aboutsummaryrefslogtreecommitdiff
path: root/hw/ppc/spapr.c
AgeCommit message (Collapse)AuthorFilesLines
2015-11-11spapr: Handle failure of KVM_PPC_ALLOCATE_HTAB ioctlBharata B Rao1-4/+16
KVM_PPC_ALLOCATE_HTAB ioctl can return -ENOMEM for KVM guests and QEMU never handled this correctly. But this didn't cause any problems till now as KVM_PPC_ALLOCATE_HTAB ioctl returned with smaller than requested HTAB when enough contiguous memory wasn't available in the host. After the proposed kernel change: https://patchwork.ozlabs.org/patch/530501/, KVM_PPC_ALLOCATE_HTAB ioctl will not fallback to lower sized HTAB allocation and will fail if requested HTAB size can't be met. Check for such failures in QEMU and abort appropriately. This will prevent guest kernel from hanging/freezing during early boot by doing graceful exit when host is unable to allocate requested HTAB. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-10Rename save_live_complete to save_live_complete_precopyDr. David Alan Gilbert1-1/+1
In postcopy we're going to need to perform the complete phase for postcopiable devices at a different point, start out by renaming all of the 'complete's to make the difference obvious. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-10-29ppc/spapr: add 2.4 compat propsCornelia Huck1-0/+9
HW_COMPAT_2_4 will become non-empty: prepare for it. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1444991154-79217-3-git-send-email-cornelia.huck@de.ibm.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-29Revert "memhp: extend address auto assignment to support gaps"Michael S. Tsirkin1-1/+1
This reverts commit df0acded19ec4b826aa095cfc19d341bd66fafd3. There's no point to it now that the only user has been reverted. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-23ppc/spapr: Add "ibm,pa-features" property to the device-treeBenjamin Herrenschmidt1-0/+31
LoPAPR defines a "ibm,pa-features" per-CPU device tree property which describes extended features of the Processor Architecture. This adds the property to the device tree. At the moment this is the copy of what pHyp advertises except "I=1 (cache inhibited) Large Pages" which is enabled for TCG and disabled when running under HV KVM host with 4K system page size. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [aik: rebased, changed commit log, moved ci_large_pages initialization, renamed pa_features arrays] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23spapr: Add "slb-size" property to CPU device tree nodesThomas Huth1-0/+1
According to a commit message in the Linux kernel (see here https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=b60c31d85a2a for example), the name of the property that carries the information about the number of SLB entries should be called "slb-size", and not "ibm,slb-size". The Linux kernel can deal with both names, but to be on the safe side we should support the official name, too. [Now that LoPAPR is public, the relevant requirement can be found in section C.6.1.8 --dwg] Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23spapr: Abort when HTAB of requested size isn't allocatedBharata B Rao1-0/+8
Terminate the guest when HTAB of requested size isn't allocated by the host. When memory hotplug is attempted on a guest that has booted with less than requested HTAB size, the guest kernel will not be able to gracefully fail the hotplug request. This patch will ensure that we never end up in a situation where memory hotplug fails due to less than requested HTAB size. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-23spapr: Allocate HTAB from machine initBharata B Rao1-7/+27
Allocate HTAB from ppc_spapr_init() so that we can abort the guest if requested HTAB size is't allocated by the host. However retain the htab reset call in spapr_reset_htab() so that HTAB gets reset (and not allocated) during machine reset. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-10-20ppc/spapr: Allow VIRTIO_VGABenjamin Herrenschmidt1-0/+1
It works fine with the Linux driver out of the box Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-02memhp: extend address auto assignment to support gapsIgor Mammedov1-1/+1
setting gap to TRUE will make sparse DIMM address auto allocation, leaving gaps between a new DIMM address and preceeding existing DIMM. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-25ppc: Rename ELF_MACHINE to be PPC specificPeter Crosthwaite1-2/+2
Rename ELF_MACHINE to be PPC specific. This is used as-is by the various PPC bootloaders and is locally defined to ELF_MACHINE in linux user in PPC specific ifdeffery. This removes another architecture specific definition from the global namespace (as desired by multi-arch). Cc: Alexander Graf <agraf@suse.de> Cc: qemu-ppc@nongnu.org Reviewed-by: Richard Henderson <rth@twiddle.net> Acked-By: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-23ppc/spapr: Implement H_RANDOM hypercall in QEMUThomas Huth1-0/+8
The PAPR interface defines a hypercall to pass high-quality hardware generated random numbers to guests. Recent kernels can already provide this hypercall to the guest if the right hardware random number generator is available. But in case the user wants to use another source like EGD, or QEMU is running with an older kernel, we should also have this call in QEMU, so that guests that do not support virtio-rng yet can get good random numbers, too. This patch now adds a new pseudo-device to QEMU that either directly provides this hypercall to the guest or is able to enable the in-kernel hypercall if available. The in-kernel hypercall can be enabled with the use-kvm property, e.g.: qemu-system-ppc64 -device spapr-rng,use-kvm=true For handling the hypercall in QEMU instead, a "RngBackend" is required since the hypercall should provide "good" random data instead of pseudo-random (like from a "simple" library function like rand() or g_random_int()). Since there are multiple RngBackends available, the user must select an appropriate back-end via the "rng" property of the device, e.g.: qemu-system-ppc64 -object rng-random,filename=/dev/hwrng,id=gid0 \ -device spapr-rng,rng=gid0 ... See http://wiki.qemu-project.org/Features-Done/VirtIORNG for other example of specifying RngBackends. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23ppc/spapr: Fix buffer overflow in spapr_populate_drconf_memory()Thomas Huth1-3/+6
The buffer that is allocated in spapr_populate_drconf_memory() is used for setting both, the "ibm,dynamic-memory" and the "ibm,associativity-lookup-arrays" property. However, only the size of the first one is taken into account when allocating the memory. So if the length of the second property is larger than the length of the first one, we run into a buffer overflow here! Fix it by taking the length of the second property into account, too. Fixes: "spapr: Support ibm,dynamic-reconfiguration-memory" patch Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Fix default NUMA node allocation for threadsDavid Gibson1-0/+8
At present, if guest numa nodes are requested, but the cpus in each node are not specified, spapr just uses the default behaviour or assigning each vcpu round-robin to nodes. If smp_threads != 1, that will assign adjacent threads in a core to different NUMA nodes. As well as being just weird, that's a configuration that can't be represented in the device tree we give to the guest, which means the guest and qemu end up with different ideas of the NUMA topology. This patch implements mc->cpu_index_to_socket_id in the spapr code to make sure vcpus get assigned to nodes only at the socket granularity. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2015-09-23spapr: Move memory hotplug to RTAS_LOG_V6_HP_ID_DRC_COUNT typeBharata B Rao1-1/+1
Till now memory hotplug used RTAS_LOG_V6_HP_ID_DRC_INDEX hotplug type which meant that we generated one hotplug type of EPOW event for every 256MB (SPAPR_MEMORY_BLOCK_SIZE). This quickly overruns the kernel rtas log buffer thus resulting in loss of memory hotplug events. Switch to RTAS_LOG_V6_HP_ID_DRC_COUNT hotplug type for memory so that we generate only one event per hotplug request. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Support hotplug by specifying DRC countBharata B Rao1-1/+1
Support hotplug identifier type RTAS_LOG_V6_HP_ID_DRC_COUNT that allows hotplugging of DRCs by specifying the DRC count. While we are here, rename spapr_hotplug_req_add_event() to spapr_hotplug_req_add_by_index() spapr_hotplug_req_remove_event() to spapr_hotplug_req_remove_by_index() so that they match with spapr_hotplug_req_add_by_count(). Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Revert to memory@XXXX representation for non-hotplugged memoryBharata B Rao1-38/+9
Don't represent non-hotluggable memory under drconf node. With this we don't have to create DRC objects for them. The effect of this patch is that we revert back to memory@XXXX representation for all the memory specified with -m option and represent the cold plugged memory and hot-pluggable memory under ibm,dynamic-reconfiguration-memory. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Populate ibm,associativity-lookup-arrays correctly for non-NUMABharata B Rao1-2/+3
When NUMA isn't configured explicitly, assume node 0 is present for the purpose of creating ibm,associativity-lookup-arrays property under ibm,dynamic-reconfiguration-memory DT node. This ensures that the associativity index property is correctly updated in ibm,dynamic-memory for the LMB that is hotplugged. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Provide better error message when slots exceed max allowedBharata B Rao1-2/+2
Currently when user specifies more slots than allowed max of SPAPR_MAX_RAM_SLOTS (32), we error out like this: qemu-system-ppc64: unsupported amount of memory slots: 64 Let the user know about the max allowed slots like this: qemu-system-ppc64: Specified number of memory slots 64 exceeds max supported 32 Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Don't allow memory hotplug to memory less nodesBharata B Rao1-1/+23
Currently PowerPC kernel doesn't allow hot-adding memory to memory-less node, but instead will silently add the memory to the first node that has some memory. This causes two unexpected behaviours for the user. - Memory gets hotplugged to a different node than what the user specified. - Since pc-dimm subsystem in QEMU still thinks that memory belongs to memory-less node, a reboot will set things accordingly and the previously hotplugged memory now ends in the right node. This appears as if some memory moved from one node to another. So until kernel starts supporting memory hotplug to memory-less nodes, just prevent such attempts upfront in QEMU. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Memory hotplug supportBharata B Rao1-0/+118
Make use of pc-dimm infrastructure to support memory hotplug for PowerPC. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Make hash table size a factor of maxram_sizeBharata B Rao1-1/+1
The hash table size is dependent on ram_size, but since with hotplug the memory can grow till maxram_size. Hence make hash table size dependent on maxram_size. This allows to hotplug huge amounts of memory to the guest. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Support ibm,dynamic-reconfiguration-memoryBharata B Rao1-43/+167
Parse ibm,architecture.vec table obtained from the guest and enable memory node configuration via ibm,dynamic-reconfiguration-memory if guest supports it. This is in preparation to support memory hotplug for sPAPR guests. This changes the way memory node configuration is done. Currently all memory nodes are built upfront. But after this patch, only memory@0 node for RMA is built upfront. Guest kernel boots with just that and rest of the memory nodes (via memory@XXX or ibm,dynamic-reconfiguration-memory) are built when guest does ibm,client-architecture-support call. Note: This patch needs a SLOF enhancement which is already part of SLOF binary in QEMU. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Add LMB DR connectorsDavid Gibson1-0/+87
Enable memory hotplug for pseries 2.4 and add LMB DR connectors. With memory hotplug, enforce RAM size, NUMA node memory size and maxmem to be a multiple of SPAPR_MEMORY_BLOCK_SIZE (256M) since that's the granularity in which LMBs are represented and hot-added. LMB DR connectors will be used by the memory hotplug code. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> [spapr_drc_reset implementation] [since this missed the 2.4 cutoff, changing to only enable for 2.5] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Use QEMU limit for maximum CPUs numberAlexey Kardashevskiy1-4/+2
sPAPR uses hard coded limit of maximum 255 supported CPUs which is exactly the same as QEMU-wide limit which is MAX_CPUMASK_BITS and also defined as 255. This makes use of a global CPU number limit for the "pseries" machine. In order to anticipate future increase of the MAX_CPUMASK_BITS (or to help debugging large systems), this also bumps the FDT_MAX_SIZE limit from 256K to 1M assuming that 1 CPU core needs roughly 512 bytes in the device tree so the new limit can cover up to 2048 CPU cores. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Initialize hotplug memory address spaceBharata B Rao1-0/+18
Initialize a hotplug memory region under which all the hotplugged memory is accommodated. Also enable memory hotplug by setting CONFIG_MEM_HOTPLUG. Modelled on i386 memory hotplug. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Enable in-kernel H_SET_MODE handlingAlexey Kardashevskiy1-0/+1
For setting debug watchpoints, sPAPR guests use H_SET_MODE hypercall. The existing QEMU H_SET_MODE handler does not support this but the KVM handler in HV KVM does. However it is not enabled. This enables the in-kernel H_SET_MODE handler which handles: - Completed Instruction Address Breakpoint Register - Watch point 0 registers. The rest is still handled in QEMU. Reported-by: Anton Blanchard <anton@samba.org> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23pseries: Fix incorrect calculation of threads per socket for chip-idDavid Gibson1-4/+2
The device tree presented to pseries machine type guests includes an ibm,chip-id property which gives essentially the socket number of each vcpu core (individual vcpu threads don't get a node in the device tree). To calculate this, it uses a vcpus_per_socket variable computed as (smp_cpus / #sockets). This is correct for the usual case where smp_cpus == smp_threads * smp_cores * #sockets. However, you can start QEMU with the number of cores and threads mismatching the total number of vcpus (whether that _should_ be permitted is a topic for another day). It's a bit hard to say what the "real" number of vcpus per socket here is, but for most purposes (smp_threads * smp_cores) will more meaningfully match how QEMU behaves with respect to socket boundaries. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2015-09-23spapr: add dumpdtb supportAndrew Jones1-0/+2
dumpdtb (-machine dumpdtb=<file>) allows one to inspect the generated device tree of machine types that generate device trees. This is useful for a) seeing what's there b) debugging/testing device tree generator patches. It can be used as follows $QEMU_CMDLINE -machine dumpdtb=dtb dtc -I dtb -O dts dtb Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Add /rtas/ibm,change-msix-capableSam Bobroff1-0/+4
QEMU is MSI-X capable and makes it available via ibm,change-msi, so we should indicate this by adding /rtas/ibm,change-msix-capable to the device tree. This is specificed by PAPR. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Add /ibm,partition-nameSam Bobroff1-0/+5
QEMU has a notion of the guest name, so if it's present we might as well put that into the device tree as /ibm,partition-name. This is specificed by PAPR. Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Create pseries-2.5 machineDavid Gibson1-1/+18
Add pseries-2.5 machine version. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> [Altered to merge before memory hotplug -- dwg] [Altered to work with b9f072d01 -- dwg] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-23spapr: Provide an error message when migration fails due to htab_shift mismatchBharata B Rao1-0/+2
Include an error message when migration fails due to mismatch in htab_shift values at source and target. This should provide a bit more verbose message in addition to the current migration failure message that reads like: qemu-system-ppc64: error while loading state for instance 0x0 of device 'spapr/htab' After this patch, the failure message will look like this: qemu-system-ppc64: htab_shift mismatch: source 29 target 24 qemu-system-ppc64: error while loading state for instance 0x0 of device 'spapr/htab' Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-09-19machine: Set MachineClass::name automaticallyEduardo Habkost1-4/+0
Now all TYPE_MACHINE subclasses use MACHINE_TYPE_NAME to generate the class name. So instead of requiring each subclass to set MachineClass::name manually, we can now set it automatically at the TYPE_MACHINE class_base_init() function. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> [AF/ehabkost: Updated for s390-ccw machines] [AF: Cleanup of intermediate virt and vexpress name handling] Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-09-19pseries: Rename machine class names to use MACHINE_TYPE_NAMEEduardo Habkost1-4/+4
Machine class names should use the "-machine" suffix to allow class-name-based machine class lookup to work. Rename the the pseries machine classes using the MACHINE_TYPE_NAME macro. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-08-13pci: allow 0 address for PCI IO/MEM regionsLaurent Vivier1-0/+1
Some kernels program a 0 address for io regions. PCI 3.0 spec section 6.2.5.1 doesn't seem to disallow this. based on patch by Michael Roth <mdroth@linux.vnet.ibm.com> Add pci_allow_0_addr in MachineClass to conditionally allow addr 0 for pseries, as this can break other architectures. This patch allows to hotplug PCI card in pseries machine, as the first added card BAR0 is always set to 0 address. This as a temporary hack, waiting to fix PCI memory priorities for more machine types... Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-07Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' ↵Peter Maydell1-212/+238
into staging Patch queue for ppc - 2015-07-07 A few last minute PPC changes for 2.4: - spapr: Update SLOF - spapr: Fix a few bugs - spapr: Preparation for hotplug - spapr: Minor code cleanups - linux-user: Add mftb handling - kvm: Enable hugepage support with memory-backend-file - mac99: Remove nonexistent interrupt pin (Mac OS 9 fix) # gpg: Signature made Tue Jul 7 16:48:41 2015 BST using RSA key ID 03FEDC60 # gpg: Good signature from "Alexander Graf <agraf@suse.de>" # gpg: aka "Alexander Graf <alex@csgraf.de>" * remotes/agraf/tags/signed-ppc-for-upstream: (30 commits) sPAPR: Clear stale MSIx table during EEH reset sPAPR: Reenable EEH functionality on reboot sPAPR: Don't enable EEH on emulated PCI devices spapr-vty: Use TYPE_ definition instead of hardcoding spapr_vty: lookup should only return valid VTY objects spapr_pci: drop redundant args in spapr_[populate, create]_pci_child_dt spapr_pci: populate ibm,loc-code spapr_pci: enumerate and add PCI device tree xics_kvm: Don't enable KVM_CAP_IRQ_XICS if already enabled ppc: Update cpu_model in MachineState spapr: Consolidate cpu init code into a routine spapr: Reorganize CPU dt generation code cpus: Add a macro to walk CPUs in reverse spapr: Support ibm, lrdr-capacity device tree property spapr: Consider max_cpus during xics initialization Revert "hw/ppc/spapr_pci.c: Avoid functions not in glib 2.12 (g_hash_table_iter_*)" spapr_iommu: translate sPAPRTCEAccess to IOMMUAccessFlags spapr_iommu: drop erroneous check in h_put_tce_indirect() spapr_pci: set device node unit address as hex spapr_pci: encode class code including Prog IF register ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-07ppc: Update cpu_model in MachineStateBharata B Rao1-4/+3
Keep cpu_model field in MachineState uptodate so that it can be used from the CPU hotplug path. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07spapr: Consolidate cpu init code into a routineBharata B Rao1-25/+29
Factor out bits of sPAPR specific CPU initialization code into a separate routine so that it can be called from CPU hotplug path too. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07spapr: Reorganize CPU dt generation codeBharata B Rao1-125/+159
Reorganize CPU device tree generation code so that it be reused from hotplug path. CPU dt entries are now generated from spapr_finalize_fdt() instead of spapr_create_fdt_skel(). Note: This is how the split-up looks like now: Boot path --------- spapr_finalize_fdt spapr_populate_cpus_dt_node spapr_populate_cpu_dt spapr_fixup_cpu_numa_dt spapr_fixup_cpu_smt_dt ibm,cas path ------------ spapr_h_cas_compose_response spapr_fixup_cpu_dt spapr_fixup_cpu_numa_dt spapr_fixup_cpu_smt_dt Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07spapr: Consider max_cpus during xics initializationBharata B Rao1-2/+2
Use max_cpus instead of smp_cpus when intializating xics system. Also report max_cpus in ibm,interrupt-server-ranges device tree property of interrupt controller node. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07spapr: Add sPAPRMachineClassDavid Gibson1-0/+1
Currently although we have an sPAPRMachineState descended from MachineState we don't have an sPAPRMAchineClass descended from MachineClass. So far it hasn't been needed, but several upcoming features are going to want it, so this patch creates a stub implementation. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07spapr: Remove obsolete entry_point field from sPAPRMachineStateDavid Gibson1-3/+1
The sPAPRMachineState structure includes an entry_point field containing the initial PC value for starting the machine, even though this always has the value 0x100. I think this is a hangover from very early versions which bypassed the firmware when using -kernel. In any case it has no function now, so remove it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07spapr: Remove obsolete ram_limit field from sPAPRMachineStateDavid Gibson1-10/+12
The ram_limit field was imported from sPAPREnvironment where it predates the machine's ram size being available generically from machine->ram_size. Worse, the existing code was inconsistent about where it got the ram size from. Sometimes it used spapr->ram_limit, sometimes the global 'ram_size' and sometimes a local 'ram_size' masking the global. This cleans up the code to consistently use machine->ram_size, eliminating spapr->ram_limit in the process. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07spapr: Merge sPAPREnvironment into sPAPRMachineStateDavid Gibson1-43/+30
The code for -machine pseries maintains a global sPAPREnvironment structure which keeps track of general state information about the guest platform. This predates the existence of the MachineState structure, but performs basically the same function. Now that we have the generic MachineState, fold sPAPREnvironment into sPAPRMachineState, the pseries specific subclass of MachineState. This is mostly a matter of search and replace, although a few places which relied on the global spapr variable are changed to find the structure via qdev_get_machine(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07spapr: ensure we have at least one XICS serverGreg Kurz1-1/+2
XICS needs to know the upper value for cpu_index as it is used to compute the number of servers: smp_cpus * kvmppc_smt_threads() / smp_threads When passing -smp cpus=1,threads=9 on a POWER8 host, we end up with: 1 * 8 / 9 = 0 ... which leads to an assertion in both emulated: Number of servers needs to be greater 0 Aborted (core dumped) ... and in-kernel XICS: xics_kvm_realize: Assertion `icp->nr_servers' failed. Aborted (core dumped) With this patch, we are sure that nr_servers > 0. Passing the same bogus -smp option then leads to: qemu-system-ppc64: Cannot support more than 8 threads on PPC with KVM ... which is a lot more explicit than the XICS errors. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-07-07global_state: Make section optionalJuan Quintela1-0/+1
This section would be sent: a- for all new machine types b- for old machine types if section state is different form {running,paused} that were the only giving us troubles. So, in new qemus: it is alwasy there. In old qemus: they are only there if it an error has happened, basically stoping on target. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-07-07Fix older machine type compatibility on power with section footersDr. David Alan Gilbert1-0/+2
I forgot to add compatibility for Power when adding section footers. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixes: 37fb569c0198cba58e3e Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-03pseries: Enable in-kernel H_LOGICAL_CI_{LOAD, STORE} implementationsDavid Gibson1-0/+5
qemu currently implements the hypercalls H_LOGICAL_CI_LOAD and H_LOGICAL_CI_STORE as PAPR extensions. These are used by the SLOF firmware for IO, because performing cache inhibited MMIO accesses with the MMU off (real mode) is very awkward on POWER. This approach breaks when SLOF needs to access IO devices implemented within KVM instead of in qemu. The simplest example would be virtio-blk using an iothread, because the iothread / dataplane mechanism relies on an in-kernel implementation of the virtio queue notification MMIO. To fix this, an in-kernel implementation of these hypercalls has been made, (kernel commit 99342cf "kvmppc: Implement H_LOGICAL_CI_{LOAD,STORE} in KVM" however, the hypercalls still need to be enabled from qemu. This performs the necessary calls to do so. It would be nice to provide some warning if we encounter a problematic device with a kernel which doesn't support the new calls. Unfortunately, I can't see a way to detect this case which won't either warn in far too many cases that will probably work, or which is horribly invasive. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-03spapr: override default ram size to 512MBNikunj A Dadhania1-0/+1
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.1 at 2025-02-01 03:47:22 +0000