aboutsummaryrefslogtreecommitdiff
path: root/hw/ppc/ppc405.h
AgeCommit message (Collapse)AuthorFilesLines
2022-10-17ppc4xx_sdram: QOM'ifyBALATON Zoltan1-2/+1
Change the ppc4xx_sdram model to a QOM class derived from the PPC4xx-dcr-device and name it ppc4xx-sdram-ddr. This is mostly modelling the DDR SDRAM controller found in the 440EP (used on the bamboo board) but also backward compatible with the older DDR controllers on some 405 SoCs so we also use it for those now. This likely does not cause problems for guests we run as the new features are just not accessed but to model 405 SoC accurately some features may have to be disabled or the model split between 440 and older. Newer SoCs (regardless of their PPC core, e.g. 405EX) may have an updated DDR2 SDRAM controller implemented by the ppc440_sdram model (only partially, enough for the 460EX on the sam460ex) that is not yet QOM'ified in this patch. That is intended to become ppc4xx-sdram-ddr2 when QOM'ified later. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <8f820487fc9011343032c422ecdf3e8ee74d8c11.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17ppc4xx_sdram: Move size check to ppc4xx_sdram_init()BALATON Zoltan1-2/+0
Instead of checking if memory size is valid in board code move this check to ppc4xx_sdram_init() as this is a restriction imposed by the SDRAM controller. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <39e5129dd095b285676a6267c5753786da1bc30d.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17ppc4xx: Use Ppc4xxSdramBank in ppc4xx_sdram_banks()BALATON Zoltan1-3/+1
Change ppc4xx_sdram_banks() to take one Ppc4xxSdramBank array instead of the separate arrays and adjust ppc4xx_sdram_init() and ppc440_sdram_init() accordingly as well as machines using these. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <e3a1fea51f29779fd6a61be90a29c684f3299544.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-10-17ppc4xx_sdram: Get rid of the init RAM hackBALATON Zoltan1-1/+0
The do_init parameter of ppc4xx_sdram_init() is used to map memory regions that is normally done by the firmware by programming the SDRAM controller. Do this from board code emulating what firmware would do when booting a kernel directly from -kernel without a firmware so we can get rid of this do_init hack. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <d6c44c870befa1a075e21f1a59926dcdaff63f6b.1664021647.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc405: Move machine specific code to ppc405_boards.cBALATON Zoltan1-38/+0
These are only used by the board code so move out from the shared SoC model and put it in the boards file. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <2b23bcaaf191f96b217cbd06a6038694024862c3.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: Use an explicit I2C objectCédric Le Goater1-0/+2
Having an explicit I2C model object will help if one day we want to add I2C devices on the bus from the machine init routine. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> [balaton: Symplify sysbus device casts for readibility] Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <68eb8b5ac408ca8cc981ebf53a3e154c0d34c7f6.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: Use an embedded PPCUIC model in SoC stateCédric Le Goater1-1/+2
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> [balaton: Simplify sysbus device casts for readability] Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <ac5f010f4eb3ade061c65bc39a049f231f75574a.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc4xx: Rename ppc405-ebc to ppc4xx-ebcBALATON Zoltan1-1/+1
This device is shared between different 4xx socs. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <63d9b14c8ff5f73e35bffca1036394b5235735ee.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc4xx: Move EBC model to ppc4xx_devs.cBALATON Zoltan1-15/+0
The EBC is shared between 405 and 440 so move it to shared file. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <10eae70509ca4bd74858fc2c0a0f0e4eb9330199.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc4xx: Rename ppc405-plb to ppc4xx-plbBALATON Zoltan1-1/+1
This device is shared between different 4xx socs. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <5b13ebfd12a71a28035bed5a915cbeee81cf21d1.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc4xx: Move PLB model to ppc4xx_devs.cBALATON Zoltan1-11/+0
The PLB is shared between 405 and 440 so move it to the shared file. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <2498384bf3e18959ee8cb984d72fb66b8a6ecadc.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: QOM'ify MALCédric Le Goater1-0/+1
The Memory Access Layer (MAL) controller is currently modeled as a DCR device with 4 IRQs. Also drop the ppc4xx_mal_init() helper and adapt the sam460ex machine. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> [balaton: ppc4xx_dcr_register changes, add finalize method] Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <d54a243dff94d95ba30dbcc09c27700a90ade932.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: QOM'ify PLBCédric Le Goater1-2/+12
PLB is currently modeled as a simple DCR device. Also drop the ppc4xx_plb_init() helper and adapt the sam460ex machine. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> [balaton: ppc4xx_dcr_register changes] Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <c4256d1bffca86fe1d696aa9c56732e5f563e114.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: QOM'ify POBCédric Le Goater1-0/+12
POB is currently modeled as a simple DCR device. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> [balaton: ppc4xx_dcr_register changes] Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <2bb1a89182523059ecb0e8d20c22a293534dec17.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: QOM'ify OPBACédric Le Goater1-0/+12
The OPB arbitrer is currently modeled as a simple SysBus device with a unique memory region. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> [balaton: ppc4xx_dcr_register changes] Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <38476bc43d2332db2f09dbede9eff5234d6ce217.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: QOM'ify EBCCédric Le Goater1-1/+16
EBC is currently modeled as a DCR device. Also drop the ppc405_ebc_init() helper and adapt the sam460ex machine. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> [balaton: ppc4xx_dcr_register changes] Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <51a0769ab605c5158f4f2f1c896725d5fe7a073b.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: QOM'ify DMACédric Le Goater1-0/+19
The DMA controller is currently modeled as a DCR device with a couple of IRQs. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> [balaton: ppc4xx_dcr_register changes] Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <4738b3c7cf18c328f05aaaddc555a46219431335.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: QOM'ify GPIOCédric Le Goater1-0/+21
The GPIO controller is currently modeled as a simple SysBus device with a unique memory region. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> [balaton: Simplify sysbus device casts for readability] Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <e95d7849f3768e1f9a2846c4b282392750678b3e.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: QOM'ify OCMCédric Le Goater1-0/+16
The OCM controller is currently modeled as a simple DCR device with a couple of memory regions. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> [balaton: ppc4xx_dcr_register changes] Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <ecb93d2d5993bb7a970365744c7d342d4abcb017.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: QOM'ify GPTCédric Le Goater1-0/+22
The GPT controller is currently modeled as a SysBus device with a unique memory region, a couple of IRQs and a timer. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> [balaton: ppc4xx_dcr_register changes, add finalize method] Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <8950ab26e78173f94ba65bc61bcfd0631de1fe61.1660746880.git.balaton@eik.bme.hu> [danielhb: check if timer != NULL in ppc405_gpt_finalize()] Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: QOM'ify CPCCédric Le Goater1-1/+34
The CPC controller is currently modeled as a DCR device. Now that all clock settings are handled at the CPC level, change the SoC "sys-clk" property to be an alias on the same property in the CPC model. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> [balaton: ppc4xx_dcr_register changes] Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <23393cb91a2c6c560a4461b3e9d1baa48ae28f74.1660746880.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: QOM'ify CPUCédric Le Goater1-1/+1
Drop the use of ppc4xx_init() and duplicate a bit of code related to clocks in the SoC realize routine. We will clean that up in the following patches. ppc_dcr_init() simply allocates default DCR handlers for the CPU. Maybe this could be done in model initializer of the CPU families needing it. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20220809153904.485018-8-clg@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: Start QOMification of the SoCCédric Le Goater1-7/+5
This moves all the code previously done in the ppc405ep_init() routine under ppc405_soc_realize(). We can also adjust the number of banks now that we have control on ppc4xx_sdram_init(). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20220809153904.485018-7-clg@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-08-31ppc/ppc405: Introduce a PPC405 SoCCédric Le Goater1-0/+16
It is an initial model to start QOMification of the PPC405 board. QOM'ified devices will be reintroduced one by one. Start with the memory regions, which name prefix is changed to "ppc405". Also, initialize only one RAM bank. The second bank is a dummy one (zero size) which is here to match the hard coded number of banks in ppc405ep_init(). Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20220809153904.485018-6-clg@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2021-12-17ppc/ppc405: Fix bi_pci_enetaddr2 field in U-Boot board informationCédric Le Goater1-1/+1
The board information for the 405EP first appeared in commit 04f20795ac81 ("Move PowerPC 405 specific definitions into a separate file ...") An Ethernet address is a 6 byte number. Fix that. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20211206103712.1866296-14-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-12-17ppc/ppc405: Introduce ppc405_set_default_bootinfo()Cédric Le Goater1-1/+1
This routine is a small helper to cleanup the code. The update of the flash fields were removed because there are not of any use when booting from a Linux kernel image. It should be functionally equivalent. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20211206103712.1866296-11-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-12-17ppc/ppc405: Add some address space definitionsCédric Le Goater1-0/+7
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20211206103712.1866296-8-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-12-17ppc/ppc405: Change ppc405ep_init() return valueCédric Le Goater1-1/+1
I will be useful to rework the boot from Linux. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20211206103712.1866296-7-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-12-17ppc/ppc405: Drop flag parameter in ppc405_set_bootinfo()Cédric Le Goater1-2/+1
It was introduced in commit b8d3f5d12642 ("Add flags to support PowerPC 405 bootinfos variations.") but since its value has always been set to '1'. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20211206103712.1866296-6-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-01-19hw/ppc/ppc405_uc: Drop use of ppcuic_init()Peter Maydell1-1/+1
Switch the ppc405_uc boards to directly creating and configuring the UIC, rather than doing it via the old ppcuic_init() helper function. We retain the API feature of ppc405ep_init() where it passes back something allowing the callers to wire up devices to the UIC if they need to, even though neither of the callsites currently makes use of this ability -- instead of passing back the qemu_irq array we pass back the UIC DeviceState. This fixes a trivial Coverity-detected memory leak where we were leaking the array of IRQs returned by ppcuic_init(). Fixes: Coverity CID 1421922 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210108171212.16500-4-peter.maydell@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-01-19hw/ppc: Delete unused ppc405cr_init() codePeter Maydell1-6/+0
The function ppc405cr_init() has apparently been unused since it was added in commit 8ecc7913525ecb in 2007. Remove this dead code, so we don't have to convert it away from using ppcuic_init(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210108171212.16500-3-peter.maydell@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-08ppc4xx: Export ECB and PLB emulationBALATON Zoltan1-0/+3
Make these device models available outside ppc405_uc.c for reuse in 460EX emulation. They are left in their current place for now because they are used mostly unchanged and I'm not sure these correctly model the components in 440 SoCs (but they seem to be good enough). These functions could be moved in a subsequent clean up series when this is confirmed. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-08ppc4xx_i2c: QOMifyBALATON Zoltan1-2/+0
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-08ppc4xx: Split off 4xx I2C emulation from ppc405_uc to its own fileBALATON Zoltan1-0/+2
This device appears in other SoCs as well not just in 405 ones and subsequent patches will modify it, so move it out of ppc405_uc.c in preparation Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-15Remove unused function declarationsLadi Prosek1-6/+0
Unused function declarations were found using a simple gcc plugin and manually verified by grepping the sources. Signed-off-by: Ladi Prosek <lprosek@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-07-12Clean up header guards that don't match their file nameMarkus Armbruster1-3/+3
Header guard symbols should match their file name to make guard collisions less likely. Offenders found with scripts/clean-header-guards.pl -vn. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2013-04-08hw: move private headers to hw/ subdirectories.Paolo Bonzini1-0/+81
Many headers are used only in a single directory. These can be kept in hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-07-28 04:31:17 +0000