aboutsummaryrefslogtreecommitdiff
path: root/hw/riscv/virt.c
AgeCommit message (Collapse)AuthorFilesLines
2022-04-22hw/riscv: virt: fix DT property mmu-type when CPU mmu option is disabledNiklas Cassel1-2/+8
The device tree property "mmu-type" is currently exported as either "riscv,sv32" or "riscv,sv48". However, the riscv cpu device tree binding [1] has a specific value "riscv,none" for a HART without a MMU. Set the device tree property "mmu-type" to "riscv,none" when the CPU mmu option is disabled using rv32,mmu=off or rv64,mmu=off. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/riscv/cpus.yaml?h=v5.17 Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220414155510.1364147-1-niklas.cassel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-22hw/riscv: virt: Exit if the user provided -bios in combination with KVMRalf Ramsauer1-4/+10
The -bios option is silently ignored if used in combination with -enable-kvm. The reason is that the machine starts in S-Mode, and the bios typically runs in M-Mode. Better exit in that case to not confuse the user. Signed-off-by: Ralf Ramsauer <ralf.ramsauer@oth-regensburg.de> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup@brainfault.org> Message-Id: <20220401121842.2791796-1-ralf.ramsauer@oth-regensburg.de> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-03-03hw/riscv: virt: Increase maximum number of allowed CPUsAnup Patel1-0/+10
To facilitate software development of RISC-V systems with large number of HARTs, we increase the maximum number of allowed CPUs to 512 (2^9). We also add a detailed source level comments about limit defines which impact the physical address space utilization. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-Id: <20220220085526.808674-6-anup@brainfault.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-03-03hw/riscv: virt: Add optional AIA IMSIC support to virt machineAnup Patel1-81/+358
We extend virt machine to emulate both AIA IMSIC and AIA APLIC devices only when "aia=aplic-imsic" parameter is passed along with machine name in the QEMU command-line. The AIA IMSIC is only a per-HART MSI controller so we use AIA APLIC in MSI-mode to forward all wired interrupts as MSIs to the AIA IMSIC. We also provide "aia-guests=<xyz>" parameter which can be used to specify number of VS-level AIA IMSIC Guests MMIO pages for each HART. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220220085526.808674-4-anup@brainfault.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-03-03hw/riscv: virt: Add optional AIA APLIC support to virt machineAnup Patel1-53/+238
We extend virt machine to emulate AIA APLIC devices only when "aia=aplic" parameter is passed along with machine name in QEMU command-line. When "aia=none" or not specified then we fallback to original PLIC device emulation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220220085526.808674-2-anup@brainfault.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-02-16hw/riscv: virt: Use AIA INTC compatible string when availableAnup Patel1-2/+11
We should use the AIA INTC compatible string in the CPU INTC DT nodes when the CPUs support AIA feature. This will allow Linux INTC driver to use AIA local interrupt CSRs. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-id: 20220204174700.534953-17-anup@brainfault.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21target/riscv: Support start kernel directly by KVMYifei Jiang1-25/+58
Get kernel and fdt start address in virt.c, and pass them to KVM when cpu reset. Add kvm_riscv.h to place riscv specific interface. In addition, PLIC is created without M-mode PLIC contexts when KVM is enabled. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Mingwang Li <limingwang@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Message-id: 20220112081329.1835-7-jiangyifei@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-28hw/riscv: virt: Use the PLIC config helper functionAlistair Francis1-19/+1
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211022060133.3045020-5-alistair.francis@opensource.wdc.com
2021-10-28hw/riscv: virt: Don't use a macro for the PLIC configurationAlistair Francis1-1/+1
Using a macro for the PLIC configuration doesn't make the code any easier to read. Instead it makes it harder to figure out what is going on, so let's remove it. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211022060133.3045020-1-alistair.francis@opensource.wdc.com
2021-10-22hw/riscv: virt: Use machine->ram as the system memoryMingwang Li1-4/+2
If default main_mem is used to be registered as the system memory, other memory cannot be initialized. Therefore, the system memory should be initialized to the machine->ram, which consists of the default main_mem and other possible memory required by applications, such as shared hugepage memory in DPDK. Also, the mc->defaul_ram_id should be set to the default main_mem, such as "riscv_virt_board.ram" for the virt machine. Signed-off-by: Mingwang Li <limingwang@huawei.com> Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211016030908.40480-1-limingwang@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/riscv: virt: Add optional ACLINT support to virt machineAnup Patel1-1/+112
We extend virt machine to emulate ACLINT devices only when "aclint=on" parameter is passed along with machine name in QEMU command-line. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-5-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/riscv: virt: Re-factor FDT generationAnup Patel1-200/+327
We re-factor and break the FDT generation into smaller functions so that it is easier to modify FDT generation for different configurations of virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-4-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/intc: Upgrade the SiFive CLINT implementation to RISC-V ACLINTAnup Patel1-5/+9
The RISC-V ACLINT is more modular and backward compatible with original SiFive CLINT so instead of duplicating the original SiFive CLINT implementation we upgrade the current SiFive CLINT implementation to RISC-V ACLINT implementation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-3-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/intc: Rename sifive_clint sources to riscv_aclint sourcesAnup Patel1-1/+1
We will be upgrading SiFive CLINT implementation into RISC-V ACLINT implementation so let's first rename the sources. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-2-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/intc: sifive_plic: Convert the PLIC to use RISC-V CPU GPIO linesAlistair Francis1-1/+1
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V CPU GPIO lines to set the external MIP bits. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 0364190bfa935058a845c0fa1ecf650328840ad5.1630301632.git.alistair.francis@wdc.com
2021-09-01hw/riscv/virt.c: Assemble plic_hart_config string with g_strjoinv()Peter Maydell1-13/+20
In the riscv virt machine init function, We assemble a string plic_hart_config which is a comma-separated list of N copies of the VIRT_PLIC_HART_CONFIG string. The code that does this has a misunderstanding of the strncat() length argument. If the source string is too large strncat() will write a maximum of length+1 bytes (length bytes from the source string plus a trailing NUL), but the code here assumes that it will write only length bytes at most. This isn't an actual bug because the code has correctly precalculated the amount of memory it needs to allocate so that it will never be too small (i.e. we could have used plain old strcat()), but it does mean that the code looks like it has a guard against accidental overrun when it doesn't. Rewrite the string handling here to use the glib g_strjoinv() function, which means we don't need to do careful accountancy of string lengths, and makes it clearer that what we're doing is "create a comma-separated string". Fixes: Coverity 1460752 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210812144647.10516-1-peter.maydell@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-01hw/riscv: virt: Move flash node to rootBin Meng1-1/+1
The flash is not inside the SoC, so it's inappropriate to put it under the /soc node. Move it to root instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210807035641.22449-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-08-26arch_init.h: Don't include arch_init.h unnecessarilyPeter Maydell1-1/+0
arch_init.h only defines the QEMU_ARCH_* enumeration and the arch_type global. Don't include it in files that don't use those. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210730105947.28215-8-peter.maydell@linaro.org
2021-06-08hw/riscv: Use macros for BIOS image namesBin Meng1-4/+2
The OpenSBI BIOS image names are used by many RISC-V machines. Let's define macros for them. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-7-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08hw/riscv: Support the official PLIC DT bindingsBin Meng1-1/+5
The official DT bindings of PLIC uses "sifive,plic-1.0.0" as the compatible string in the upstream Linux kernel. "riscv,plic0" is now legacy and has to be kept for backward compatibility of legacy systems. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-4-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08hw/riscv: Support the official CLINT DT bindingsBin Meng1-1/+5
Linux kernel commit a2770b57d083 ("dt-bindings: timer: Add CLINT bindings") adds the official DT bindings for CLINT, which uses "sifive,clint0" as the compatible string. "riscv,clint0" is now legacy and has to be kept for backward compatibility of legacy systems. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-3-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08hw/riscv: virt: Switch to use qemu_fdt_setprop_string_array() helperBin Meng1-2/+5
Since commit 78da6a1bca22 ("device_tree: add qemu_fdt_setprop_string_array helper"), we can use the new helper to set the compatible strings for the SiFive test device node. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-2-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-02hw: Do not include qemu/log.h if it is not necessaryThomas Huth1-1/+0
Many files include qemu/log.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210328054833.2351597-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-22hw/riscv: allow ramfb on virtAsherah Connor1-0/+3
Allow ramfb on virt. This lets `-device ramfb' work. Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210318235041.17175-3-ashe@kivikakk.ee Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-22hw/riscv: Add fw_cfg support to virtAsherah Connor1-0/+30
Provides fw_cfg for the virt machine on riscv. This enables using e.g. ramfb later. Signed-off-by: Asherah Connor <ashe@kivikakk.ee> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210318235041.17175-2-ashe@kivikakk.ee Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-10hw/riscv: migrate fdt field to generic MachineStateAlex Bennée1-10/+10
This is a mechanical change to make the fdt available through MachineState. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210303173642.3805-3-alex.bennee@linaro.org>
2021-03-04hw/riscv: virt: Map high mmio for PCIeBin Meng1-2/+33
Some peripherals require 64-bit PCI address, so let's map the high mmio space for PCIe. For RV32, the address is hardcoded to below 4 GiB from the highest accessible physical address. For RV64, the base address depends on top of RAM and is aligned to its size which is using 16 GiB for now. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210220144807.819-5-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04hw/riscv: virt: Limit RAM size in a 32-bit systemBin Meng1-0/+10
RV32 supports 34-bit physical address hence the maximum RAM size should be limited. Limit the RAM size to 10 GiB, which leaves some room for PCIe high mmio space. For 32-bit host, this is not needed as machine->ram_size cannot represent a RAM size that big. Use a #if size test to only do the size limitation for the 64-bit host. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210220144807.819-4-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04hw/riscv: virt: Drop the 'link_up' parameter of gpex_pcie_init()Bin Meng1-7/+7
`link_up` is never used in gpex_pcie_init(). Drop it. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210220144807.819-3-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-03-04hw/riscv: Drop 'struct MemmapEntry'Bin Meng1-6/+3
There is already a MemMapEntry type defined in hwaddr.h. Let's drop the RISC-V defined `struct MemmapEntry` and use the existing one. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210220144807.819-2-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-01-16riscv: Pass RISCVHartArrayState by pointerAlistair Francis1-4/+4
We were accidently passing RISCVHartArrayState by value instead of pointer. The type is 824 bytes long so let's correct that and pass it by pointer instead. Fixes: Coverity CID 1438099 Fixes: Coverity CID 1438100 Fixes: Coverity CID 1438101 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Message-id: f3e04424723e0e222769991896cc82308fd23f76.1610751609.git.alistair.francis@wdc.com
2020-12-17hw/riscv: Use the CPU to determine if 32-bitAlistair Francis1-4/+5
Instead of using string compares to determine if a RISC-V machine is using 32-bit or 64-bit CPUs we can use the initalised CPUs. This avoids us having to maintain a list of CPU names to compare against. This commit also fixes the name of the function to match the riscv_cpu_is_32bit() function. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 8ab7614e5df93ab5267788b73dcd75f9f5615e82.1608142916.git.alistair.francis@wdc.com
2020-12-17hw/riscv: virt: Remove compile time XLEN checksAlistair Francis1-15/+17
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: d7ca1aca672515e6a4aa0d41716238b055f3f25c.1608142916.git.alistair.francis@wdc.com
2020-12-17hw/riscv: boot: Remove compile time XLEN checksAlistair Francis1-1/+1
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: 51e9842dbed1acceebad7f97bd3aae69aa1ac19e.1608142916.git.alistair.francis@wdc.com
2020-12-17riscv: virt: Remove target macro conditionalsAlistair Francis1-1/+1
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: aed1174c2efd2f050fa5bd8f524d68795b12c0e4.1608142916.git.alistair.francis@wdc.com
2020-12-15vl: make qemu_get_machine_opts staticPaolo Bonzini1-4/+2
Machine options can be retrieved as properties of the machine object. Encourage that by removing the "easy" accessor to machine options. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-03hw/riscv: virt: Allow passing custom DTBAnup Patel1-7/+20
Extend virt machine to allow passing custom DTB using "-dtb" command-line parameter. This will help users pass modified DTB to virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201022053225.2596110-2-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-22hw/riscv: Load the kernel after the firmwareAlistair Francis1-3/+8
Instead of loading the kernel at a hardcoded start address, let's load the kernel at the next aligned address after the end of the firmware. This should have no impact for current users of OpenSBI, but will allow loading a noMMU kernel at the start of memory. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 46c00c4f15b42feb792090e3d74359e180a6d954.1602634524.git.alistair.francis@wdc.com
2020-09-09hw/riscv: Move sifive_test model to hw/miscBin Meng1-1/+1
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_test model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_plic model to hw/intcBin Meng1-1/+1
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_plic model to hw/intc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_clint model to hw/intcBin Meng1-1/+1
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_clint model to hw/intc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: clint: Avoid using hard-coded timebase frequencyBin Meng1-1/+2
At present the CLINT timestamp is using a hard-coded timebase frequency value SIFIVE_CLINT_TIMEBASE_FREQ. This might not be true for all boards. Add a new 'timebase-freq' property to the CLINT device, and update various functions to accept this as a parameter. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-16-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-25hw/riscv: virt: Allow creating multiple NUMA socketsAnup Patel1-227/+299
We extend RISC-V virt machine to allow creating a multi-socket machine. Each RISC-V virt machine socket is a NUMA node having a set of HARTs, a memory instance, a CLINT instance, and a PLIC instance. Other devices are shared between all sockets. We also update the generated device tree accordingly. By default, NUMA multi-socket support is disabled for RISC-V virt machine. To enable it, users can use "-numa" command-line options of QEMU. Example1: For two NUMA nodes with 2 CPUs each, append following to command-line options: "-smp 4 -numa node -numa node" Example2: For two NUMA nodes with 1 and 3 CPUs, append following to command-line options: "-smp 4 -numa node -numa node -numa cpu,node-id=0,core-id=0 \ -numa cpu,node-id=1,core-id=1 -numa cpu,node-id=1,core-id=2 \ -numa cpu,node-id=1,core-id=3" The maximum number of sockets in a RISC-V virt machine is 8 but this limit can be changed in future. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Message-Id: <20200616032229.766089-6-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-25hw/riscv: Allow creating multiple instances of PLICAnup Patel1-1/+1
We extend PLIC emulation to allow multiple instances of PLIC in a QEMU RISC-V machine. To achieve this, we remove first HART id zero assumption from PLIC emulation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200616032229.766089-3-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-25hw/riscv: Allow creating multiple instances of CLINTAnup Patel1-1/+1
We extend CLINT emulation to allow multiple instances of CLINT in a QEMU RISC-V machine. To achieve this, we remove first HART id zero assumption from CLINT emulation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-Id: <20200616032229.766089-2-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-21hw/riscv: Use pre-built bios image of generic platform for virt & sifive_uBin Meng1-2/+2
Update virt and sifive_u machines to use the opensbi fw_dynamic bios image built for the generic FDT platform. Remove the out-of-date no longer used bios images. Note: 1. To test 32-bit Linux kernel on QEMU 'sifive_u' 32-bit machine, the following patch is needed: http://lists.infradead.org/pipermail/linux-riscv/2020-July/001213.html 2. To test 64-bit Linux 5.3 kernel on QEMU 'virt' or 'sifive_u' 64-bit machines, the following commit should be cherry-picked to 5.3: commit 922b0375fc93fb1a20c5617e37c389c26bbccb70 Author: Albert Ou <aou@eecs.berkeley.edu> Date: Fri Sep 27 16:14:18 2019 -0700 riscv: Fix memblock reservation for device tree blob Linux 5.4 or above already contains this commit/fix. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1596439832-29238-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-13hw/riscv: Modify MROM size to end at 0x10000Bin Meng1-1/+1
At present the size of Mask ROM for sifive_u / spike / virt machines is set to 0x11000, which ends at an unusual address. This changes the size to 0xf000 so that it ends at 0x10000. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1594289144-24723-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-13riscv: Add opensbi firmware dynamic supportAtish Patra1-3/+9
OpenSBI is the default firmware in Qemu and has various firmware loading options. Currently, qemu loader uses fw_jump which has a compile time pre-defined address where fdt & kernel image must reside. This puts a constraint on image size of the Linux kernel depending on the fdt location and available memory. However, fw_dynamic allows the loader to specify the next stage location (i.e. Linux kernel/U-Boot) in memory and other configurable boot options available in OpenSBI. Add support for OpenSBI dynamic firmware loading support. This doesn't break existing setup and fw_jump will continue to work as it is. Any other firmware will continue to work without any issues as long as it doesn't expect anything specific from loader in "a2" register. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-4-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-13RISC-V: Copy the fdt in dram instead of ROMAtish Patra1-1/+6
Currently, the fdt is copied to the ROM after the reset vector. The firmware has to copy it to DRAM. Instead of this, directly copy the device tree to a pre-computed dram address. The device tree load address should be as far as possible from kernel and initrd images. That's why it is kept at the end of the DRAM or 4GB whichever is lesser. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-3-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-13riscv: Unify Qemu's reset vector code pathAtish Patra1-37/+3
Currently, all riscv machines except sifive_u have identical reset vector code implementations with memory addresses being different for all machines. They can be easily combined into a single function in common code. Move it to common function and let all the machines use the common function. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20200701183949.398134-2-atish.patra@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
generated by cgit v1.1 at 2024-11-17 01:24:05 +0000