aboutsummaryrefslogtreecommitdiff
path: root/hw/pci-bridge
AgeCommit message (Collapse)AuthorFilesLines
2022-03-06pci: expose TYPE_XIO3130_DOWNSTREAM nameIgor Mammedov1-1/+2
Type name will be used in followup patch for cast check in pcihp code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220301151200.3507298-2-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-06pci-bridge/xio3130_downstream: Fix error handlingJonathan Cameron1-1/+1
Wrong goto label, so msi cleanup would not occur if there is an error in the ssvid initialization. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220218102303.7061-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-06pci-bridge/xio3130_upstream: Fix error handlingJonathan Cameron1-1/+1
Goto label is incorrect so msi cleanup would not occur if there is an error in the ssvid initialization. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220218102303.7061-1-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-06hw/pci-bridge/pxb: Fix missing swizzleJonathan Cameron1-0/+6
pxb_map_irq_fn() handled the necessary removal of the swizzle applied to the PXB interrupts by the bus to which it was attached but neglected to apply the normal swizzle for PCI root ports on the expander bridge. Result of this was on ARM virt, the PME interrupts for a second RP on a PXB instance were miss-routed to #45 rather than #46. Tested with a selection of different configurations with 1 to 5 RP per PXB instance. Note on my x86 test setup the PME interrupts are not triggered so I haven't been able to test this. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20220118174855.19325-1-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-15qdev: Make DeviceState.id independent of QemuOptsKevin Wolf1-1/+1
DeviceState.id is a pointer to a string that is stored in the QemuOpts object DeviceState.opts and freed together with it. We want to create devices without going through QemuOpts in the future, so make this a separately allocated string. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20211008133442.141332-9-kwolf@redhat.com> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-08-03hw/pcie-root-port: Fix hotplug for PCI devices requiring IOMarcel Apfelbaum1-0/+5
Q35 has now ACPI hotplug enabled by default for PCI(e) devices. As opposed to native PCIe hotplug, guests like Fedora 34 will not assign IO range to pcie-root-ports not supporting native hotplug, resulting into a regression. Reproduce by: qemu-bin -M q35 -device pcie-root-port,id=p1 -monitor stdio device_add e1000,bus=p1 In the Guest OS the respective pcie-root-port will have the IO range disabled. Fix it by setting the "reserve-io" hint capability of the pcie-root-ports so the firmware will allocate the IO range instead. Acked-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <20210802090057.1709775-1-marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16hw/pxb: Add a bypass iommu propertyXingang Wang1-0/+3
Add a bypass_iommu property for pci_expander_bridge, the property is used to indicate whether pxb root bus will bypass iommu. By default the bypass_iommu is disabled, and it can be enabled with: qemu -device pxb-pcie,bus_nr=0x10,addr=0x1,bypass_iommu=true Signed-off-by: Xingang Wang <wangxingang5@huawei.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-Id: <1625748919-52456-3-git-send-email-wangxingang5@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-17Kconfig: Compile PXB for ARM_VIRTJiahui Cen1-1/+1
PXB is now supported on ARM, so let's compile for arm_virt machine. Acked-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jiahui Cen <cenjiahui@huawei.com> Message-Id: <20210114100643.10617-7-cenjiahui@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-18qdev: Move softmmu properties to qdev-properties-system.hEduardo Habkost1-0/+1
Move the property types and property macros implemented in qdev-properties-system.c to a new qdev-properties-system.h header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-11-15nomaintainer: Fix Lesser GPL version numberChetan Pant1-1/+1
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. This patch contains all the files, whose maintainer I could not get from ‘get_maintainer.pl’ script. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Adapted exec.c and qdev-monitor.c to new location] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost4-12/+4
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost5-11/+16
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost5-11/+21
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-21meson: convert hw/pci-bridgeMarc-André Lureau2-10/+14
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-15sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster1-1/+1
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15pci: Convert uses of pci_create() etc. with CoccinelleMarkus Armbruster1-3/+3
Replace dev = pci_create(bus, type_name); ... qdev_init_nofail(dev); by dev = pci_new(type_name); ... pci_realize_and_unref(dev, bus, &error_fatal); and similarly for pci_create_multifunction(). Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. Coccinelle script: @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; expression d; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ( d = &dev->qdev; | d = DEVICE(dev); ) ... when != dev = expr - qdev_init_nofail(d); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = DEVICE(pci_create(bus, args)); + PCIDevice *pci_dev; // TODO move + pci_dev = pci_new(args); + dev = DEVICE(pci_dev); ... when != dev = expr - qdev_init_nofail(dev); + pci_realize_and_unref(pci_dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create_multifunction(bus, args); + dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, expr; expression list args; identifier dev; @@ - PCIDevice *dev = pci_create_multifunction(bus, args); + PCIDevice *dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create_multifunction(bus, args); + dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + pci_realize_and_unref(dev, bus, &error_fatal); Missing #include "qapi/error.h" added manually, whitespace changes minimized manually, @pci_dev declarations moved manually. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-16-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() manuallyMarkus Armbruster1-2/+2
Same transformation as in the previous commit. Manual, because convincing Coccinelle to transform these cases is somewhere between not worthwhile and infeasible (at least for me). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-11-armbru@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster1-2/+2
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-05-27hw/pci-bridge/dec: Remove dead debug codePhilippe Mathieu-Daudé1-10/+0
Remove debug code never used since added in commit e1c6bbabee30. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200525033910.26166-1-f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-03-08pcie_root_port: Add hotplug disabling optionJulia Suvorova2-2/+2
Make hot-plug/hot-unplug on PCIe Root Ports optional to allow libvirt manage it and restrict unplug for the whole machine. This is going to prevent user-initiated unplug in guests (Windows mostly). Hotplug is enabled by default. Usage: -device pcie-root-port,hotplug=off,... If you want to disable hot-unplug on some downstream ports of one switch, disable hot-unplug on PCIe Root Port connected to the upstream port as well as on the selected downstream ports. Discussion related: https://lists.gnu.org/archive/html/qemu-devel/2020-02/msg00530.html Signed-off-by: Julia Suvorova <jusual@redhat.com> Message-Id: <20200226174607.205941-1-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau6-7/+7
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-03numa: move numa global variable nb_numa_nodes into MachineStateTao Xu1-1/+8
Add struct NumaState in MachineState and move existing numa global nb_numa_nodes(renamed as "num_nodes") into NumaState. And add variable numa_support into MachineClass to decide which submachines support NUMA. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com> Message-Id: <20190809065731.9097-3-tao3.xu@intel.com> [ehabkost: include hw/boards.h again to fix build failures] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster6-0/+6
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster5-0/+5
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-07-30pcie_root_port: Allow ACS to be disabledDr. David Alan Gilbert1-1/+2
ACS was added in 4.0 unconditionally, this breaks migration compatibility. Allow ACS to be disabled by adding a property that's checked by pcie_root_port. Unfortunately pcie-root-port doesn't have any instance data, so there's no where for that flag to live, so stuff it into PCIESlot. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190730093719.12958-2-dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-12xio3130_downstream: typo fixMichael S. Tsirkin1-1/+1
slt ctl/status are passed in incorrect order. Fix this up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
2019-07-01pcie: check that slt ctrl changed before deletingMichael S. Tsirkin2-2/+8
During boot, linux would sometimes overwrites control of a powered off slot before powering it on. Unfortunately QEMU interprets that as a power off request and ejects the device. For example: /x86_64-softmmu/qemu-system-x86_64 -enable-kvm -S -machine q35 \ -device pcie-root-port,id=pcie_root_port_0,slot=2,chassis=2,addr=0x2,bus=pcie.0 \ -monitor stdio disk.qcow2 (qemu)device_add virtio-balloon-pci,id=balloon,bus=pcie_root_port_0 (qemu)cont Balloon is deleted during guest boot. To fix, save control beforehand and check that power or led state actually change before ejecting. Note: this is more a hack than a solution, ideally we'd find a better way to detect ejects, or move away from ejects completely and instead monitor whether it's safe to delete device due to e.g. its power state. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster1-1/+0
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster11-0/+11
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-05-29pci: Make is_bridge a boolDavid Gibson8-9/+9
The is_bridge field in PCIDevice acts as a bool, but is declared as an int. Declare it as a bool for clarity, and change everything that writes it to use true/false instead of 0/1 to match. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20190513061939.3464-5-david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20pci: Simplify pci_bus_is_root()David Gibson1-6/+0
pci_bus_is_root() currently relies on a method in the PCIBusClass. But it's always known if a PCI bus is a root bus when we create it, so using a dynamic method is overkill. This replaces it with an IS_ROOT bit in a new flags field, which is set on root buses and otherwise clear. As a bonus this removes the special is_root logic from pci_expander_bridge, since it already creates its bus as a root bus. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20190424041959.4087-3-david@gibson.dropbear.id.au>
2019-03-18kconfig: add dependencies on CONFIG_MSI_NONBROKENPaolo Bonzini1-3/+3
For devices that require msi_init/msix_init to succeed, add a dependency on CONFIG_MSI_NONBROKEN. This will prevent those devices from appearing in a binary that cannot instantiate them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-12gen_pcie_root_port: Add ACS (Access Control Services) capabilityKnut Omang2-0/+8
Claim ACS support in the generic PCIe root port to allow passthrough of individual functions of a device to different guests (in a nested virt.setting) with VFIO. Without this patch, all functions of a device, such as all VFs of an SR/IOV device, will end up in the same IOMMU group. A similar situation occurs on Windows with Hyper-V. In the single function device case, it also has a small cosmetic benefit in that the root port itself is not grouped with the device. VFIO handles that situation in that binding rules only apply to endpoints, so it does not limit passthrough in those cases. Signed-off-by: Knut Omang <knut.omang@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <319460b483f566dd57487eb3dd340ed4c10aa53c.1550768238.git-series.knut.omang@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2019-03-07i386-softmmu.mak: remove all CONFIG_* except boards definitionsYang Zhong1-0/+1
%-softmmu.mak only keep boards definitions in Kconfig mode. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-43-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: convert pci.mak to KconfigPaolo Bonzini1-0/+8
Instead of including the same list of devices for each target, set CONFIG_PCI to true, and make the devices default to present whenever PCI is available. However, s390x does not want all the PCI devices, so there is a separate symbol to enable them. Done mostly with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y if PCI_DEVICES\' -e' depends on PCI' \ `grep -lw $i hw/*/Kconfig` done < default-configs/pci.mak followed by replacing a few "depends on" clauses with "select" whenever the symbol is not really related to PCI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-31-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini1-0/+20
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-20pci/shpc: perform unplug via the hotplug handlerDavid Hildenbrand2-0/+11
Introduce and use the "unplug" callback. This is a preparation for multi-stage hotplug handlers, whereby the bus hotplug handler is overwritten by the machine hotplug handler. This handler will then pass control to the bus hotplug handler. So to get this running cleanly, we also have to make sure to go via the hotplug handler chain when actually unplugging a device after an unplug request. Lookup the hotplug handler and call "unplug". Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci: Reuse pci-bridge hotplug handler handlers for pcie-pci-bridgeDavid Hildenbrand2-34/+8
These functions are essentially the same, we only have to use object_get_typename() for reporting errors. So let's share the implementation of hotplug handler callbacks. Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/shpc: rename hotplug handler callbacksDavid Hildenbrand2-18/+16
The callbacks are also called for cold plugged devices. Drop the "hot" to better match the actual callback names. While at it, also rename shpc_device_hotplug_common() to shpc_device_plug_common(). Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pcie: Fast PCIe root ports for new machinesAlex Williamson1-2/+2
Change the default speed and width for new machine types to the fastest and widest currently supported. This should be compatible to the PCIe 4.0 spec. Pre-QEMU-4.0 machine types remain at 2.5GT/s, x1 width. Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pcie: Allow generic PCIe root port to specify link speed and widthAlex Williamson1-0/+4
Allow users to experimentally specify speed and width values for the generic PCIe root port. Defaults remain at 2.5GT/s & x1 for compatiblity with the intent to only support changing defaults via machine types for now. Note for libvirt testing that pcie-root-port controllers are given default names like "pci.7" which don't play well with using the "-set device.$name.$prop=$value" options accessible to us via <qemu:commandline> options. The solution is to add an <alias> to the pcie-root-port <controller>, for example: <controller type='pci' index='7' model='pcie-root-port'> <model name='pcie-root-port'/> <target chassis='7' port='0x15'/> <alias name='ua-gfx0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x5'/> </controller> The "ua-" here is a mandatory prefix. We can then use: <qemu:commandline> <qemu:arg value='-set'/> <qemu:arg value='device.ua-gfx0.x-speed=8'/> <qemu:arg value='-set'/> <qemu:arg value='device.ua-gfx0.x-width=16'/> </qemu:commandline> or, without an alias, set globals such as: <qemu:commandline> <qemu:arg value='-global'/> <qemu:arg value='pcie-root-port.x-speed=8'/> <qemu:arg value='-global'/> <qemu:arg value='pcie-root-port.x-width=16'/> </qemu:commandline> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Tested-by: Geoffrey McRae <geoff@hostfission.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pcie: Add link speed and width fields to PCIESlotAlex Williamson1-0/+14
Add fields allowing the PCIe link speed and width of a PCIESlot to be configured, with an instance_post_init callback on the root port parent class to set defaults. This allows child classes to set these via properties or via their own instance_init callback, without requiring all implementions to support arbitrary user selected values. Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Tested-by: Geoffrey McRae <geoff@hostfission.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-13pci-bridge/dec: Convert sysbus init function to realize functionMao Zhongyi1-6/+6
Use DeviceClass rather than SysBusDeviceClass in pci_dec_21154_device_class_init(). Cc: david@gibson.dropbear.id.au Cc: mst@redhat.com Cc: marcel.apfelbaum@gmail.com Cc: qemu-ppc@nongnu.org Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-id: 20181130093852.20739-16-maozhongyi@cmss.chinamobile.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-05hw/pci-bridge/ioh3420: Remove unuseful headerPhilippe Mathieu-Daudé2-7/+1
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-11-05hw/pci-bridge/xio3130: Remove unused functionsPhilippe Mathieu-Daudé4-71/+2
Introduced in 48ebf2f90f8 and faf1e708d5b, these functions were never used. Remove them. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-07hw/pci: add PCI resource reserve capability to legacy PCI bridgeJing Liu1-0/+24
Add hint to firmware (e.g. SeaBIOS) to reserve addtional BUS/IO/MEM/PREF resource for legacy pci-pci bridge. Add the resource reserve capability deleting in pci_bridge_dev_exitfn. Signed-off-by: Jing Liu <jing2.liu@linux.intel.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-09-07hw/pci: factor PCI reserve resources to a separate structureJing Liu1-16/+17
Factor "bus_reserve", "io_reserve", "mem_reserve", "pref32_reserve" and "pref64_reserve" fields of the "GenPCIERootPort" structure out to "PCIResReserve" structure, so that other PCI bridges can reuse it to add resource reserve capability. Signed-off-by: Jing Liu <jing2.liu@linux.intel.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell8-5/+8
virtio,vhost,pci,pc: features, fixes and cleanups - new stats in virtio balloon - virtio eventfd rework for boot speedup - vhost memory rework for boot speedup - fixes and cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 13 Feb 2018 16:29:55 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (22 commits) virtio-balloon: include statistics of disk/file caches acpi-test: update FADT lpc: drop pcie host dependency tests: acpi: fix FADT not being compared to reference table hw/pci-bridge: fix pcie root port's IO hints capability libvhost-user: Support across-memory-boundary access libvhost-user: Fix resource leak virtio-balloon: unref the memory region before continuing pci: removed the is_express field since a uniform interface was inserted virtio-blk: enable multiple vectors when using multiple I/O queues pci/bus: let it has higher migration priority pci-bridge/i82801b11: clear bridge registers on platform reset vhost: Move log_dirty check vhost: Merge and delete unused callbacks vhost: Clean out old vhost_set_memory and friends vhost: Regenerate region list from changed sections list vhost: Merge sections added to temporary list vhost: Simplify ring verification checks vhost: Build temporary section list and deref after commit virtio: improve virtio devices initialization time ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster3-4/+0
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-08pci: removed the is_express field since a uniform interface was insertedYoni Bettan4-4/+0
according to Eduardo Habkost's commit fd3b02c889 all PCIEs now implement INTERFACE_PCIE_DEVICE so we don't need is_express field anymore. Devices that implements only INTERFACE_PCIE_DEVICE (is_express == 1) or devices that implements only INTERFACE_CONVENTIONAL_PCI_DEVICE (is_express == 0) where not affected by the change. The only devices that were affected are those that are hybrid and also had (is_express == 1) - therefor only: - hw/vfio/pci.c - hw/usb/hcd-xhci.c - hw/xen/xen_pt.c For those 3 I made sure that QEMU_PCI_CAP_EXPRESS is on in instance_init() Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yoni Bettan <ybettan@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.1 at 2024-12-29 20:38:52 +0000