aboutsummaryrefslogtreecommitdiff
path: root/hw/s390x
AgeCommit message (Collapse)AuthorFilesLines
2019-06-24vfio-ccw: support async command subregionCornelia Huck2-4/+43
A vfio-ccw device may provide an async command subregion for issuing halt/clear subchannel requests. If it is present, use it for sending halt/clear request to the device; if not, fall back to emulation (as done today). Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Message-Id: <20190613092542.2834-1-cohuck@redhat.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster3-1/+2
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster24-1/+29
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-06-11qemu-common: Move qemu_isalnum() etc. to qemu/ctype.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-3-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-11qemu-common: Move tcg_enabled() etc. to sysemu/tcg.hMarkus Armbruster1-0/+1
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h, sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in qemu-common.h. This necessitates inclusion of qemu-common.h into headers, which is against the rules spelled out in qemu-common.h's file comment. Move tcg_enabled() & friends into their own header sysemu/tcg.h, and adjust #include directives. Cc: Richard Henderson <rth@twiddle.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-2-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [Rebased with conflicts resolved automatically, except for accel/tcg/tcg-all.c]
2019-06-07s390x: Bump the "qemu" CPU model up to a stripped-down z13David Hildenbrand1-0/+2
We don't care about the other two missing base features: - S390_FEAT_DFP_PACKED_CONVERSION - S390_FEAT_GROUP_GEN13_PTFF Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com>
2019-06-06hw/s390x/event-facility: Use the QOM BUS() macro to access BusState.qbusPhilippe Mathieu-Daudé1-2/+2
Rather than looking inside the definition of a BusState with "s->bus.qbus", use the QOM prefered style: "BUS(&s->bus)". This patch was generated using the following Coccinelle script: // Use BUS() macros to access BusState.qbus @use_bus_macro_to_access_qbus@ expression obj; identifier bus; @@ -&obj->bus.qbus +BUS(&obj->bus) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190528164020.32250-5-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-17s390/css: handle CCW_FLAG_SKIPCornelia Huck1-4/+18
If a ccw has CCW_FLAG_SKIP set, and the command is of type read, read backwards, or sense, no data should be written to the guest for that command. Reviewed-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190516133327.11430-1-cohuck@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-05-17s390/ipl: cast to SCSIDevice directlyCornelia Huck1-2/+1
Coverity notes that the result of object_dynamic_cast() to SCSIDevice is not checked in s390_gen_initial_iplp(); as we know that we always have a SCSIDevice in that branch, we can instead cast via SCSI_DEVICE directly. Coverity: CID 1401098 Fixes: 44445d8668f4 ("s390 vfio-ccw: Add bootindex property and IPLB data") Message-Id: <20190502155516.12415-1-cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-26Merge remote-tracking branch ↵Peter Maydell1-1/+13
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine queue, 2019-04-25 * 4.1 machine-types (Cornelia Huck) * Support MAP_SYNC on pmem memory backends (Zhang Yi) * -cpu parsing fixes and cleanups (Eduardo Habkost) * machine initialization cleanups (Wei Yang, Markus Armbruster) # gpg: Signature made Thu 25 Apr 2019 18:54:57 BST # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: util/mmap-alloc: support MAP_SYNC in qemu_ram_mmap() linux-headers: add linux/mman.h. scripts/update-linux-headers: add linux/mman.h util/mmap-alloc: Add a 'is_pmem' parameter to qemu_ram_mmap cpu: Fix crash with empty -cpu option cpu: Rename parse_cpu_model() to parse_cpu_option() vl: Simplify machine_parse() vl: Clean up after previous commit vl.c: allocate TYPE_MACHINE list once during bootup vl.c: make find_default_machine() local hw: add compat machines for 4.1 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-25hw: add compat machines for 4.1Cornelia Huck1-1/+13
Add 4.1 machine types for arm/i440fx/q35/s390x/spapr. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190411102025.22559-1-cohuck@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-04-25Merge tag 's390-ccw-bios-2019-04-12' into s390-next-stagingCornelia Huck2-15/+55
Support for booting from a vfio-ccw passthrough dasd device # gpg: Signature made Fri 12 Apr 2019 01:17:03 PM CEST # gpg: using RSA key 2ED9D774FE702DB5 # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] * tag 's390-ccw-bios-2019-04-12': pc-bios/s390: Update firmware images s390-bios: Use control unit type to find bootable devices s390-bios: Support booting from real dasd device s390-bios: Add channel command codes/structs needed for dasd-ipl s390-bios: Use control unit type to determine boot method s390-bios: Refactor virtio to run channel programs via cio s390-bios: Factor finding boot device out of virtio code path s390-bios: Extend find_dev() for non-virtio devices s390-bios: cio error handling s390-bios: Support for running format-0/1 channel programs s390-bios: ptr2u32 and u32toptr s390-bios: Map low core memory s390-bios: Decouple channel i/o logic from virtio s390-bios: Clean up cio.h s390-bios: decouple common boot logic from virtio s390-bios: decouple cio setup from virtio s390 vfio-ccw: Add bootindex property and IPLB data Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-25exec: Introduce qemu_maxrampagesize() and rename qemu_getrampagesize()David Hildenbrand1-1/+1
Rename qemu_getrampagesize() to qemu_minrampagesize(). While at it, properly rename find_max_supported_pagesize() to find_min_backend_pagesize(). s390x is actually interested into the maximum ram pagesize, so introduce and use qemu_maxrampagesize(). Add a TODO, indicating that looking at any mapped memory backends is not 100% correct in some cases. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190417113143.5551-3-david@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-25s390x/kvm: Configure page size after memory has actually been initializedDavid Hildenbrand1-0/+12
Right now we configure the pagesize quite early, when initializing KVM. This is long before system memory is actually allocated via memory_region_allocate_system_memory(), and therefore memory backends marked as mapped. Instead, let's configure the maximum page size after initializing memory in s390_memory_init(). cap_hpage_1m is still properly configured before creating any CPUs, and therefore before configuring the CPU model and eventually enabling CMMA. This is not a fix but rather a preparation for the future, when initial memory might reside on memory backends (not the case for s390x right now) We will replace qemu_getrampagesize() soon by a function that will always return the maximum page size (not the minimum page size, which only works by pure luck so far, as there are no memory backends). Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190417113143.5551-2-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-12s390 vfio-ccw: Add bootindex property and IPLB dataJason J. Herne2-15/+55
Add bootindex property and iplb data for vfio-ccw devices. This allows us to forward boot information into the bios for vfio-ccw devices. Refactor s390_get_ccw_device() to return device type. This prevents us from having to use messy casting logic in several places. Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1554388475-18329-2-git-send-email-jjherne@linux.ibm.com> [thuth: fixed "typedef struct VFIOCCWDevice" build failure with clang] Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-03hw/s390x/3270-ccw: avoid taking address of fields in packed structDaniel P. Berrangé1-4/+4
Compiling with GCC 9 complains hw/s390x/3270-ccw.c: In function ‘emulated_ccw_3270_cb’: hw/s390x/3270-ccw.c:81:19: error: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer value [-Werror=address-of-packed-member] 81 | SCSW *s = &sch->curr_status.scsw; | ^~~~~~~~~~~~~~~~~~~~~~ This local variable is only present to save a little bit of typing when setting the field later. Get rid of this to avoid the warning about unaligned accesses. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190329111104.17223-15-berrange@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-03hw/s390x/ipl: avoid taking address of fields in packed structDaniel P. Berrangé1-7/+5
Compiling with GCC 9 complains hw/s390x/ipl.c: In function ‘s390_ipl_set_boot_menu’: hw/s390x/ipl.c:256:25: warning: taking address of packed member of ‘struct QemuIplParameters’ may result in an unaligned pointer value [-Waddress-of-packed-member] 256 | uint32_t *timeout = &ipl->qipl.boot_menu_timeout; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ This local variable is only present to save a little bit of typing when setting the field later. Get rid of this to avoid the warning about unaligned accesses. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190329111104.17223-14-berrange@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-03hw/s390/css: avoid taking address members in packed structsDaniel P. Berrangé1-201/+187
The GCC 9 compiler complains about many places in s390 code that take the address of members of the 'struct SCHIB' which is marked packed: hw/s390x/css.c: In function ‘sch_handle_clear_func’: hw/s390x/css.c:698:15: warning: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer val\ ue [-Waddress-of-packed-member] 698 | PMCW *p = &sch->curr_status.pmcw; | ^~~~~~~~~~~~~~~~~~~~~~ hw/s390x/css.c:699:15: warning: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer val\ ue [-Waddress-of-packed-member] 699 | SCSW *s = &sch->curr_status.scsw; | ^~~~~~~~~~~~~~~~~~~~~~ ...snip many more... Almost all of these are just done for convenience to avoid typing out long variable/field names when referencing struct members. We can get most of this convenience by taking the address of the 'struct SCHIB' instead, avoiding triggering the compiler warnings. In a couple of places we copy via a local variable which is a technique already applied elsewhere in s390 code for this problem. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20190329111104.17223-13-berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-03-28Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-0/+1
* Kconfig improvements (msi_nonbroken, imply for default PCI devices) * intel-iommu: sharing passthrough FlatViews (Peter) * Fix for SEV with VFIO (Brijesh) * Allow compilation without CONFIG_PARALLEL (Thomas) # gpg: Signature made Thu 21 Mar 2019 16:42:24 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (23 commits) virtio-vga: only enable for specific boards config-all-devices.mak: rebuild on reconfigure minikconf: fix parser typo intel-iommu: optimize nodmar memory regions test-announce-self: convert to qgraph hw/alpha/Kconfig: DP264 hardware requires e1000 network card hw/hppa/Kconfig: Dino board requires e1000 network card hw/sh4/Kconfig: r2d machine requires the rtl8139 network card hw/ppc/Kconfig: e500 based machines require virtio-net-pci device hw/ppc/Kconfig: Bamboo machine requires e1000 network card hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices hw/mips/Kconfig: Malta machine requires the pcnet network card hw/i386/Kconfig: enable devices that can be created by default hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI hw/isa/Kconfig: i82378 SuperIO requires PC speaker device prep: do not select I82374 hw/i386/Kconfig: PC uses I8257, not I82374 hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL target/i386: sev: Do not pin the ram device memory region memory: Fix the memory region type assignment order ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/rdma/Makefile.objs # hw/riscv/sifive_plic.c
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster1-2/+2
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-18kconfig: add CONFIG_MSI_NONBROKENPaolo Bonzini1-0/+1
Not all interrupt controllers have a working implementation of message-signalled interrupts; in some cases, the guest may expect MSI to work but it won't due to the buggy or lacking emulation. In QEMU this is represented by the "msi_nonbroken" variable. This patch adds a new configuration symbol enabled whenever the binary contains an interrupt controller that will set "msi_nonbroken". We can then use it to remove devices that cannot be possibly added to the machine, because they require MSI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07s390x: express dependencies with KconfigThomas Huth2-1/+12
Instead of hard-coding all config switches in the config file default-configs/s390x-softmmu.mak, let's use the new Kconfig files to express the necessary dependencies: The S390_CCW_VIRTIO config switch for the "s390-ccw-virtio" machine now selects all non-optional devices. And since we already have the VIRTIO_PCI and VIRTIO_MMIO config switches for the other two virtio transports, this patch also introduces a new config switch VIRTIO_CCW for the third, s390x-specific virtio transport, so that all three virtio transports are now handled in the same way. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini1-0/+2
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-06qdev: Let the hotplug_handler_unplug() caller delete the deviceDavid Hildenbrand2-6/+9
When unplugging a device, at one point the device will be destroyed via object_unparent(). This will, one the one hand, unrealize the removed device hierarchy, and on the other hand, destroy/free the device hierarchy. When chaining hotplug handlers, we want to overwrite a bus hotplug handler by the machine hotplug handler, to be able to perform some part of the plug/unplug and to forward the calls to the bus hotplug handler. For now, the bus hotplug handler would trigger an object_unparent(), not allowing us to perform some unplug action on a device after we forwarded the call to the bus hotplug handler. The device would be gone at that point. machine_unplug_handler(dev) /* eventually do unplug stuff */ bus_unplug_handler(dev) /* dev is gone, we can't do more unplug stuff */ So move the object_unparent() to the original caller of the unplug. For now, keep the unrealize() at the original places of the object_unparent(). For implicitly chained hotplug handlers (e.g. pc code calling acpi hotplug handlers), the object_unparent() has to be done by the outermost caller. So when calling hotplug_handler_unplug() from inside an unplug handler, nothing is to be done. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> calls unrealize(dev) /* we can do more unplug stuff but device already unrealized */ } object_unparent(dev) In the long run, every unplug action should be factored out of the unrealize() function into the unplug handler (especially for PCI). Then we can get rid of the additonal unrealize() calls and object_unparent() will properly unrealize the device hierarchy after the device has been unplugged. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> only unplugs, does not unrealize /* we can do more unplug stuff */ } object_unparent(dev) -> will unrealize The original approach was suggested by Igor Mammedov for the PCI part, but I extended it to all hotplug handlers. I consider this one step into the right direction. To summarize: - object_unparent() on synchronous unplugs is done by common code -- "Caller of hotplug_handler_unplug" - object_unparent() on asynchronous unplugs ("unplug requests") has to be done manually -- "Caller of hotplug_handler_unplug" Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190228122849.4296-2-david@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-04s390x/vfio-ap: Implement hot plug/unplug of vfio-ap deviceTony Krowiak1-1/+11
Introduces hot plug/unplug support for the vfio-ap device. To hot plug a vfio-ap device using the QEMU device_add command: (qemu) device_add vfio-ap,sysfsdev=$path-to-mdev Where $path-to-mdev is the absolute path to the mediated matrix device to which AP resources to be used by the guest have been assigned. A vfio-ap device can be hot plugged only if: 1. A vfio-ap device has not been attached to the virtual machine's ap-bus via the QEMU command line or a prior hot plug action. 2. The guest was started with the CPU model feature for AP enabled (e.g., -cpu host,ap=on) To hot unplug a vfio-ap device using the QEMU device_del command: (qemu) device_del vfio-ap,sysfsdev=$path-to-mdev Where $path-to-mdev is the absolute path to the mediated matrix device specified when the vfio-ap device was attached to the virtual machine's ap-bus. A vfio-ap device can be hot unplugged only if: 1. A vfio-ap device has been attached to the virtual machine's ap-bus via the QEMU command line or a prior hot plug action. 2. The guest was started with the CPU model feature for AP enabled (e.g., -cpu host,ap=on) Please note that a hot plug handler is not necessary for the vfio-ap device because the AP matrix configuration for the guest is performed by the kernel device driver when the vfio-ap device is realized. The vfio-ap device represents a VFIO mediated device created in the host sysfs for use by a guest. The mdev device is configured with an AP matrix (i.e., adapters and domains) via its sysfs attribute interfaces prior to starting the guest or plugging a vfio-ap device in. When the device is realized, a file descriptor is opened on the mdev device which results in a callback to the vfio_ap kernel device driver. The device driver then configures the AP matrix in the guest's SIE state description from the AP matrix assigned via the mdev device's sysfs interfaces. The AP devices will be created for the guest when the AP bus running on the guest subsequently performs its periodic scan for AP devices. The qdev_simple_device_unplug_cb() callback function is used for the same reaons; namely, the vfio_ap kernel device driver will perform the AP resource de-configuration for the guest when the vfio-ap device is unplugged. When the vfio-ap device is unrealized, the mdev device file descriptor is closed which results in a callback to the vfio_ap kernel device driver. The device driver then clears the AP matrix configuration in the guest's SIE state description and resets all of the affected queues. The AP devices created for the guest will be removed when the AP bus running on the guest subsequently performs its periodic scan and finds there are no longer any AP resources assigned to the guest. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <1550519397-25359-2-git-send-email-akrowiak@linux.ibm.com> [CH: adapt to changed qbus_set_hotplug_handler() signature] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-18Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190219' ↵Peter Maydell2-4/+4
into staging ppc patch queue 2019-02-19 Here's the next batch of ppc and spapr patches. Higlights are: * A bunch of improvements to TCG handling of vector instructions from Richard Henderson and Marc Cave-Ayland * Cleanup to the XICS interrupt controller from Greg Kurz, removing the special KVM subclasses which were a bad idea * Some refinements to the XIVE interrupt controller from Cédric Le Goater * Fix from Fabiano Rosas for a really dumb buffer overflow in the device tree code for memory hotplug * Code for allowing access to SPRs from the gdb stub from Fabiano Rosas * Assorted minor fixes and cleanups # gpg: Signature made Mon 18 Feb 2019 13:47:54 GMT # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-4.0-20190219: (43 commits) target/ppc: convert vmin* and vmax* to vector operations target/ppc: convert vadd*s and vsub*s to vector operations target/ppc: Split out VSCR_SAT to a vector field target/ppc: Add set_vscr_sat target/ppc: Use mtvscr/mfvscr for vmstate target/ppc: Add helper_mfvscr target/ppc: Remove vscr_nj and vscr_sat target/ppc: Use helper_mtvscr for reset and gdb target/ppc: Pass integer to helper_mtvscr target/ppc: convert xxsel to vector operations target/ppc: convert xxspltw to vector operations target/ppc: convert xxspltib to vector operations target/ppc: convert VSX logical operations to vector operations target/ppc: convert vsplt[bhw] to use vector operations target/ppc: convert vspltis[bhw] to use vector operations target/ppc: convert vaddu[b,h,w,d] and vsubu[b,h,w,d] over to use vector operations target/ppc: convert VMX logical instructions to use vector operations xics: Drop the KVM ICS class spapr/irq: Use the "simple" ICS class for KVM xics: Handle KVM interrupt presentation from "simple" ICS code ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-18Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-02-18' into ↵Peter Maydell1-1/+1
staging QAPI patches for 2019-02-18 # gpg: Signature made Mon 18 Feb 2019 13:44:30 GMT # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2019-02-18: qapi: move RTC_CHANGE to the target schema qmp: Deprecate query-events in favor of query-qmp-schema Revert "qapi-events: add 'if' condition to implicit event enum" qapi: remove qmp_unregister_command() qapi: make query-cpu-definitions depend on specific targets qapi: make query-cpu-model-expansion depend on s390 or x86 qapi: make query-gic-capabilities depend on TARGET_ARM target.json: add a note about query-cpu* not being s390x-specific qapi: make s390 commands depend on TARGET_S390X qapi: make rtc-reset-reinjection and SEV depend on TARGET_I386 qapi: New module target.json build: Deal with all of QAPI's .o in qapi/Makefile.objs build-sys: move qmp-introspect per target qapi: Generate QAPIEvent stuff into separate files qapi: Prepare for system modules other than 'builtin' qapi: Clean up modular built-in code generation a bit qapi: Fix up documentation for recent commit a95291007b2 qapi: Belatedly document modular code generation Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-18qapi: make s390 commands depend on TARGET_S390XMarc-André Lureau1-1/+1
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190214152251.2073-11-armbru@redhat.com>
2019-02-18s390x/cpumodel: default enable mepoch for z14 and laterCollin Walling1-1/+2
Latest systems and host kernels support mepoch, which is a feature that was meant to be supported for z14 GA1 from the get-go. Let's copy it to the z14 GA1 default CPU model. Machines s390-ccw-virtio-3.1 and older will retain the old CPU models and will not provide this bit nor the extended PTFF functions in the default model. Signed-off-by: Collin Walling <walling@linux.ibm.com> Message-Id: <20190212011657.18324-2-walling@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-18s390x: add zPCI feature to "qemu" CPU modelDavid Hildenbrand1-0/+3
As we now always have PCI support, let's add it to the "qemu" CPU model, taking care of backwards compatibility. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190212112323.15904-1-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-18s390x: always provide pci supportCornelia Huck3-83/+1
We tried to make pci support optional on s390x in the past; unfortunately, we still require the s390 phb to be created unconditionally due to backwards compatibility issues. Instead of sinking more effort into this (including compat handling for older machines etc.) for non-obvious gains, let's just make CONFIG_PCI something that is always set on s390x. Note that you can still fence off pci for the _guest_ if you provide a cpu model without the zpci feature. Message-Id: <20190211113255.3837-1-cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-17qdev: pass an Object * to qbus_set_hotplug_handler()Michael Roth2-4/+4
Certain devices types, like memory/CPU, are now being handled using a hotplug interface provided by a top-level MachineClass. Hotpluggable host bridges are another such device where it makes sense to use a machine-level hotplug handler. However, unlike those devices, host-bridges have a parent bus (the main system bus), and devices with a parent bus use a different mechanism for registering their hotplug handlers: qbus_set_hotplug_handler(). This interface currently expects a handler to be a subclass of DeviceClass, but this is not the case for MachineClass, which derives directly from ObjectClass. Internally, the interface only requires an ObjectClass, so expose that in qbus_set_hotplug_handler(). Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <154999589921.690774.3640149277362188566.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-05Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2-4/+7
* cpu-exec fixes (Emilio, Laurent) * TCG bugfix in queue.h (Paolo) * high address load for linuxboot (Zhijian) * PVH support (Liam, Stefano) * misc i386 changes (Paolo, Robert, Doug) * configure tweak for openpty (Thomas) * elf2dmp port to Windows (Viktor) * initial improvements to Makefile infrastructure (Yang + GSoC 2013) # gpg: Signature made Tue 05 Feb 2019 17:34:42 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (76 commits) queue: fix QTAILQ_FOREACH_REVERSE_SAFE scsi-generic: Convert from DPRINTF() macro to trace events scsi-disk: Convert from DPRINTF() macro to trace events pc: Use hotplug_handler_(plug|unplug|unplug_request) i386: hvf: Fix smp boot hangs hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller hw/tricore/Makefile.objs: Create CONFIG_* for tricore hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc hw/moxie/Makefile.objs: Conditionally build moxie hw/hppa/Makefile.objs: Create CONFIG_* for hppa hw/cris/Makefile.objs: Create CONFIG_* for cris hw/alpha/Makefile.objs: Create CONFIG_* for alpha hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards hw/nios2/Makefile.objs: Conditionally build nios2 hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # qemu-deprecated.texi
2019-02-05hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and ↵Paolo Bonzini1-1/+1
devices Make hw/s390x configurable and add new CONFIG_* to the default-configs/s390x*-softmmu.mak. This will be used to enable/disable vfio-ccw. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-14-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05elf: Add optional function ptr to load_elf() to parse ELF notesLiam Merwick1-3/+6
This patch adds an optional function pointer, 'elf_note_fn', to load_elf() which causes load_elf() to additionally parse any ELF program headers of type PT_NOTE and check to see if the ELF Note is of the type specified by the 'translate_opaque' arg. If a matching ELF Note is found then the specfied function pointer is called to process the ELF note. Passing a NULL function pointer results in ELF Notes being skipped. The first consumer of this functionality is the PVHboot support which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while loading the uncompressed kernel binary in order to discover the boot entry address for the x86/HVM direct boot ABI. Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05s390x/pci: Unplug remaining requested devices on pcihost resetDavid Hildenbrand1-0/+15
When resetting the guest we should unplug and remove all devices that are still pending. With this patch, the requested device will be unplugged on reboot (S390_RESET_EXTERNAL and S390_RESET_REIPL, which reset the pcihost bridge via qemu_devices_reset()). This approach is similar to what's done for acpi PCI hotplug in acpi_pcihp_reset() -> acpi_pcihp_update() -> acpi_pcihp_update_hotplug_bus() -> acpi_pcihp_eject_slot(). s390_pci_generate_plug_event()'s will still be generated, I guess this is not an issue. The same thing would happen right now when unplugging a device just before starting the guest. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190130155733.32742-7-david@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-05s390x/pci: Warn when adding PCI devices without the 'zpci' featureDavid Hildenbrand1-0/+6
We decided to always create the PCI host bridge, even if 'zpci' is not enabled (due to migration compatibility). This however right now allows to add zPCI/PCI devices to a VM although the guest will never actually see them, confusing people that are using a simple CPU model that has no 'zpci' enabled - "Why isn't this working" (David Hildenbrand) Let's check for 'zpci' and at least print a warning that this will not work as expected. We could also bail out, however that might break existing QEMU commandlines. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190130155733.32742-4-david@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-05s390x/pci: Fix hotplugging of PCI bridgesDavid Hildenbrand1-9/+19
When hotplugging a PCI bridge right now to the root port, we resolve pci_get_bus(pdev)->parent_dev, which results in a SEGFAULT. Hotplugging really only works right now when hotplugging to another bridge. Instead, we have to properly check if we are already at the root. Let's cleanup the code while at it a bit and factor out updating the subordinate bus number into a separate function. The check for "old_nr < nr" is right now not strictly necessary, but makes it more obvious what is actually going on. Most probably fixing up the topology is not our responsibility when hotplugging. The guest has to sort this out. But let's keep it for now and only fix current code to not crash. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190130155733.32742-3-david@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-05s390x/pci: Fix primary bus number for PCI bridgesDavid Hildenbrand1-5/+8
The primary bus number corresponds always to the bus number of the bus the bridge is attached to. Right now, if we have two bridges attached to the same bus (e.g. root bus) this is however not the case. The first bridge will have primary bus 0, the second bridge primary bus 1, which is wrong. Fix the assignment. While at it, drop setting the PCI_SUBORDINATE_BUS temporarily to 0xff. Setting it temporarily to that value (as discussed e.g. in [1]), is only relevant for a running system that probes the buses. The value is effectively unused for us just doing a DFS. Also add a comment why we have to reassign during every reset (which I found to be surprising. Please note that hotplugging of bridges is in general still broken, will be fixed next. [1] http://www.science.unitn.it/~fiorella/guidelinux/tlk/node76.html Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190130155733.32742-2-david@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-04s390x/pci: mark zpci devices as unmigratableCornelia Huck1-0/+10
We currently don't migrate any state for zpci devices, which are coupled with standard pci devices. This means funny things happen when we e.g. try to migrate with a virtio-pci device but the s390x- specific zpci state is not migrated (vfio-pci is not affected, as it is not migratable anyway.) Until this is fixed, mark zpci devices as unmigratable. Reported-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-04s390x/pci: Drop release timer and replace it with a flagDavid Hildenbrand2-33/+8
Let's handle it similar to x86 ACPI PCI code and don't use a timer. Instead, remember if an unplug request is pending and keep it pending for eternity. (a follow up patch will process the request on reboot). We expect that a guest that is up and running, will process the unplug request and trigger the unplug. This is normal operation, no timer needed. If the guest does not react, this usually means something in the guest is going wrong. Simply removing the device after 30 seconds does not really sound like a good idea. It might sometimes be wanted, but I consider this rather an "opt-in" decision as it might harm a guest not prepared for it. If we ever actually want a "forced/surprise removal", we will have to implement something on top of the existing "device_del" framework. E.g. also x86 might want to do a forced/surprise removal of PCI devices under some conditions. "device_del X, forced=true" could be an option and will require changes to the hotplug handler infrastructure. This will then move the responsibility on when to do a forced removal to a higher level. Doing a forced removal right now over-complicates things and doesn't really seem to be required. Let's allow to send multiple requests. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190130155733.32742-6-david@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-04s390x/pci: Introduce unplug requests and split unplug handlerDavid Hildenbrand2-54/+113
PCI on s390x is really weird and how it was modeled in QEMU might not have been the right choice. Anyhow, right now it is the case that: - Hotplugging a PCI device will silently create a zPCI device (if none is provided) - Hotunplugging a zPCI device will unplug the PCI device (if any) - Hotunplugging a PCI device will unplug also the zPCI device As far as I can see, we can no longer change this behavior. But we should fix it. Both device types are handled via a single hotplug handler call. This is problematic for various reasons: 1. Unplugging via the zPCI device allows to unplug devices that are not hot removable. (check performed in qdev_unplug()) - bad. 2. Hotplug handler chains are not possible for the unplug case. In the future, the machine might want to override hotplug handlers, to process device specific stuff and to then branch off to the actual hotplug handler. We need separate hotplug handler calls for both the PCI and zPCI device to make this work reliably. All other PCI implementations are already prepared to handle this correctly, only s390x is missing. Therefore, introduce the unplug_request handler and properly perform unplug checks by redirecting to the separate unplug_request handlers. When finally unplugging, perform two separate hotplug_handler_unplug() calls, first for the PCI device, followed by the zPCI device. This now nicely splits unplugging paths for both devices. The redirect part is a little hairy, as the user is allowed to trigger unplug either via the PCI or the zPCI device. So redirect always to the PCI unplug request handler first and remember if that check has been performed in the zPCI device. Redirect then to the zPCI device unplug request handler to perform the magic. Remembering that we already checked the PCI device breaks the redirect loop. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190130155733.32742-5-david@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-01-18s390x/pci: add common function measurement blockYi Min Zhao4-4/+163
Common function measurement block is used to report zPCI internal counters of successful pcilg/stg/stb and rpcit instructions to a memory location provided by the program. This patch introduces a new ZpciFmb structure and schedules a timer callback to copy the zPCI measures to the FMB in the guest memory at an interval time set to 4s. An error while attemping to update the FMB, would generate an error event to the guest. The pcilg/stg/stb and rpcit interception handlers increase the related counter on a successful call. The guest shall pass a null FMBA (FMB address) in the FIB (Function Information Block) when it issues a Modify PCI Function Control instruction to switch off FMB and stop the corresponding timer. Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <1546969050-8884-2-git-send-email-pmorel@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-01-18s390x/pci: Ignore the unplug call if we already have a release_timerDavid Hildenbrand1-0/+3
... otherwise two successive calls to qdev_unplug() (e.g. by an impatient user) will effectively overwrite pbdev->release_timer, resulting in a memory leak. We are already processing the unplug. If there is already a release_timer, the unplug will be performed after the timeout. Can be easily triggered by (hmp) device_add virtio-mouse-pci,id=test (hmp) stop (hmp) device_del test (hmp) device_del test Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190114103110.10909-5-david@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-01-18s390x/pci: Always delete and free the release_timerDavid Hildenbrand1-1/+1
We should always get rid of it. I don't see a reason to keep the timer alive if the devices are going away. This looks like a memory leak. (hmp) device_add virtio-mouse-pci,id=test (hmp) device_del test -> guest notified, timer pending. -> guest does not react for some reason (e.g. crash) -> s390_pcihost_timer_cb(). Timer not pending anymore. qmp_unplug(). -> Device deleted. Timer expired (not pending) but not freed. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190114103110.10909-4-david@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-01-18s390x/pci: Move some hotplug checks to the pre_plug handlerDavid Hildenbrand1-16/+25
Let's move most of the checks to the new pre_plug handler. As a PCI bridge is just a PCI device, we can simplify the code. Notes: We cannot yet move the MSIX check or device ID creation + zPCI device creation to the pre_plug handler as both parts are not fixed before actual device realization (and therefore after pre_plug and before plug). Once that part is factored out, we can move these parts to the pre_plug handler, too and therefore remove all possible errors from the plug handler. Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190114103110.10909-3-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-01-18s390x/pci: Use hotplug_dev instead of looking up the host bridgeDavid Hildenbrand1-2/+2
We directly have it in our hands. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190114103110.10909-2-david@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-01-18s390x/pci: Set the iommu region size mpcifc requestPierre Morel1-1/+1
The size of the accessible iommu memory region in the guest is given to the IOMMU by the guest through the mpcifc request specifying the PCI Base Address and the PCI Address Limit. Let's set the size of the IOMMU region to: (PCI Address Limit) - (PCI Base Address) + 1. Fixes: f7c40aa1e7 ("s390x/pci: fix failures of dma map/unmap") Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <1547125207-16907-2-git-send-email-pmorel@linux.ibm.com> Acked-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-01-18s390x/pci: Send correct event on hotplugDavid Hildenbrand1-1/+1
Comit 2c28c490571f ("s390x/pci: let pci devices start in configured mode") changed the initial state of zPCI devices from ZPCI_FS_STANDBY to ZPCI_FS_DISABLED (a.k.a. configured). However we still only send a HP_EVENT_RESERVED_TO_STANDBY event to the guest, indicating a wrong state. Let's send a HP_EVENT_TO_CONFIGURED event instead, to match the actual state the device is in. This fixes hotplugged devices having to be enabled explicitly in the guest e.g. via echo 1 > /sys/bus/pci/slots/00000000/power. On real HW, a PCI device always pops up in the STANDBY state. In QEMU, we decided to let it show up directly in the configured state (as configuring it is otherwise just an extra burden for the admin). We can safely bypass the STANDBY state when hotplugging PCI devices to a guest. Fixes: 2c28c490571f ("s390x/pci: let pci devices start in configured mode") Reported-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190110210358.24035-1-david@redhat.com> Tested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-01-18s390: avoid potential null dereference in s390_pcihost_unplug()Li Qiang1-0/+4
When getting the 'pbdev', the if...else has no default branch. From Coverity, the 'pbdev' maybe null when the 'dev' is not the TYPE_PCI_BRIDGE/TYPE_PCI_DEVICE/TYPE_S390_PCI_DEVICE. This patch adds a default branch for device plug and unplug. Spotted by Coverity: CID 1398593 Signed-off-by: Li Qiang <liq3ea@163.com> Message-Id: <20190108151114.33140-1-liq3ea@163.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
generated by cgit v1.1 at 2024-12-28 20:43:28 +0000