aboutsummaryrefslogtreecommitdiff
path: root/hw/ppc/pnv_lpc.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-08ppc/pnv: Fix TypeInfo of PnvLpcController abstract classCédric Le Goater1-2/+1
It was missing the instance_size field. Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200822083920.2668930-1-clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-03-17hw/ppc/pnv: Fix typo in commentPhilippe Mathieu-Daudé1-1/+1
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200228123303.14540-1-philmd@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-20Avoid address_space_rw() with a constant is_write argumentPeter Maydell1-4/+4
The address_space_rw() function allows either reads or writes depending on the is_write argument passed to it; this is useful when the direction of the access is determined programmatically (as for instance when handling the KVM_EXIT_MMIO exit reason). Under the hood it just calls either address_space_write() or address_space_read_full(). We also use it a lot with a constant is_write argument, though, which has two issues: * when reading "address_space_rw(..., 1)" this is less immediately clear to the reader as being a write than "address_space_write(...)" * calling address_space_rw() bypasses the optimization in address_space_read() that fast-paths reads of a fixed length This commit was produced with the included Coccinelle script scripts/coccinelle/exec_rw_const.cocci. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20200218112457.22712-1-peter.maydell@linaro.org> [PMD: Update macvm_set_cr0() reported by Laurent Vivier] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-02ppc/pnv: change the PowerNV machine devices to be non user creatableCédric Le Goater1-0/+1
The PowerNV machine emulates an OpenPOWER system and the PowerNV chip devices are models of the internal logic of the POWER processor. They can not be instantiated by the user on the QEMU command line. The PHB3/PHB4 devices could be an exception in the future after some rework on how the device tree is built. For the moment, exclude them also. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200129113720.7404-1-clg@kaod.org> Tested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-02ppc/pnv: Add support for "hostboot" modeCédric Le Goater1-1/+4
When the "hb-mode" option is activated on the powernv machine, the firmware is mapped at 0x8000000 and the HRMOR of the HW threads are set to the same address. The PNOR mapping on the FW address space of the LPC bus is left enabled to let the firmware load any other images required to boot the host. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200127144154.10170-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau1-1/+1
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17ppc/pnv: add a LPC Controller model for POWER10Cédric Le Goater1-8/+22
Same a POWER9, only the MMIO window changes. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191205184454.10722-6-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Add HIOMAP commandsCédric Le Goater1-0/+13
This activates HIOMAP support on the QEMU PowerNV machine. The PnvPnor model is used to access the flash contents. The model simply maps the contents at a fix offset and enables or disables the mapping. HIOMAP Protocol description : https://github.com/openbmc/hiomapd/blob/master/Documentation/protocol.md Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191028070027.22752-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Add a LPC "ranges" propertyCédric Le Goater1-1/+13
And fix a typo in the MEM address space definition. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191118091908.15044-1-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17ppc/pnv: Link "psi" property to PnvLpc::psi pointerGreg Kurz1-11/+8
The LPC object has both a pointer and a "psi" property pointing to the PSI object. Confusing bugs could arise if these ever go out of sync. Change the property definition so that it explicitely sets the pointer. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <157383334342.165747.3159314903077305653.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster1-1/+0
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-03-12ppc/pnv: add SerIRQ routing registersCédric Le Goater1-0/+14
This is just a simple reminder that SerIRQ routing should be addressed. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-8-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a LPC Controller model for POWER9Cédric Le Goater1-0/+200
The LPC Controller on POWER9 is very similar to the one found on POWER8 but accesses are now done via on MMIOs, without the XSCOM and ECCB logic. The device tree is populated differently so we add a specific POWER9 routine for the purpose. SerIRQ routing is yet to be done. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-7-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: add a LPC Controller class modelCédric Le Goater1-24/+61
It will ease the introduction of the LPC Controller model for POWER9. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190307223548.20516-5-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: lpc: fix OPB address rangesCédric Le Goater1-3/+4
The PowerNV LPC Controller exposes different sets of registers for each of the functional units it encompasses, among which the OPB (On-Chip Peripheral Bus) Master and Arbitrer and the LPC HOST Controller. The mapping addresses of each register range are correct but the sizes are too large. Fix the sizes and define the OPB Arbitrer range to fill the gap between the OPB Master registers and the LPC HOST Controller registers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190307223548.20516-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12ppc/pnv: fix logging primitives using OxCédric Le Goater1-5/+5
Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20190306085032.15744-12-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-11-08ppc/pnv: check size before data buffer accessPrasad J Pandit1-1/+7
While performing PowerNV memory r/w operations, the access length 'sz' could exceed the data[4] buffer size. Add check to avoid OOB access. Reported-by: Moguofang <moguofang@huawei.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-21ppc/pnv: introduce a new isa_create() operation to the chip modelCédric Le Goater1-5/+25
This moves the details of the ISA bus creation under the LPC model but more important, the new PnvChip operation will let us choose the chip class to use when we introduce the different chip classes for Power9 and Power8. It hides away the processor chip controllers from the machine. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-12ppc/pnv: fix LPC HC firmware address spaceCédric Le Goater1-1/+3
A specific MemoryRegion is required for the LPC HC Firmware address space. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-05-20Remove unnecessary variables for function return valueLaurent Vivier1-12/+4
Re-run Coccinelle script scripts/coccinelle/return_directly.cocci Signed-off-by: Laurent Vivier <lvivier@redhat.com> ppc part Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-01-10target/ppc: more use of the PPC_*() macrosCédric Le Goater1-5/+5
Also introduce utilities to manipulate bitmasks (originaly from OPAL) which be will be used in the model of the XIVE interrupt controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-10ppc/pnv: change powernv_ prefix to pnv_ for overall naming consistencyCédric Le Goater1-3/+3
The 'pnv' prefix is now used for all and the routines populating the device tree start with 'pnv_dt'. The handler of the PnvXScomInterface is also renamed to 'dt_xscom' which should reflect that it is populating the device tree under the 'xscom@' node of the chip. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26ppc/pnv: enable only one LPC busCédric Le Goater1-9/+0
The default LPC bus of a multichip system is on chip 0. It's recognized by the firmware (skiboot) using a "primary" property in the device tree. We introduce a pnv_chip_lpc_offset() routine to locate the LPC node of a chip and set the property directly from the machine level. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26ppc/pnv: Add support for POWER8+ LPC ControllerBenjamin Herrenschmidt1-2/+95
It adds the Naples chip which supports proper LPC interrupts via the LPC controller rather than via an external CPLD. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.9 - ported on latest PowerNV patchset - moved the IRQ handler in pnv_lpc.c - introduced pnv_lpc_isa_irq_create() to create the ISA IRQs ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-12-20Move target-* CPU file into a target/ folderThomas Huth1-1/+1
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: Thomas Huth <thuth@redhat.com>
2016-11-15ppc/pnv: fix compile breakage on old gccCédric Le Goater1-1/+2
PnvChip is defined twice and this can confuse old compilers : CC ppc64-softmmu/hw/ppc/pnv_xscom.o In file included from qemu.git/hw/ppc/pnv.c:29: qemu.git/include/hw/ppc/pnv.h:60: error: redefinition of typedef ‘PnvChip’ qemu.git/include/hw/ppc/pnv_xscom.h:24: note: previous declaration of ‘PnvChip’ was here make[1]: *** [hw/ppc/pnv.o] Error 1 make[1]: *** Waiting for unfinished jobs.... Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28ppc/pnv: add a LPC controllerBenjamin Herrenschmidt1-0/+471
The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.1 at 2024-11-03 10:27:06 +0000