aboutsummaryrefslogtreecommitdiff
path: root/hw/ppc/pnv_psi.c
AgeCommit message (Collapse)AuthorFilesLines
2023-09-29pnv/psi: Clean up local variable shadowingCédric Le Goater1-2/+3
to fix : ../hw/ppc/pnv_psi.c: In function ‘pnv_psi_p9_mmio_write’: ../hw/ppc/pnv_psi.c:741:24: warning: declaration of ‘addr’ shadows a parameter [-Wshadow=compatible-local] 741 | hwaddr addr = val & ~(PSIHB9_ESB_CI_VALID | PSIHB10_ESB_CI_64K); | ^~~~ ../hw/ppc/pnv_psi.c:702:56: note: shadowed declaration is here 702 | static void pnv_psi_p9_mmio_write(void *opaque, hwaddr addr, | ~~~~~~~^~~~ Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20230918145850.241074-3-clg@kaod.org> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2023-07-07pnv/psi: Initialize the PSIHB interrupts to match hardwareFrederic Barrat1-0/+2
On the powernv9 and powernv10 machines, the PSIHB interrupts are currently initialized with a PQ state of 0b01, i.e. interrupts are disabled. However real hardware initializes them to 0b00 for the PSIHB. This patch updates it, in case an hypervisor is in the mood of checking it. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20230703081215.55252-3-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-07-07pnv/psi: Allow access to PSI registers through xscomFrederic Barrat1-10/+21
skiboot only uses mmio to access the PSI registers (once the BAR is set) but we don't have any reason to block the accesses through xscom. This patch enables xscom access to the PSI registers. It converts the xscom addresses to mmio addresses, which requires a bit of care for the PSIHB, then reuse the existing mmio ops. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-ID: <20230630102609.193214-1-fbarrat@linux.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2023-01-20include/hw/ppc: Don't include hw/pci-host/pnv_phb.h from pnv.hMarkus Armbruster1-0/+1
The next commit needs to include hw/ppc/pnv.h from hw/pci-host/pnv_phb.h. Avoid an inclusion loop. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20221222104628.659681-4-armbru@redhat.com>
2022-04-20ppc/pnv: Remove useless checks in set_irq handlersCédric Le Goater1-10/+0
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220323072846.1780212-6-clg@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-04-20ppc/pnv: Remove PnvPsiClas::irq_setCédric Le Goater1-17/+6
All devices raising PSI interrupts are now converted to use GPIO lines and the pnv_psi_irq_set() routines have become useless. Drop them. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220323072846.1780212-5-clg@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-04-20ppc/pnv: Remove PnvLpcController::psi linkCédric Le Goater1-0/+10
Create an anonymous output GPIO line to connect the LPC device with the PSIHB device and raise the appropriate PSI IRQ line depending on the processor model. A temporary __pnv_psi_irq_set() routine is introduced to handle the transition. It will be removed when all devices raising PSI interrupts are converted to use GPIOs. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220323072846.1780212-3-clg@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-04-20ppc/pnv: Fix PSI IRQ definitionCédric Le Goater1-6/+3
On HW, the PSI and FSP interrupt levels are muxed under the same interrupt number. For coding reasons, an extra IRQ number was introduced to index register values in an array. It increased the count of IRQs which do not fit in the PSI IRQ range anymore. The PSI and FSP interrupts should be modeled with an extra level of GPIO lines but since QEMU does not support them, simply drop the extra number to stay within the IRQ range. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220323072846.1780212-2-clg@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2022-03-02ppc/xive: Add support for PQ state bits offloadCédric Le Goater1-2/+6
The trigger message coming from a HW source contains a special bit informing the XIVE interrupt controller that the PQ bits have been checked at the source or not. Depending on the value, the IC can perform the check and the state transition locally using its own PQ state bits. The following changes add new accessors to the XiveRouter required to query and update the PQ state bits. This only applies to the PowerNV machine. sPAPR accessors are provided but the pSeries machine should not be concerned by such complex configuration for the moment. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-03-02ppc/psi: Add support for StoreEOI and 64k ESB pages (POWER10)Cédric Le Goater1-6/+24
POWER10 adds support for StoreEOI operation and 64K ESB pages on PSIHB to be consistent with the other interrupt sources of the system. Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-05Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210504' ↵Peter Maydell1-2/+2
into staging ppc patch queue 2021-05-04 Here's the first ppc pull request for qemu-6.1. It has a wide variety of stuff accumulated during the 6.0 freeze. Highlights are: * Multi-phase reset cleanups for PAPR * Preliminary cleanups towards allowing !CONFIG_TCG for the ppc target * Cleanup of AIL logic and extension to POWER10 * Further improvements to handling of hot unplug failures on PAPR * Allow much larger numbers of CPU on pseries * Support for the H_SCM_HEALTH hypercall * Add support for the Pegasos II board * Substantial cleanup to hflag handling * Assorted minor fixes and cleanups # gpg: Signature made Tue 04 May 2021 06:52:39 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dg-gitlab/tags/ppc-for-6.1-20210504: (46 commits) hw/ppc/pnv_psi: Use device_cold_reset() instead of device_legacy_reset() hw/ppc/spapr_vio: Reset TCE table object with device_cold_reset() hw/intc/spapr_xive: Use device_cold_reset() instead of device_legacy_reset() target/ppc: removed VSCR from SPR registration target/ppc: Reduce the size of ppc_spr_t target/ppc: Clean up _spr_register et al target/ppc: Add POWER10 exception model target/ppc: rework AIL logic in interrupt delivery target/ppc: move opcode table logic to translate.c target/ppc: code motion from translate_init.c.inc to gdbstub.c spapr_drc.c: handle hotunplug errors in drc_unisolate_logical() spapr.h: increase FDT_MAX_SIZE spapr.c: do not use MachineClass::max_cpus to limit CPUs ppc: Rename current DAWR macros and variables target/ppc: POWER10 supports scv target/ppc: Fix POWER9 radix guest HV interrupt AIL behaviour docs/system: ppc: Add documentation for ppce500 machine roms/u-boot: Bump ppce500 u-boot to v2021.04 to fix broken pci support roms/Makefile: Update ppce500 u-boot build directory name ppc/spapr: Add support for implement support for H_SCM_HEALTH ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-04hw/ppc/pnv_psi: Use device_cold_reset() instead of device_legacy_reset()Peter Maydell1-2/+2
The pnv_psi.c code uses device_legacy_reset() for two purposes: * to reset itself from its qemu_register_reset() handler * to reset a XiveSource object it has Neither it nor the XiveSource have any qbuses, so the new device_cold_reset() function (which resets both the device and its child buses) is equivalent here to device_legacy_reset() and we can just switch to the new API. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210503151849.8766-4-peter.maydell@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth1-1/+0
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-11-15non-virt: Fix Lesser GPL version numberChetan Pant1-1/+1
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201016145346.27167-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-07-20ppc/pnv: Make PSI device types not user creatableGreg Kurz1-0/+1
QEMU aborts with -device pnv-psi-POWER8: $ qemu-system-ppc64 -device pnv-psi-POWER8 qemu-system-ppc64: hw/intc/xics.c:605: ics_realize: Assertion `ics->xics' failed. Aborted (core dumped) The Processor Service Interface Controller is an internal device. It should only be instantiated by the chip, which takes care of configuring the link required by the ICS object in the case of POWER8. It doesn't make sense for a user to specify it on the command line. Note that the PSI model for POWER8 was added 3 yrs ago but the devices weren't available on the command line because of a bug that was fixed by recent commit 2f35254aa0 ("pnv/psi: Correct the pnv-psi* devices not to be sysbus devices"). Fixes: 54f59d786c ("ppc/pnv: Add cut down PSI bridge model and hookup external interrupt") Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <159413975752.169116.5808968580649255382.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster1-8/+3
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10qom: Use returned bool to check for failure, Coccinelle partMarkus Armbruster1-2/+2
The previous commit enables conversion of foo(..., &err); if (err) { ... } to if (!foo(..., errp)) { ... } for QOM functions that now return true / false on success / error. Coccinelle script: @@ identifier fun = { object_apply_global_props, object_initialize_child_with_props, object_initialize_child_with_propsv, object_property_get, object_property_get_bool, object_property_parse, object_property_set, object_property_set_bool, object_property_set_int, object_property_set_link, object_property_set_qobject, object_property_set_str, object_property_set_uint, object_set_props, object_set_propv, user_creatable_add_dict, user_creatable_complete, user_creatable_del }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-29-armbru@redhat.com>
2020-07-10qom: Put name parameter before value / visitor parameterMarkus Armbruster1-5/+4
The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-10qdev: Use returned bool to check for qdev_realize() etc. failureMarkus Armbruster1-4/+2
Convert foo(..., &err); if (err) { ... } to if (!foo(..., &err)) { ... } for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their wrappers isa_realize_and_unref(), pci_realize_and_unref(), sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref(). Coccinelle script: @@ identifier fun = { isa_realize_and_unref, pci_realize_and_unref, qbus_realize, qdev_realize, qdev_realize_and_unref, sysbus_realize, sysbus_realize_and_unref, usb_realize_and_unref }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Nothing to convert there; skipped. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200707160613.848843-5-armbru@redhat.com>
2020-06-15qdev: Convert bus-less devices to qdev_realize() with CoccinelleMarkus Armbruster1-2/+2
All remaining conversions to qdev_realize() are for bus-less devices. Coccinelle script: // only correct for bus-less @dev! @@ expression errp; expression dev; @@ - qdev_init_nofail(dev); + qdev_realize(dev, NULL, &error_fatal); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(dev, true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
2020-06-15qom: Less verbose object_initialize_child()Markus Armbruster1-4/+2
All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-15pnv/psi: Correct the pnv-psi* devices not to be sysbus devicesMarkus Armbruster1-1/+1
pnv_chip_power8_instance_init() creates a "pnv-psi-POWER8" sysbus device in a way that leaves it unplugged. pnv_chip_power9_instance_init() and pnv_chip_power10_instance_init() do the same for "pnv-psi-POWER9" and "pnv-psi-POWER10", respectively. These devices aren't actually sysbus devices. Correct that. Cc: "Cédric Le Goater" <clg@kaod.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: qemu-ppc@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200609122339.937862-18-armbru@redhat.com>
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster1-1/+1
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-01-30add device_legacy_reset function to prepare for reset api changeDamien Hedde1-2/+2
Provide a temporary device_legacy_reset function doing what device_reset does to prepare for the transition with Resettable API. All occurrence of device_reset in the code tree are also replaced by device_legacy_reset. The new resettable API has different prototype and semantics (resetting child buses as well as the specified device). Subsequent commits will make the changeover for each call site individually; once that is complete device_legacy_reset() will be removed. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-2-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau1-1/+1
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-08pnv/psi: Consolidate some duplicated code in pnv_psi_realize()Greg Kurz1-7/+12
The proper way to do that would be to use device_class_set_parent_realize(), but defining a Pnv8PsiClass and a Pnv9PsiClass types with a parent_realize pointer adds a fair amount of code. Calling pnv_psi_realize() explicitely is fine for now. This should probably be achieved with a device realize hook in the PSI base class and device_class_set_parent_realize() in the children classes. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <157841476667.66386.13659183399113837990.stgit@bahia.tlslab.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-08pnv/psi: Add device reset hookGreg Kurz1-4/+11
And call it from a QEMU reset handler. This allows each PNV child class to override the reset hook if needed, eg. POWER8 doesn't but POWER9 does. The proper way to do that would be to use device_class_set_parent_reset(), but defining a Pnv8PsiClass and a Pnv9PsiClass types with a parent_reset pointer adds a fair amount of code. Calling pnv_psi_reset() explicitely is fine for now. A subsequent patch will consolidate the call to qemu_register_reset() in a single place. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <157841476035.66386.17838417527621752518.stgit@bahia.tlslab.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-08ppc/pnv: Introduce a "xics" property alias under the PSI modelCédric Le Goater1-9/+2
This removes the need of the intermediate link under PSI to pass the XICS link to the underlying ICSState object. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200106145645.4539-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Drop PnvPsiClass::chip_typeGreg Kurz1-3/+0
It isn't used anymore. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157623838530.360005.15470128760871845396.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Introduce PnvPsiClass::compatGreg Kurz1-14/+11
The Processor Service Interface (PSI) model has a chip_type class level attribute, which is used to generate the content of the "compatible" DT property according to the CPU type. Since the PSI model already has specialized classes for each supported CPU type, it seems cleaner to achieve this with QOM. Provide the content of the "compatible" property with a new class level attribute. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157623837974.360005.14706607446188964477.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: add a PSI bridge model for POWER10Cédric Le Goater1-1/+24
The POWER10 PSIHB controller is very similar to the one on POWER9. We should probably introduce a common PnvPsiXive object. The ESB page size should be changed to 64k when P10 support is ready. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191205184454.10722-5-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/psi: cleanup definitionsCédric Le Goater1-2/+5
Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191205184454.10722-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17xics: Link ICS_PROP_XICS property to ICSState::xics pointerGreg Kurz1-2/+1
The ICS object has both a pointer and an ICS_PROP_XICS property pointing to the XICS fabric. Confusing bugs could arise if these ever go out of sync. Change the property definition so that it explicitely sets the pointer. The property isn't optional : not being able to set the link is a bug and QEMU should rather abort than exit in this case. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157403283596.409804.17347207690271971987.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17xive: Link "xive" property to XiveSource::xive pointerGreg Kurz1-2/+1
The source object has both a pointer and a "xive" property pointing to the notifier object. Confusing bugs could arise if these ever go out of sync. Change the property definition so that it explicitely sets the pointer. The property isn't optional : not being able to set the link is a bug and QEMU should rather abort than exit in this case. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157383333227.165747.12901571295951957951.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-10-24ppc/pnv: Use address_space_stq_be() when triggering an interrupt from PSICédric Le Goater1-3/+12
Include the XIVE_TRIGGER_PQ bit in the trigger data which is how hardware signals to the IC that the PQ bits of the interrupt source have been checked. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191007084102.29776-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-10-04xics: Merge TYPE_ICS_BASE and TYPE_ICS_SIMPLE classesDavid Gibson1-1/+1
TYPE_ICS_SIMPLE is the only subtype of TYPE_ICS_BASE that's ever instantiated. The existence of different classes is mostly a hang over from when we (misguidedly) had separate subtypes for the KVM and non-KVM version of the device. There could be some call for an abstract base type for ICS variants that use a different representation of their state (PowerNV PHB3 might want this). The current split isn't really in the right place for that though. If we need this in future, we can re-implement it more in line with what we actually need. So, collapse the two classes together into just TYPE_ICS. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-10-04xics: Rename misleading ics_simple_*() functionsDavid Gibson1-2/+2
There are a number of ics_simple_*() functions that aren't actually specific to TYPE_XICS_SIMPLE at all, and are equally valid on TYPE_XICS_BASE. Rename them to ics_*() accordingly. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster1-1/+0
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16Include sysemu/reset.h a lot lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-03-19ppc/pnv: Fix variable size in pnv_psi_power9_irq_set()Greg Kurz1-1/+1
PSI registers are 64-bit. Spotted by Coverity: CID 1399704 Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155248884690.893204.5428179144527749023.stgit@bahia.lan> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a PSI bridge model for POWER9Cédric Le Goater1-2/+327
The PSI bridge on POWER9 is very similar to POWER8. The BAR is still set through XSCOM but the controls are now entirely done with MMIOs. More interrupts are defined and the interrupt controller interface has changed to XIVE. The POWER9 model is a first example of the usage of the notify() handler of the XiveNotifier interface, linking the PSI XiveSource to its owning device model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a PSI bridge class modelCédric Le Goater1-24/+55
To ease the introduction of the PSI bridge model for POWER9, abstract the POWER chip differences in a PnvPsi class model and introduce a specific Pnv8Psi type for POWER8. POWER8 interface to the interrupt controller is still XICS whereas POWER9 uses the new XIVE model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: psi: add a reset handlerCédric Le Goater1-0/+11
Reset all regs but keep the MMIO BAR enabled as it is at realize time. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-14-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: psi: add a PSIHB_REG macroCédric Le Goater1-2/+4
This is a simple helper to translate XSCOM addresses to MMIO addresses Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-13-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: fix logging primitives using OxCédric Le Goater1-2/+2
Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-12-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26hw/ppc: Use object_initialize_child for correct reference countingThomas Huth1-2/+2
Both functions, object_initialize() and object_property_add_child() increase the reference counter of the new object, so one of the references has to be dropped afterwards to get the reference counting right. Otherwise the child object will not be properly cleaned up when the parent gets destroyed. Thus let's use now object_initialize_child() instead to get the reference counting here right. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1550748288-30598-1-git-send-email-thuth@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-01-09pnv/psi: move the ICSState qemu_irq array under the PSI device modelCédric Le Goater1-3/+4
Future changes of the ICSState object will remove the qemu_irq array from under the interrupt controller model. Prepare ground for the PSI interrupt sources and introduce a new one directly under the PSI device model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.1 at 2024-12-26 04:45:06 +0000