aboutsummaryrefslogtreecommitdiff
path: root/hw/pc.c
AgeCommit message (Collapse)AuthorFilesLines
2009-10-01Get rid of _t suffixmalc1-15/+15
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-20Compile loader only onceBlue Swirl1-1/+4
Callers must pass ELF machine, byte swapping and symbol LSB clearing information to ELF loader. A.out loader needs page size information, pass that too as a parameter. Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw. Adjust callers. Also use target_phys_addr_t instead of target_ulong for addresses: loader addresses aren't virtual. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-15ide/isa: convert to qdev.Gerd Hoffmann1-2/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-13x86: move a declaration to headerBlue Swirl1-2/+0
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-13x86: add 'const'Blue Swirl1-6/+7
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-10qdev/isa: convert real time clockGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10qdev/isa: convert ne2000Gerd Hoffmann1-1/+1
Also split the isa bits into a separate source file, so we don't drag in a dependency for isa-bus.o for machines which want ne2k_pci only. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10qdev: simplify isa irq assignmentsGerd Hoffmann1-1/+1
isa-bus owns the isa irqs now, so it can hand them out directly. There is no need for the separate isa_connect_irqs step, drop it. Also hard-code isa interrupts which can't be configured anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10qdev: drop iobase properties from isa busGerd Hoffmann1-2/+2
Lot of ISA devices work at fixed addresses, so having iobase as bus property doesn't make much sense. Devices which can have different iobases will get a device property. Also simply hard-code stuff which can't be configured anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10isapc: pick a more sane default cpu for such old hardware.Gerd Hoffmann1-0/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10isapc: Fix irq routingGerd Hoffmann1-1/+2
Only send irqs to ioapic in case we have one. Fixes qemu segfault. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-06Fix indentationBlue Swirl1-26/+26
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-04mips malta: Fix fdc regression and use qdev for i8042 setupStefan Weil1-1/+1
8baf73adf664e79eae201c3f618078a220a661d9 (qdev/isa: convert fdc) breaks MIPS Malta: Tried to create isa device isa-fdc with no isa bus present Fix this by creating an isa bus for piix4. This change also requires some more qdev related changes (similar changes were applied to pc.c) and allows cleaning of piix3/piix4 code. Thanks to Gerd Hoffmann for his hints. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04ide: pass down DriveInfo instead of BlockDriverStateGerd Hoffmann1-8/+7
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04Fold piix3_init() intto i440fx_initJuan Quintela1-2/+1
i440fx_init will now work properly if we don't setup piix3 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04Use PCII440FXState instead of generic PCIDeviceJuan Quintela1-1/+1
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27switch balloon initialization to -device.Gerd Hoffmann1-7/+0
With that patch applied "-balloon virtio,args" becomes a shortcut for "-device virtio-balloon-pci,args". Side effects: - ballon device gains support for id=<tag>. - ballon device is off by default now. - initialization order changes, which may in different pci slot assignment depending on the VM configuration. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ide: split away ide-isa.cGerd Hoffmann1-0/+1
create ide-isa.c and place isa bus support there. only build ide-isa support for platforms using it. also create ide.h header file. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27qdev: convert watchdogsMarkus Armbruster1-2/+0
-watchdog NAME is now equivalent to -device NAME, except it treats option argument '?' specially, and supports only one watchdog. A side effect is that a device created with -watchdog may now receive a different PCI address. i6300esb is now available on any machine with a PCI bus, not just PCs. ib700 is still PC only, but that could be changed easily. The only remaining use of struct WatchdogTimerModel and watchdog_add_model() is supporting '-watchdog ?'. Should be replaced by searching device_info_list for watchdog devices when we can identify them there. Also fixes ib700 not to use vm_clock before it is initialized: in wdt_ib700_init(), called from register_watchdogs(), which runs before init_timers(). The bug made ib700_write_enable_reg() crash in qemu_del_timer(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Move isa_connect_irq calls into isa_create_simpleGerd Hoffmann1-3/+1
Now with isa-bus maintaining the isa irqs we can move the isa_connect_irq() calls into isa_create_simple(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add isa_reserve_irq().Jes Sorensen1-10/+14
Introduce isa_reserve_irq() which marks an irq reserved and returns the appropriate qemu_irq entry from the i8259 table. isa_reserve_irq() is a temporary interface to be used to allocate ISA IRQs for devices which have not yet been converted to qdev, and for special cases which are not suited for qdev conversions, such as the 'ferr'. This patch goes on top of Gerd Hoffmann's which makes isa-bus.c own the ISA irq table. [ added isa-bus.o to some targets to fix build failures -- kraxel ] Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27isa bus irq changes and fixes.Gerd Hoffmann1-3/+5
Changes: (1) make isa-bus maintain isa irqs, complain when allocating already taken irqs. (2) note that (1) works only for isa devices converted to qdev already (floppy and ps2/kbd/mouse right now), so more work is needed to make this really useful. (3) split floppy init into isa and sysbus versions. (4) add sysbus->isa bridge & fix -M isapc breakage. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24Make the e1000 the default network adapter for the pc target.Anthony Liguori1-2/+2
The ne2k is an ancient card that performs pretty terribly under QEMU. In many modern OSes, there is no longer drivers available for the ne2k. Switch the default network adapter to e1000. This card is more widely suppported and performs rather well under QEMU. There may be very old OSes that had a ne2k driver but not an e1000 driver but I think this is likely the exception. I think the average user is better served with an e1000 vs ne2k. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24virtio-blk: add msi support.Gerd Hoffmann1-0/+4
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24Unbreak large mem support by removing kqemuAnthony Liguori1-11/+1
kqemu introduces a number of restrictions on the i386 target. The worst is that it prevents large memory from working in the default build. Furthermore, kqemu is fundamentally flawed in a number of ways. It relies on the TSC as a time source which will not be reliable on a multiple processor system in userspace. Since most modern processors are multicore, this severely limits the utility of kqemu. kvm is a viable alternative for people looking to accelerate qemu and has the benefit of being supported by the upstream Linux kernel. If someone can implement work arounds to remove the restrictions introduced by kqemu, I'm happy to avoid and/or revert this patch. N.B. kqemu will still function in the 0.11 series but this patch removes it from the 0.12 series. Paul, please Ack or Nack this patch. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24Route IOAPIC interrupts via ISA busAvi Kivity1-8/+8
Instead of calling the IOAPIC from the PIC, raise IOAPIC irqs via the ISA bus. As a side effect, IOAPIC lines 16-23 are enabled. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24Route PC irqs to ISA bus instead of i8259 directlyAvi Kivity1-15/+31
A PC has its motherboard IRQ lines connected to both the PIC and IOAPIC. Currently, qemu routes IRQs to the PIC which then calls the IOAPIC, an incestuous arrangement. In order to clean this up, create a new ISA IRQ abstraction, and have devices raise ISA IRQs (which in turn raise the i8259 IRQs as usual). Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24QEMU set irq0override in fw_cfgJes Sorensen1-0/+2
Hi, After discussing the issue with Avi, Gleb and a couple others on irq, we came to the conclusion that it is preferred to have QEMU request features from the BIOS, rather than notifying the BIOS that it is running on QEMU or KVM. This way memory ranges can change etc. and an older BIOS will continue to work on newer QEMU if it receives the info as a fw_cfg value. This one also matches what qemu-kvm does for irq0override, except I haven't made it configurable. I leave that as an exercise for whoever would be interested in switching off irq0override. Thanks, Jes Set irq0 override in fw_cfg, informing the BIOS that QEMU expects override on irq0. This matches qemu-kvm, and will help sharing a single BIOS binary. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-10qdev/isa: make pc use qdev for i8042 setup.Gerd Hoffmann1-1/+4
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10qdev-ify virtio-blk.Gerd Hoffmann1-12/+0
First user of the new drive property. With this patch applied host and guest config can be specified separately, like this: -drive if=none,id=disk1,file=/path/to/disk.img -device virtio-blk-pci,drive=disk1 You can set any property for virtio-blk-pci now. You can set the pci address via addr=. You can switch the device into 0.10 compat mode using class=0x0180. As this is per device you can have one 0.10 and one 0.11 virtio block device in a single virtual machine. Old syntax continues to work. Internally it does the same as the two lines above though. One side effect this has is a different initialization order, which might result in a different pci address being assigned by default. Long term plan here is to have this working for all block devices, i.e. once all scsi is properly qdev-ified you will be able to do something like this: -drive if=none,id=sda,file=/path/to/disk.img -device lsi,id=lsi,addr=<pciaddr> -device scsi-disk,drive=sda,bus=lsi.0,lun=<n> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-07-30Remove the pc-0-10 machine typeMark McLoughlin1-50/+5
We have the pc-0.10 machine type now which does exactly the same thing. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27kill drives_tableGerd Hoffmann1-14/+7
First step cleaning up the drives handling. This one does nothing but removing drives_table[], still it became seriously big. drive_get_index() is gone and is replaced by drives_get() which hands out DriveInfo pointers instead of a table index. This needs adaption in *tons* of places all over. The drives are now maintained as linked list. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27Add a pc-0.11 machine type and make the pc type an aliasMark McLoughlin1-1/+2
The pc-0.11 type allows users of qemu-0.11 to use a machine type which they know will remain compatible when the upgrade to qemu-0.12. Management tools may choose to canonicalize the 'pc' machine type to 'pc-0.11' so that if the 'pc' alias changes target in future versions of qemu, the machine type used will remain compatible. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16qdev/compat: virtio-net-pci 0.10 compatibility.Gerd Hoffmann1-0/+4
Add vectors property, allowing to turn off msi by setting vectors=0. Add compat property to pc-0.10 disabling msi. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16qdev/compat: virtio-console-pci 0.10 compatibility.Gerd Hoffmann1-0/+4
Add class property to virtio-console-pci allowing to specify the PCI class. Add compat property to pc-0.10 to set the old PCI class. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16qdev/compat: virtio-blk-pci 0.10 compatibility.Gerd Hoffmann1-0/+5
Add class property to virtio-blk-pci allowing to specify the PCI class. Add compat property to pc-0.10 to set the old PCI class. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16qdev/compat: add pc-0.10 machine type.Gerd Hoffmann1-0/+11
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16qdev: rework device properties.Gerd Hoffmann1-2/+2
This patch is a major overhaul of the device properties. The properties are saved directly in the device state struct now, the linked list of property values is gone. Advantages: * We don't have to maintain the list with the property values. * The value in the property list and the value actually used by the device can't go out of sync any more (used to happen for the pci.devfn == -1 case) because there is only one place where the value is stored. * A record describing the property is required now, you can't set random properties any more. There are bus-specific and device-specific properties. The former should be used for properties common to all bus drivers. Typical use case is bus addressing, i.e. pci.devfn and i2c.address. Properties have a PropertyInfo struct attached with name, size and function pointers to parse and print properties. A few common property types have PropertyInfos defined in qdev-properties.c. Drivers are free to implement their own very special property parsers if needed. Properties can have default values. If unset they are zero-filled. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16Handle vga= in -appendPascal Terjan1-0/+19
Here is a patch I had sent twice to the list 2 years ago. Hopefuly this time someone will be interested It adds support for passing vga mode to linux kernel through vga= option in -append Signed-off-by: Pascal Terjan <pterjan@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16Add a pc-0-10 machine type for compatibility with 0.10.xMark McLoughlin1-6/+53
Add a pc-0-10 machine type to allow a pc machine to be created with virtio block and console devices compatibility with qemu-0.10.x. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29Replace -no-virtio-balloon by -balloonMarkus Armbruster1-2/+3
We want to do (at least) two things to the virtio-balloon device: suppress it, and control its PCI address. Option -no-virtio-balloon lets us do only the former. To get the latter, replace -no-virtio-balloon with -balloon none disable balloon device -balloon virtio[,addr=str] enable virtio balloon device (default) Syntax suggested by Anthony Liguori. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29x86: Factor out pc_new_cpuJan Kiszka1-14/+22
At this point, this refactoring looks like overkill. But we will need it for CPU hotplugging, and qemu-kvm already carries it. Merging it early would help qemu-kvm when rebasing against upstream. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka1-2/+2
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29Multiboot support v5Alexander Graf1-8/+238
This patch implements support for Multiboot on x86 for -kernel. Multiboot is a "new" approach to get rid of different bootloaders, providing a unified interface for the kernel. It supports command line options and kernel modules. The two probably best known projects using multiboot are Xen and GNU Hurd. This implementation should be mostly feature-complete. It is missing VBE extensions, but as no system uses them currently it does not really hurt. To use multiboot, specify the kernel as -kernel option. Modules should be given as -initrd options, seperated by a comma (,). -append also works. Please bear in mind that grub also does gzip decompression, which qemu does not do yet. To run existing images, please ungzip them first. The guest multiboot loader code is implemented as option rom using int 19. Parts of the work are based on efforts by Rene Rebe, who originally ported my code to int 19. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29Expose fw_cfg v2Alexander Graf1-2/+6
Multiboot passes options to the option rom using the fw_cfg device. Right now, that device is local to the bochs_bios_init function. Let's change that and expose it, so everyone may put data in there. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29Change bochs bios init orderAlexander Graf1-6/+6
For multiboot support, we need bochs_bios_init to happen before load_linux, so we get the fw_cfg device. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22Don't register cpu reset handler for cpu with APIC.Gleb Natapov1-7/+3
APIC reset handler already resets cpu, no need to reset it twice. Also register cpu_reset handler directly to make it impossible to add additional code to main_cpu_reset() by mistake. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22Support addr=... in option argument of -drive if=virtioMarkus Armbruster1-1/+4
Make drive_init() accept addr=, put the value into struct DriveInfo. Use it in all the places that create virtio-blk-pci devices: pc_init1(), bamboo_init(), mpc8544ds_init(). Don't support addr= in third argument of monitor command pci_add and second argument of drive_add, because that clashes with their first arguments. Admittedly unelegant. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22Support addr=... in option argument of -net nicMarkus Armbruster1-1/+1
Make net_client_init() accept addr=, put the value into struct NICinfo. Use it in pci_nic_init(), and remove arguments bus and devfn. Don't support addr= in third argument of monitor command pci_add, because that clashes with its first argument. Admittedly unelegant. Machines "malta" and "r2d" have a default NIC with a well-known PCI address. Deal with that the same way as the NIC model: make pci_nic_init() take an optional default to be used when the user doesn't specify one. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22acpi.c: make qemu_system_device_hot_add piix independent.Isaku Yamahata1-1/+1
introruce piix4_device_hot_add() for piix4 specific code and make qemu_system_device_hot_add() generic. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2025-02-06 01:26:05 +0000