aboutsummaryrefslogtreecommitdiff
path: root/hw/riscv
AgeCommit message (Collapse)AuthorFilesLines
2020-03-03Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-5.0-sf3' ↵Peter Maydell5-7/+15
into staging RISC-V Patches for the 5.0 Soft Freeze, Part 3 This pull request is almost entirely an implementation of the draft hypervisor extension. This extension is still in draft and is expected to have incompatible changes before being frozen, but we've had good luck managing other RISC-V draft extensions in QEMU so far. Additionally, there's a fix to PCI addressing and some improvements to the M-mode timer. This boots linux and passes make check for me. # gpg: Signature made Tue 03 Mar 2020 00:23:20 GMT # gpg: using RSA key 2B3C3747446843B24A943A7A2E1319F35FBB1889 # gpg: issuer "palmer@dabbelt.com" # gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown] # gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown] # gpg: aka "Palmer Dabbelt <palmerdabbelt@google.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41 # Subkey fingerprint: 2B3C 3747 4468 43B2 4A94 3A7A 2E13 19F3 5FBB 1889 * remotes/palmer/tags/riscv-for-master-5.0-sf3: (38 commits) hw/riscv: Provide rdtime callback for TCG in CLINT emulation target/riscv: Emulate TIME CSRs for privileged mode riscv: virt: Allow PCI address 0 target/riscv: Allow enabling the Hypervisor extension target/riscv: Add the MSTATUS_MPV_ISSET helper macro target/riscv: Add support for the 32-bit MSTATUSH CSR target/riscv: Set htval and mtval2 on execptions target/riscv: Raise the new execptions when 2nd stage translation fails target/riscv: Implement second stage MMU target/riscv: Allow specifying MMU stage target/riscv: Respect MPRV and SPRV for floating point ops target/riscv: Mark both sstatus and msstatus_hs as dirty target/riscv: Disable guest FP support based on virtual status target/riscv: Only set TB flags with FP status if enabled target/riscv: Remove the hret instruction target/riscv: Add hfence instructions target/riscv: Add Hypervisor trap return support target/riscv: Add hypvervisor trap support target/riscv: Generate illegal instruction on WFI when V=1 target/ricsv: Flush the TLB on virtulisation mode changes ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-28hw: Make MachineClass::is_default a boolean typePhilippe Mathieu-Daudé1-1/+1
There's no good reason for it to be type int, change it to bool. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200207161948.15972-3-philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-02-27hw/riscv: Provide rdtime callback for TCG in CLINT emulationAnup Patel5-7/+14
This patch extends CLINT emulation to provide rdtime callback for TCG. This rdtime callback will be called wheneven TIME CSRs are read in privileged modes. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-27riscv: virt: Allow PCI address 0Bin Meng1-0/+1
When testing e1000 with the virt machine, e1000's I/O space cannot be accessed. Debugging shows that the I/O BAR (BAR1) is correctly written with address 0 plus I/O enable bit, but QEMU's "info pci" shows that: Bus 0, device 1, function 0: Ethernet controller: PCI device 8086:100e ... BAR1: I/O at 0xffffffffffffffff [0x003e]. ... It turns out we should set pci_allow_0_address to true to allow 0 PCI address, otherwise pci_bar_address() treats such address as PCI_BAR_UNMAPPED. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-10riscv: virt: Use Goldfish RTC deviceAnup Patel2-0/+17
We extend QEMU RISC-V virt machine by adding Goldfish RTC device to it. This will allow Guest Linux to sync it's local date/time with Host date/time via RTC device. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Palmer Dabbelt <palmer@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-02-10riscv/virt: Add syscon reboot and poweroff DT nodesAnup Patel1-4/+22
The SiFive test device found on virt machine can be used by generic syscon reboot and poweroff drivers available in Linux kernel. This patch updates FDT generation in virt machine so that Linux kernel can probe and use generic syscon drivers. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-29hw/core/loader: Let load_elf() populate a field with CPU-specific flagsAleksandar Markovic1-2/+2
While loading the executable, some platforms (like AVR) need to detect CPU type that executable is built for - and, with this patch, this is enabled by reading the field 'e_flags' of the ELF header of the executable in question. The change expands functionality of the following functions: - load_elf() - load_elf_as() - load_elf_ram() - load_elf_ram_sym() The argument added to these functions is called 'pflags' and is of type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word' being the type of the field 'e_flags', in both 32-bit and 64-bit variants of ELF header). Callers are allowed to pass NULL as that argument, and in such case no lookup to the field 'e_flags' will happen, and no information will be returned, of course. CC: Richard Henderson <rth@twiddle.net> CC: Peter Maydell <peter.maydell@linaro.org> CC: Edgar E. Iglesias <edgar.iglesias@gmail.com> CC: Michael Walle <michael@walle.cc> CC: Thomas Huth <huth@tuxfamily.org> CC: Laurent Vivier <laurent@vivier.eu> CC: Philippe Mathieu-Daudé <f4bug@amsat.org> CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> CC: Aurelien Jarno <aurelien@aurel32.net> CC: Jia Liu <proljc@gmail.com> CC: David Gibson <david@gibson.dropbear.id.au> CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: BALATON Zoltan <balaton@eik.bme.hu> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: Thomas Huth <thuth@redhat.com> CC: Artyom Tarasenko <atar4qemu@gmail.com> CC: Fabien Chouteau <chouteau@adacore.com> CC: KONRAD Frederic <frederic.konrad@adacore.com> CC: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
2020-01-27Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell4-4/+4
* Register qdev properties as class properties (Marc-André) * Cleanups (Philippe) * virtio-scsi fix (Pan Nengyuan) * Tweak Skylake-v3 model id (Kashyap) * x86 UCODE_REV support and nested live migration fix (myself) * Advisory mode for pvpanic (Zhenwei) # gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (58 commits) build-sys: clean up flags included in the linker command line target/i386: Add the 'model-id' for Skylake -v3 CPU models qdev: use object_property_help() qapi/qmp: add ObjectPropertyInfo.default-value qom: introduce object_property_help() qom: simplify qmp_device_list_properties() vl: print default value in object help qdev: register properties as class properties qdev: move instance properties to class properties qdev: rename DeviceClass.props qdev: set properties with device_class_set_props() object: return self in object_ref() object: release all props object: add object_class_property_add_link() object: express const link with link property object: add direct link flag object: rename link "child" to "target" object: check strong flag with & object: do not free class properties object: add object_property_set_default ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau4-4/+4
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-16riscv/sifive_u: fix a memory leak in soc_realize()Pan Nengyuan1-0/+1
Fix a minor memory leak in riscv_sifive_u_soc_realize() Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-01-08chardev: Use QEMUChrEvent enum in IOEventHandler typedefPhilippe Mathieu-Daudé2-2/+2
The Chardev events are listed in the QEMUChrEvent enum. By using the enum in the IOEventHandler typedef we: - make the IOEventHandler type more explicit (this handler process out-of-band information, while the IOReadHandler is in-band), - help static code analyzers. This patch was produced with the following spatch script: @match@ expression backend, opaque, context, set_open; identifier fd_can_read, fd_read, fd_event, be_change; @@ qemu_chr_fe_set_handlers(backend, fd_can_read, fd_read, fd_event, be_change, opaque, context, set_open); @depends on match@ identifier opaque, event; identifier match.fd_event; @@ static -void fd_event(void *opaque, int event) +void fd_event(void *opaque, QEMUChrEvent event) { ... } Then the typedef was modified manually in include/chardev/char-fe.h. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20191218172009.8868-15-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-25hw/riscv: Add optional symbol callback ptr to riscv_load_kernel()Zhuang, Siwei (Data61, Kensington NSW)5-9/+12
This patch adds an optional function pointer, "sym_cb", to riscv_load_kernel() which provides the possibility to access the symbol table during kernel loading. The pointer is ignored, if supplied with Image or uImage file. The Spike board requires the access to locate the HTIF symbols. Fixes: 0ac24d56c5e7 ("hw/riscv: Split out the boot functions") Buglink: https://bugs.launchpad.net/qemu/+bug/1835827 Signed-off-by: Siwei Zhuang <siwei.zhuang@data61.csiro.au> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-11-25RISC-V: virt: This is a "sifive,test1" test finisherPalmer Dabbelt1-1/+4
The test finisher implements the reset command, which means it's a "sifive,test1" device. This is a backwards compatible change, so it's also a "sifive,test0" device. I copied the odd idiom for adding a two-string compatible field from the ARM virt board. Fixes: 9a2551ed6f ("riscv: sifive_test: Add reset functionality") Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2019-11-14riscv/virt: Increase flash sizeAlistair Francis1-1/+1
Coreboot developers have requested that they have at least 32MB of flash to load binaries. We currently have 32MB of flash, but it is split in two to allow loading two flash binaries. Let's increase the flash size from 32MB to 64MB to ensure we have a single region that is 32MB. No QEMU release has include flash in the RISC-V virt machine, so this isn't a breaking change. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/boot: Fix possible memory leakAlistair Francis1-7/+4
Coverity (CID 1405786) thinks that there is a possible memory leak as we don't guarantee that the memory allocated from riscv_find_firmware() is freed. This is a false positive, but let's tidy up the code to fix the warning. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/virt: Jump to pflash if specifiedAlistair Francis1-1/+10
If the user supplied pflash to QEMU then change the reset code to jump to the pflash base address instead of the DRAM base address. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/virt: Add the PFlash CFI01 deviceAlistair Francis2-0/+87
Add the CFI01 PFlash to the RISC-V virt board. This is the same PFlash from the ARM Virt board and the implementation is based on the ARM Virt board. This allows users to specify flash files from the command line. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/virt: Manually define the machineAlistair Francis1-6/+24
Instead of using the DEFINE_MACHINE() macro to define the machine let's do it manually. This allows us to use the machine object to create RISCVVirtState. This is required to add children and aliases to the machine. This patch is no functional change. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/sifive_u: Add the start-in-flash propertyAlistair Francis1-1/+29
Add a property that when set to true QEMU will jump from the ROM code to the start of flash memory instead of DRAM which is the default behaviour. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/sifive_u: Manually define the machineAlistair Francis1-13/+31
Instead of using the DEFINE_MACHINE() macro to define the machine let's do it manually. This allows us to specify machine properties. This patch is no functional change. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/sifive_u: Add QSPI memory regionAlistair Francis1-0/+8
The HiFive Unleashed uses is25wp256 SPI NOR flash. There is currently no model of this in QEMU, so to allow boot firmware developers to use QEMU to target the Unleashed let's add a chunk of memory to represent the QSPI0 memory mapped flash. This can be targeted using QEMU's -device loader command line option. In the future we can look at adding a model for the is25wp256 flash. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv/sifive_u: Add L2-LIM cache memoryAlistair Francis1-0/+16
On reset only a single L2 cache way is enabled, the others are exposed as memory that can be used by early boot firmware. This L2 region is generally disabled using the WayEnable register at a later stage in the boot process. To allow firmware to target QEMU and the HiFive Unleashed let's add the L2 LIM (LooselyIntegrated Memory). Ideally we would want to adjust the size of this chunk of memory as the L2 Cache Controller WayEnable register is incremented. Unfortunately I don't see a nice way to handle reducing or blocking out the L2 LIM while still allowing it be re returned to all enabled from a reset. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv: sifive_u: Add ethernet0 to the aliases nodeBin Meng1-1/+4
U-Boot expects this alias to be in place in order to fix up the mac address of the ethernet node. This is to keep in sync with Linux kernel commit below: https://patchwork.kernel.org/patch/11133033/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-10-28riscv: hw: Drop "clock-frequency" property of cpu nodesBin Meng3-6/+0
The "clock-frequency" property of cpu nodes isn't required. Drop it. This is to keep in sync with Linux kernel commit below: https://patchwork.kernel.org/patch/11133031/ Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Update model and compatible strings in device treeBin Meng1-2/+3
This updates model and compatible strings to use the same strings as used in the Linux kernel device tree (hifive-unleashed-a00.dts). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernetBin Meng1-23/+1
In the past we did not have a model for PRCI, hence two handcrafted clock nodes ("/soc/ethclk" and "/soc/uartclk") were created for the purpose of supplying hard-coded clock frequencies. But now since we have added the PRCI support in QEMU, we don't need them any more. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Fix broken GEM supportBin Meng2-4/+21
At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Instantiate OTP memory with a serial numberBin Meng1-0/+9
This adds an OTP memory with a given serial number to the sifive_u machine. With such support, the upstream U-Boot for sifive_fu540 boots out of the box on the sifive_u machine. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive: Implement a model for SiFive FU540 OTPBin Meng2-0/+192
This implements a simple model for SiFive FU540 OTP (One-Time Programmable) Memory interface, primarily for reading out the stored serial number from the first 1 KiB of the 16 KiB OTP memory reserved by SiFive for internal use. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Change UART node name in device treeBin Meng1-1/+1
OpenSBI for fu540 does DT fix up (see fu540_modify_dt()) by updating chosen "stdout-path" to point to "/soc/serial@...", and U-Boot will use this information to locate the serial node and probe its driver. However currently we generate the UART node name as "/soc/uart@...", causing U-Boot fail to find the serial node in DT. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Update UART base addresses and IRQsBin Meng1-2/+2
This updates the UART base address and IRQs to match the hardware. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jonathan Behrens <fintelia@gmail.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodesBin Meng1-3/+4
Now that we have added a PRCI node, update existing UART and ethernet nodes to reference PRCI as their clock sources, to keep in sync with the Linux kernel device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Add PRCI block to the SoCBin Meng1-1/+23
Add PRCI mmio base address and size mappings to sifive_u machine, and generate the corresponding device tree node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Generate hfclk and rtcclk nodesBin Meng1-0/+23
To keep in sync with Linux kernel device tree, generate hfclk and rtcclk nodes in the device tree, to be referenced by PRCI node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive: Implement PRCI model for FU540Bin Meng2-0/+170
This adds a simple PRCI model for FU540 (sifive_u). It has different register layout from the existing PRCI model for FE310 (sifive_e). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Update PLIC hart topology configuration stringBin Meng1-3/+4
With heterogeneous harts config, the PLIC hart topology configuration string are "M,MS,.." because of the monitor hart #0. Suggested-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Update hart configuration to reflect the real FU540 SoCBin Meng1-25/+67
The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Set the minimum number of cpus to 2Bin Meng1-1/+4
It is not useful if we only have one management CPU. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> [Palmer: Set default CPUs to 2] Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hart: Add a "hartid-base" property to RISC-V hart arrayBin Meng1-1/+2
At present each hart's hartid in a RISC-V hart array is assigned the same value of its index in the hart array. But for a system that has multiple hart arrays, this is not the case any more. Add a new "hartid-base" property so that hartid number can be assigned based on the property value. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hart: Extract hart realize to a separate routineBin Meng1-13/+20
Currently riscv_harts_realize() creates all harts based on the same cpu type given in the hart array property. With current implementation it can only create homogeneous harts. Exact the hart realize to a separate routine in preparation for supporting multiple hart arrays. Note the file header says the RISC-V hart array holds the state of a heterogeneous array of RISC-V harts, which is not true. Update the comment to mention homogeneous array of RISC-V harts. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_e: Drop sifive_mmio_emulate()Bin Meng2-15/+9
Use create_unimplemented_device() instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_e: prci: Update the PRCI register block sizeBin Meng1-1/+1
Currently the PRCI register block size is set to 0x8000, but in fact 0x1000 is enough, which is also what the manual says. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_e: prci: Fix a typo of hfxosccfg register programmingBin Meng1-1/+1
For hfxosccfg register programming, SIFIVE_E_PRCI_HFXOSCCFG_RDY and SIFIVE_E_PRCI_HFXOSCCFG_EN should be used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive: Rename sifive_prci.{c, h} to sifive_e_prci.{c, h}Bin Meng3-43/+42
Current SiFive PRCI model only works with sifive_e machine, as it only emulates registers or PRCI block in the FE310 SoC. Rename the file name to make it clear that it is for sifive_e. This also prefix "sifive_e"/"SIFIVE_E" for all macros, variables and functions. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Remove the unnecessary include of prci headerBin Meng1-1/+0
sifive_u machine does not use PRCI as of today. Remove the prci header inclusion. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hw: Remove the unnecessary include of target/riscv/cpu.hBin Meng3-3/+0
The inclusion of "target/riscv/cpu.h" is unnecessary in various sifive model drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hw: Change to use qemu_log_mask(LOG_GUEST_ERROR, ...) insteadBin Meng3-9/+13
Replace the call to hw_error() with qemu_log_mask(LOG_GUEST_ERROR,...) in various sifive models. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hw: Change create_fdt() to return voidBin Meng2-14/+8
There is no need to return fdt at the end of create_fdt() because it's already saved in s->fdt. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hw: Remove not needed PLIC properties in device treeBin Meng2-4/+0
This removes "reg-names" and "riscv,max-priority" properties of the PLIC node from device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jonathan Behrens <fintelia@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cellBin Meng2-21/+21
Some of the properties only have 1 cell so we should use qemu_fdt_setprop_cell() instead of qemu_fdt_setprop_cells(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
generated by cgit v1.1 at 2025-01-27 11:36:38 +0000