aboutsummaryrefslogtreecommitdiff
path: root/hw/s390x
AgeCommit message (Collapse)AuthorFilesLines
2022-01-05hw: Add compat machines for 7.0Cornelia Huck1-1/+13
Add 7.0 machine types for arm/i440fx/q35/s390x/spapr. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20211217143948.289995-1-cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-12-17s390x/pci: add supported DT information to clp responseMatthew Rosato3-0/+3
The DTSM is a mask that specifies which I/O Address Translation designation types are supported. Today QEMU only supports DT=1. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20211203142706.427279-5-mjrosato@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-12-17s390x/pci: use the passthrough measurement update intervalMatthew Rosato1-2/+3
We may have gotten a measurement update interval from the underlying host via vfio -- Use it to set the interval via which we update the function measurement block. Fixes: 28dc86a072 ("s390x/pci: use a PCI Group structure") Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20211203142706.427279-4-mjrosato@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-12-17s390x/pci: don't use hard-coded dma range in reg_ioatMatthew Rosato1-4/+5
Instead use the values from clp info, they will either be the hard-coded values or what came from the host driver via vfio. Fixes: 9670ee752727 ("s390x/pci: use a PCI Function structure") Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <20211203142706.427279-3-mjrosato@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-11-01pci: Export pci_for_each_device_under_bus*()Peter Xu1-3/+2
They're actually more commonly used than the helper without _under_bus, because most callers do have the pci bus on hand. After exporting we can switch a lot of the call sites to use these two helpers. Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20211028043129.38871-3-peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2021-10-13s390x/ipl: check kernel command line sizeMarc Hartmayer1-1/+11
Check if the provided kernel command line exceeds the maximum size of the s390x Linux kernel command line size, which is 896 bytes. Reported-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com> Message-Id: <20211006092631.20732-1-mhartmay@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [thuth: Adjusted format specifier for size_t] Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-10-01machine: Move smp_prefer_sockets to struct SMPCompatPropsYanan Wang1-1/+1
Now we have a common structure SMPCompatProps used to store information about SMP compatibility stuff, so we can also move smp_prefer_sockets there for cleaner code. No functional change intended. Signed-off-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210929025816.21076-15-wangyanan55@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01machine: Prefer cores over sockets in smp parsing since 6.2Yanan Wang1-0/+1
In the real SMP hardware topology world, it's much more likely that we have high cores-per-socket counts and few sockets totally. While the current preference of sockets over cores in smp parsing results in a virtual cpu topology with low cores-per-sockets counts and a large number of sockets, which is just contrary to the real world. Given that it is better to make the virtual cpu topology be more reflective of the real world and also for the sake of compatibility, we start to prefer cores over sockets over threads in smp parsing since machine type 6.2 for different arches. In this patch, a boolean "smp_prefer_sockets" is added, and we only enable the old preference on older machines and enable the new one since type 6.2 for all arches by using the machine compat mechanism. Suggested-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210929025816.21076-10-wangyanan55@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-30qbus: Rename qbus_create() to qbus_new()Peter Maydell3-3/+3
Rename the "allocate and return" qbus creation function to qbus_new(), to bring it into line with our _init vs _new convention. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210923121153.23754-6-peter.maydell@linaro.org
2021-09-30qbus: Rename qbus_create_inplace() to qbus_init()Peter Maydell2-4/+3
Rename qbus_create_inplace() to qbus_init(); this is more in line with our usual naming convention for functions that in-place initialize objects. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20210923121153.23754-5-peter.maydell@linaro.org
2021-09-07s390x/cpumodel: Add more feature to gen16 default modelChristian Borntraeger1-0/+5
Add the new gen16 features to the default model and fence them for machine version 6.1 and earlier. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210907101017.27126-1-borntraeger@de.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-09-06s390x: Replace PAGE_SIZE, PAGE_SHIFT and PAGE_MASKThomas Huth3-10/+10
The PAGE_SIZE macro is causing trouble on Alpine Linux since it clashes with a macro from a system header there. We already have the TARGET_PAGE_SIZE, TARGET_PAGE_MASK and TARGET_PAGE_BITS macros in QEMU anyway, so let's simply replace the PAGE_SIZE, PAGE_MASK and PAGE_SHIFT macro with their TARGET_* counterparts. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/572 Message-Id: <20210901125800.611183-1-thuth@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-09-06hw/s390x/s390-skeys: lazy storage key enablement under TCGDavid Hildenbrand1-14/+51
Let's enable storage keys lazily under TCG, just as we do under KVM. Only fairly old Linux versions actually make use of storage keys, so it can be kind of wasteful to allocate quite some memory and track changes and references if nobody cares. We have to make sure to flush the TLB when enabling storage keys after the VM was already running: otherwise it might happen that we don't catch references or modifications afterwards. Add proper documentation to all callbacks. The kvm-unit-tests skey tests keeps on working with this change. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210903155514.44772-14-david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-09-06hw/s390x/s390-skeys: rename skeys_enabled to skeys_are_enabledDavid Hildenbrand2-8/+8
... and make it return a bool instead. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210903155514.44772-13-david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-09-06hw/s390x/s390-skeys: check if an address is valid before dumping the keyDavid Hildenbrand1-5/+8
Let's validate the given address and report a proper error in case it's not. All call paths now properly check the validity of the given GFN. Remove the TODO. The errors inside the getter and setter should only trigger if something really goes wrong now, for example, with a broken migration stream. Or when we forget to update the storage key allocation with memory hotplug. Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210903155514.44772-12-david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-09-06hw/s390x/s390-skeys: use memory mapping to detect which storage keys to dumpDavid Hildenbrand1-20/+30
Handle it similar to migration. Assert that we're holding the BQL, to make sure we don't see concurrent modifications. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210903155514.44772-11-david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-09-06hw/s390x/s390-skeys: use memory mapping to detect which storage keys to migrateDavid Hildenbrand1-27/+43
Let's use the guest_phys_blocks API to get physical memory regions that are well defined inside our physical address space and migrate the storage keys of these. This is a preparation for having memory besides initial ram defined in the guest physical address space, for example, via memory devices. We get rid of the ms->ram_size dependency. Please note that we will usually have very little (--> 1) physical ranges. With virtio-mem might have significantly more ranges in the future. If that turns out to be a problem (e.g., total memory footprint of the list), we could look into a memory mapping API that avoids creation of a list and instead triggers a callback for each range. Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210903155514.44772-10-david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-09-06vfio-ccw: forward halt/clear errorsCornelia Huck1-4/+34
hsch and csch basically have two parts: execute the command, and perform the halt/clear function. For fully emulated subchannels, it is pretty clear how it will work: check the subchannel state, and actually 'perform the halt/clear function' and set cc 0 if everything looks good. For passthrough subchannels, some of the checking is done within QEMU, but some has to be done within the kernel. QEMU's subchannel state may be such that we can perform the async function, but the kernel may still get a cc != 0 when it is actually executing the instruction. In that case, we need to set the condition actually encountered by the kernel; if we set cc 0 on error, we would actually need to inject an interrupt as well. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Jared Rossi <jrossi@linux.ibm.com> Message-Id: <20210705163952.736020-2-cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-09-01hw: Add compat machines for 6.2Yanan Wang1-1/+13
Add 6.2 machine types for arm/i440fx/q35/s390x/spapr. Signed-off-by: Yanan Wang <wangyanan55@huawei.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-08-26error: Use error_fatal to simplify obvious fatal errors (again)Markus Armbruster1-5/+1
We did this with scripts/coccinelle/use-error_fatal.cocci before, in commit 50beeb68094 and 007b06578ab. This commit cleans up rarer variations that don't seem worth matching with Coccinelle. Cc: Thomas Huth <thuth@redhat.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210720125408.387910-2-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-07-12Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210708' ↵Peter Maydell5-6/+15
into staging s390x updates: - add gen16 cpumodels - refactor/cleanup some code - bugfixes # gpg: Signature made Thu 08 Jul 2021 12:26:21 BST # gpg: using EDDSA key 69A3B536F5CBFC65208026C1DE88BB5641DE66C1 # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF # Subkey fingerprint: 69A3 B536 F5CB FC65 2080 26C1 DE88 BB56 41DE 66C1 * remotes/cohuck-gitlab/tags/s390x-20210708: target/s390x: split sysemu part of cpu models target/s390x: move kvm files into kvm/ target/s390x: remove kvm-stub.c target/s390x: use kvm_enabled() to wrap call to kvm_s390_get_hpage_1m target/s390x: make helper.c sysemu-only target/s390x: split cpu-dump from helper.c target/s390x: move sysemu-only code out to cpu-sysemu.c target/s390x: start moving TCG-only code to tcg/ target/s390x: rename internal.h to s390x-internal.h target/s390x: remove tcg-stub.c hw/s390x: only build tod-tcg from the CONFIG_TCG build hw/s390x: tod: make explicit checks for accelerators when initializing hw/s390x: rename tod-qemu.c to tod-tcg.c target/s390x: meson: add target_user_arch s390x/tcg: Fix m5 vs. m4 field for VECTOR MULTIPLY SUM LOGICAL target/s390x: Fix CC set by CONVERT TO FIXED/LOGICAL s390x/cpumodel: add 3931 and 3932 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-09modules: add s390x module annotationsGerd Hoffmann1-0/+3
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jose R. Ziviani <jziviani@suse.de> Message-Id: <20210624103836.2382472-13-kraxel@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-07target/s390x: move kvm files into kvm/Cho, Yu-Chen2-2/+2
move kvm files into kvm/ After the reshuffling, update MAINTAINERS accordingly. Make use of the new directory: target/s390x/kvm/ Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Cho, Yu-Chen <acho@suse.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210707105324.23400-14-acho@suse.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-07-07target/s390x: start moving TCG-only code to tcg/Cho, Yu-Chen1-1/+1
move everything related to translate, as well as HELPER code in tcg/ mmu_helper.c stays put for now, as it contains both TCG and KVM code. After the reshuffling, update MAINTAINERS accordingly. Make use of the new directory: target/s390x/tcg/ Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Cho, Yu-Chen <acho@suse.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210707105324.23400-8-acho@suse.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-07-07hw/s390x: only build tod-tcg from the CONFIG_TCG buildCho, Yu-Chen1-1/+3
this will allow in later patches to remove unneeded stubs in target/s390x. Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Cho, Yu-Chen <acho@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210707105324.23400-5-acho@suse.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-07-07hw/s390x: tod: make explicit checks for accelerators when initializingCho, Yu-Chen1-1/+8
replace general "else" with specific checks for each possible accelerator. Handle qtest as a NOP, and error out for an unknown accelerator used in combination with tod. Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Cho, Yu-Chen <acho@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210707105324.23400-4-acho@suse.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-07-07hw/s390x: rename tod-qemu.c to tod-tcg.cCho, Yu-Chen2-2/+2
we stop short of renaming the actual qom object though, so type remains TYPE_QEMU_S390_TOD, ie "s390-tod-qemu". Signed-off-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Cho, Yu-Chen <acho@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210707105324.23400-3-acho@suse.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-07-02virtio: disable ioeventfd for record/replayPavel Dovgalyuk1-0/+6
virtio devices support separate iothreads waiting for events from file descriptors. These are asynchronous events that can't be recorded and replayed, therefore this patch disables ioeventfd for all devices when record or replay is enabled. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Message-Id: <162125678869.1252810.4317416444097392406.stgit@pasha-ThinkPad-X280> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-06-21s390x/css: Add passthrough IRBEric Farman2-1/+16
Wire in the subchannel callback for building the IRB ESW and ECW space for passthrough devices, and copy the hardware's ESW into the IRB we are building. If the hardware presented concurrent sense, then copy that sense data into the IRB's ECW space. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20210617232537.1337506-5-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-06-21s390x/css: Refactor IRB constructionEric Farman3-16/+31
Currently, all subchannel types have "sense data" copied into the IRB.ECW space, and a couple flags enabled in the IRB.SCSW and IRB.ESW. But for passthrough (vfio-ccw) subchannels, this data isn't populated in the first place, so enabling those flags leads to unexpected behavior if the guest tries to process the sense data (zeros) in the IRB.ECW. Let's add a subchannel callback that builds these portions of the IRB, and move the existing code into a routine for those virtual subchannels. The passthrough subchannels will be able to piggy-back onto this later. Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20210617232537.1337506-4-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-06-21s390x/css: Split out the IRB sense dataEric Farman1-7/+12
Let's move this logic into its own routine, so it can be reused later. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210617232537.1337506-3-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-06-21s390x/css: Introduce an ESW structEric Farman1-6/+13
The Interrupt Response Block is comprised of several other structures concatenated together, but only the 12-byte Subchannel-Status Word (SCSW) is defined as a proper struct. Everything else is a simple array of 32-bit words. Let's define a proper struct for the 20-byte Extended-Status Word (ESW) so that we can make good decisions about the sense data that would go into the ECW area for virtual vs passthrough devices. [CH: adapted ESW definition to build with mingw, as discussed] Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20210617232537.1337506-2-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-06-21s390x/cpumodel: Bump up QEMU model to a stripped-down IBM z14 GA2David Hildenbrand1-0/+3
TCG implements everything we need to run basic z14 OS+software. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210608092337.12221-27-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella1-1/+1
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-20hw/s390x/ccw: Register qbus type in abstract TYPE_CCW_DEVICE parentPhilippe Mathieu-Daudé5-4/+2
Instead of having all TYPE_CCW_DEVICE children set the bus type to TYPE_VIRTUAL_CSS_BUS, do it once in the abstract parent. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20210424145313.3287400-1-f4bug@amsat.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth1-1/+0
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include cpu.h if it's not really necessaryThomas Huth12-12/+0
Stop including cpu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-4-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include hw/boards.h if it's not really necessaryThomas Huth1-2/+0
Stop including hw/boards.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-3-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include sysemu/sysemu.h if it's not really necessaryThomas Huth2-2/+0
Stop including sysemu/sysemu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-2-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Do not include hw/sysbus.h if it is not necessaryThomas Huth2-2/+0
Many files include hw/sysbus.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210327082804.2259480-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-04-30hw: add compat machines for 6.1Cornelia Huck1-1/+13
Add 6.1 machine types for arm/i440fx/q35/s390x/spapr. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Message-id: 20210331111900.118274-1-cohuck@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-04-09s390x: css: report errors from ccw_dstream_read/writePierre Morel3-25/+60
ccw_dstream_read/write functions returned values are sometime not taking into account and reported back to the upper level of interpretation of CCW instructions. It follows that accessing an invalid address does not trigger a subchannel status program check to the guest as it should. Let's test the return values of ccw_dstream_write[_buf] and ccw_dstream_read[_buf] and report it to the caller. Cc: qemu-stable@nongnu.org Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <1617899529-9329-2-git-send-email-pmorel@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-03-26s390x: modularize virtio-gpu-ccwGerd Hoffmann2-2/+10
Since the virtio-gpu-ccw device depends on the hw-display-virtio-gpu module, which provides the type virtio-gpu-device, packaging the hw-display-virtio-gpu module as a separate package that may or may not be installed along with the qemu package leads to problems. Namely if the hw-display-virtio-gpu is absent, qemu continues to advertise virtio-gpu-ccw, but it aborts not only when one attempts using virtio-gpu-ccw, but also when libvirtd's capability probing tries to instantiate the type to introspect it. Let us thus introduce a module named hw-s390x-virtio-gpu-ccw that is going to provide the virtio-gpu-ccw device. The hw-s390x prefix was chosen because it is not a portable device. With virtio-gpu-ccw built as a module, the correct way to package a modularized qemu is to require that hw-display-virtio-gpu must be installed whenever the module hw-s390x-virtio-gpu-ccw. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20210317095622.2839895-4-kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-26s390x: add have_virtio_ccwGerd Hoffmann2-0/+7
Introduce a symbol which can be used to prevent ccw modules being loaded into system emulators without ccw support. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20210317095622.2839895-3-kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-15s390x/pci: Add missing initialization for g_autofree variablesMiroslav Rezanina1-6/+3
When declaring g_autofree variable without initialization, compiler will raise "may be used uninitialized in this function" warning due to automatic free handling. This is mentioned in docs/devel/style.rst (quote from section "Automatic memory deallocation"): * Variables declared with g_auto* MUST always be initialized, otherwise the cleanup function will use uninitialized stack memory Add initialization for these declarations to prevent the warning and comply with coding style. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Fixes: cd7498d07fbb ("s390x/pci: Add routine to get the vfio dma available count") Fixes: 1e7552ff5c34 ("s390x/pci: get zPCI function info from host") Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Message-Id: <20210315101352.152888-1-mrezanin@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-03-09sysemu: Let VMChangeStateHandler take boolean 'running' argumentPhilippe Mathieu-Daudé1-1/+1
The 'running' argument from VMChangeStateHandler does not require other value than 0 / 1. Make it a plain boolean. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20210111152020.1422021-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-04virtio-ccw: commands on revision-less devicesCornelia Huck1-7/+14
The virtio standard specifies that any non-transitional device must reject commands prior to revision setting (which we do). Devices that are transitional need to assume revision 0 (legacy) if the driver sends a non-revision-setting command first in order to support legacy drivers. We neglected to do the latter. Fortunately, nearly everything worked as intended anyway; the only problem was not properly rejecting revision setting after some other command had been issued. Easy to fix by setting revision to 0 if we see a non-revision command on a legacy-capable revision-less device. Found by code inspection, not observed in the wild. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20210216111830.1087847-1-cohuck@redhat.com>
2021-03-04s390x/pci: restore missing Query PCI Function CLP dataMatthew Rosato1-0/+5
Some CLP response data was accidentally dropped when fixing endianness issues with the Query PCI Function CLP response. All of these values are sent as 0s to the guest for emulated devices, so the impact is only observed on passthrough devices. Fixes: a4e2fff1b104 ("s390x/pci: fix endianness issues") Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Message-Id: <1613681609-9349-1-git-send-email-mjrosato@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-03-04hw/s390x: fix build for virtio-9p-ccwHalil Pasic1-1/+3
Commit 2c44220d05 ("meson: convert hw/arch*"), which migrated the old Makefile.objs to meson.build accidentally excluded virtio-ccw-9p.c and thus the virtio-9p-ccw device from the build (and potentially also included the file virtio-ccw-blk.c twice in the source set). And since CONFIG_VIRTFS can't be used the way it was used here (see commit 2c9dce0196 ("meson: do not use CONFIG_VIRTFS")), the preconditions have to be written differently. Let's fix this! Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Fixes: 2c44220d05 ("meson: convert hw/arch*") Reported-by: Jakob Naucke <jakob.naucke@ibm.com> Cc: qemu-stable@nongnu.org Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210218034059.1096078-1-pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-02-08s390: Recognize confidential-guest-support optionDavid Gibson2-0/+65
At least some s390 cpu models support "Protected Virtualization" (PV), a mechanism to protect guests from eavesdropping by a compromised hypervisor. This is similar in function to other mechanisms like AMD's SEV and POWER's PEF, which are controlled by the "confidential-guest-support" machine option. s390 is a slightly special case, because we already supported PV, simply by using a CPU model with the required feature (S390_FEAT_UNPACK). To integrate this with the option used by other platforms, we implement the following compromise: - When the confidential-guest-support option is set, s390 will recognize it, verify that the CPU can support PV (failing if not) and set virtio default options necessary for encrypted or protected guests, as on other platforms. i.e. if confidential-guest-support is set, we will either create a guest capable of entering PV mode, or fail outright. - If confidential-guest-support is not set, guests might still be able to enter PV mode, if the CPU has the right model. This may be a little surprising, but shouldn't actually be harmful. To start a guest supporting Protected Virtualization using the new option use the command line arguments: -object s390-pv-guest,id=pv0 -machine confidential-guest-support=pv0 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
generated by cgit v1.1 at 2024-12-28 20:40:46 +0000