aboutsummaryrefslogtreecommitdiff
path: root/hw/nvram
AgeCommit message (Collapse)AuthorFilesLines
2014-06-27spapr: Fix RTAS token numbersAlexey Kardashevskiy1-2/+2
At the moment spapr_rtas_register() allocates a new token number for every new RTAS callback so numbers are not fixed and depend on the number of supported RTAS handlers and the exact order of spapr_rtas_register() calls. These tokens are copied into the device tree and remain the same during the guest lifetime. When we start another guest to receive a migration, it calls spapr_rtas_register() as well. If the number of RTAS handlers or their order is different in QEMU on source and destination sides, the "/rtas" node in the device tree will differ. Since migration overwrites the device tree (as it overwrites the entire RAM), the actual RTAS config on the destination side gets broken. This defines global contant values for every RTAS token which QEMU is using today. This changes spapr_rtas_register() to accept a token number instead of allocating one. This changes all users of spapr_rtas_register(). This changes XICS-KVM not to cache tokens registered with KVM as they constant now. This makes TOKEN_BASE global as RTAS_XXX use TOKEN_BASE as a base. TOKEN_MAX is moved and renamed too and its value is changed to the last token + 1. Boundary checks for token values are adjusted. This reserves token numbers for "os-term" handlers and PCI hotplug which we are working on. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16spapr_nvram: Correct max nvram sizeAlexey Kardashevskiy1-1/+1
Currently it is UINT16_MAX*16 = 65536*16 = 1048560 which is not a round number and therefore a bit confusing. This defines MAX_NVRAM_SIZE precisely as 1MB. Suggested-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (x86)Juan Quintela2-4/+2
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-14savevm: Remove all the unneeded version_minimum_id_old (rest)Juan Quintela2-3/+1
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-20vl.c: Extend get_boot_devices_list() to ignore suffixesAlexey Kardashevskiy1-1/+1
As suffixes do not make sense for sPAPR's device tree and there is no way to filter them out on the BusState::get_fw_dev_path() level, let's add an ability for the external caller to specify whether to apply suffixes or not. We could handle suffixes in SLOF (ignored for now) but this would require serious rework in the node opening code in SLOF, which has no obvious benefit for the currently emulated sPAPR machine. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14qdev: Remove hex8/32/64 property typesPaolo Bonzini1-2/+2
Replace them with uint8/32/64. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23sysbus: Set cannot_instantiate_with_device_add_yetMarkus Armbruster1-1/+0
device_add plugs devices into suitable bus. For "real" buses, that actually connects the device. For sysbus, the connections need to be made separately, and device_add can't do that. The device would be left unconnected, and could not possibly work. Quite a few, but not all sysbus devices already set cannot_instantiate_with_device_add_yet in their class init function. Set it in their abstract base's class init function sysbus_device_class_init(), and remove the now redundant assignments from device class init functions. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23qdev: Replace no_user by cannot_instantiate_with_device_add_yetMarkus Armbruster1-1/+1
In an ideal world, machines can be built by wiring devices together with configuration, not code. Unfortunately, that's not the world we live in right now. We still have quite a few devices that need to be wired up by code. If you try to device_add such a device, it'll fail in sometimes mysterious ways. If you're lucky, you get an unmysterious immediate crash. To protect users from such badness, DeviceClass member no_user used to make device models unavailable with -device / device_add, but that regressed in commit 18b6dad. The device model is still omitted from help, but is available anyway. Attempts to fix the regression have been rejected with the argument that the purpose of no_user isn't clear, and it's prone to misuse. This commit clarifies no_user's purpose. Anthony suggested to rename it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which I shorten somewhat to keep checkpatch happy. While there, make it bool. Every use of cannot_instantiate_with_device_add_yet gets a FIXME comment asking for rationale. The next few commits will clean them all up, either by providing a rationale, or by getting rid of the use. With that done, the regression fix is hopefully acceptable. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-20spapr-rtas: replace return code constants with macrosAlexey Kardashevskiy1-8/+8
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-12-06eeprom93xx: fix coding styleAntony Pavlov1-31/+31
scripts/checkpatch.pl reports about some style problems, this commit fixes some of them: ERROR: space prohibited before open square bracket '[' + .fields = (VMStateField []) { ERROR: space prohibited after that '!' (ctx:BxW) + if (! eeprom->eecs && eecs) { ^ ERROR: space prohibited after that '!' (ctx:WxW) + } else if (eeprom->eecs && ! eecs) { ^ ERROR: space prohibited after that '!' (ctx:WxW) + } else if (eecs && ! eeprom->eesk && eesk) { ^ ERROR: switch and case should be at the same indent switch (address >> (eeprom->addrbits - 2)) { + case 0: [...] + case 1: [...] + case 2: [...] + case 3: ERROR: return is not a function, parentheses are not required + return (eeprom->eedo); ERROR: switch and case should be at the same indent switch (nwords) { + case 16: + case 64: [...] + case 128: + case 256: [...] + default: Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Cc: Stefan Weil <sw@weilnetz.de> Reviewed-by: Stefan Weil <sw@weilnetz.de> Cc: qemu-trivial@nongnu.org Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-11-08spapr: add vio-bus devices to categoriesAlexey Kardashevskiy1-0/+1
In order to get devices appear in output of "./qemu-system-ppc64 -device ?", they must be assigned to one of DEVICE_CATEGORY_XXXX. This puts VIO devices classes to corresponding categories. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-14fw_cfg: interface to trigger callback on readMichael S. Tsirkin1-5/+28
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-07fw_cfg: the I/O port variant expects little-endianPaolo Bonzini1-1/+1
The I/O port variant of fw_cfg is used by sparc64, which is a big-endian machine. Firmware swaps bytes before sending them to fw_cfg, so we need to unswap them in the device. This is only used on sparc64 and on (little-endian) x86, so it does not affect any other target. 32-bit Sparc and PPC all use memory-mapped fw_cfg. Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-id: 1375014954-31916-2-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-29ds1225y: QOM cast cleanup for SysBusNvRamStateAndreas Färber1-3/+8
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29ds1225y: Drop bogus qdev field from NvRamStateAndreas Färber1-1/+0
It is not a device, and the field is not used from code either. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23fw_cfg: Use QOM realize for fw_cfgHu Tao1-10/+17
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> [AF: Moved sysbus_init_mmio() to instance_init, renamed variable] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23fwcfg: QOM'ify some moreHu Tao1-7/+10
Use type constant if possible and avoid DO_UPCAST(). Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> [AF: Renamed parent field] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-04hw/n*: pass owner to memory_region_init* functionsPaolo Bonzini3-6/+7
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini3-5/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-01spapr-rtas: add CPU argument to RTAS callsAnthony Liguori1-2/+2
RTAS is a hypervisor provided binary blob that a guest loads and calls into to execute certain functions. It's similar to the vsyscall page in Linux or the short lived VMCI paravirt interface from VMware. The QEMU implementation of the RTAS blob is simply a passthrough that proxies all RTAS calls to the hypervisor via an hypercall. While we pass a CPU argument for hypercall handling in QEMU, we don't pass it for RTAS calls. Since some RTAs calls require making hypercalls (normally RTAS is implemented as guest code) we have nasty hacks to allow that. Add a CPU argument to RTAS call handling so we can more easily invoke hypercalls just as guest code would. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-06-02fw_cfg: fw_cfg is a singletonMichael S. Tsirkin1-4/+3
Make sure we only have a single instance ever: because if it isn't we can't find it so it's useless anyway. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-02fw_cfg: add API to find FW cfg objectMichael S. Tsirkin1-3/+12
Remove some code duplication by adding a function to look up the fw cfg file. This way, we don't need to duplicate same strings everywhere. Use by both fw cfg and pvpanic device. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-02firmware_abi: move to include/hw/nvram/Michael S. Tsirkin1-1/+1
firmware_abi.h with structs for OpenBIOS landed in hw/sparc/ by mistake - move it to hw/nvram/ alongside fw_cfg.h. In addition to sparc it's included from ppc mac_nvram.c and will need to include it from prep.c in the future. Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-05-22glib: Fix some misuses of gsize/size_t typesPeter Crosthwaite1-2/+2
This unbreaks cross compile builds: configure --target-list="i386-softmmu" --cpu=i386 When building on a 64bit machine. Reported-by: David Holsgrove <david.holsgrove@xilinx.com> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Message-id: 926326e96fd8685d74e9d5bf430fe4ad97a55289.1369191585.git.peter.crosthwaite@xilinx.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-30pvpanic: pass configurable ioport to seabiosHu Tao1-1/+7
This lets seabios patch the corresponding SSDT entry. Also add fw_cfg object to /machine/fw_cfg so we can reference it elsewhere. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 60c65d95fe2b23b12bea67099126566010a11a1a.1366945969.git.hutao@cn.fujitsu.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-26pseries: Convert VIO code to QOM style type safe(ish) castsDavid Gibson1-3/+7
Curerntly the pseries VIO device code contains quite a few explicit uses of DO_UPCAST and plain C casts. This is (obviously) type unsafe, and not the conventional way of doing things in the QOM model. This patch converts the code to use the QOM convention of per-type macros to do verified casts with OBJECT_CHECK(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-08hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/Paolo Bonzini2-0/+197
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini5-0/+1276
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: make subdirectories for devicesPaolo Bonzini1-0/+0
Prepare the new directory structure. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-12-28 11:02:04 +0000