here.) This removes all the uses of FROM_SSI_SLAVE() so we can delete the definition. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-18-peter.maydell@linaro.org
2020-06-23qdev: Make qdev_prop_set_drive() match the other helpersMarkus Armbruster1-1/+2
qdev_prop_set_drive() can fail. None of the other qdev_prop_set_FOO() can; they abort on error. To clean up this inconsistency, rename qdev_prop_set_drive() to qdev_prop_set_drive_err(), and create a qdev_prop_set_drive() that aborts on error. Coccinelle script to update callers: @ depends on !(file in "hw/core/qdev-properties-system.c")@ expression dev, name, value; symbol error_abort; @@ - qdev_prop_set_drive(dev, name, value, &error_abort); + qdev_prop_set_drive(dev, name, value); @@ expression dev, name, value, errp; @@ - qdev_prop_set_drive(dev, name, value, errp); + qdev_prop_set_drive_err(dev, name, value, errp); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200622094227.1271650-14-armbru@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster1-2/+2
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-03-17hw/sd/ssi-sd: fix error handling in ssi_sd_realizeVladimir Sementsov-Ogievskiy1-2/+14
It's wrong to use same err object as errp parameter for several function calls without intermediate checking for error: we'll crash if try to set err object twice. Fix that. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200317125741.15301-1-vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-06-06hw/sd: Use the QOM BUS() macro to access BusState.qbusPhilippe Mathieu-Daudé1-1/+1
Rather than looking inside the definition of a BusState with "s->bus.qbus", use the QOM prefered style: "BUS(&s->bus)". This patch was generated using the following Coccinelle script: // Use BUS() macros to access BusState.qbus @use_bus_macro_to_access_qbus@ expression obj; identifier bus; @@ -&obj->bus.qbus +BUS(&obj->bus) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20190528164020.32250-6-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-24ssi-sd: Make devices picking up backends unavailable with -deviceMarkus Armbruster1-0/+2
Device models aren't supposed to go on fishing expeditions for backends. They should expose suitable properties for the user to set. For onboard devices, board code sets them. Device ssi-sd picks up its block backend in its init() method with drive_get_next() instead. This mistake is already marked FIXME since commit af9e40a. Unset user_creatable to remove the mistake from our external interface. Since the SSI bus doesn't support hotplug, only -device can be affected. Only certain ARM machines have ssi-sd and provide an SSI bus for it; this patch breaks -device ssi-sd for these machines. No actual use of -device ssi-sd is known. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Thomas Huth <thuth@redhat.com> Message-id: 20181009060835.4608-1-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29sdcard: Use the ldst APIPhilippe Mathieu-Daudé1-4/+2
The load/store API will ease further code movement. Per the Physical Layer Simplified Spec. "3.6 Bus Protocol": "In the CMD line the Most Significant Bit (MSB) is transmitted first, the Least Significant Bit (LSB) is the last." Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01hw: Do not include "sysemu/block-backend.h" if it is not necessaryPhilippe Mathieu-Daudé1-1/+0
Remove those unneeded includes to speed up the compilation process a little bit. (Continue 7eceff5b5a1fa cleanup) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-13-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-22hw/sd/ssi-sd: use the SDBus API, connect the SDCard to the busPhilippe Mathieu-Daudé1-13/+19
On reset the bus will reset the card, we can now drop the device_reset() call. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180216022933.10945-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16hw/sd/ssi-sd: Reset SD card on controller resetPeter Maydell1-2/+23
Since ssi-sd is still using the legacy SD card API, the SD card created by sd_init() is not plugged into any bus. This means that the controller has to reset it manually. Failing to do this mostly didn't affect the guest since the guest typically does a programmed SD card reset as part of its SD controller driver initialization, but meant that migration failed because it's only in sd_reset() that we set up the wpgrps_size field. In the case of sd-ssi, we have to implement an entire reset function since there wasn't one previously, and that requires a QOM cast macro that got omitted when this device was QOMified. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1515506513-31961-4-git-send-email-peter.maydell@linaro.org
2016-09-22vmstateify ssi-sdDr. David Alan Gilbert1-42/+28
Changed a few types to fixed sized types in the ssi_sd_state Now saving/loading a byte for the cmdarg/response bytes that were previously saved as uint32 Bumped version number to deal with those changes. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1472035246-12483-4-git-send-email-dgilbert@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-04ssi: change ssi_slave_init to be a realize opsCédric Le Goater1-4/+5
This enables qemu to handle late inits and report errors. All the SSI slave routine names were changed accordingly. Code was modified to handle errors when possible (m25p80 and ssi-sd) Tested with the m25p80 slave object. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1467138270-32481-2-git-send-email-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-29hw: Clean up includesPeter Maydell1-0/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
2016-01-21ssi: Move ssi.h into a separate directoryAlistair Francis1-1/+1
Move the ssi.h include file into the ssi directory. While touching the code also fix the typdef lines as checkpatch complains. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-29sd.h: Move sd.h to include/hw/sd/Sai Pavan Boddu1-1/+1
Create a sd directory under include/hw/ and move sd.h to include/hw/sd/ Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-04-02hw: Mark devices picking up block backends actively FIXMEMarkus Armbruster1-0/+1
Drives defined with if!=none are for board initialization to wire up. Board code calls drive_get() or similar to find them, and creates devices with their qdev drive properties set accordingly. Except a few devices go on a fishing expedition for a suitable backend instead of exposing a drive property for board code to set: they call driver_get() or drive_get_next() in their realize() or init() method to implicitly connect to the "next" backend with a certain interface type. Picking up backends that way works when the devices are created by board code. But it's inappropriate for -device or device_add. Not only is this inconsistent with how the other block device models work (they connect to a backend explicitly identified by a "drive" property), it breaks when the "next" backend has been picked up by the board already. Example: $ qemu-system-arm -S -M connex -pflash flash.img -device ssi-sd Aborted (core dumped) Mark them with suitable FIXME comments. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Cc: "Andreas Färber" <andreas.faerber@web.de> Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2014-10-20hw: Convert from BlockDriverState to BlockBackend, mostlyMarkus Armbruster1-1/+1
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo()Markus Armbruster1-1/+2
The patch is big, but all it really does is replacing dinfo->bdrv by blk_bs(blk_by_legacy_dinfo(dinfo)) The replacement is repetitive, but the conversion of device models to BlockBackend is imminent, and will shorten it to just blk_legacy_dinfo(dinfo). Line wrapping muddies the waters a bit. I also omit tests whether dinfo->bdrv is null, because it never is. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-05ssi-sd: fix buffer overrun on invalid state loadMichael S. Tsirkin1-0/+9
CVE-2013-4537 s->arglen is taken from wire and used as idx in ssi_sd_transfer(). Validate it before access. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-03-12ssi: Convert legacy SSI_SLAVE -> DEVICE castsPeter Crosthwaite1-3/+4
Convert legacy ->qdev style casts from TYPE_SSI_SLAVE to TYPE_DEVICE. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> [AF: Introduce local DeviceState variable for transition to QOM realize] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-10-11blockdev: Remove IF_* check for read-only blockdev_initKevin Wolf1-0/+3
IF_NONE allows read-only, which makes forbidding it in this place for other types pretty much pointless. Instead, make sure that all devices for which the check would have errored out check in their init function that they don't get a read-only BlockDriverState. This catches even cases where IF_NONE and -device is used. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2013-06-21sd: pass bool parameter for sd_initliguang1-1/+1
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini1-0/+274
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-11-03 11:06:35 +0000