| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This adds a "ibm,chip-id" property for CPU nodes which should be the same
for all cores in the same CPU socket. The recent guest kernels use this
information to associate threads with sockets.
Refer to the kernel commit 256f2d4b463d3030ebc8d2b54f427543814a2bdc
for more details.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This allows guests to have a different timebase origin from the host.
This is needed for migration, where a guest can migrate from one host
to another and the two hosts might have a different timebase origin.
However, the timebase seen by the guest must not go backwards, and
should go forwards only by a small amount corresponding to the time
taken for the migration.
This is only supported for recent POWER hardware which has the TBU40
(timebase upper 40 bits) register. That includes POWER6, 7, 8 but not
970.
This adds kvm_access_one_reg() to access a special register which is not
in env->spr. This requires kvm_set_one_reg/kvm_get_one_reg patch.
The feature must be present in the host kernel.
This bumps vmstate_spapr::version_id and enables new vmstate_ppc_timebase
only for it. Since the vmstate_spapr::minimum_version_id remains
unchanged, migration from older QEMU is supported but without
vmstate_ppc_timebase.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Almost all platforms QEMU emulates have some sort of firmware they can load
to expose a guest environment that closely resembles the way it would look
like on real hardware.
This patch introduces such a firmware on our e500 platforms. U-boot is the
default firmware for most of these systems and as such our preferred choice.
For backwards compatibility reasons (and speed and simplicity) we skip u-boot
when you use -kernel and don't pass in -bios. For all other combinations like
-kernel and -bios or no -kernel you get u-boot as firmware.
This allows you to modify the boot environment, execute a networked boot through
the e1000 emulation and execute u-boot payloads.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
We want to move to a model where firmware loads our kernel. To achieve
this we need to be able to tell firmware where the kernel lies.
Let's copy the mechanism we already use for -M pseries and expose the
kernel load address and size through the device tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This patch adds pci pin to irq_num routing callback.
This callback is called from pci_device_route_intx_to_irq to
find which pci device maps to which irq.
This fix is required for pci-device passthrough using vfio.
Also without this patch we gets below prints
"
PCI: Bug - unimplemented PCI INTx routing (e500-pcihost)
qemu-system-ppc64: PCI: Bug - unimplemented PCI INTx routing (e500-pcihost) "
and Legacy interrupt does not work with pci device passthrough.
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[agraf: remove double semicolon]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
- Use PCI_NUM_PINS rather than hardcoding
- use "pin" wherever possible
Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
At the moment XICS does not support interrupts reuse so sPAPR PHB
implements this. sPAPRPHBState holds array of 32 spapr_pci_msi to
describe PCI config address, first MSI and number of MSIs. Once
allocated for a device, QEMU tries reusing this config until the number
of MSIs changes.
Existing SPAPR guests call ibm,change-msi in a loop until the handler
returns the requested number of vectors.
Recently introduced check for the maximum number of MSI/MSIX vectors
supported by a device only works for a device which is new for PHB's
MSI cache. If it is already there, the check is not performed which
leads to new IRQ block allocation. This happens during PCI hotplug
even when the user hot plug the same device which he just hot unplugged.
This moves the check earlier.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
While there, also moved the hard coded value for CLOCKFREQ to a #define.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Current guest kernels try allocating as many vectors as the quota is.
For example, in the case of virtio-net (which has just 3 vectors)
the guest requests 4 vectors (that is the quota in the test) and
the existing ibm,change-msi handler returns 4. But before it returns,
it calls msix_set_message() in a loop and corrupts memory behind
the end of msix_table.
This limits the number of vectors returned by ibm,change-msi to
the maximum supported by the actual device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: qemu-stable@nongnu.org
[agraf: squash in bugfix from aik]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
In the past, IO space could not be mapped into the memory address space
so we introduced a workaround for that. Nowadays it does not look
necessary so we can remove the workaround and make sPAPR PCI
configuration simplier.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
|
|
Total removal of QEMUMachineInitArgs struct. QEMUMachineInitArgs's fields
are copied into MachineState. Removed duplicated fields from MachineState.
All the other changes are only mechanical refactoring, no semantic changes.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (s390)
Reviewed-by: Michael S. Tsirkin <mst@redhat.com> (PC)
[AF: Renamed ms -> machine, use MACHINE_GET_CLASS()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This fixes warnings from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
PortioList is an abstraction used for construction of MemoryRegionPortioList
from MemoryRegionPortio. It can be used later to unmap created memory regions.
It also requires proper cleanup because some of the memory inside is allocated
dynamically.
By moving PortioList ot device state we make it possible to cleanup later and
avoid leaking memory.
This change spans several target platforms. The following testcases cover all
changed lines:
qemu-system-ppc -M prep
qemu-system-i386 -vga qxl
qemu-system-i386 -M isapc -soundhw adlib -device ib700,id=watchdog0,bus=isa.0
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
No need to go through qemu_machine field. Use
MachineClass fields directly.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
In order to eliminate the QEMUMachine indirection,
add its fields directly to MachineClass.
Do not yet remove qemu_machine field because it is
still in use by sPAPR.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
[AF: Copied fields for sPAPR, too]
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
The spinning struct is in guest endianness, so we need to initialize
its variables in guest endianness too.
This fixes booting e500 guests with SMP on x86 for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
There are 3 different variants of the decrementor for BookE and BookS.
The BookE variant sets TSR[DIS] to 1 when the DEC value becomes 1 or 0. TSR[DIS]
is then the indicator whether the decrementor interrupt line is asserted or not.
The old BookS variant treats DEC as an edge interrupt that gets triggered when
the DEC value's top bit turns 1 from 0.
The new BookS variant maintains the assertion bit inside DEC itself. Whenever
the DEC value becomes negative (top bit set) the DEC interrupt line is asserted.
So far we implemented mostly the old BookS variant. Let's do them all properly.
This fixes booting pseries ppc64 guest images in TCG mode for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
We now reset SPRs to their reset values on CPU reset. So if we want
to have an SPR persistently changed, we need to change its default
reset value rather than the value itself manually.
Do this for SPR_BOOKE_PIR, fixing e500v2 SMP boot.
Reported-by: Frederic Konrad <fred.konrad@greensocs.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: KONRAD Frederic <fred.konrad@greensocs.com>
|
|
Add U suffix to various places where we were doing "1 << 31",
which is undefined behaviour, and also to other constant
definitions in the same groups, for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
PowerPC queue for 2.0
* sPAPR loop fix
* SPR reset fix
* Reduce allocation size of indirect opcode tables
* Restrict number of CPU threads
* sPAPR H_SET_MODE fixes
* sPAPR firmware path fixes
* Static and constness cleanups
# gpg: Signature made Thu 20 Mar 2014 01:46:14 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/ppc-for-2.0:
spapr: Implement interface to fix device pathname
spapr: QOM'ify pseries machine
spapr_vio: Fix firmware names
spapr_llan: Add to boot device list
qdev: Introduce FWPathProvider interface
vl.c: Extend get_boot_devices_list() to ignore suffixes
spapr_hcall: Fix little-endian resource handling in H_SET_MODE
target-ppc: Introduce powerisa-207-server flag
target-ppc: Force CPU threads count to be a power of 2
target-ppc: Fix overallocation of opcode tables
target-ppc: Reset SPRs on CPU reset
spapr_hcall: Fix h_enter to loop correctly
target-ppc: Add missing 'static' and 'const' attributes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This extends the pseries machine type with the interface to fix firmware
pathnames for devices which have @bootindex property.
This fixes SCSI disks' device node names (which are wildcard nodes in
the device-tree), for spapr-vscsi, virtio-scsi and usb-storage.
This fixes PHB name from "pci" to "pci@XXXX" where XXXX is a BUID as
there is no bus on top of sPAPRPHBState where PHB firmware name could
be fixed using the BusClass::get_fw_dev_path() mechanism.
This stores the boot list in the /chosen/qemu,boot-list property of
the device tree. "\n" are replaced by spaces to support OF1275.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This changes VIO bridge fw name from spapr-vio-bridge to vdevice and
vscsi/veth node names from QEMU object names to VIO specific device tree
names.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This changes resource code definitions to ones used in the host kernel.
This fixes H_SET_MODE_RESOURCE_LE (switch between big endian and
little endian) to sync registers from KVM before changing LPCR value.
This adds a set_spr() helper to update an SPR in a CPU's context to avoid
possible races and makes use of it to change LPCR.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
We wanted to loop till index is 8. On 8 we return with H_PTEG_FULL. If we
are successful in loading hpte with any other index, we continue with that
index value.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
PCI memory region is 0x3f000000 bytes starting at 0xc0000000.
However, keep compatibility with Open Hack'Ware expectations
by adding a hack for Open Hack'Ware display.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
|
|
Remove now duplicated code from prep board.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
|
|
PowerPC queue for 2.0
* Fixes for -device VGA
# gpg: Signature made Thu 13 Mar 2014 19:57:12 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/ppc-for-2.0:
spapr: Fix return value of vga initialization
Fix vga_interface_type for command line argument '-device VGA'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
PReP machine and devices
* ppc_rom.bin update
* Raven PCI host bridge preparations for OpenBIOS
# gpg: Signature made Thu 13 Mar 2014 19:28:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/prep-for-2.0:
raven: Move BIOS loading from board code to PCI host
prep: Update ppc_rom.bin
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Before spapr_vga_init will returned false if the vga is specified by
the command '-device VGA' because vga_interface_type was evaluated to
VGA_NONE. With the change in previous patch of this series,
spapr_vga_init should return true if it's told that the vga will be
initialized in flow of the generic devices initialization.
To keep '-nodefaults' have the semantics of bare minimum, it adds a
check of 'has_defaults' in usb_enabled() to avoid that a USB controller
is added by '-nodefautls, -device VGA' implicitly.
This patch also makes two cleanups:
1. skip initialization for VGA_NONE
2. remove the useless 'break'
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Raven datasheet explains where firmware lives in system memory, so do
it there instead of in board code. Other boards using the same PCI
host will not have to copy the firmware loading code.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
[AF: Drop BIOS size workaround in favor of replacing our firmware blob]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
|
|
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Commits fdfba1a298ae26dd44bcfdb0429314139a0bc55a,
ab1da85791340e504d10487e1add81b9988afa98,
f606604f1c10b60ef294f1b9b229426521a365e3 and
2c17449b3022ca9623c4a7e2a504a4150ac4ad30 added usages of ENV_GET_CPU()
macro in target-specific code.
Use ppc_env_get_cpu() instead.
Cc: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
PowerPC queue for 2.0-rc0
* QEMUMachine include cleanup
* SLOF update
* XICS reset fix
* sPAPR PCI host bridge refactorings
# gpg: Signature made Thu 13 Mar 2014 02:50:51 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/ppc-for-2.0:
spapr-pci: Convert fprintf() to error_report()
spapr-pci: Convert to QOM realize
xics-kvm: Fix reset function
pseries: Update SLOF firmware image to qemu-slof-20140304
Move QEMUMachine typedef to qemu/typedefs.h
Revert "KVM: Split QEMUMachine typedef into separate header"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This converts the old-style SysBusDevice::init() callback to a new-style
DeviceClass::realize() callback.
As a part of conversion, this replaces fprintf(stderr) with error_setg()
as realize() does not "return" any value, instead it puts the extended
error into **errp.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Previously libvirt required the first/default PCI bus to have name "pci".
Since QEMU can support multiple buses now, libvirt wants "pci.0" now.
This removes custom bus name and lets QEMU make up default names.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This makes use of @cpu_dt_id and related API in:
1. emulated XICS hypercall handlers as they receive fixed CPU indexes;
2. XICS-KVM to enable in-kernel XICS on right CPU;
3. device-tree renderer.
This removes @cpu_index fixup as @cpu_dt_id is used instead so QEMU monitor
can accept command-line CPU indexes again.
This changes kvm_arch_vcpu_id() to use ppc_get_vcpu_dt_id() as at the moment
KVM CPU id and device tree ID are calculated using the same algorithm.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Normally CPUState::cpu_index is used to pick the right CPU for various
operations. However default consecutive numbering does not always work
for POWERPC.
These indexes are reflected in /proc/device-tree/cpus/PowerPC,POWER7@XX
and used to call KVM VCPU's ioctls. In order to achieve this,
kvmppc_fixup_cpu() was introduced. Roughly speaking, it multiplies
cpu_index by the number of threads per core.
This approach has disadvantages such as:
1. NUMA configuration stays broken after the fixup;
2. CPU-targeted commands from the QEMU Monitor do not work properly as
CPU indexes have been fixed and there is no clear way for the user to
know what the new CPU indexes are.
This introduces a @cpu_dt_id field in the CPUPPCState struct which
is initialized from @cpu_index by default and can be fixed later
to meet the device tree requirements.
This adds an API to handle @cpu_dt_id.
This removes kvmppc_fixup_cpu() as it is not more needed, @cpu_dt_id
is calculated in ppc_cpu_realize().
This will be used later in machine code.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This patch introduces the hypervisor call H_GET_TCE which is basically the
reverse of H_PUT_TCE, as defined in the Power Architecture Platform
Requirements (PAPR).
The hcall H_GET_TCE is required by the kdump kernel which is calling it to
retrieve the TCE set up by the panicing kernel.
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
For updating in kernel htab we need to provide both pte0 and pte1, hence update
the interface to take pte0 and pte1 together
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ ldq_phys() API change, Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
With kvm enabled, we store the hash page table information in the hypervisor.
Use ioctl to read the htab contents. Without this we get the below error when
trying to read the guest address
(gdb) x/10 do_fork
0xc000000000098660 <do_fork>: Cannot access memory at address 0xc000000000098660
(gdb)
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ fixes for 32 bit build (casts!), ldq_phys() API change,
Greg Kurz <gkurz@linux.vnet.ibm.com ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Correctly update the htab_mask using the return value of
KVM_PPC_ALLOCATE_HTAB ioctl. Also we don't update sdr1
on GET_SREGS for HV. We check for external htab and if
found true, we don't need to update sdr1
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ fixed pte group offset computation in ppc_hash64_htab_lookup() that
caused TCG to fail, Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
We currently size the msi window trap page according to the host's page
size so that we poke a working hole into a memory slot in case we overlap.
However, this is only ever necessary with KVM active. Without KVM, we should
rather try to be host platform agnostic and use a constant size: 4k.
This fixes a build breakage on win32 hosts.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
We will use this in later patches to make sure we use the right load
functions when copying hpte entries.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This makes use of new error codes which load_elf() can return and
prints more informative error message.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Currently everybody uses ELF kernel images with "-kernel" option on
pseries machine but QEMU still tries to boot from an image even it
fails to recognize it is ELF. This produces undefined behaviour if
the user tries a kernel image compiled for another architecture.
This removes support of raw kernel images.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
[agraf: fix up stray quotes and newlines in strings]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Recent changes introduced cannot_instantiate_with_device_add_yet
and removed capability of adding yet another PCI host bridge via
command line for SPAPR platform (POWERPC64 server).
This brings the capability back and puts SPAPR PHB into "bridge"
category.
This is not much use for emulated PHB but it is absolutely required
for VFIO as we put an IOMMU group onto a separate PHB on SPAPR.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
