aboutsummaryrefslogtreecommitdiff
path: root/hw/scsi/megasas.c
AgeCommit message (Collapse)AuthorFilesLines
2015-10-12megasas: fix megasas_get_sata_addrPaolo Bonzini1-1/+1
There are two bugs here. First, the 16-bit id loses the high 8 bits when shifted left by 24. Second, the address must be combined with an "or" or we just get zero. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-27megasas: Add write function to handle write access to PCI BAR 3Salva Peiró1-0/+7
This patch fixes a QEMU SEGFAULT when a write operation is performed on the memory region of the PCI BAR 3 (base address space). When a writeb(0xe0000000) is performed the .write function is invoked to handle the write access, however, since the .write is not initialised, the call to 0, causes QEMU to SEGFAULT. Signed-off-by: Salva Peiró <speirofr@gmail.com> Acked-by: Hannes Reinecke <hare@suse.com> Message-Id: <1437987112-24744-1-git-send-email-speirofr@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19pci: Don't register a specialized 'config_write' if default behavior is intendedShmulik Ladkani1-8/+0
Few devices have their specialized 'config_write' methods which simply call 'pci_default_write_config' followed by a 'msix_write_config' or 'msi_write_config' calls, using exact same arguments. This is unnecessary as 'pci_default_write_config' already invokes 'msi_write_config' and 'msix_write_config'. Also, since 'pci_default_write_config' is the default 'config_write' handler, we can simply avoid the registration of these specialized versions. Cc: Leonid Shatz <leonid.shatz@ravellosystems.com> Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-04-28Convert (ffs(val) - 1) to ctz32(val)Stefan Hajnoczi1-1/+1
This commit was generated mechanically by coccinelle from the following semantic patch: @@ expression val; @@ - (ffs(val) - 1) + ctz32(val) The call sites have been audited to ensure the ffs(0) - 1 == -1 case never occurs (due to input validation, asserts, etc). Therefore we don't need to worry about the fact that ctz32(0) == 32. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-25megasas: use PCI DMA APIsPaolo Bonzini1-27/+24
It is wrong to use address_space_memory directly, because there could be an IOMMU in the middle. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10scsi: Convert remaining PCI HBAs to realize()Markus Armbruster1-11/+3
These are "am53c974", "dc390", "lsi53c895a", "lsi53c810", "megasas", "megasas-gen2". Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-Id: <1425925048-15482-5-git-send-email-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10scsi: Clean up duplicated error in legacy if=scsi codeMarkus Armbruster1-0/+2
Commit a818a4b changed scsi_bus_legacy_handle_cmdline() to report errors from scsi_bus_legacy_add_drive() with error_report() in addition to returning them. That's inappropriate. Two kinds of callers: 1. realize methods (devices "esp", "virtio-scsi-device" and "spapr-vscsi") The error object gets passed up the call chain until it gets reported again and freed. Example: $ qemu-system-arm -M virt -S -display none \ > -drive if=scsi,id=foo,bus=1,file=tmp.qcow2 \ > -device nec-usb-xhci -device usb-storage,drive=foo \ > -device virtio-scsi-pci qemu-system-arm: -drive if=scsi,id=foo,bus=1,file=tmp.qcow2: Property 'scsi-disk.drive' can't take value 'foo', it's in use qemu-system-arm: -drive if=scsi,id=foo,bus=1,file=tmp.qcow2: Setting drive property failed qemu-system-arm: -device virtio-scsi-pci: Setting drive property failed qemu-system-arm: -device virtio-scsi-pci: Device initialization failed qemu-system-arm: -device virtio-scsi-pci: Device 'virtio-scsi-pci' could not be initialized The second message in this error cascade comes from scsi_bus_legacy_handle_cmdline(). The error object then gets passed up to the qdev_init() called from virtio_scsi_pci_init_pci(), which reports it again. 2. init methods (devices "am53c974", "dc390", "lsi53c895a", "lsi53c810", "megasas", "megasas-gen2") init methods need to report their errors with qerror_report(). These don't. The inappropriate error_report() papers over the bug. error_report() isn't the same as qerror_report() in QMP context, but this can't actually happen: QMP can still only hot-plug, and callers call scsi_bus_legacy_handle_cmdline() only on cold-plug. Except for sysbus_esp_realize(), but that can't be hot-plugged at all, as far as I can tell. Fix the init methods and drop the inappropriate error_report() in scsi_bus_legacy_handle_cmdline(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-Id: <1425925048-15482-2-git-send-email-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15scsi: Fuse g_malloc(); memset() into g_malloc0()Markus Armbruster1-4/+2
Coccinelle semantic patch: @@ expression LHS, SZ; @@ - LHS = g_malloc(SZ); - memset(LHS, 0, SZ); + LHS = g_malloc0(SZ); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31megasas: Fixup MSI-X handlingHannes Reinecke1-24/+24
MSI-X works slightly different than INTx; the doorbell registers are not necessarily used as MSI-X interrupts are directed anyway. So the head pointer on the reply queue needs to be updated as soon as a frame is completed, and we can set the doorbell only when in INTx mode. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31megasas: Rework frame queueing algorithmHannes Reinecke1-51/+45
Windows requires the frames to be unmapped, otherwise we run into a race condition where the updated frame data is not visible to the guest. With that we can simplify the queue algorithm and use a bitmap for tracking free frames. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31megasas: Update queue loggingHannes Reinecke1-9/+17
Improve queue logging by displaying head and tail pointer of the completion queue. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31megasas: Implement DCMD_CLUSTER_RESET_LDHannes Reinecke1-1/+15
Some implementations use DCMD_CLUSTER_RESET_LD to simulate a device reset. Signed-off-by: Hannes Reinecke <hare@suse.de> [Compare against id, not lun. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31megasas: Ignore duplicate init_firmware commandsHannes Reinecke1-3/+6
The windows driver is sending several init_firmware commands when in MSI-X mode. It is, however, using only the first queue. So disregard any additional init_firmware commands until the HBA is reset. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31megasas: Clear unit attention on initial resetHannes Reinecke1-1/+17
The EFI firmware doesn't handle unit attentions properly, so we need to clear the Power On/Reset unit attention upon initial reset. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31megasas: Decode register namesHannes Reinecke1-3/+20
To ease debugging we should be decoding the register names. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31megasas: Fix typo in megasas_dcmd_ld_get_list()Hannes Reinecke1-1/+1
The check for a valid command buffer size was inverted. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31megasas: add MegaRAID SAS 2108 emulationHannes Reinecke1-25/+193
The 2108 chip supports MSI and MSI-X, so update the emulation to support both chips. Signed-off-by: Hannes Reinecke <hare@suse.de> [Make VMStateDescription const. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31megasas: fixup device mappingHannes Reinecke1-35/+60
Logical drives can only be addressed with the 'target_id' number; LUN numbers cannot be selected. Physical drives can be selected with both, target and LUN id. So we should disallow LUN numbers not equal to 0 when in RAID mode. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31megasas: fixup MFI_DCMD_LD_LIST_QUERYHannes Reinecke1-3/+34
The MFI_DCMD_LD_LIST_QUERY function is using a different format than MFI_DCMD_LD_LIST, so we need to implement it differently. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-20hw: Convert from BlockDriverState to BlockBackend, mostlyMarkus Armbruster1-9/+6
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-18memory: remove memory_region_destroyPaolo Bonzini1-3/+0
The function is empty after the previous patch, so remove it. Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18megasas: use PCI DMA APIPaolo Bonzini1-6/+10
MegaSAS emulation is not IOMMU-friendly. Fix this by switching to pci_dma_* functions. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (x86)Juan Quintela1-2/+1
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-20megasas: remove buildtime stringsOlaf Hering1-2/+2
Using __DATE__ or __TIME__ in binary pkgs changes the checksum of compiled binaries if they get rebuilt, even if there are no other source changes. Replace the dynamic strings with some equally informative static strings. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-28megasas: Add MSI supportHannes Reinecke1-6/+43
Some hardware instances do support MSI, so we should do likewise. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-28megasas: Enable MSI-X supportHannes Reinecke1-12/+5
MSI-X support has been fixed in qemu, so we can enable it again. Signed-off-by: Hannes Reinecke <hare@suse.de> [Do not change VMSTATE_PCI_DEVICE to PCIE. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-28megasas: Implement LD_LIST_QUERYHannes Reinecke1-0/+17
Newer firmware implement a LD_LIST_QUERY command, and due to a driver issue no drives might be detected if this command isn't supported. So add emulation for this command, too. Cc: qemu-stable@nongnu.org Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-14qdev: Remove hex8/32/64 property typesPaolo Bonzini1-1/+1
Replace them with uint8/32/64. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-11exec: Make stb_phys input an AddressSpaceEdgar E. Iglesias1-2/+4
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make stl_*_phys input an AddressSpaceEdgar E. Iglesias1-2/+4
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make stq_*_phys input an AddressSpaceEdgar E. Iglesias1-1/+2
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make ldq/ldub_*_phys input an AddressSpaceEdgar E. Iglesias1-1/+2
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make ldl_*_phys input an AddressSpaceEdgar E. Iglesias1-2/+2
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2013-10-14hw: set interrupts using pci irq wrappersMarcel Apfelbaum1-3/+3
pci_set_irq and the other pci irq wrappers use PCI_INTERRUPT_PIN config register to compute device INTx pin to assert/deassert. An irq is allocated using pci_allocate_irq wrapper only if is needed by non pci devices. Removed irq related fields from state if not used anymore. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-30scsi: Pass size to scsi_bus_new()Andreas Färber1-1/+2
To be passed to qbus_create_inplace(). Use DEVICE() casts instead of direct parent field access. Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29devices: Associate devices to their logical categoryMarcel Apfelbaum1-0/+1
The category will be used to sort the devices displayed in the command line help. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-23scsi: Improve error propagation for scsi_bus_legacy_handle_cmdline()Andreas Färber1-1/+6
Let scsi_bus_legacy_add_drive() and scsi_bus_legacy_handle_cmdline() return an Error**. Prepare qdev initfns for QOM realize error model. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23megasas: Legacy command line handling fixAndreas Färber1-1/+4
Only apply legacy command line handling when the device has not been hot-plugged. Propagate failure of legacy command line handling. Cc: qemu-stable@nongnu.org Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23scsi/megasas: QOM parent field cleanupAndreas Färber1-20/+26
Replace direct uses of MegasasState::dev with QOM casts and rename it to parent_obj. Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23scsi/megasas: QOM Upcast SweepPeter Crosthwaite1-5/+10
Define and use standard QOM cast macro. Remove usages of DO_UPCAST() and direct -> style upcasting. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-04hw/s*: pass owner to memory_region_init* functionsPaolo Bonzini1-3/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini1-3/+3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-20dma: eliminate DMAContextPaolo Bonzini1-2/+2
The DMAContext is a simple pointer to an AddressSpace that is now always already available. Make everyone hold the address space directly, and clean up the DMA API to use the AddressSpace directly. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-24exec: eliminate qemu_put_ram_ptrPaolo Bonzini1-1/+0
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-03scsi: add bus_name parameter to scsi_bus_new.KONRAD Frederic1-1/+1
This adds the possibility to create a scsi-bus with a specified name. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1367330931-12994-4-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-08hw: move private headers to hw/ subdirectories.Paolo Bonzini1-1/+1
Many headers are used only in a single directory. These can be kept in hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini1-0/+2213
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-08-24 15:52:58 +0000