aboutsummaryrefslogtreecommitdiff
path: root/hw/rtl8139.c
AgeCommit message (Collapse)AuthorFilesLines
2012-05-08rtl8139: fix regression in TxStatus/TxAddr readAvi Kivity1-1/+1
Commit afe0a595356192 added byte reads for TxStatus/TxAddr, but broke 32-bit reads; the mask generation (1 << (8 * size)) - 1 is unspecified in C for size >= sizeof(int), and in fact returns 0 on x86. Fix by using a larger type. Fixes (at least) Fedora 9 i386 with -machine kernel_irqchip=on. I didn't see it with the qemu APIC implementation; may be due to timing or (more likely) a tester error. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-11rtl8139: do not assume TxStatus[] and TxAddr[] are adjacentStefan Hajnoczi1-11/+15
Commit afe0a595356192d5f79703cf6462fcc112df007c ("rtl8139: support byte read to TxStatus registers") reused rtl8139_TxStatus_read() for reading TxAddr registers. It relies on the fact that TxStatus[] and TxAddr[] are adjacent. This causes a gcc warning because the compiler can detect that array access is out-of-bounds: hw/rtl8139.c:2501:27: error: array subscript is above array bounds [-Werror=array-bounds] This patch refactors the function so that we don't rely on out-of-bounds accesses. Cc: Jason Wang <jasonwang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-16rtl8139: do the network/host communication only in normal operating modeJason Wang1-0/+9
According the spec, the card works in network/host communication mode only when both EEM1 and EEM0 are unset in 93C46 Command Register (normal op mode). So this patch check these bits before trying to receive packets. As some guest driver (such as linux, see cp_init_hw() in 8139cp.c) allocate rx ring after the recevier were enabled, this would cause our emulation codes tries to dma into guest memory when the rx descriptor is not properly configured. This patch fixes this. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-03-16rtl8139: correctly check the opmodeJason Wang1-3/+5
According to the spec, only when opmode is "Config. Register Write Enable" could driver write to CONFIG0,1,3,4 and bits 13,12,8 of BMCR. Currently, we allow modifying to those registers also when 8139 is in "Auto-load" mode and "93C46 (93C56) Programming" mode. This patch fixes this. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-03-16net: move compute_mcast_idx() to net.hJason Wang1-24/+0
Reduce duplicated codes. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-03-16rtl8139: support byte read to TxStatus registersJason Wang1-4/+29
Some drivers (such as win7) use byte read for TxStatus registers, so we need to support this to let guest driver behave correctly. For writing, only double-word access is allowed by spec. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-03-16rtl8139: remove unused marcoJason Wang1-3/+0
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-03-16rtl8139: limit transmission buffer size in c+ modeJason Wang1-6/+5
The tx buffer would be re-allocated for tx descriptor with big size and without LS bit set, this would make guest driver could easily let qemu to allocate unlimited. In linux host, a glib failure were easy to be triggered: GLib-ERROR **: gmem.c:176: failed to allocate 18446744071562067968 bytes This patch fix this by adding a limit. As the spec didn't tell the maximum size of buffer allowed, stick it to current CP_TX_BUFFER_SIZE (65536). Changes from V1: Drop the while statement and s->cplus_txbuffer check. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-02-15qom: Unify type registrationAndreas Färber1-2/+2
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: register all types natively through QEMU Object ModelAnthony Liguori1-8/+10
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27pci: convert to QEMU Object ModelAnthony Liguori1-16/+25
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27qdev: don't access name through infoAnthony Liguori1-1/+1
We already have a QOM interface for this so let's use it. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27qdev: move qdev->info to classAnthony Liguori1-1/+1
Right now, DeviceInfo acts as the class for qdev. In order to switch to a proper ObjectClass derivative, we need to ween all of the callers off of interacting directly with the info pointer. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-14Merge remote-tracking branch 'stefanha/trivial-patches-next' into stagingAnthony Liguori1-1/+1
2011-12-14hw: Fix spelling in commentsStefan Weil1-1/+1
adress->address advertisment->advertisement begining->beginning bondary->boundary controler->controller controll->control convertion->conversion doesnt->doesn't existant->existent instuction->instruction loosing->losing managment->management multipled->multiplied negotation->negotiation runing->running teh->the unchangable->unchangeable writen->written yeild->yield Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-12Remove unnecessary casts from PCI DMA code in rtl8139David Gibson1-4/+4
This patch removes some unnecessary casts in the rtl8139 device, introduced by commit 3ada003aee2004d24f23b9cd6f4eda87d9601ddb 'rtl8139: Use PCI DMA stub functions'. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-23rtl8139: Fix invalid IO access alignmentJulian Pidancet1-13/+1
This patch makes iPXE work with the rtl8139 emulation. The rtl8139 driver in iPXE issues a 16bit access on the ChipCmd register (offset 0x37) to check the status of the rx buffer. The offset of the ioport access was getting fixed up to 0x36 in qemu, causing the value read in iPXE to be invalid. This fixes an issue with iPXE reporting timeouts during TFTP transfers. Reposting this here because it is trivial enough and the original post on qemu-devel didn't attract much attention. Also, the inw() which was causing the issue has been replaced with an inb() in upstream iPXE: https://git.ipxe.org/ipxe.git/commit/91dd64ad25baa27954a7518e73df4fca8a2d0c93 Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-01rtl8139: Use PCI DMA stub functionsEduard - Gabriel Munteanu1-52/+54
This updates the rtl8139 device emulation to use the explicit PCI DMA functions, instead of directly calling physical memory access functions. Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-19pci: interrupt pin documentation updateMichael S. Tsirkin1-1/+1
Fix up some erroneous comments in code: interrupt pins are named A-D, the interrupt pin register is always readonly and isn't zeroed out on reset. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori1-6/+6
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08pci: rename pci_register_bar_region() to pci_register_bar()Avi Kivity1-4/+2
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08rtl8139: convert to memory APIAvi Kivity1-34/+38
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-15Merge remote-tracking branch 'origin/master' into pciMichael S. Tsirkin1-20/+24
Conflicts: hw/virtio-pci.c
2011-06-12hw/rtl8139.c: convert to PCIDeviceInfo to initialize idsIsaku Yamahata1-4/+4
use PCIDeviceInfo to initialize ids. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-06Fix typo in code and commentsStefan Weil1-20/+24
Replace writeable -> writable Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-05-05Merge remote branch 'origin/master' into pciMichael S. Tsirkin1-203/+237
Conflicts: exec.c
2011-04-27rtl8139: Fix compilation for w32/w64Stefan Weil1-2/+1
Compilation for Windows needs a different declaration for the printf format attribute, so use the macro which was defined for this purpose. Cc: Benjamin Poirier <benjamin.poirier@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25rtl8139: add format attribute to DPRINTFBenjamin Poirier1-3/+6
gcc can check the format string for correctness even when debugging output is not enabled. Have to make sure arguments are always available. They are optimized out if unneeded. Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25rtl8139: use variadic macro for debug statementsBenjamin Poirier1-203/+232
Removes double (( )) to make DEBUG_PRINT compatible with real function calls. Change the name to DPRINTF to be consistent with other DPRINTF macros throughout qemu. Include the "RTL8139: " prefix in the macro. This changes some debug output slightly since the prefix wasn't present on all lines. Part of the change was done using the "coccinelle" tool with the following small semantic match: @@ expression E; @@ - DEBUG_PRINT((E)) + DPRINTF(E) Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-25rtl8139: use TARGET_FMT_plx in debug messagesBenjamin Poirier1-6/+9
Prevents a compilation failure when DEBUG_RTL8139 is defined: CC libhw32/rtl8139.o cc1: warnings being treated as errors hw/rtl8139.c: In function ‘rtl8139_cplus_transmit_one’: hw/rtl8139.c:1960: error: format ‘%8lx’ expects type ‘long unsigned int’, but argument 5 has type ‘target_phys_addr_t’ make[1]: *** [rtl8139.o] Error 1 Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-18PXE: Use consistent naming for PXE ROMsAlex Williamson1-1/+1
And add missing ROMs to tarbin build target. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2011-04-07rtl8139: convert to pci_register_bar_simple()Avi Kivity1-10/+1
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-26rtl8139: add vlan tag insertionBenjamin Poirier1-15/+60
Add support to the emulated hardware to insert vlan tags in packets going from the guest to the network. Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-26rtl8139: add vlan tag extractionBenjamin Poirier1-14/+52
Add support to the emulated hardware to extract vlan tags in packets going from the network to the guest. Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> -- AFAIK, extraction is optional to get vlans working. The driver requests rx detagging but should not assume that it was done. Under Linux, the mac layer will catch the vlan ethertype. I only added this part for completeness (to emulate the hardware more truthfully...) Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-26rtl8139: cleanup FCS calculationBenjamin Poirier1-17/+3
clean out ifdef's around ethernet checksum calculation Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Acked-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-21change all other clock references to use nanosecond resolution accessorsPaolo Bonzini1-11/+11
This was done with: sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \ $(git grep -l 'qemu_get_clock\>' ) sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \ $(git grep -l 'qemu_new_timer\>' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. There was exactly one false positive in qemu_run_timers: - current_time = qemu_get_clock (clock); + current_time = qemu_get_clock_ns (clock); which is of course not in this patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-03-13moving eeprom initializationWilliam Dauchy1-12/+11
The initialization should not be only on reset but also when initializing the device. It resolves a bug when hot plugging a pci network device: the mac address was always null. Signed-off-by: William Dauchy <wdauchy@gmail.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-05rtl8139: Use subsection to restrict migration after hotplugAlex Williamson1-1/+27
rtl8139 includes a cpu_register_io_memory acquired value in it's migration data. This is not only unecessary, but we should treat these values as unique to the VM instances since the value depends on call order. In most cases, this miraculously still works. However, if devices are added or removed from the system, it may represent an ordering change, which could cause the target rtl8139 device to make use of another device's cpu_register_io_memory value. If we detect that a hot-add/remove has occured, include a subsection to restrict migrations only to driver versions known to include this fix. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-11Add bootindex parameter to net/block/fd deviceGleb Natapov1-0/+4
If bootindex is specified on command line a string that describes device in firmware readable way is added into sorted list. Later this list will be passed into firmware to control boot order. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11rtl8139: Declare as little endianAlexander Graf1-13/+1
This patch replaces explicit bswaps with endianness hints to the mmio layer. Because we don't depend on the target endianness anymore, we can also move the driver over to Makefile.objs. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add endianness as io mem parameterAlexander Graf1-1/+2
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11rtl8139: address TODOsMichael S. Tsirkin1-3/+0
Make rtl8139 spec compliant, fixing reset values for command register. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-11pci: don't overwrite multi functio bit in pci header type.Isaku Yamahata1-1/+0
Don't overwrite pci header type. Otherwise, multi function bit which pci_init_header_type() sets appropriately is lost. Anyway PCI_HEADER_TYPE_NORMAL is zero, so it is unnecessary to zero which is already zero cleared. how to test: run qemu and issue info pci to see whether a device in question is normal device, not pci-to-pci bridge. This is handy because guest os isn't required. tested changes: The following files are covered by using following commands. sparc64-softmmu apb_pci.c, vga-pci.c, cmd646.c, ne2k_pci.c, sun4u.c ppc-softmmu grackle_pci.c, cmd646.c, ne2k_pci.c, vga-pci.c, macio.c ppc-softmmu -M mac99 unin_pci.c(uni-north, uni-north-agp) ppc64-softmmu pci-ohci, ne2k_pci, vga-pci, unin_pci.c(u3-agp) x86_64-softmmu acpi_piix4.c, ide/piix.c, piix_pci.c -vga vmware vmware_vga.c -watchdog i6300esb wdt_i6300esb.c -usb usb-uhci.c -sound ac97 ac97.c -nic model=rtl8139 rtl8139.c -nic model=pcnet pcnet.c -balloon virtio virtio-pci.c: untested changes: The following changes aren't tested. prep_pci.c: ppc-softmmu -M prep should cover, but core dumped. unin_pci.c(uni-north-pci): the caller is commented out. openpic.c: the caller is commented out in ppc_prep.c Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-23rewrote timer implementation for rtl8139.Frediano Ziglio1-55/+84
Add a QEMU timer only when needed (timeout status not set, timeout irq wanted and timer set). This patch is required for Darwin. Patch has been tested under FreeBSD, Darwin and Linux. Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-19rtl8139: fix clang reporting unused assignment of VLAN tagging dataIgor V. Kovalenko1-0/+5
Currently we do not implement VLAN tagging for rtl8139(C+), still data is read from ring buffer headers. - augment unused assignment with TODO item - cast txdw1 to void for now Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-23rtl: switch to symbolic names for pci registersMichael S. Tsirkin1-6/+10
No functional changes. I verified that the generated binary does not change. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Acked-by: Glauber Costa <glommer@gmail.com>
2009-12-18pci romfiles: add property, add default to PCIDeviceInfoGerd Hoffmann1-8/+1
This patch adds a romfile property to the pci bus. It allows to specify a romfile to load into the rom bar of the pci device. The default value comes from a new field in PCIDeviceInfo. The property allows to change the file and also to disable the rom loading using an empty string. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Support PCI based option rom loadingAnthony Liguori1-1/+1
Currently, we preload option roms into the option rom space in memory. This prevents DDIM from functioning correctly which severely limits the number of roms we can support. This patch introduces a pci_add_option_rom() which registers the PCI_ROM_ADDRESS bar which points to our option rom. It also converts over the cirrus vga adapter, the rtl8139, virtio, and the e1000 to use this new mechanism. The result is that PXE boot functions even with three unique types of cards. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03savevm: Port to qdev.vmsd all devices that have qdevJuan Quintela1-3/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: convert rtl8139 to NICStateMark McLoughlin1-19/+24
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-11-02 17:20:25 +0000