aboutsummaryrefslogtreecommitdiff
path: root/hw/ppc/spapr_events.c
AgeCommit message (Collapse)AuthorFilesLines
2020-10-28ppc/spapr: re-assert IRQs during event-scan if there are pendingLaurent Vivier1-0/+12
If we hotplug a CPU during the first second of the kernel boot, the IRQ can be sent to the kernel while the RTAS event handler is not installed. The event is queued, but the kernel doesn't collect it and ignores the new CPU. As the code relies on edge-triggered IRQ, we can re-assert it during the event-scan RTAS call if there are still pending events (as it is already done in check-exception). Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20201015210318.117386-1-lvivier@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-07ppc/spapr: Don't kill the guest if a recovered FWNMI machine check delivery ↵Nicholas Piggin1-5/+25
fails Try to be tolerant of FWNMI delivery errors if the machine check had been recovered by the host. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20200325142906.221248-5-npiggin@gmail.com> Reviewed-by: Greg Kurz <groug@kaod.org> [dwg: Updated comment at Greg's suggestion] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-07ppc/spapr: Add FWNMI machine check delivery warningsNicholas Piggin1-0/+4
Add some messages which explain problems and guest misbehaviour that may be difficult to diagnose in rare cases of machine checks. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20200325142906.221248-4-npiggin@gmail.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-07ppc/spapr: Improve FWNMI machine check delivery corner case commentsNicholas Piggin1-8/+11
Some of the conditions are not as clearly documented as they could be. Also the non-FWNMI case does not need a large comment. Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20200325142906.221248-3-npiggin@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-03-24ppc/spapr: Set the effective address provided flag in mc error log.Mahesh Salgaonkar1-0/+26
Per PAPR, it is expected to set effective address provided flag in sub_err_type member of mc extended error log (i.e rtas_event_log_v6_mc.sub_err_type). This somehow got missed in original fwnmi-mce patch series. The current code just updates the effective address but does not set the flag to indicate that it is available. Hence guest fails to extract effective address from mce rtas log. This patch fixes that. Without this patch guest MCE logs fails print DAR value: [ 11.933608] Disabling lock debugging due to kernel taint [ 11.933773] MCE: CPU0: machine check (Severe) Host TLB Multihit [Recovered] [ 11.933979] MCE: CPU0: NIP: [c000000000090b34] radix__flush_tlb_range_psize+0x194/0xf00 [ 11.934223] MCE: CPU0: Initiator CPU [ 11.934341] MCE: CPU0: Unknown After the change: [ 22.454149] Disabling lock debugging due to kernel taint [ 22.454316] MCE: CPU0: machine check (Severe) Host TLB Multihit DAR: deadbeefdeadbeef [Recovered] [ 22.454605] MCE: CPU0: NIP: [c0000000003e5804] kmem_cache_alloc+0x84/0x330 [ 22.454820] MCE: CPU0: Initiator CPU [ 22.454944] MCE: CPU0: Unknown Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Message-Id: <158451653844.22972.17999316676230071087.stgit@jupiter> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-03-17ppc/spapr: Fix FWNMI machine check interrupt deliveryNicholas Piggin1-20/+4
FWNMI machine check delivery misses a few things that will make it fail with TCG at least (which we would like to allow in future to improve testing). It's not nice to scatter interrupt delivery logic around the tree, so move it to excp_helper.c and share code where possible. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20200316142613.121089-5-npiggin@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-03-17ppc/spapr: Change FWNMI namesNicholas Piggin1-7/+7
The option is called "FWNMI", and it involves more than just machine checks, also machine checks can be delivered without the FWNMI option, so re-name various things to reflect that. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20200316142613.121089-3-npiggin@gmail.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-03-17ppc/spapr: Fix FWNMI machine check failure handlingNicholas Piggin1-3/+1
ppc_cpu_do_system_reset delivers a system rreset interrupt to the guest, which is certainly not what is intended here. Panic the guest like other failure cases here do. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20200316142613.121089-2-npiggin@gmail.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-03-17spapr: Handle pending hot plug/unplug requests at CASGreg Kurz1-0/+13
If a hot plug or unplug request is pending at CAS, we currently trigger a CAS reboot, which severely increases the guest boot time. This is because SLOF doesn't handle hot plug events and we had no way to fix the FDT that gets presented to the guest. We can do better thanks to recent changes in QEMU and SLOF: - we now return a full FDT to SLOF during CAS - SLOF was fixed to correctly detect any device that was either added or removed since boot time and to update its internal DT accordingly. The right solution is to process all pending hot plug/unplug requests during CAS: convert hot plugged devices to cold plugged devices and remove the hot unplugged ones, which is exactly what spapr_drc_reset() does. Also clear all hot plug events that are currently queued since they're no longer relevant. Note that SLOF cannot currently populate hot plugged PCI bridges or PHBs at CAS. Until this limitation is lifted, SLOF will reset the machine when this scenario occurs : this will allow the FDT to be fully processed when SLOF is started again (ie. the same effect as the CAS reboot that would occur anyway without this patch). Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <158257222352.4102917.8984214333937947307.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-21spapr: Add NVDIMM device supportShivaprasad G Bhat1-0/+4
Add support for NVDIMM devices for sPAPR. Piggyback on existing nvdimm device interface in QEMU to support virtual NVDIMM devices for Power. Create the required DT entries for the device (some entries have dummy values right now). The patch creates the required DT node and sends a hotplug interrupt to the guest. Guest is expected to undertake the normal DR resource add path in response and start issuing PAPR SCM hcalls. The device support is verified based on the machine version unlike x86. This is how it can be used .. Ex : For coldplug, the device to be added in qemu command line as shown below -object memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896 -device nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0 For hotplug, the device to be added from monitor as below object_add memory-backend-file,id=memnvdimm0,prealloc=yes,mem-path=/tmp/nvdimm0,share=yes,size=1073872896 device_add nvdimm,label-size=128k,uuid=75a3cdd7-6a2f-4791-8d15-fe0a920e8e9e,memdev=memnvdimm0,id=nvdimm0,slot=0 Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Signed-off-by: Bharata B Rao <bharata@linux.ibm.com> [Early implementation] Message-Id: <158131058078.2897.12767731856697459923.stgit@lep8c.aus.stglabs.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-03migration: Include migration support for machine check handlingAravinda Prasad1-1/+15
This patch includes migration support for machine check handling. Especially this patch blocks VM migration requests until the machine check error handling is complete as these errors are specific to the source hardware and is irrelevant on the target hardware. Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com> [Do not set FWNMI cap in post_load, now its done in .apply hook] Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com> Message-Id: <20200130184423.20519-7-ganeshgr@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-03target/ppc: Build rtas error log upon an MCEAravinda Prasad1-1/+219
Upon a machine check exception (MCE) in a guest address space, KVM causes a guest exit to enable QEMU to build and pass the error to the guest in the PAPR defined rtas error log format. This patch builds the rtas error log, copies it to the rtas_addr and then invokes the guest registered machine check handler. The handler in the guest takes suitable action(s) depending on the type and criticality of the error. For example, if an error is unrecoverable memory corruption in an application inside the guest, then the guest kernel sends a SIGBUS to the application. For recoverable errors, the guest performs recovery actions and logs the error. Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com> [Assume SLOF has allocated enough room for rtas error log] Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20200130184423.20519-5-ganeshgr@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-03target/ppc: Handle NMI guest exitAravinda Prasad1-0/+37
Memory error such as bit flips that cannot be corrected by hardware are passed on to the kernel for handling. If the memory address in error belongs to guest then the guest kernel is responsible for taking suitable action. Patch [1] enhances KVM to exit guest with exit reason set to KVM_EXIT_NMI in such cases. This patch handles KVM_EXIT_NMI exit. [1] https://www.spinics.net/lists/kvm-ppc/msg12637.html (e20bbd3d and related commits) Signed-off-by: Aravinda Prasad <arawinda.p@gmail.com> Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200130184423.20519-4-ganeshgr@linux.ibm.com> [dwg: #ifdefs to fix compile for 32-bit target] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-11-26ppc/spapr_events: fix potential NULL pointer dereference in ↵PanNengyuan1-0/+1
rtas_event_log_dequeue This fixes coverity issues 68911917: 360 CID 68911917: (NULL_RETURNS) 361. dereference: Dereferencing "source", which is known to be "NULL". 361 if (source->mask & event_mask) { 362 break; 363 } Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: PanNengyuan <pannengyuan@huawei.com> Message-Id: <1574685291-38176-1-git-send-email-pannengyuan@huawei.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-21spapr_events: Rewrite a fall through commentPhilippe Mathieu-Daudé1-1/+1
GCC9 is confused by this comment when building with CFLAG -Wimplicit-fallthrough=2: CC ppc64-softmmu/hw/ppc/spapr_rtc.o hw/ppc/spapr_events.c: In function ‘rtas_event_log_to_source’: hw/ppc/spapr_events.c:312:12: error: this statement may fall through [-Werror=implicit-fallthrough=] 312 | if (spapr_ovec_test(spapr->ov5_cas, OV5_HP_EVT)) { | ^ hw/ppc/spapr_events.c:317:5: note: here 317 | case RTAS_LOG_TYPE_EPOW: | ^~~~ cc1: all warnings being treated as errors Rewrite the comment using 'fall through' which is recognized by GCC and static analyzers. Reported-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190719131425.10835-8-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster1-1/+1
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster1-1/+0
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster1-0/+2
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-03-12spapr: Use CamelCase properlyDavid Gibson1-46/+46
The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26spapr_events: add support for phb hotplug eventsMichael Roth1-0/+3
Extend the existing EPOW event format we use for PCI devices to emit PHB plug/unplug events. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155059671405.1466090.535964535260503283.stgit@bahia.lab.toulouse-stg.fr.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-17spapr: Rename xics to intc in interrupt controller agnostic codeGreg Kurz1-1/+1
All this code is used with both the XICS and XIVE interrupt controllers. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-08-21spapr: introduce a fixed IRQ number spaceCédric Le Goater1-4/+8
This proposal introduces a new IRQ number space layout using static numbers for all devices, depending on a device index, and a bitmap allocator for the MSI IRQ numbers which are negotiated by the guest at runtime. As the VIO device model does not have a device index but a "reg" property, we introduce a formula to compute an IRQ number from a "reg" value. It should minimize most of the collisions. The previous layout is kept in pre-3.1 machines raising the 'legacy_irq_allocation' machine class flag. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-21spapr: split the IRQ allocation sequenceCédric Le Goater1-4/+14
Today, when a device requests for IRQ number in a sPAPR machine, the spapr_irq_alloc() routine first scans the ICSState status array to find an empty slot and then performs the assignement of the selected numbers. Split this sequence in two distinct routines : spapr_irq_find() for lookups and spapr_irq_claim() for claiming the IRQ numbers. This will ease the introduction of a static layout of IRQ numbers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-15spapr_events: drop bogus cell from "interrupt-ranges" propertyGreg Kurz1-3/+0
According to LoPAPR 1.1 B.6.12, the "/event-sources" node has an "interrupt- ranges" property, the format of which is described in B.6.9.1.2 as follows: “interrupt-ranges” Standard property name that defines the interrupt number(s) and range(s) handled by this unit. prop-encoded-array: List of (int-number, range) specifications. Int-number is encoded as with encode-int. Range is encoded as with encode-int. The first entry in this list shall contain the int-number associated with the first “reg” property entry. The int-num-ber is the value representing the interrupt source as would appear in the PowerPC External Interrupt Architecture XISR. The range shall be the number of sequential interrupt numbers which this unit can generate. There's no such thing as a cell count at the end of the array, like the one introduced by commit ffbb1705a33d in QEMU 2.8. It doesn't seem it had any impact on existing guests and I couldn't find any related workaround in linux. So, let's just drop the bogus lines. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-15spapr: fix LSI interrupt specifiers in the device treeGreg Kurz1-2/+1
LoPAPR 1.1 B.6.9.1.2 describes the "#interrupt-cells" property of the PowerPC External Interrupt Source Controller node as follows: “#interrupt-cells” Standard property name to define the number of cells in an interrupt- specifier within an interrupt domain. prop-encoded-array: An integer, encoded as with encode-int, that denotes the number of cells required to represent an interrupt specifier in its child nodes. The value of this property for the PowerPC External Interrupt option shall be 2. Thus all interrupt specifiers (as used in the standard “interrupts” property) shall consist of two cells, each containing an integer encoded as with encode-int. The first integer represents the interrupt number the second integer is the trigger code: 0 for edge triggered, 1 for level triggered. This patch fixes the interrupt specifiers in the "interrupt-map" property of the PHB node, that were setting the second cell to 8 (confusion with IRQ_TYPE_LEVEL_LOW ?) instead of 1. VIO devices and RTAS event sources use the same format for interrupt specifiers: while here, we introduce a common helper to handle the encoding details. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> -- v3: - reference public LoPAPR instead of internal PAPR+ in changelog - change helper name to spapr_dt_xics_irq() v2: - drop the erroneous changes to the "interrupts" prop in PCI device nodes - introduce a common helper to encode interrupt specifiers Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-15spapr: introduce a spapr_qirq() helperCédric Le Goater1-7/+5
xics_get_qirq() is only used by the sPAPR machine. Let's move it there and change its name to reflect its scope. It will be useful for XIVE support which will use its own set of qirqs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-15spapr: move the IRQ allocation routines under the machineCédric Le Goater1-2/+2
Also change the prototype to use a sPAPRMachineState and prefix them with spapr_irq_. It will let us synchronise the IRQ allocation with the XIVE interrupt mode when available. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-15spapr_events: use QTAILQ_FOREACH_SAFE() in spapr_clear_pending_events()Greg Kurz1-2/+2
QTAILQ_FOREACH_SAFE() must be used when removing the current element inside the loop block. This fixes a user-after-free error introduced by commit 56258174238eb and reported by Coverity (CID 1381017). Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-08hw/ppc: clear pending_events on machine resetDaniel Henrique Barboza1-0/+11
The sPAPR machine isn't clearing up the pending events QTAILQ on machine reboot. This allows for unprocessed hotplug/epow events to persist in the queue after reset and, when reasserting the IRQs in check_exception later on, these will be being processed by the OS. This patch implements a new function called 'spapr_clear_pending_events' that clears up the pending_events QTAILQ. This helper is then called inside ppc_spapr_reset to clear up the events queue, preventing old/deprecated events from persisting after a reset. Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-07-17spapr: Minor cleanups to events handlingDavid Gibson1-23/+22
The rtas_error_log structure is marked packed, which strongly suggests its precise layout is important to match an external interface. Along with that one could expect it to have a fixed endianness to match the same interface. That used to be the case - matching the layout of PAPR RTAS event format and requiring BE fields. Now, however, it's only used embedded within sPAPREventLogEntry with the fields in native order, since they're processed internally. Clear that up by removing the nested structure in sPAPREventLogEntry. struct rtas_error_log is moved back to spapr_events.c where it is used as a temporary to help convert the fields in sPAPREventLogEntry to the correct in memory format when delivering an event to the guest. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-07-17spapr: migrate pending_events of spapr stateDaniel Henrique Barboza1-46/+53
In racing situations between hotplug events and migration operation, a rtas hotplug event could have not yet be delivered to the source guest when migration is started. In this case the pending_events of spapr state need be transmitted to the target so that the hotplug event can be finished on the target. To achieve the minimal VMSD possible to migrate the pending_events list, this patch makes the changes in spapr_events.c: - 'log_type' of sPAPREventLogEntry struct deleted. This information can be derived by inspecting the rtas_error_log summary field. A new function called 'spapr_event_log_entry_type' was added to retrieve the type of a given sPAPREventLogEntry. - sPAPREventLogEntry, epow_log_full and hp_log_full were redesigned. The only data we're going to migrate in the VMSD is the event log data itself, which can be divided in two parts: a rtas_error_log header and an extended event log field. The rtas_error_log header contains information about the size of the extended log field, which can be used inside VMSD as the size parameter of the VBUFFER_ALOC field that will store it. To allow this use, the header.extended_length field must be exposed inline to the VMSD instead of embedded into a 'data' field that holds everything. With this in mind, the following changes were done: * a new 'header' field was added to sPAPREventLogEntry. This field holds a a struct rtas_error_log inline. * the declaration of the 'rtas_error_log' struct was moved to spapr.h to be visible to the VMSD macros. * 'data' field of sPAPREventLogEntry was renamed to 'extended_log' and now holds only the contents of the extended event log. * 'struct rtas_error_log hdr' were taken away from both epow_log_full and hp_log_full. This information is now available at the header field of sPAPREventLogEntry. * epow_log_full and hp_log_full were renamed to epow_extended_log and hp_extended_log respectively. This rename makes it clearer to understand the new purpose of both structures: hold the information of an extended event log field. * spapr_powerdown_req and spapr_hotplug_req_event now creates a sPAPREventLogEntry structure that contains the full rtas log entry. * rtas_event_log_queue and rtas_event_log_dequeue now receives a sPAPREventLogEntry pointer as a parameter instead of a void pointer. - the endianess of the sPAPREventLogEntry header is now native instead of be32. We can use the fields in native endianess internally and write them in be32 in the guest physical memory inside 'check_exception'. This allows the VMSD inside spapr.c to read the correct size of the entended_log field. - inside spapr.c, pending_events is put in a subsection in the spapr state VMSD to make sure migration across different versions is not broken. A small change in rtas_event_log_queue and rtas_event_log_dequeue were also made: instead of calling qdev_get_machine(), both functions now receive a pointer to the sPAPRMachineState. This pointer is already available in the callers of these functions and we don't need to waste resources calling qdev() again. Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-06-30spapr: Eliminate DRC 'signalled' state variableDavid Gibson1-10/+0
The 'signalled' field in the DRC appears to be entirely a torturous workaround for the fact that PCI devices were started in UNISOLATED state for unclear reasons. 1) 'signalled' is already meaningless for logical (so far, all non PCI) DRCs. It's always set to true (at least at any point it might be tested), and can't be assigned any real meaning due to the way signalling works for logical DRCs. 2) For PCI DRCs, the only time signalled would be false is when non-zero functions of a multifunction device are hotplugged, followed by function zero (the other way around is explicitly not permitted). In that case the secondary function DRCs are attached, but the notification isn't sent to the guest until function 0 is plugged. 3) signalled being false is used to allow a DRC detach to switch mode back to ISOLATED state, which allows a secondary function to be hotplugged then unplugged with function 0 never inserted. Without this a secondary function starting in UNISOLATED state couldn't be detached again without function 0 being inserted, all the functions configured by the guest, then sent back to ISOLATED state. 4) But now that PCI DRCs start in ISOLATED state, there's nothing to be done. If the guest doesn't get the notification, it won't switch the device to UNISOLATED state, so nothing prevents it from being unplugged. If the guest does move it to UNISOLATED state without the signal (due to a manual drmgr call, for instance) then it really isn't safe to unplug it. So, this patch removes the signalled variable and all code related to it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-06-06spapr: Clean up spapr_dr_connector_by_*()David Gibson1-1/+1
* Change names to something less ludicrously verbose * Now that we have QOM subclasses for the different DRC types, use a QOM typename instead of a PAPR type value parameter The latter allows removal of the get_type_shift() helper. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2017-06-06spapr: Make DRC get_index and get_type methods into plain functionsDavid Gibson1-6/+4
These two methods only have one implementation, and the spec they're implementing means any other implementation is unlikely, verging on impossible. So replace them with simple functions. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
2017-06-02Remove/replace sysemu/char.h inclusionMarc-André Lureau1-1/+0
Those are apparently unnecessary includes. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-05-24hw/ppc/spapr_events.c: removing 'exception' from sPAPREventLogEntryDaniel Henrique Barboza1-45/+7
Currenty we do not have any RTAS event that is reported by the event-scan interface. The existing events, RTAS_LOG_TYPE_EPOW and RTAS_LOG_TYPE_HOTPLUG, are being reported by the check-exception interface and, as such, marked as 'exception=true'. Commit 79853e18d9, 'spapr_events: event-scan RTAS interface', added the event_scan interface because the guest kernel requires it to initialize other required interfaces. It is acting since then as a stub because no events that would be reported by it were added since then. However, the existence of the 'exception' boolean adds an unnecessary load in the future migration of the pending_events, sPAPREventLogEntry QTAILQ that hosts the pending RTAS events. To make the code cleaner and ease the future migration changes, this patch makes the following changes: - remove the 'exception' boolean that filter these events. There is nothing to filter since all events are reported by check-exception; - functions rtas_event_log_queue, rtas_event_log_dequeue and rtas_event_log_contains don't receive the 'exception' boolean as parameter; - event_scan function was simplified. It was calling 'rtas_event_log_dequeue(mask, false)' that was always returning 'NULL' because we have no events that are created with exception=false, thus in the end it would execute a jump to 'out_no_events' all the time. The function now assumes that this will always be the case and all the remaining logic were deleted. In the future, when or if we add new RTAS events that should be reported with the event_scan interface, we can refer to the changes made in this patch to add the event_scan logic back. Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26ppc/spapr: QOM'ify sPAPRRTCStateCédric Le Goater1-1/+1
Also use an 'sPAPRRTCState' attribute under the sPAPR machine to hold the RTC object. Overall, these changes remove an unnecessary and implicit dependency on SysBus. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01ppc/xics: use the QOM interface to get irqsCédric Le Goater1-3/+3
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01ppc/xics: store the ICS object under the sPAPR machineCédric Le Goater1-2/+2
A list of ICS objects was introduced under the XICS object for the PowerNV machine but, for the sPAPR machine, it brings extra complexity as there is only a single ICS. To simplify the code, let's add the ICS pointer under the sPAPR machine and try to reduce the use of this list where possible. Also, change the xics_spapr_*() routines to use an ICS object instead of an XICSState and change their name to reflect that these are specific to the sPAPR ICS object. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28spapr: Add DRC count indexed hotplug identifier typeBharata B Rao1-15/+61
Add support for DRC count indexed hotplug ID type which is primarily needed for memory hot unplug. This type allows for specifying the number of DRs that should be plugged/unplugged starting from a given DRC index. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> * updated rtas_event_log_v6_hp to reflect count/index field ordering used in PAPR hotplug ACR Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28spapr_events: add support for dedicated hotplug event sourceMichael Roth1-37/+165
Hotplug events were previously delivered using an EPOW interrupt and were queued by linux guests into a circular buffer. For traditional EPOW events like shutdown/resets, this isn't an issue, but for hotplug events there are cases where this buffer can be exhausted, resulting in the loss of hotplug events, resets, etc. Newer-style hotplug event are delivered using a dedicated event source. We enable this in supported guests by adding standard an additional event source in the guest device-tree via /event-sources, and, if the guest advertises support for the newer-style hotplug events, using the corresponding interrupt to signal the available of hotplug/unplug events. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28pseries: Move /event-sources construction to spapr_build_fdt()David Gibson1-11/+10
The /event-sources device tree node is built from spapr_create_fdt_skel(). As part of consolidating device tree construction to reset time, this moves it to spapr_build_fdt(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-10-14ppc/xics: Make the ICSState a listBenjamin Herrenschmidt1-1/+1
Instead of an array of fixed sized blocks, use a list, as we will need to have sources with variable number of interrupts. SPAPR only uses a single entry. Native will create more. If performance becomes an issue we can add some hashed lookup but for now this will do fine. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ move the initialization of list to xics_common_initfn, restore xirr_owner after migration and move restoring to icp_post_load] Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> [ clg: removed the icp_post_load() changes from nikunj patchset v3: http://patchwork.ozlabs.org/patch/646008/ ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-07hw/ppc: include fdt helper routine in a common fileCédric Le Goater1-10/+1
spapr_pci would also be a good candidate but the macro _FDT is slightly different. It returns and does not exit. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-07-01ppc/xics: Replace "icp" with "xics" in most placesBenjamin Herrenschmidt1-4/+4
The "ICP" is a different object than the "XICS". For historical reasons, we have a number of places where we name a variable "icp" while it contains a XICSState pointer. There *is* an ICPState structure too so this makes the code really confusing. This is a mechanical replacement of all those instances to use the name "xics" instead. There should be no functional change. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [spapr_cpu_init has been moved to spapr_cpu_core.c, change there] Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-07-01ppc/xics: Rename existing xics to xics_spaprBenjamin Herrenschmidt1-1/+1
The common class doesn't change, the KVM one is sPAPR specific. Rename variables and functions to xics_spapr. Retain the type name as "xics" to preserve migration for existing sPAPR guests. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-17spapr: CPU hotplug supportBharata B Rao1-0/+3
Set up device tree entries for the hotplugged CPU core and use the exising RTAS event logging infrastructure to send CPU hotplug notification to the guest. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-04-26spapr_drc: fix aborts during DRC-count based hotplugMichael Roth1-4/+3
CPU/memory resources can be signalled en-masse via spapr_hotplug_req_add_by_count(), and when doing so, actually change the meaning of the 'drc' parameter passed to spapr_hotplug_req_event() to be a count rather than an index. f40eb92 added a hook in spapr_hotplug_req_event() to record when a device had been 'signalled' to the guest, but that code assumes that drc is always an index. In cases where it's a count, such as memory hotplug, the DRC lookup will fail, leading to an assert. Fix this by only explicitly setting the signalled state for cases where we are doing PCI hotplug. For other resources types, since we cannot selectively track whether a resource has been signalled in cases where we signal attach as a count, set the 'signalled' state to true immediately upon making the resource available via drck->attach(). Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: david@gibson.dropbear.id.au Cc: qemu-ppc@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-04-05spapr_drc: enable immediate detach for unsignalled devicesMichael Roth1-0/+11
Currently spapr doesn't support "aborting" hotplug of PCI devices by allowing device_del to immediately remove the device if we haven't signalled the presence of the device to the guest. In the past this wasn't an issue, since we always immediately signalled device attach and simply relied on full guest-aware add->remove path for device removal. However, as of 788d259, we now defer signalling for PCI functions until function 0 is attached, so now we need to deal with these "abort" operations for cases where a user hotplugs a non-0 function, then opts to remove it prior hotplugging function 0. Currently they'd have to reboot before the unplug completed. PCIe multifunction hotplug does not have this requirement however, so from a management implementation perspective it would be good to address this within the same release as 788d259. We accomplish this by simply adding a 'signalled' flag to track whether a device hotplug event has been sent to the guest. If it hasn't, we allow immediate removal under the assumption that the guest will not be using the device. Devices present at boot/reset time are also assumed to be 'signalled'. For CPU/memory/etc, signalling will still happen immediately as part of device_add, so only PCI functions should be affected. Cc: bharata@linux.vnet.ibm.com Cc: david@gibson.dropbear.id.au Cc: sbhat@linux.vnet.ibm.com Cc: qemu-ppc@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> [dwg: This fixes a regression where an incorrect hot-add of a non-zero function can no longer be backed out until function 0 is added] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa1-1/+2
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-10-01 17:15:36 +0000