aboutsummaryrefslogtreecommitdiff
path: root/hw/pci
AgeCommit message (Collapse)AuthorFilesLines
2022-01-07pcie_aer: Don't trigger a LSI if none are definedFrederic Barrat1-1/+3
Skip triggering an LSI when the AER root error status is updated if no LSI is defined for the device. We can have a root bridge with no LSI, MSI and MSI-X defined, for example on POWER systems. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Message-Id: <20211116170133.724751-4-fbarrat@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
2022-01-07pci: Export the pci_intx() functionFrederic Barrat1-5/+0
Move the pci_intx() definition to the PCI header file, so that it can be called from other PCI files. It is used by the next patch. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Message-Id: <20211116170133.724751-3-fbarrat@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
2022-01-07trace-events,pci: unify trace events formatLaurent Vivier3-8/+10
Unify format used by trace_pci_update_mappings_del(), trace_pci_update_mappings_add(), trace_pci_cfg_write() and trace_pci_cfg_read() to print the device name and bus number, slot number and function number. For instance: pci_cfg_read virtio-net-pci 00:0 @0x20 -> 0xffffc00c pci_cfg_write virtio-net-pci 00:0 @0x20 <- 0xfea0000c pci_update_mappings_del d=0x555810b92330 01:00.0 4,0xffffc000+0x4000 pci_update_mappings_add d=0x555810b92330 01:00.0 4,0xfea00000+0x4000 becomes pci_cfg_read virtio-net-pci 01:00.0 @0x20 -> 0xffffc00c pci_cfg_write virtio-net-pci 01:00.0 @0x20 <- 0xfea0000c pci_update_mappings_del virtio-net-pci 01:00.0 4,0xffffc000+0x4000 pci_update_mappings_add virtio-net-pci 01:00.0 4,0xfea00000+0x4000 Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20211105192541.655831-1-lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-29Fix bad overflow check in hw/pci/pcie.cDaniella Lee1-2/+2
Orginal qemu commit hash:14d02cfbe4adaeebe7cb833a8cc71191352cf03b In function pcie_add_capability, an assert contains the "offset < offset + size" expression. Both variable offset and variable size are uint16_t, the comparison is always true due to type promotion. The next expression may be the same. It might be like this: Thread 1 "qemu-system-x86" hit Breakpoint 1, pcie_add_capability ( dev=0x555557ce5f10, cap_id=1, cap_ver=2 '\002', offset=256, size=72) at ../hw/pci/pcie.c:930 930 { (gdb) n 931 assert(offset >= PCI_CONFIG_SPACE_SIZE); (gdb) n 932 assert(offset < offset + size); (gdb) p offset $1 = 256 (gdb) p offset < offset + size $2 = 1 (gdb) set offset=65533 (gdb) p offset < offset + size $3 = 1 (gdb) p offset < (uint16_t)(offset + size) $4 = 0 Signed-off-by: Daniella Lee <daniellalee111@gmail.com> Message-Id: <20211126061324.47331-1-daniellalee111@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-15pcie: expire pending deleteGerd Hoffmann1-0/+2
Add an expire time for pending delete, once the time is over allow pressing the attention button again. This makes pcie hotplug behave more like acpi hotplug, where one can try sending an 'device_del' monitor command again in case the guest didn't respond to the first attempt. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20211111130859.1171890-7-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-15pcie: fast unplug when slot power is offGerd Hoffmann1-0/+10
In case the slot is powered off (and the power indicator turned off too) we can unplug right away, without round-trip to the guest. Also clear pending attention button press, there is nothing to care about any more. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20211111130859.1171890-6-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-15pcie: factor out pcie_cap_slot_unplug()Gerd Hoffmann1-12/+20
No functional change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20211111130859.1171890-5-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-15pcie: add power indicator blink checkGerd Hoffmann1-0/+7
Refuse to push the attention button in case the guest is busy with some hotplug operation (as indicated by the power indicator blinking). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20211111130859.1171890-4-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-15pcie: implement slot power control for pcie root portsGerd Hoffmann1-0/+28
With this patch hot-plugged pci devices will only be visible to the guest if the guests hotplug driver has enabled slot power. This should fix the hot-plug race which one can hit when hot-plugging a pci device at boot, while the guest is in the middle of the pci bus scan. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20211111130859.1171890-3-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-15pci: implement power stateGerd Hoffmann2-4/+27
This allows to power off pci devices. In "off" state the devices will not be visible. No pci config space access, no pci bar access, no dma. Default state is "on", so this patch (alone) should not change behavior. Use case: Allows hotplug controllers implement slot power. Hotplug controllers doing so should set the inital power state for devices in the ->plug callback. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20211111130859.1171890-2-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-15pcie: rename 'native-hotplug' to 'x-native-hotplug'Igor Mammedov1-1/+1
Mark property as experimental/internal adding 'x-' prefix. Property was introduced in 6.1 and it should have provided ability to turn on native PCIE hotplug on port even when ACPI PCI hotplug is in use is user explicitly sets property on CLI. However that never worked since slot is wired to ACPI hotplug controller. Another non-intended usecase: disable native hotplug on slot when APCI based hotplug is disabled, which works but slot has 'hotplug' property for this taks. It should be relatively safe to rename it to experimental as no users should exist for it and given that the property is broken we don't really want to leave it around for much longer lest users start using it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20211112110857.3116853-2-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01pci: Export pci_for_each_device_under_bus*()Peter Xu2-8/+6
They're actually more commonly used than the helper without _under_bus, because most callers do have the pci bus on hand. After exporting we can switch a lot of the call sites to use these two helpers. Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20211028043129.38871-3-peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2021-11-01pci: Define pci_bus_dev_fn/pci_bus_fn/pci_bus_ret_fnPeter Xu1-14/+6
They're used in quite a few places of pci.[ch] and also in the rest of the code base. Define them so that it doesn't need to be defined all over the places. The pci_bus_fn is similar to pci_bus_dev_fn that only takes a PCIBus* and an opaque. The pci_bus_ret_fn is similar to pci_bus_fn but it allows to return a void* pointer. Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20211028043129.38871-2-peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-20pci: fix PCI resource reserve capability on BEMichael S. Tsirkin1-5/+5
PCI resource reserve capability should use LE format as all other PCI things. If we don't then seabios won't boot: === PCI new allocation pass #1 === PCI: check devices PCI: QEMU resource reserve cap: size 10000000000000 type io PCI: secondary bus 1 size 10000000000000 type io PCI: secondary bus 1 size 00200000 type mem PCI: secondary bus 1 size 00200000 type prefmem === PCI new allocation pass #2 === PCI: out of I/O address space This became more important since we started reserving IO by default, previously no one noticed. Fixes: e2a6290aab ("hw/pcie-root-port: Fix hotplug for PCI devices requiring IO") Cc: marcel.apfelbaum@gmail.com Fixes: 226263fb5c ("hw/pci: add QEMU-specific PCI capability to the Generic PCI Express Root Port") Cc: zuban32s@gmail.com Fixes: 6755e618d0 ("hw/pci: add PCI resource reserve capability to legacy PCI bridge") Cc: jing2.liu@linux.intel.com Tested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-09-30qbus: Rename qbus_create() to qbus_new()Peter Maydell1-1/+1
Rename the "allocate and return" qbus creation function to qbus_new(), to bring it into line with our _init vs _new convention. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210923121153.23754-6-peter.maydell@linaro.org
2021-09-30qbus: Rename qbus_create_inplace() to qbus_init()Peter Maydell2-3/+3
Rename qbus_create_inplace() to qbus_init(); this is more in line with our usual naming convention for functions that in-place initialize objects. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20210923121153.23754-5-peter.maydell@linaro.org
2021-09-30pci: Rename pci_root_bus_new_inplace() to pci_root_bus_init()Peter Maydell1-13/+13
Rename the pci_root_bus_new_inplace() function to pci_root_bus_init(); this brings the bus type in to line with a "_init for in-place init, _new for allocate-and-return" convention. To do this we need to rename the implementation-internal function that was using the pci_root_bus_init() name to pci_root_bus_internal_init(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20210923121153.23754-4-peter.maydell@linaro.org
2021-07-16hw/pci: Add pci_bus_range() to get PCI bus number rangeXingang Wang1-0/+16
This helps to get the min and max bus number of a PCI bus hierarchy. Signed-off-by: Xingang Wang <wangxingang5@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <1625748919-52456-6-git-send-email-wangxingang5@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16hw/pci/pci_host: Allow PCI host to bypass iommuXingang Wang2-1/+18
Add a new bypass_iommu property for PCI host and use it to check whether devices attached to the PCI root bus will bypass iommu. In pci_device_iommu_address_space(), check the property and avoid getting iommu address space for devices bypass iommu. Signed-off-by: Xingang Wang <wangxingang5@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <1625748919-52456-2-git-send-email-wangxingang5@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16hw/pci/pcie: Do not set HPC flag if acpihp is usedJulia Suvorova2-1/+8
Instead of changing the hot-plug type in _OSC register, do not set the 'Hot-Plug Capable' flag. This way guest will choose ACPI hot-plug if it is preferred and leave the option to use SHPC with pcie-pci-bridge. The ability to control hot-plug for each downstream port is retained, while 'hotplug=off' on the port means all hot-plug types are disabled. Signed-off-by: Julia Suvorova <jusual@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20210713004205.775386-4-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella1-1/+1
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth2-2/+0
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-04-06virtio-pci: compat page aligned ATSJason Wang1-4/+6
Commit 4c70875372b8 ("pci: advertise a page aligned ATS") advertises the page aligned via ATS capability (RO) to unbrek recent Linux IOMMU drivers since 5.2. But it forgot the compat the capability which breaks the migration from old machine type: (qemu) qemu-kvm: get_pci_config_device: Bad config data: i=0x104 read: 0 device: 20 cmask: ff wmask: 0 w1cmask:0 This patch introduces a new parameter "x-ats-page-aligned" for virtio-pci device and turns it on for machine type which is newer than 5.1. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: qemu-stable@nongnu.org Fixes: 4c70875372b8 ("pci: advertise a page aligned ATS") Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20210406040330.11306-1-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-01pci: sprinkle assert in PCI pin numberIsaku Yamahata1-0/+3
If a device model (a) doesn't set the value to a correct interrupt number and then (b) triggers an interrupt for itself, it's device model bug. Add assert on interrupt pin number to catch this kind of bug more obviously. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-Id: <9cf8ac3b17e162daac0971d7be32deb6a33ae6ec.1616532563.git.isaku.yamahata@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-22pci: introduce acpi-index property for PCI deviceIgor Mammedov1-0/+1
In x86/ACPI world, linux distros are using predictable network interface naming since systemd v197. Which on QEMU based VMs results into path based naming scheme, that names network interfaces based on PCI topology. With itm on has to plug NIC in exactly the same bus/slot, which was used when disk image was first provisioned/configured or one risks to loose network configuration due to NIC being renamed to actually used topology. That also restricts freedom to reshape PCI configuration of VM without need to reconfigure used guest image. systemd also offers "onboard" naming scheme which is preferred over PCI slot/topology one, provided that firmware implements: " PCI Firmware Specification 3.1 4.6.7. DSM for Naming a PCI or PCI Express Device Under Operating Systems " that allows to assign user defined index to PCI device, which systemd will use to name NIC. For example, using -device e1000,acpi-index=100 guest will rename NIC to 'eno100', where 'eno' is default prefix for "onboard" naming scheme. This doesn't require any advance configuration on guest side to com in effect at 'onboard' scheme takes priority over path based naming. Hope is that 'acpi-index' it will be easier to consume by management layer, compared to forcing specific PCI topology and/or having several disk image templates for different topologies and will help to simplify process of spawning VM from the same template without need to reconfigure guest NIC. This patch adds, 'acpi-index'* property and wires up a 32bit register on top of pci hotplug register block to pass index value to AML code at runtime. Following patch will add corresponding _DSM code and wire it up to PCI devices described in ACPI. *) name comes from linux kernel terminology Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210315180102.3008391-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-02hw/pci: Have safer pcie_bus_realize() by checking error pathPhilippe Mathieu-Daudé1-1/+6
While pci_bus_realize() currently does not use the Error* argument, it would be an error to leave pcie_bus_realize() setting bus->flags if pci_bus_realize() had failed. Fix by using a local Error* and return early (propagating the error) if pci_bus_realize() failed. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210201153700.618946-1-philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-02-23pcie: don't set link state active if the slot is emptyLaurent Vivier1-10/+9
When the pcie slot is initialized, by default PCI_EXP_LNKSTA_DLLLA (Data Link Layer Link Active) is set in PCI_EXP_LNKSTA (Link Status) without checking if the slot is empty or not. This is confusing for the kernel because as it sees the link is up it tries to read the vendor ID and fails: (From https://bugzilla.kernel.org/show_bug.cgi?id=211691) [ 1.661105] pcieport 0000:00:02.2: pciehp: Slot Capabilities : 0x0002007b [ 1.661115] pcieport 0000:00:02.2: pciehp: Slot Status : 0x0010 [ 1.661123] pcieport 0000:00:02.2: pciehp: Slot Control : 0x07c0 [ 1.661138] pcieport 0000:00:02.2: pciehp: Slot #0 AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+ Interlock+ NoCompl- IbPresDis- LLActRep+ [ 1.662581] pcieport 0000:00:02.2: pciehp: pciehp_get_power_status: SLOTCTRL 6c value read 7c0 [ 1.662597] pcieport 0000:00:02.2: pciehp: pciehp_check_link_active: lnk_status = 2204 [ 1.662703] pcieport 0000:00:02.2: pciehp: pending interrupts 0x0010 from Slot Status [ 1.662706] pcieport 0000:00:02.2: pciehp: pcie_enable_notification: SLOTCTRL 6c write cmd 1031 [ 1.662730] pcieport 0000:00:02.2: pciehp: pciehp_check_link_active: lnk_status = 2204 [ 1.662748] pcieport 0000:00:02.2: pciehp: pciehp_check_link_active: lnk_status = 2204 [ 1.662750] pcieport 0000:00:02.2: pciehp: Slot(0-2): Link Up [ 2.896132] pcieport 0000:00:02.2: pciehp: pciehp_check_link_status: lnk_status = 2204 [ 2.896135] pcieport 0000:00:02.2: pciehp: Slot(0-2): No device found [ 2.896900] pcieport 0000:00:02.2: pciehp: pending interrupts 0x0010 from Slot Status [ 2.896903] pcieport 0000:00:02.2: pciehp: pciehp_power_off_slot: SLOTCTRL 6c write cmd 400 [ 3.656901] pcieport 0000:00:02.2: pciehp: pending interrupts 0x0009 from Slot Status This is really a problem with virtio-net failover that hotplugs a VFIO card during the boot process. The kernel can shutdown the slot while QEMU is hotplugging it, and this likely ends by an automatic unplug of the card. At the end of the boot sequence the card has disappeared. To fix that, don't set the "Link Active" state in the init function, but rely on the plug function to do it, as the mechanism has already been introduced by 2f2b18f60bf1. Fixes: 2f2b18f60bf1 ("pcie: set link state inactive/active after hot unplug/plug") Cc: zhengxiang9@huawei.com Fixes: 3d67447fe7c2 ("pcie: Fill PCIESlot link fields to support higher speeds and widths") Cc: alex.williamson@redhat.com Fixes: b2101eae63ea ("pcie: Set the "link active" in the link status register") Cc: benh@kernel.crashing.org Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20210212135250.2738750-5-lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-02-23pci: cleanup failover sanity checkLaurent Vivier1-4/+2
Commit a1190ab628 has added a "allow_unplug_during_migration = true" at the end of the main "if" block, so it is not needed to set it anymore in the previous checking. Remove it, to have only sub-ifs that check for needed conditions and exit if one fails. Fixes: 4f5b6a05a4e7 ("pci: add option for net failover") Fixes: a1190ab628c0 ("migration: allow unplug during migration for failover devices") Cc: jfreimann@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20210212135250.2738750-2-lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-02-05pci: add romsize propertyPaolo Bonzini1-2/+17
This property can be useful for distros to set up known-good ROM sizes for migration purposes. The VM will fail to start if the ROM is too large, and migration compatibility will not be broken if the ROM is too small. Note that even though romsize is a uint32_t, it has to be between 1 (because empty ROM files are not accepted, and romsize must be greater than the file) and 2^31 (because values above are not powers of two and are rejected). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20201218182736.1634344-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210203131828.156467-3-pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Acked-by: Laszlo Ersek <lersek@redhat.com>
2021-02-05pci: reject too large ROMsPaolo Bonzini1-2/+8
get_image_size() returns an int64_t, which pci_add_option_rom() assigns to an "int" without any range checking. A 32-bit BAR could be up to 2 GiB in size, so reject anything above it. In order to accomodate a rounded-up size of 2 GiB, change pci_patch_ids's size argument to unsigned. Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210203131828.156467-2-pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com>
2021-01-28qapi: More complex uses of QAPI_LIST_APPENDEric Blake1-42/+18
These cases require a bit more thought to review; in each case, the code was appending to a list, but not with a FOOList **tail variable. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20210113221013.390592-6-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Flawed change to qmp_guest_network_get_interfaces() dropped] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-01-13pci/shpc: don't push attention button when ejecting powered-off deviceRoman Kagan1-2/+2
When the slot is in steady powered-off state and the device is being removed, there's no need to press the attention button. Nor is it mandated by the Standard Hot-Plug Controller Specification, Rev. 1.0. Moreover it confuses the guest, Linux in particular, as it assumes that the attention button pressed in this state indicates that the device has been inserted and will need to be powered on. Therefore it transitions the slot into BLINKING_ON state for 5 seconds, and discovers at the end that no device is actually inserted: ... unplug request [12685.451329] shpchp 0000:01:00.0: Button pressed on Slot(2) [12685.455478] shpchp 0000:01:00.0: PCI slot #2 - powering off due to button press ... in 5 seconds OS powers off the slot, QEMU ejects the device [12690.632282] shpchp 0000:01:00.0: Latch open on Slot(2) ... excessive button press in steady powered-off state [12690.634267] shpchp 0000:01:00.0: Button pressed on Slot(2) [12690.636256] shpchp 0000:01:00.0: Card not present on Slot(2) ... the last button press spawns powering on the slot [12690.638909] shpchp 0000:01:00.0: PCI slot #2 - powering on due to button press ... in 5 more seconds attempt to power on discovers empty slot [12695.735986] shpchp 0000:01:00.0: No adapter on slot(2) Worse, if the real device insertion happens within 5 seconds from the apparent completion of the previous device removal (signaled via DEVICE_DELETED event), the new button press will be interpreted as the cancellation of that misguided powering on: [13448.965295] shpchp 0000:01:00.0: Button pressed on Slot(2) [13448.969430] shpchp 0000:01:00.0: PCI slot #2 - powering off due to button press [13454.025107] shpchp 0000:01:00.0: Latch open on Slot(2) [13454.027101] shpchp 0000:01:00.0: Button pressed on Slot(2) [13454.029165] shpchp 0000:01:00.0: Card not present on Slot(2) ... the excessive button press spawns powering on the slot ... device has already been ejected by QEMU [13454.031949] shpchp 0000:01:00.0: PCI slot #2 - powering on due to button press ... new device is inserted in the slot [13456.861545] shpchp 0000:01:00.0: Latch close on Slot(2) ... valid button press arrives before 5 s since the wrong one [13456.864894] shpchp 0000:01:00.0: Button pressed on Slot(2) [13456.869211] shpchp 0000:01:00.0: Card present on Slot(2) ... the valid button press is counted as cancellation of the wrong one [13456.873173] shpchp 0000:01:00.0: Button cancel on Slot(2) [13456.877101] shpchp 0000:01:00.0: PCI slot #2 - action canceled due to button press As a result, the newly inserted device isn't brought up by the guest. Avoid this situation by not pushing the attention button when the device in the slot is in powered-off state and is being ejected. FWIW pcie implementation doesn't suffer from this problem. Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru> Message-Id: <20201102053750.2281818-1-rvkagan@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-01Merge remote-tracking branch ↵Peter Maydell1-0/+1
'remotes/ehabkost-gl/tags/machine-next-pull-request' into staging Machine queue, 2020-12-23 Cleanup: * qdev code cleanup (Eduardo Habkost) Bug fix: * hostmem: Free host_nodes list right after visited (Keqian Zhu) # gpg: Signature made Wed 23 Dec 2020 21:25:58 GMT # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost-gl/tags/machine-next-pull-request: bugfix: hostmem: Free host_nodes list right after visited qdev: Avoid unnecessary DeviceState* variable at set_prop_arraylen() qdev: Rename qdev_get_prop_ptr() to object_field_prop_ptr() qdev: Move qdev_prop_tpm declaration to tpm_prop.h qdev: Make qdev_class_add_property() more flexible qdev: Make PropertyInfo.create return ObjectProperty* qdev: Move dev->realized check to qdev_property_set() qdev: Wrap getters and setters in separate helpers qdev: Add name argument to PropertyInfo.create method qdev: Add name parameter to qdev_class_add_property() qdev: Avoid using prop->name unnecessarily qdev: Get just property name at error_set_from_qdev_prop_error() sparc: Use DEFINE_PROP for nwindows property qdev: Reuse DEFINE_PROP in all DEFINE_PROP_* macros qdev: Move softmmu properties to qdev-properties-system.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-19migration: Replace migration's JSON writer by the general oneMarkus Armbruster3-4/+4
Commit 8118f0950f "migration: Append JSON description of migration stream" needs a JSON writer. The existing qobject_to_json() wasn't a good fit, because it requires building a QObject to convert. Instead, migration got its very own JSON writer, in commit 190c882ce2 "QJSON: Add JSON writer". It tacitly limits numbers to int64_t, and strings contents to characters that don't need escaping, unlike qobject_to_json(). The previous commit factored the JSON writer out of qobject_to_json(). Replace migration's JSON writer by it. Cc: Juan Quintela <quintela@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201211171152.146877-17-armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-18qdev: Move softmmu properties to qdev-properties-system.hEduardo Habkost1-0/+1
Move the property types and property macros implemented in qdev-properties-system.c to a new qdev-properties-system.h header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-15msix: assert that accesses are within boundsPaolo Bonzini1-0/+3
This makes the testcase from the next patch fail. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15machine: introduce MachineInitPhasePaolo Bonzini1-1/+1
Generalize the qdev_hotplug variable to the different phases of machine initialization. We would like to allow different monitor commands depending on the phase. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10vl: extract softmmu/datadir.cPaolo Bonzini1-0/+1
Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-30pci: Disallow improper BAR registration for type 1Ben Widawsky1-0/+6
Prevent future developers working on root complexes, root ports, or bridges that also wish to implement a BAR for those, from shooting themselves in the foot. PCI type 1 headers only support 2 base address registers. It is incorrect and difficult to figure out what is wrong with the device when this mistake is made. With this, it is immediate and obvious what has gone wrong. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Message-Id: <20201015181411.89104-2-ben.widawsky@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-30pci: Change error_report to assert(3)Ben Widawsky1-5/+1
Asserts are used for developer bugs. As registering a bar of the wrong size is not something that should be possible for a user to achieve, this is a developer bug. While here, use the more obvious helper function. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Message-Id: <20201015181411.89104-1-ben.widawsky@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-10-30pci: advertise a page aligned ATSJason Wang1-2/+3
After Linux kernel commit 61363c1474b1 ("iommu/vt-d: Enable ATS only if the device uses page aligned address."), ATS will be only enabled if device advertises a page aligned request. Unfortunately, vhost-net is the only user and we don't advertise the aligned request capability in the past since both vhost IOTLB and address_space_get_iotlb_entry() can support non page aligned request. Though it's not clear that if the above kernel commit makes sense. Let's advertise a page aligned ATS here to make vhost device IOTLB work with Intel IOMMU again. Note that in the future we may extend pcie_ats_init() to accept parameters like queue depth and page alignment. Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20200909081731.24688-1-jasowang@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-30pci: Assert irqnum is between 0 and bus->nirqs in pci_bus_change_irq_levelMark Cave-Ayland1-0/+2
These assertions similar to those in the adjacent pci_bus_get_irq_level() function ensure that irqnum lies within the valid PCI bus IRQ range. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20201011082022.3016-1-mark.cave-ayland@ilande.co.uk> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201024203900.3619498-3-f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-30hw/pci: Extract pci_bus_change_irq_level() from pci_change_irq_level()Philippe Mathieu-Daudé1-2/+7
Extract pci_bus_change_irq_level() from pci_change_irq_level() to make it clearer it operates on the bus. Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201024203900.3619498-2-f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-13hw/pci: Fix typo in PCI hot-plug error messageJulia Suvorova1-1/+1
'occupied' is spelled like 'ocuppied' in the message. Signed-off-by: Julia Suvorova <jusual@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201006133958.600932-1-jusual@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-29qapi: Extract PCI commands to 'pci.json'Philippe Mathieu-Daudé2-2/+2
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Extracting the PCI commands to their own schema reduces the size of the qapi-misc* headers generated, and pulls less QAPI-generated code into user-mode. Suggested-by: Markus Armbruster <armbru@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-9-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-22qom: simplify object_find_property / object_class_find_propertyDaniel P. Berrangé1-1/+1
When debugging QEMU it is often useful to put a breakpoint on the error_setg_internal method impl. Unfortunately the object_property_add / object_class_property_add methods call object_property_find / object_class_property_find methods to check if a property exists already before adding the new property. As a result there are a huge number of calls to error_setg_internal on startup of most QEMU commands, making it very painful to set a breakpoint on this method. Most callers of object_find_property and object_class_find_property, however, pass in a NULL for the Error parameter. This simplifies the methods to remove the Error parameter entirely, and then adds some new wrapper methods that are able to raise an Error when needed. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200914135617.1493072-1-berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-21meson: convert hw/pciMarc-André Lureau2-14/+19
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini1-0/+1
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-27hw/pci-host: save/restore pci host config registerHogan Wang1-0/+33
The pci host config register is used to save PCI address for read/write config data. If guest writes a value to config register, and then QEMU pauses the vcpu to migrate, after the migration, the guest will continue to write pci config data, and the write data will be ignored because of new qemu process losing the config register state. To trigger the bug: 1. guest is booting in seabios. 2. guest enables the SMRAM in seabios:piix4_apmc_smm_setup, and then expects to disable the SMRAM by pci_config_writeb. 3. after guest writes the pci host config register, QEMU pauses vcpu to finish migration. 4. guest write of config data(0x0A) fails to disable the SMRAM because the config register state is lost. 5. guest continues to boot and crashes in ipxe option ROM due to SMRAM in enabled state. Example Reproducer: step 1. Make modifications to seabios and qemu for increase reproduction efficiency, write 0xf0 to 0x402 port notify qemu to stop vcpu after 0x0cf8 port wrote i440 configure register. qemu stop vcpu when catch 0x402 port wrote 0xf0. seabios:/src/hw/pci.c @@ -52,6 +52,11 @@ void pci_config_writeb(u16 bdf, u32 addr, u8 val) writeb(mmconfig_addr(bdf, addr), val); } else { outl(ioconfig_cmd(bdf, addr), PORT_PCI_CMD); + if (bdf == 0 && addr == 0x72 && val == 0xa) { + dprintf(1, "stop vcpu\n"); + outb(0xf0, 0x402); // notify qemu to stop vcpu + dprintf(1, "resume vcpu\n"); + } outb(val, PORT_PCI_DATA + (addr & 3)); } } qemu:hw/char/debugcon.c @@ -60,6 +61,9 @@ static void debugcon_ioport_write(void *opaque, hwaddr addr, uint64_t val, printf(" [debugcon: write addr=0x%04" HWADDR_PRIx " val=0x%02" PRIx64 "]\n", addr, val); #endif + if (ch == 0xf0) { + vm_stop(RUN_STATE_PAUSED); + } /* XXX this blocks entire thread. Rewrite to use * qemu_chr_fe_write and background I/O callbacks */ qemu_chr_fe_write_all(&s->chr, &ch, 1); step 2. start vm1 by the following command line, and then vm stopped. $ qemu-system-x86_64 -machine pc-i440fx-5.0,accel=kvm\ -netdev tap,ifname=tap-test,id=hostnet0,vhost=on,downscript=no,script=no\ -device virtio-net-pci,netdev=hostnet0,id=net0,bus=pci.0,addr=0x13,bootindex=3\ -device cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2\ -chardev file,id=seabios,path=/var/log/test.seabios,append=on\ -device isa-debugcon,iobase=0x402,chardev=seabios\ -monitor stdio step 3. start vm2 to accept vm1 state. $ qemu-system-x86_64 -machine pc-i440fx-5.0,accel=kvm\ -netdev tap,ifname=tap-test1,id=hostnet0,vhost=on,downscript=no,script=no\ -device virtio-net-pci,netdev=hostnet0,id=net0,bus=pci.0,addr=0x13,bootindex=3\ -device cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2\ -chardev file,id=seabios,path=/var/log/test.seabios,append=on\ -device isa-debugcon,iobase=0x402,chardev=seabios\ -monitor stdio \ -incoming tcp:127.0.0.1:8000 step 4. execute the following qmp command in vm1 to migrate. (qemu) migrate tcp:127.0.0.1:8000 step 5. execute the following qmp command in vm2 to resume vcpu. (qemu) cont Before this patch, we get KVM "emulation failure" error on vm2. This patch fixes it. Cc: qemu-stable@nongnu.org Signed-off-by: Hogan Wang <hogan.wang@huawei.com> Message-Id: <20200727084621.3279-1-hogan.wang@huawei.com> Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-02qdev: Drop qbus_set_hotplug_handler() parameter @errpMarkus Armbruster2-2/+2
qbus_set_hotplug_handler() is a simple wrapper around object_property_set_link(). object_property_set_link() fails when the property doesn't exist, is not settable, or its .check() method fails. These are all programming errors here, so passing &error_abort to qbus_set_hotplug_handler() is appropriate. Most of its callers do. Exceptions: * pcie_cap_slot_init(), shpc_init(), spapr_phb_realize() pass NULL, i.e. they ignore errors. * spapr_machine_init() passes &error_fatal. * s390_pcihost_realize(), virtio_serial_device_realize(), s390_pcihost_plug() pass the error to their callers. The latter two keep going after the error, which looks wrong. Drop the @errp parameter, and instead pass &error_abort to object_property_set_link(). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-15-armbru@redhat.com>
generated by cgit v1.1 at 2025-01-01 00:27:08 +0000