aboutsummaryrefslogtreecommitdiff
path: root/hw/openrisc
AgeCommit message (Collapse)AuthorFilesLines
2022-05-15hw/openrisc: use right OMPIC size variableJason A. Donenfeld1-2/+2
This appears to be a copy and paste error. The UART size was used instead of the much smaller OMPIC size. But actually that smaller OMPIC size is wrong too and doesn't allow the IPI to work in Linux. So set it to the old value. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> [smh:Updated OR1KSIM_OMPIC size to use OR1KSIM_CPUS_MAX] Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-15hw/openrisc: support 4 serial ports in or1ksimJason A. Donenfeld1-6/+16
The 8250 serial controller supports 4 serial ports, so wire them all up, so that we can have more than one basic I/O channel. Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> [smh:Fixup indentation and lines over 80 chars] Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-05-04hw/openrisc: page-align FDT addressJason A. Donenfeld1-1/+1
The QEMU-provided FDT was only being recognized by the kernel when it was used in conjunction with -initrd. Without it, the magic bytes wouldn't be there and the kernel couldn't load it. This patch fixes the issue by page aligning the provided FDT. Cc: Stafford Horne <shorne@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-02-26hw/openrisc/openrisc_sim: Add support for initrd loadingStafford Horne1-0/+31
The initrd passed via the command line is loaded into memory. It's location and size is then added to the device tree so the kernel knows where to find it. Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-26hw/openrisc/openrisc_sim: Add automatic device tree generationStafford Horne2-16/+175
Using the device tree means that qemu can now directly tell the kernel what hardware is configured rather than use having to maintain and update a separate device tree file. This patch adds automatic device tree generation support for the OpenRISC simulator. A device tree is built up based on the state of the configure openrisc simulator. This is then dumped to memory and the load address is passed to the kernel in register r3. Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-25hw/openrisc/openrisc_sim: Increase max_cpus to 4Stafford Horne1-3/+5
Now that we no longer have a limit of 2 CPUs due to fixing the IRQ routing issues we can increase the max. Here we increase the limit to 4, we could go higher, but currently OMPIC has a limit of 4, so we align with that. Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-02-25hw/openrisc/openrisc_sim: Use IRQ splitter when connecting UARTStafford Horne1-8/+24
Currently the OpenRISC SMP configuration only supports 2 cores due to the UART IRQ routing being limited to 2 cores. As was done in commit 1eeffbeb11 ("hw/openrisc/openrisc_sim: Use IRQ splitter when connecting IRQ to multiple CPUs") we can use a splitter to wire more than 2 CPUs. This patch moves serial initialization out to it's own function and uses a splitter to connect multiple CPU irq lines to the UART. Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-02-25hw/openrisc/openrisc_sim: Parameterize initializationStafford Horne1-8/+34
Move magic numbers to variables and enums. These will be reused for upcoming fdt initialization. Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-02-25hw/openrisc/openrisc_sim: Create machine state for or1ksimStafford Horne1-2/+28
This will allow us to attach machine state attributes like the device tree fdt. Signed-off-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth1-1/+0
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-15target/openrisc: Move pic_cpu code into CPU object properPeter Maydell3-64/+2
The openrisc code uses an old style of interrupt handling, where a separate standalone set of qemu_irqs invoke a function openrisc_pic_cpu_handler() which signals the interrupt to the CPU proper by directly calling cpu_interrupt() and cpu_reset_interrupt(). Because CPU objects now inherit (indirectly) from TYPE_DEVICE, they can have GPIO input lines themselves, and the neater modern way to implement this is to simply have the CPU object itself provide the input IRQ lines. Create GPIO inputs to the OpenRISC CPU object, and make the only user of cpu_openrisc_pic_init() wire up directly to those instead. This allows us to delete the hw/openrisc/pic_cpu.c file entirely. This fixes a trivial memory leak reported by Coverity of the IRQs allocated in cpu_openrisc_pic_init(). Fixes: Coverity CID 1421934 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stafford Horne <shorne@gmail.com> Message-id: 20201127225127.14770-4-peter.maydell@linaro.org
2020-12-15hw/openrisc/openrisc_sim: Abstract out "get IRQ x of CPU y"Peter Maydell1-17/+21
We're about to refactor the OpenRISC pic_cpu code in a way that means that just grabbing the whole qemu_irq[] array of inbound IRQs for a CPU won't be possible any more. Abstract out a function for "return the qemu_irq for IRQ x input of CPU y" so we can more easily replace the implementation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stafford Horne <shorne@gmail.com> Message-id: 20201127225127.14770-3-peter.maydell@linaro.org
2020-12-15hw/openrisc/openrisc_sim: Use IRQ splitter when connecting IRQ to multiple CPUsPeter Maydell2-2/+12
openrisc_sim_net_init() attempts to connect the IRQ line from the ethernet device to both CPUs in an SMP configuration by simply caling sysbus_connect_irq() for it twice. This doesn't work, because the second connection simply overrides the first. Fix this by creating a TYPE_SPLIT_IRQ to split the IRQ in the SMP case. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stafford Horne <shorne@gmail.com> Message-id: 20201127225127.14770-2-peter.maydell@linaro.org
2020-08-21meson: convert hw/arch*Marc-André Lureau2-2/+5
Each architecture's sourceset is placed in an hw_arch dictionary, and picked up from there when building the per-emulator static_library. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-15sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster1-2/+2
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster1-4/+4
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-10hw/openrisc/openrisc_sim: Add assertion to silence GCC warningPhilippe Mathieu-Daudé1-0/+1
When compiling with GCC 10 (Fedora 32) using CFLAGS=-O2 we get: CC or1k-softmmu/hw/openrisc/openrisc_sim.o hw/openrisc/openrisc_sim.c: In function ‘openrisc_sim_init’: hw/openrisc/openrisc_sim.c:87:42: error: ‘cpu_irqs[0]’ may be used uninitialized in this function [-Werror=maybe-uninitialized] 87 | sysbus_connect_irq(s, i, cpu_irqs[i][irq_pin]); | ~~~~~~~~^~~ While humans can tell smp_cpus will always be in the [1, 2] range, (openrisc_sim_machine_init sets mc->max_cpus = 2), the compiler can't. Add an assertion to give the compiler a hint there's no use of uninitialized data. Buglink: https://bugs.launchpad.net/qemu/+bug/1874073 Reported-by: Martin Liška <mliska@suse.cz> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Stafford Horne <shorne@gmail.com> Message-Id: <20200608160611.16966-1-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-02-28hw: Make MachineClass::is_default a boolean typePhilippe Mathieu-Daudé1-1/+1
There's no good reason for it to be type int, change it to bool. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200207161948.15972-3-philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-01-29hw/core/loader: Let load_elf() populate a field with CPU-specific flagsAleksandar Markovic1-1/+1
While loading the executable, some platforms (like AVR) need to detect CPU type that executable is built for - and, with this patch, this is enabled by reading the field 'e_flags' of the ELF header of the executable in question. The change expands functionality of the following functions: - load_elf() - load_elf_as() - load_elf_ram() - load_elf_ram_sym() The argument added to these functions is called 'pflags' and is of type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word' being the type of the field 'e_flags', in both 32-bit and 64-bit variants of ELF header). Callers are allowed to pass NULL as that argument, and in such case no lookup to the field 'e_flags' will happen, and no information will be returned, of course. CC: Richard Henderson <rth@twiddle.net> CC: Peter Maydell <peter.maydell@linaro.org> CC: Edgar E. Iglesias <edgar.iglesias@gmail.com> CC: Michael Walle <michael@walle.cc> CC: Thomas Huth <huth@tuxfamily.org> CC: Laurent Vivier <laurent@vivier.eu> CC: Philippe Mathieu-Daudé <f4bug@amsat.org> CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> CC: Aurelien Jarno <aurelien@aurel32.net> CC: Jia Liu <proljc@gmail.com> CC: David Gibson <david@gibson.dropbear.id.au> CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: BALATON Zoltan <balaton@eik.bme.hu> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: Thomas Huth <thuth@redhat.com> CC: Artyom Tarasenko <atar4qemu@gmail.com> CC: Fabien Chouteau <chouteau@adacore.com> CC: KONRAD Frederic <frederic.konrad@adacore.com> CC: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster3-3/+0
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster2-0/+2
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16Include sysemu/reset.h a lot lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-07-05hw: Replace global smp variables with MachineState for all remaining archsLike Xu1-0/+1
The global smp variables in alpha/hppa/mips/openrisc/sparc*/xtensa codes are replaced with smp properties from MachineState. A local variable of the same name would be introduced in the declaration phase if it's used widely in the context OR replace it on the spot if it's only used once. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190518205428.90532-10-like.xu@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster1-1/+0
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-05-08target/openrisc: Fix LGPL information in the file headersThomas Huth3-3/+3
It's either "GNU *Library* General Public License version 2" or "GNU Lesser General Public License version *2.1*", but there was no "version 2.0" of the "Lesser" license. So assume that version 2.1 is meant here. Acked-by: Stafford Horne <shorne@gmail.com> Message-Id: <1550073577-4248-1-git-send-email-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-03-07or1k-softmmu.mak: express dependencies with KconfigPaolo Bonzini1-0/+3
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini1-0/+2
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/openrisc/Makefile.objs: Create CONFIG_* for openriscYang Zhong1-1/+1
Add the new configs to default-configs/or1k-sofmmu.mak. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-25-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05elf: Add optional function ptr to load_elf() to parse ELF notesLiam Merwick1-1/+1
This patch adds an optional function pointer, 'elf_note_fn', to load_elf() which causes load_elf() to additionally parse any ELF program headers of type PT_NOTE and check to see if the ELF Note is of the type specified by the 'translate_opaque' arg. If a matching ELF Note is found then the specfied function pointer is called to process the ELF note. Passing a NULL function pointer results in ELF Notes being skipped. The first consumer of this functionality is the PVHboot support which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while loading the uncompressed kernel binary in order to discover the boot entry address for the x86/HVM direct boot ABI. Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-04-26Change references to serial_hds[] to serial_hd()Peter Maydell1-1/+1
Change all the uses of serial_hds[] to go via the new serial_hd() function. Code change produced with: find hw -name '*.[ch]' | xargs sed -i -e 's/serial_hds\[\([^]]*\)\]/serial_hd(\1)/g' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20180420145249.32435-8-peter.maydell@linaro.org
2018-02-06hw/openrisc: Replace fprintf(stderr, "*\n" with error_report()Alistair Francis1-2/+2
Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Jia Liu <proljc@gmail.com> Cc: Stafford Horne <shorne@gmail.com> Acked-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-8-armbru@redhat.com>
2017-10-27openrisc: use generic cpu_model parsingIgor Mammedov1-6/+2
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-19-git-send-email-imammedo@redhat.com> Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-21openrisc: Only kick cpu on timeout, not on updateStafford Horne1-1/+1
Previously we were kicking the cpu on every update. This caused problems noticeable in SMP configurations where one CPU got pinned continuously servicing timer exceptions. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-10-21openrisc: Initial SMP supportStafford Horne1-23/+65
Wire in ompic and add basic support for SMP. The OpenRISC is special in that interrupts for devices are routed to each core's PIC. This is achieved using the qemu_irq_split utility, but this currently limits OpenRISC to 2 cores. This models the reference architecture described in the OpenRISC spec 1.2 proposal. https://github.com/stffrdhrn/doc/raw/arch-1.2-proposal/openrisc-arch-1.2-rev0.pdf The changes to the intialization of the sim include: CPU Reset o Reset each cpu to the bootstrap PC rather than only a single cpu as done before. o During Kernel loading the bootstrap PC is saved in a static global. Network Initialization o Connect the interrupt to each CPU o Use more simple sysbus_mmio_map() rather than memory_region_add_subregion() Sim Initialization o Initialize the pic and tick timer per cpu o Wire in the OMPIC if SMP is enabled o Wire the serial irq to each CPU using qemu_irq_split() Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-10-21openrisc/cputimer: Perparation for MulticoreStafford Horne1-15/+47
In order to support multicore system we move some of the previously static state variables into the state of each core. On the other hand in order to allow timers to be synced between each code the ttcr (tick timer count register) is moved out of the core. This is not as per real hardware spec which has a separate timer counter per core, but it seems the most simple way to keep each clock in sync. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-09-19cpu: make cpu_generic_init() abort QEMU on errorIgor Mammedov1-4/+0
Almost every user of cpu_generic_init() checks for returned NULL and then reports failure in a custom way and aborts process. Some users assume that call can't fail and don't check for failure, though they should have checked for it. In either cases cpu_generic_init() failure is fatal, so instead of checking for failure and reporting it various ways, make cpu_generic_init() report errors in consistent way and terminate QEMU on failure. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1505318697-77161-3-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-01openrisc: replace cpu_openrisc_init() with cpu_generic_init()Igor Mammedov1-1/+1
it's just a wrapper, drop it and use cpu_generic_init() directly Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1503592308-93913-24-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-07-14hw: Use new memory_region_init_{ram, rom, rom_device}() functionsPeter Maydell1-2/+1
Use the new functions memory_region_init_{ram,rom,rom_device}() instead of manually calling the _nomigrate() version and then vmstate_register_ram_global(). Patch automatically created using coccinelle script: spatch --in-place -sp_file scripts/coccinelle/memory-region-init-ram.cocci -dir hw (As it turns out, there are no instances of the rom and rom_device functions that are caught by this script.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1499438577-7674-8-git-send-email-peter.maydell@linaro.org
2017-07-14memory: Rename memory_region_init_ram() to memory_region_init_ram_nomigrate()Peter Maydell1-1/+1
Rename memory_region_init_ram() to memory_region_init_ram_nomigrate(). This leaves the way clear for us to provide a memory_region_init_ram() which does handle migration. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1499438577-7674-4-git-send-email-peter.maydell@linaro.org
2017-05-04target/openrisc: Support non-busy idle state using PMR SPRStafford Horne1-0/+1
The OpenRISC architecture has the Power Management Register (PMR) special purpose register to manage cpu power states. The interesting modes are: * Doze Mode (DME) - Stop cpu except timer & pic - wake on interrupt * Sleep Mode (SME) - Stop cpu and all units - wake on interrupt * Suspend Model (SUME) - Stop cpu and all units - wake on reset The linux kernel will set DME when idle. This patch implements the PMR SPR and halts the qemu cpu when there is a change to DME or SME. This means that openrisc qemu in no longer peggs a host cpu at 100%. In order for this to work we need to kick the CPU when timers are expired. Update the cpu timer to kick the cpu upon each timer event. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-02-14target/openrisc: Rename the cpu from or32 to or1kRichard Henderson1-2/+2
This is in keeping with the toolchain and or1ksim. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-03-22hw: explicitly include qemu-common.h and cpu.hPaolo Bonzini1-0/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster1-0/+1
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-04loader: Add data swap option to load-elfPeter Crosthwaite1-1/+2
Some CPUs are of an opposite data-endianness to other components in the system. Sometimes elfs have the data sections layed out with this CPU data-endianness accounting for when loaded via the CPU, so byte swaps (relative to other system components) will occur. The leading example, is ARM's BE32 mode, which is is basically LE with address manipulation on half-word and byte accesses to access the hw/byte reversed address. This means that word data is invariant across LE and BE32. This also means that instructions are still LE. The expectation is that the elf will be loaded via the CPU in this endianness scheme, which means the data in the elf is reversed at compile time. As QEMU loads via the system memory directly, rather than the CPU, we need a mechanism to reverse elf data endianness to implement this possibility. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-29openrisc: Clean up includesPeter Maydell3-0/+3
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-30-git-send-email-peter.maydell@linaro.org
2015-09-25Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+1
* First batch of MAINTAINERS updates * IOAPIC fixes (to pass kvm-unit-tests with -machine kernel_irqchip=off) * NBD API upgrades from Daniel * strtosz fixes from Marc-André * improved support for readonly=on on scsi-generic devices * new "info ioapic" and "info lapic" monitor commands * Peter Crosthwaite's ELF_MACHINE cleanups * docs patches from Thomas and Daniel # gpg: Signature made Fri 25 Sep 2015 11:20:52 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (52 commits) doc: Refresh URLs in the qemu-tech documentation docs: describe the QEMU build system structure / design typedef: add typedef for QemuOpts i386: interrupt poll processing i386: partial revert of interrupt poll fix ppc: Rename ELF_MACHINE to be PPC specific i386: Rename ELF_MACHINE to be x86 specific alpha: Remove ELF_MACHINE from cpu.h mips: Remove ELF_MACHINE from cpu.h sparc: Remove ELF_MACHINE from cpu.h s390: Remove ELF_MACHINE from cpu.h sh4: Remove ELF_MACHINE from cpu.h xtensa: Remove ELF_MACHINE from cpu.h tricore: Remove ELF_MACHINE from cpu.h or32: Remove ELF_MACHINE from cpu.h lm32: Remove ELF_MACHINE from cpu.h unicore: Remove ELF_MACHINE from cpu.h moxie: Remove ELF_MACHINE from cpu.h cris: Remove ELF_MACHINE from cpu.h m68k: Remove ELF_MACHINE from cpu.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-25openrisc: remove muldiv64()Laurent Vivier1-4/+3
Originally, timers were ticks based, and it made sense to add ticks to current time to know when to trigger an alarm. But since commit: 7447545 change all other clock references to use nanosecond resolution accessors All timers use nanoseconds and we need to convert ticks to nanoseconds, by doing something like: y = muldiv64(x, get_ticks_per_sec(), TIMER_FREQ) where x is the number of device ticks and y the number of system ticks. y is used as nanoseconds in timer functions, it works because 1 tick is 1 nanosecond. (get_ticks_per_sec() is 10^9) But as openrisc timer frequency is 20 MHz, we can also do: y = x * 50; /* 20 MHz period is 50 ns */ Signed-off-by: Laurent Vivier <lvivier@redhat.com>
2015-09-25or32: Remove ELF_MACHINE from cpu.hPeter Crosthwaite1-1/+1
The only generic code relying on this is linux-user, but linux users' default behaviour of defaulting ELF_MACHINE to ELF_ARCH will handle this. The bootloader can just pass EM_OPENRISC directly, as that is architecture specific code. This removes another architecture specific definition from the global namespace. Cc: Jia Liu <proljc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Acked-By: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-12-26 08:08:10 +0000