aboutsummaryrefslogtreecommitdiff
path: root/hw/riscv
AgeCommit message (Collapse)AuthorFilesLines
2023-09-29hw/riscv: opentitan: Fixup local variables shadowingAlistair Francis1-1/+1
Local variables shadowing other local variables or parameters make the code needlessly hard to understand. Bugs love to hide in such code. Evidence: "[PATCH v3 1/7] migration/rdma: Fix save_page method to fail on polling error". This patch removes the local variable shadowing. Tested by adding: --extra-cflags='-Wshadow=local -Wno-error=shadow=local -Wno-error=shadow=compatible-local' To configure Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20230925043023.71448-2-alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2023-09-11hw/riscv/virt.c: fix non-KVM --enable-debug buildDaniel Henrique Barboza1-3/+3
A build with --enable-debug and without KVM will fail as follows: /usr/bin/ld: libqemu-riscv64-softmmu.fa.p/hw_riscv_virt.c.o: in function `virt_machine_init': ./qemu/build/../hw/riscv/virt.c:1465: undefined reference to `kvm_riscv_aia_create' This happens because the code block with "if virt_use_kvm_aia(s)" isn't being ignored by the debug build, resulting in an undefined reference to a KVM only function. Add a 'kvm_enabled()' conditional together with virt_use_kvm_aia() will make the compiler crop the kvm_riscv_aia_create() call entirely from a non-KVM build. Note that adding the 'kvm_enabled()' conditional inside virt_use_kvm_aia() won't fix the build because this function would need to be inlined multiple times to make the compiler zero out the entire block. While we're at it, use kvm_enabled() in all instances where virt_use_kvm_aia() is checked to allow the compiler to elide these other kvm-only instances as well. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Fixes: dbdb99948e ("target/riscv: select KVM AIA in riscv virt machine") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20230830133503.711138-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-09-11hw/riscv: virt: Fix riscv,pmu DT node pathConor Dooley1-1/+1
On a dtb dumped from the virt machine, dt-validate complains: soc: pmu: {'riscv,event-to-mhpmcounters': [[1, 1, 524281], [2, 2, 524284], [65561, 65561, 524280], [65563, 65563, 524280], [65569, 65569, 524280]], 'compatible': ['riscv,pmu']} should not be valid under {'type': 'object'} from schema $id: http://devicetree.org/schemas/simple-bus.yaml# That's pretty cryptic, but running the dtb back through dtc produces something a lot more reasonable: Warning (simple_bus_reg): /soc/pmu: missing or empty reg/ranges property Moving the riscv,pmu node out of the soc bus solves the problem. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20230727-groom-decline-2c57ce42841c@spud> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-09-11target/riscv: select KVM AIA in riscv virt machineYong-Xuan Wang1-31/+63
Select KVM AIA when the host kernel has in-kernel AIA chip support. Since KVM AIA only has one APLIC instance, we map the QEMU APLIC devices to KVM APLIC. Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20230727102439.22554-6-yongxuan.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-09-11target/riscv: support the AIA device emulation with KVM enabledYong-Xuan Wang1-153/+137
In this patch, we create the APLIC and IMSIC FDT helper functions and remove M mode AIA devices when using KVM acceleration. Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20230727102439.22554-2-yongxuan.wang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-09-08riscv: spelling fixesMichael Tokarev2-3/+3
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Acked-by: Alistair Francis <alistair.francis@wdc.com>
2023-09-01hw/sd: Introduce a "sd-card" SPI variant modelCédric Le Goater1-2/+1
and replace the SDState::spi attribute with a test checking the SDProto array of commands. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2023-08-11hw/riscv/virt.c: change 'aclint' TCG checkDaniel Henrique Barboza1-7/+13
The 'aclint' property is being conditioned with tcg acceleration in virt_machine_class_init(). But acceleration code starts later than the class init of the board, meaning that tcg_enabled() will be always be false during class_init(), and the option is never being declared even when declaring TCG accel: $ ./build/qemu-system-riscv64 -M virt,accel=tcg,aclint=on qemu-system-riscv64: Property 'virt-machine.aclint' not found Fix it by moving the check from class_init() to machine_init(). Tune the description to mention that the option is TCG only. Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Fixes: c0716c81b ("hw/riscv/virt: Restrict ACLINT to TCG") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1823 Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20230811160224.440697-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-19hw/riscv: Fix typo field in error_reportZhao Liu1-2/+2
"smp.cpus" means the number of online CPUs and "smp.max_cpus" means the total number of CPUs. riscv_numa_get_default_cpu_node_id() checks "smp.cpus" and the "available CPUs" description in the next error message also indicates online CPUs. So report "smp.cpus" in error_report() instand of "smp.max_cpus". Since "smp.cpus" is "unsigned int", use "%u". Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230718080712.503333-1-zhao1.liu@linux.intel.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-10hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not setDaniel Henrique Barboza1-7/+7
The absence of a satp mode in riscv_host_cpu_init() is causing the following error: $ ./qemu/build/qemu-system-riscv64 -machine virt,accel=kvm \ -m 2G -smp 1 -nographic -snapshot \ -kernel ./guest_imgs/Image \ -initrd ./guest_imgs/rootfs_kvm_riscv64.img \ -append "earlycon=sbi root=/dev/ram rw" \ -cpu host ** ERROR:../target/riscv/cpu.c:320:satp_mode_str: code should not be reached Bail out! ERROR:../target/riscv/cpu.c:320:satp_mode_str: code should not be reached Aborted The error is triggered from create_fdt_socket_cpus() in hw/riscv/virt.c. It's trying to get satp_mode_str for a NULL cpu->cfg.satp_mode.map. For this KVM cpu we would need to inherit the satp supported modes from the RISC-V host. At this moment this is not possible because the KVM driver does not support it. And even when it does we can't just let this broken for every other older kernel. Since mmu-type is not a required node, according to [1], skip the 'mmu-type' FDT node if there's no satp_mode set. We'll revisit this logic when we can get satp information from KVM. [1] https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/riscv/cpus.yaml Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230706101738.460804-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-10hw/riscv: virt: Convert fdt_load_addr to uint64_tLakshmi Bai Raja Subramanian1-1/+1
fdt_load_addr was previously declared as uint32_t which doe not match with the return type of riscv_compute_fdt_addr(). This patch modifies the fdt_load_addr type from a uint32_t to a uint64_t to match the riscv_compute_fdt_addr() return type. This fixes calculating the fdt address when DRAM is mapped to higher 64-bit address. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Lakshmi Bai Raja Subramanian <lakshmi.bai.rajasubramanian@bodhicomputing.com> [ Change by AF: - Cleanup commit title and message ] Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <168872495192.6334.3845988291412774261-1@git.sr.ht> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-10riscv: Generate devicetree only after machine initialization is completeGuenter Roeck1-11/+11
If the devicetree is created before machine initialization is complete, it misses dynamic devices. Specifically, the tpm device is not added to the devicetree file and is therefore not instantiated in Linux. Load/create devicetree in virt_machine_done() to solve the problem. Cc: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Cc: Alistair Francis <alistair23@gmail.com> Cc: Daniel Henrique Barboza <dbarboza@ventanamicro.c> Fixes: 325b7c4e75 hw/riscv: Enable TPM backends Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230706035937.1870483-1-linux@roeck-us.net> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-10hw/riscv/virt: Restrict ACLINT to TCGPhilippe Mathieu-Daudé1-8/+10
The Advanced Core Local Interruptor (ACLINT) device can only be used with TCG. Check for TCG enabled instead of KVM being not. Only add the property when TCG is used. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230629121103.87733-3-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-10hw/riscv: sifive_e: Support the watchdog timer of HiFive 1 rev b.Tommy Wu2-2/+16
Create the AON device when we realize the sifive_e machine. This patch only implemented the functionality of the watchdog timer, not all the functionality of the AON device. Signed-off-by: Tommy Wu <tommy.wu@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230627141216.3962299-3-tommy.wu@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-07-08hw/riscv/virt.c: fix typo in 'aia' descriptionDaniel Henrique Barboza1-1/+1
Cc: qemu-trivial@nongnu.org Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-06-26hw/riscv: Validate cluster and NUMA node boundaryGavin Shan2-0/+4
There are two RISCV machines where NUMA is aware: 'virt' and 'spike'. Both of them are required to follow cluster-NUMA-node boundary. To enable the validation to warn about the irregular configuration where multiple CPUs in one cluster has been associated with multiple NUMA nodes. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230509002739.18388-4-gshan@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-06-13riscv/virt: Support using pflash via -blockdev optionSunil V L1-3/+5
Currently, pflash devices can be configured only via -pflash or -drive options. This is the legacy way and the better way is to use -blockdev as in other architectures. libvirt also has moved to use -blockdev method. To support -blockdev option, pflash devices need to be created in instance_init itself. So, update the code to move the virt_flash_create() to instance_init. Also, use standard interfaces to detect whether pflash0 is configured or not. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reported-by: Andrea Bolognani <abologna@redhat.com> Tested-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230601045910.18646-3-sunilvl@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13hw/riscv: virt: Assume M-mode FW in pflash0 only when "-bios none"Sunil V L1-32/+21
Currently, virt machine supports two pflash instances each with 32MB size. However, the first pflash is always assumed to contain M-mode firmware and reset vector is set to this if enabled. Hence, for S-mode payloads like EDK2, only one pflash instance is available for use. This means both code and NV variables of EDK2 will need to use the same pflash. The OS distros keep the EDK2 FW code as readonly. When non-volatile variables also need to share the same pflash, it is not possible to keep it as readonly since variables need write access. To resolve this issue, the code and NV variables need to be separated. But in that case we need an extra flash. Hence, modify the convention for non-KVM guests such that, pflash0 will contain the M-mode FW only when "-bios none" option is used. Otherwise, pflash0 will contain the S-mode payload FW. This enables both pflash instances available for EDK2 use. When KVM is enabled, pflash0 is always assumed to contain the S-mode payload firmware only. Example usage: 1) pflash0 containing M-mode FW qemu-system-riscv64 -bios none -pflash <mmode_fw> -machine virt or qemu-system-riscv64 -bios none \ -drive file=<mmode_fw>,if=pflash,format=raw,unit=0 -machine virt 2) pflash0 containing S-mode payload like EDK2 qemu-system-riscv64 -pflash <smode_fw_code> -pflash <smode_vars> -machine virt or qemu-system-riscv64 -bios <opensbi_fw> \ -pflash <smode_fw_code> \ -pflash <smode_vars> \ -machine virt or qemu-system-riscv64 -bios <opensbi_fw> \ -drive file=<smode_fw_code>,if=pflash,format=raw,unit=0,readonly=on \ -drive file=<smode_fw_vars>,if=pflash,format=raw,unit=1 \ -machine virt Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230601045910.18646-2-sunilvl@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13hw/riscv: qemu crash when NUMA nodes exceed available CPUsYin Wang1-0/+6
Command "qemu-system-riscv64 -machine virt -m 2G -smp 1 -numa node,mem=1G -numa node,mem=1G" would trigger this problem.Backtrace with: #0 0x0000555555b5b1a4 in riscv_numa_get_default_cpu_node_id at ../hw/riscv/numa.c:211 #1 0x00005555558ce510 in machine_numa_finish_cpu_init at ../hw/core/machine.c:1230 #2 0x00005555558ce9d3 in machine_run_board_init at ../hw/core/machine.c:1346 #3 0x0000555555aaedc3 in qemu_init_board at ../softmmu/vl.c:2513 #4 0x0000555555aaf064 in qmp_x_exit_preconfig at ../softmmu/vl.c:2609 #5 0x0000555555ab1916 in qemu_init at ../softmmu/vl.c:3617 #6 0x000055555585463b in main at ../softmmu/main.c:47 This commit fixes the issue by adding parameter checks. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Yin Wang <yin.wang@intel.com> Message-Id: <20230519023758.1759434-1-yin.wang@intel.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13hw/riscv/opentitan: Correct OpenTitanState parent type/sizePhilippe Mathieu-Daudé1-1/+2
OpenTitanState is the 'machine' (or 'board') state: it isn't a SysBus device, but inherits from the MachineState type. Correct the instance size. Doing so we avoid leaking an OpenTitanState pointer in opentitan_machine_init(). Fixes: fe0fe4735e ("riscv: Initial commit of OpenTitan machine") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230520054510.68822-6-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13hw/riscv/opentitan: Explicit machine type definitionPhilippe Mathieu-Daudé1-3/+7
Expand the DEFINE_MACHINE() macro, converting the class_init() handler. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230520054510.68822-5-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13hw/riscv/opentitan: Add TYPE_OPENTITAN_MACHINE definitionPhilippe Mathieu-Daudé1-1/+1
QOM type names are usually defined as TYPE_FOO. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230520054510.68822-4-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13hw/riscv/opentitan: Declare QOM types using DEFINE_TYPES() macroPhilippe Mathieu-Daudé1-12/+9
When multiple QOM types are registered in the same file, it is simpler to use the the DEFINE_TYPES() macro. Replace the type_init() / type_register_static() combination. This is in preparation of adding the OpenTitan machine type to this array in a pair of commits. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230520054510.68822-3-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-13hw/riscv/opentitan: Rename machine_[class]_init() functionsPhilippe Mathieu-Daudé1-4/+4
Follow QOM style which declares FOO_init() as instance initializer and FOO_class_init() as class initializer: rename the OpenTitan machine class/instance init() accordingly. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230520054510.68822-2-philmd@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-05bulk: Remove pointless QOM castsPhilippe Mathieu-Daudé1-5/+5
Mechanical change running Coccinelle spatch with content generated from the qom-cast-macro-clean-cocci-gen.py added in the previous commit. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230601093452.38972-3-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-05hw/riscv: Add signature dump function for spike to run ACT testsWeiwei Li1-0/+13
Add signature and signature-granularity properties in spike to specify the target signatrue file and the line size for signature data. Recgonize the signature section between begin_signature and end_signature symbols when loading elf of ACT tests. Then dump signature data in signature section just before the ACT tests exit. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230405095720.75848-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-03-22*: Add missing includes of qemu/error-report.hRichard Henderson3-0/+3
This had been pulled in via qemu/plugin.h from hw/core/cpu.h, but that will be removed. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org> [AJB: add various additional cases shown by CI] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org> Reviewed-by: Emilio Cota <cota@braap.org>
2023-03-06hw/riscv/virt.c: Initialize the ACPI tablesSunil V L1-0/+4
Initialize the ACPI tables if the acpi option is not disabled. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20230302091212.999767-8-sunilvl@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-06hw/riscv/virt: virt-acpi-build.c: Add RHCT TableSunil V L1-0/+78
RISC-V ACPI platforms need to provide RISC-V Hart Capabilities Table (RHCT). Add this to the ACPI tables. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20230302091212.999767-7-sunilvl@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-06hw/riscv/virt: virt-acpi-build.c: Add RINTC in MADTSunil V L1-0/+34
Add Multiple APIC Description Table (MADT) with the RINTC structure for each cpu. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20230302091212.999767-6-sunilvl@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-06hw/riscv/virt: Enable basic ACPI infrastructureSunil V L3-0/+306
Add basic ACPI infrastructure for RISC-V with below tables. 1) DSDT with below basic objects - CPUs - fw_cfg 2) FADT revision 6 with HW_REDUCED flag 3) XSDT 4) RSDP Add this functionality in a new file virt-acpi-build.c and enable building this infrastructure. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20230302091212.999767-5-sunilvl@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-06hw/riscv/virt: Add memmap pointer to RiscVVirtStateSunil V L1-0/+2
memmap needs to be exported outside of virt.c so that modules like acpi can use it. Hence, add a pointer field in RiscVVirtState structure and initialize it with the memorymap. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20230302091212.999767-4-sunilvl@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-06hw/riscv/virt: Add a switch to disable ACPISunil V L1-0/+29
ACPI will be enabled by default. Add a switch to turn off for testing and debug purposes. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20230302091212.999767-3-sunilvl@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-06hw/riscv/virt: Add OEM_ID and OEM_TABLE_ID fieldsSunil V L1-0/+5
ACPI needs OEM_ID and OEM_TABLE_ID for the machine. Add these fields in the RISCVVirtState structure and initialize with default values. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Message-ID: <20230302091212.999767-2-sunilvl@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-06riscv: Correctly set the device-tree entry 'mmu-type'Alexandre Ghiti1-8/+11
The 'mmu-type' should reflect what the hardware is capable of so use the new satp_mode field in RISCVCPUConfig to do that. Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-ID: <20230303131252.892893-6-alexghiti@rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-05hw/riscv/virt.c: add cbo[mz]-block-size fdt propertiesAnup Patel1-0/+11
The cbom-block-size fdt property property is used to inform the OS about the blocksize in bytes for the Zicbom cache operations. Linux documents it in Documentation/devicetree/bindings/riscv/cpus.yaml as: riscv,cbom-block-size: $ref: /schemas/types.yaml#/definitions/uint32 description: The blocksize in bytes for the Zicbom cache operations. cboz-block-size has the same role but for the Zicboz extension, i.e. informs the size in bytes for Zicboz cache operations. Linux support for it is under review/approval in [1]. Patch 3 of that series describes cboz-block-size as: riscv,cboz-block-size: $ref: /schemas/types.yaml#/definitions/uint32 description: The blocksize in bytes for the Zicboz cache operations. [1] https://lore.kernel.org/all/20230224162631.405473-1-ajones@ventanamicro.com/ Cc: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Message-ID: <20230302091406.407824-2-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01hw/riscv: Move the dtb load bits outside of create_fdt()Bin Meng2-31/+29
Move the dtb load bits outside of create_fdt(), and put it explicitly in sifive_u_machine_init() and virt_machine_init(). With such change create_fdt() does exactly what its function name tells us. Suggested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20230228074522.1845007-2-bmeng@tinylab.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01hw/riscv: Skip re-generating DT nodes for a given DTBBin Meng2-0/+2
Launch qemu-system-riscv64 with a given dtb for 'sifive_u' and 'virt' machines, QEMU complains: qemu_fdt_add_subnode: Failed to create subnode /soc: FDT_ERR_EXISTS The whole DT generation logic should be skipped when a given DTB is present. Fixes: b1f19f238cae ("hw/riscv: write bootargs 'chosen' FDT after riscv_load_kernel()") Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20230228074522.1845007-1-bmeng@tinylab.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-03-01hw/riscv/virt.c: do not use RISCV_FEATURE_MMU in create_fdt_socket_cpus()Daniel Henrique Barboza1-3/+4
Read cpu_ptr->cfg.mmu directly. As a bonus, use cpu_ptr in riscv_isa_string(). Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-ID: <20230222185205.355361-9-dbarboza@ventanamicro.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-16hw/riscv/boot.c: make riscv_load_initrd() staticDaniel Henrique Barboza1-40/+40
The only remaining caller is riscv_load_kernel_and_initrd() which belongs to the same file. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230206140022.2748401-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-16hw/riscv/boot.c: consolidate all kernel init in riscv_load_kernel()Daniel Henrique Barboza7-42/+19
The microchip_icicle_kit, sifive_u, spike and virt boards are now doing the same steps when '-kernel' is used: - execute load_kernel() - load init_rd() - write kernel_cmdline Let's fold everything inside riscv_load_kernel() to avoid code repetition. To not change the behavior of boards that aren't calling riscv_load_init(), add an 'load_initrd' flag to riscv_load_kernel() and allow these boards to opt out from initrd loading. Cc: Palmer Dabbelt <palmer@dabbelt.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230206140022.2748401-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-16hw/riscv: handle 32 bit CPUs kernel_entry in riscv_load_kernel()Daniel Henrique Barboza7-9/+29
Next patch will move all calls to riscv_load_initrd() to riscv_load_kernel(). Machines that want to load initrd will be able to do via an extra flag to riscv_load_kernel(). This change will expose a sign-extend behavior that is happening in load_elf_ram_sym() when running 32 bit guests [1]. This is currently obscured by the fact that riscv_load_initrd() is using the return of riscv_load_kernel(), defined as target_ulong, and this return type will crop the higher 32 bits that would be padded with 1s by the sign extension when running in 32 bit targets. The changes to be done will force riscv_load_initrd() to use an uint64_t instead, exposing it to the padding when dealing with 32 bit CPUs. There is a discussion about whether load_elf_ram_sym() should or should not sign extend the value returned by 'lowaddr'. What we can do is to prevent the behavior change that the next patch will end up doing. riscv_load_initrd() wasn't dealing with 64 bit kernel entries when running 32 bit CPUs, and we want to keep it that way. One way of doing it is to use target_ulong in 'kernel_entry' in riscv_load_kernel() and rely on the fact that this var will not be sign extended for 32 bit targets. Another way is to explictly clear the higher 32 bits when running 32 bit CPUs for all possibilities of kernel_entry. We opted for the later. This will allow us to be clear about the design choices made in the function, while also allowing us to add a small comment about what load_elf_ram_sym() is doing. With this change, the consolation patch can do its job without worrying about unintended behavioral changes. [1] https://lists.gnu.org/archive/html/qemu-devel/2023-01/msg02281.html Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230206140022.2748401-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-07hw/riscv: virt: Simplify virt_{get,set}_aclint()Bin Meng1-4/+2
There is no need to declare an intermediate "MachineState *ms". Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230206085007.3618715-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07hw/riscv: change riscv_compute_fdt_addr() semanticsDaniel Henrique Barboza5-16/+31
As it is now, riscv_compute_fdt_addr() is receiving a dram_base, a mem_size (which is defaulted to MachineState::ram_size in all boards) and the FDT pointer. And it makes a very important assumption: the DRAM interval dram_base + mem_size is contiguous. This is indeed the case for most boards that use a FDT. The Icicle Kit board works with 2 distinct RAM banks that are separated by a gap. We have a lower bank with 1GiB size, a gap follows, then at 64GiB the high memory starts. MachineClass::default_ram_size for this board is set to 1.5Gb, and machine_init() is enforcing it as minimal RAM size, meaning that there we'll always have at least 512 MiB in the Hi RAM area. Using riscv_compute_fdt_addr() in this board is weird because not only the board has sparse RAM, and it's calling it using the base address of the Lo RAM area, but it's also using a mem_size that we have guarantees that it will go up to the Hi RAM. All the function assumptions doesn't work for this board. In fact, what makes the function works at all in this case is a coincidence. Commit 1a475d39ef54 introduced a 3GB boundary for the FDT, down from 4Gb, that is enforced if dram_base is lower than 3072 MiB. For the Icicle Kit board, memmap[MICROCHIP_PFSOC_DRAM_LO].base is 0x80000000 (2 Gb) and it has a 1Gb size, so it will fall in the conditions to put the FDT under a 3Gb address, which happens to be exactly at the end of DRAM_LO. If the base address of the Lo area started later than 3Gb this function would be unusable by the board. Changing any assumptions inside riscv_compute_fdt_addr() can also break it by accident as well. Let's change riscv_compute_fdt_addr() semantics to be appropriate to the Icicle Kit board and for future boards that might have sparse RAM topologies to worry about: - relieve the condition that the dram_base + mem_size area is contiguous, since this is already not the case today; - receive an extra 'dram_size' size attribute that refers to a contiguous RAM block that the board wants the FDT to reside on. Together with 'mem_size' and 'fdt', which are now now being consumed by a MachineState pointer, we're able to make clear assumptions based on the DRAM block and total mem_size available to ensure that the FDT will be put in a valid RAM address. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230201171212.1219375-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07hw/riscv: split fdt address calculation from fdt loadDaniel Henrique Barboza5-16/+40
A common trend in other archs is to calculate the fdt address, which is usually straightforward, and then calling a function that loads the fdt/dtb by using that address. riscv_load_fdt() is doing a bit too much in comparison. It's calculating the fdt address via an elaborated heuristic to put the FDT at the bottom of DRAM, and "bottom of DRAM" will vary across boards and configurations, then it's actually loading the fdt, and finally it's returning the fdt address used to the caller. Reduce the existing complexity of riscv_load_fdt() by splitting its code into a new function, riscv_compute_fdt_addr(), that will take care of all fdt address logic. riscv_load_fdt() can then be a simple function that just loads a fdt at the given fdt address. We're also taken the opportunity to clarify the intentions and assumptions made by these functions. riscv_load_fdt() is now receiving a hwaddr as fdt_addr because there is no restriction of having to load the fdt in higher addresses that doesn't fit in an uint32_t. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230201171212.1219375-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07hw/riscv/boot.c: calculate fdt size after fdt_pack()Daniel Henrique Barboza1-4/+6
fdt_pack() can change the fdt size, meaning that fdt_totalsize() can contain a now deprecated (bigger) value. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230201171212.1219375-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07hw/riscv/spike.c: rename MachineState 'mc' pointers to' ms'Daniel Henrique Barboza1-9/+9
Follow the QEMU convention of naming MachineState pointers as 'ms' by renaming the instances where we're calling it 'mc'. Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230124212234.412630-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07hw/riscv/virt.c: rename MachineState 'mc' pointers to 'ms'Daniel Henrique Barboza1-217/+217
We have a convention in other QEMU boards/archs to name MachineState pointers as either 'machine' or 'ms'. MachineClass pointers are usually called 'mc'. The 'virt' RISC-V machine has a lot of instances where MachineState pointers are named 'mc'. There is nothing wrong with that, but we gain more compatibility with the rest of the QEMU code base, and easier reviews, if we follow QEMU conventions. Rename all 'mc' MachineState pointers to 'ms'. This is a very tedious and mechanical patch that was produced by doing the following: - find/replace all 'MachineState *mc' to 'MachineState *ms'; - find/replace all 'mc->fdt' to 'ms->fdt'; - find/replace all 'mc->smp.cpus' to 'ms->smp.cpus'; - replace any remaining occurrences of 'mc' that the compiler complained about. Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230124212234.412630-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07hw/riscv/virt.c: calculate socket count once in create_fdt_imsic()Daniel Henrique Barboza1-15/+19
riscv_socket_count() returns either ms->numa_state->num_nodes or 1 depending on NUMA support. In any case the value can be retrieved only once and used in the rest of the function. This will also alleviate the rename we're going to do next by reducing the instances of MachineState 'mc' inside hw/riscv/virt.c. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230124212234.412630-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07hw/riscv: boot: Don't use CSRs if they are disabledAlistair Francis1-0/+9
If the CSRs and CSR instructions are disabled because the Zicsr extension isn't enabled then we want to make sure we don't run any CSR instructions in the boot ROM. This patches removes the CSR instructions from the reset-vec if the extension isn't enabled. We replace the instruction with a NOP instead. Note that we don't do this for the SiFive U machine, as we are modelling the hardware in that case. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1447 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230123035754.75553-1-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
generated by cgit v1.1 at 2024-12-27 05:50:34 +0000