aboutsummaryrefslogtreecommitdiff
path: root/hw/nvram
AgeCommit message (Collapse)AuthorFilesLines
2019-11-05Merge remote-tracking branch ↵Peter Maydell1-3/+4
'remotes/philmd-gitlab/tags/fw_cfg-next-pull-request' into staging Fix the fw_cfg reboot-timeout=-1 special value, add a test for it. # gpg: Signature made Sun 03 Nov 2019 22:21:02 GMT # gpg: using RSA key 89C1E78F601EE86C867495CBA2A3FD6EDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (Phil) <philmd@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 89C1 E78F 601E E86C 8674 95CB A2A3 FD6E DEAD C0DE * remotes/philmd-gitlab/tags/fw_cfg-next-pull-request: tests/fw_cfg: Test 'reboot-timeout=-1' special value fw_cfg: Allow reboot-timeout=-1 again Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-11-01fw_cfg: Allow reboot-timeout=-1 againDr. David Alan Gilbert1-3/+4
Commit ee5d0f89de3e53cdb0dc added range checking on reboot-timeout to only allow the range 0..65535; however both qemu and libvirt document the special value -1 to mean don't reboot. Allow it again. Fixes: ee5d0f89de3e53cdb0dc ("fw_cfg: Fix -boot reboot-timeout error checking") RH bz: https://bugzilla.redhat.com/show_bug.cgi?id=1765443 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20191025165706.177653-1-dgilbert@redhat.com> Suggested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <37ac197c-f20e-dd05-ff6a-13a2171c7148@redhat.com> [PMD: Applied Laszlo's suggestions] Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-10-31bootdevice: FW_CFG interface for LCHS valuesSam Eiderman1-3/+11
Using fw_cfg, supply logical CHS values directly from QEMU to the BIOS. Non-standard logical geometries break under QEMU. A virtual disk which contains an operating system which depends on logical geometries (consistent values being reported from BIOS INT13 AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard logical geometries - for example 56 SPT (sectors per track). No matter what QEMU will report - SeaBIOS, for large enough disks - will use LBA translation, which will report 63 SPT instead. In addition we cannot force SeaBIOS to rely on physical geometries at all. A virtio-blk-pci virtual disk with 255 phyiscal heads cannot report more than 16 physical heads when moved to an IDE controller, since the ATA spec allows a maximum of 16 heads - this is an artifact of virtualization. By supplying the logical geometries directly we are able to support such "exotic" disks. We serialize this information in a similar way to the "bootorder" interface. The new fw_cfg entry is "bios-geometry". Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com> Signed-off-by: Sam Eiderman <sameid@google.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2019-10-22fw_cfg: add "modify" functions for all typesSergio Lopez1-0/+29
This allows to alter the contents of an already added item. Signed-off-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster1-0/+2
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster6-0/+6
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster5-5/+0
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster6-0/+6
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include migration/qemu-file-types.h a lot lessMarkus Armbruster2-0/+2
In my "build everything" tree, changing migration/qemu-file-types.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The culprit is again hw/hw.h, which supposedly includes it for convenience. Include migration/qemu-file-types.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-10-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include sysemu/reset.h a lot lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster1-0/+1
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster5-1/+6
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-05-23hw/nvram/fw_cfg: Store 'reboot-timeout' as little endianLi Qiang1-1/+3
The current codebase is not specific about the endianess of the fw_cfg 'file' entry 'reboot-timeout'. Per docs/specs/fw_cfg.txt: === All Other Data Items === Please consult the QEMU source for the most up-to-date and authoritative list of selector keys and their respective items' purpose, format and writeability. Checking the git history, this code was introduced in commit ac05f3492421, very similar to commit 3d3b8303c6f8 for the 'boot-menu-wait' entry, which explicitely use little-endian. OVMF consumes 'boot-menu-wait' as little-endian, however it does not consume 'reboot-timeout'. Regarding the git history and OVMF use, we choose to explicit 'reboot-timeout' endianess as little-endian. Signed-off-by: Li Qiang <liq3ea@163.com> Tested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190424140643.62457-4-liq3ea@163.com> [PMD: Reword commit description based on review comments] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-05-23hw/nvram/fw_cfg: Add fw_cfg_arch_key_name()Philippe Mathieu-Daudé1-1/+1
Add fw_cfg_arch_key_name() which returns the name of an architecture-specific key. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190422195020.1494-3-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-05-23hw/nvram/fw_cfg: Add trace eventsPhilippe Mathieu-Daudé2-2/+68
Add trace events to dump the key content. Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190422195020.1494-2-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster1-2/+2
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-12Merge remote-tracking branch ↵Peter Maydell1-5/+4
'remotes/vivier2/tags/trivial-branch-pull-request' into staging fw_cfg and thunk code clean up # gpg: Signature made Mon 11 Mar 2019 19:11:03 GMT # gpg: using RSA key F30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: hw/nvram/fw_cfg: Use the ldst API hw/arm/virt: Remove null-check in virt_build_smbios() hw/i386: Remove unused include hw/nvram/fw_cfg: Remove the unnecessary boot_splash_filedata_size thunk: improve readability of allocation loop Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-12spapr: Use CamelCase properlyDavid Gibson1-21/+21
The qemu coding standard is to use CamelCase for type and structure names, and the pseries code follows that... sort of. There are quite a lot of places where we bend the rules in order to preserve the capitalization of internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR". That was a bad idea - it frequently leads to names ending up with hard to read clusters of capital letters, and means they don't catch the eye as type identifiers, which is kind of the point of the CamelCase convention in the first place. In short, keeping type identifiers look like CamelCase is more important than preserving standard capitalization of internal "words". So, this patch renames a heap of spapr internal type names to a more standard CamelCase. In addition to case changes, we also make some other identifier renames: VIOsPAPR* -> SpaprVio* The reverse word ordering was only ever used to mitigate the capital cluster, so revert to the natural ordering. VIOsPAPRVTYDevice -> SpaprVioVty VIOsPAPRVLANDevice -> SpaprVioVlan Brevity, since the "Device" didn't add useful information sPAPRDRConnector -> SpaprDrc sPAPRDRConnectorClass -> SpaprDrcClass Brevity, and makes it clearer this is the same thing as a "DRC" mentioned in many other places in the code This is 100% a mechanical search-and-replace patch. It will, however, conflict with essentially any and all outstanding patches touching the spapr code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-11hw/nvram/fw_cfg: Use the ldst APIPhilippe Mathieu-Daudé1-2/+2
The load/store API eases code review. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190309181920.30553-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-11hw/nvram/fw_cfg: Remove the unnecessary boot_splash_filedata_sizePhilippe Mathieu-Daudé1-3/+2
The 'boot_splash_filedata_size' was introduced as a global variable in 3d3b8303c6f. This variable is used as a 'size' argument to the fw_cfg_add_file(). This function has an interface contract with its 'data' argument, but there is no such contract for 'size' (this is not a referenced pointer). We can simply remove it. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190308013222.12524-7-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-07i2c: express dependencies with KconfigPaolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-38-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini1-0/+8
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-27i2c: have I2C receive operation return uint8_tCorey Minyard1-2/+2
It is never supposed to fail and cannot return an error, so just have it return the proper type. Have it return 0xff on nothing available, since that's what would happen on a real bus. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-05fw_cfg: fix the life cycle and the name of "qemu_extra_params_fw"Laszlo Ersek1-4/+5
Commit 19bcc4bc3213 ("fw_cfg: Make qemu_extra_params_fw locally", 2019-01-04) changed the storage duration of the "qemu_extra_params_fw" array from static to automatic. This broke the interface contract on the fw_cfg_add_file() function, which is documented as follows, in "include/hw/nvram/fw_cfg.h": > [...] The data referenced by the starting pointer is only linked, NOT > copied, into the data structure of the fw_cfg device. [...] As a result, when guest firmware fetches the "etc/boot-menu-wait" fw_cfg file, it now sees garbage. Fix the regression by changing the storage duration to allocated. (The call is reached at most once, on the realize path of the board-specific fw_cfg sysbus device.) While at it, clean up the name and the assignment of the object as well. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Fixes: 19bcc4bc3213e78c303ad480a7a578f62258252d Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-01hw/nvram/nrf51_nvm: Add nRF51 non-volatile memoriesSteffen Görtz2-0/+389
The nRF51 contains three regions of non-volatile memory (NVM): - CODE (R/W): contains code - FICR (R): Factory information like code size, chip id etc. - UICR (R/W): Changeable configuration data. Lock bits, Code protection configuration, Bootloader address, Nordic SoftRadio configuration, Firmware configuration. Read and write access to the memories is managed by the Non-volatile memory controller. Memory schema: [ CPU ] -+- [ NVM, either FICR, UICR or CODE ] | | \- [ NVMC ] Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190201023357.22596-2-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-09trivial: Don't include isa.h if it is not really necessaryThomas Huth1-1/+0
These files don't seem to do anything related to ISA directly, so there is no need to include isa.h here. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1546615943-16274-1-git-send-email-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-04fw_cfg: Make qemu_extra_params_fw locallyLi Qiang1-0/+1
qemu_extra_params_fw[] has external linkage, but is used only in fw_cfg_bootsplash(), it makes sense to make it locally. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1542777026-2788-4-git-send-email-liq3ea@gmail.com> [PMD: Removed qemu_extra_params_fw declaration in vl.c] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04fw_cfg: Fix -boot reboot-timeout error checkingLi Qiang1-14/+13
fw_cfg_reboot() gets option parameter "reboot-timeout" with qemu_opt_get(), then converts it to an integer by hand. It neglects to check that conversion for errors, and fails to reject negative values. Positive values above the limit get reported and replaced by the limit. This patch checks for conversion errors properly, and reject all values outside 0...0xffff. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1542777026-2788-3-git-send-email-liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04fw_cfg: Fix -boot bootsplash error checkingLi Qiang1-22/+13
fw_cfg_bootsplash() gets option parameter "splash-time" with qemu_opt_get(), then converts it to an integer by hand. It neglects to check that conversion for errors. This is needlessly complicated and error-prone. But as "splash-time not specified" is not the same as "splash-time=T" for any T, we need use qemu_opt_get() to check if splash time exists. This patch also make the qemu exit when finding or loading splash file failed. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1542777026-2788-2-git-send-email-liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04fw_cfg: Improve error message when can't load splash fileLi Qiang1-4/+3
read_splashfile() reports "failed to read splash file" without further details. Get the details from g_file_get_contents(), and include them in the error message. Also remove unnecessary 'res' variable. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1541052148-28752-1-git-send-email-liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2018-12-13nvram/ds1225y: Convert sysbus init function to realize functionMao Zhongyi1-7/+5
Use DeviceClass rather than SysBusDeviceClass in nvram_sysbus_class_init(). Cc: pbonzini@redhat.com Cc: marcandre.lureau@redhat.com Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181130093852.20739-15-maozhongyi@cmss.chinamobile.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-27vmstate: constify VMStateFieldMarc-André Lureau2-6/+6
Because they are supposed to remain const. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-30ppc: move at24c to its own CONFIG_ symbolPaolo Bonzini1-1/+1
AT24c EEPROM is currently gated by CONFIG_I2C, and as such it is being included in all emulators that use I2C, even if they do not really need it. Separate it and, since it was added for the e500 machines, add it to qemu-system-ppc and qemu-system-ppc64. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20180522191743.12872-1-pbonzini@redhat.com> [lv: rebase] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-02hw/nvram/fw_cfg: Use memberwise copy of MemoryRegionOps structPeter Maydell1-6/+1
We've now removed the 'old_mmio' member from MemoryRegionOps, so we can perform the copy as a simple struct copy rather than having to do it via a memberwise copy. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180824170422.5783-3-peter.maydell@linaro.org> Based-on: <20180802174042.29234-1-peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02fw_cfg_mem: add read memory region callbackLi Qiang1-0/+6
Signed-off-by: Li Qiang <liq3ea@gmail.com> Message-Id: <20180912160118.21158-2-liq3ea@163.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-16fw_cfg: ignore suffixes in the bootdevice list dependent on machine classMark Cave-Ayland1-1/+1
For the older machines (such as Mac and SPARC) the DT nodes representing bootdevices for disk nodes are irregular for mainly historical reasons. Since the majority of bootdevice nodes for these machines either do not have a separate disk node or require different (custom) names then it is much easier for processing to just disable all suffixes for a particular machine. Introduce a new ignore_boot_device_suffixes MachineClass property to control bootdevice suffix generation, defaulting to false in order to preserve compatibility. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20180810124027.10698-1-mark.cave-ayland@ilande.co.uk> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-07-02hw/ppc: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé1-4/+7
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20180625124238.25339-33-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-13/+11
* Linux header upgrade (Peter) * firmware.json definition (Laszlo) * IPMI migration fix (Corey) * QOM improvements (Alexey, Philippe, me) * Memory API cleanups (Jay, me, Tristan, Peter) * WHPX fixes and improvements (Lucian) * Chardev fixes (Marc-André) * IOMMU documentation improvements (Peter) * Coverity fixes (Peter, Philippe) * Include cleanup (Philippe) * -clock deprecation (Thomas) * Disable -sandbox unless CONFIG_SECCOMP (Yi Min Zhao) * Configurability improvements (me) # gpg: Signature made Fri 01 Jun 2018 17:42:13 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (56 commits) hw: make virtio devices configurable via default-configs/ hw: allow compiling out SCSI memory: Make operations using MemoryRegionIoeventfd struct pass by pointer. char: Remove unwanted crlf conversion qdev: Remove DeviceClass::init() and ::exit() qdev: Simplify the SysBusDeviceClass::init path hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init target/i386/kvm.c: Remove compatibility shim for KVM_HINTS_REALTIME Update Linux headers to 4.17-rc6 target/i386/kvm.c: Handle renaming of KVM_HINTS_DEDICATED scripts/update-linux-headers: Handle kernel license no longer being one file scripts/update-linux-headers: Handle __aligned_u64 virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhere gdbstub: Prevent fd leakage docs/interop: add "firmware.json" ipmi: Use proper struct reference for KCS vmstate vmstate: Add a VSTRUCT type tcg: remove softfloat from --disable-tcg builds qemu-options: Mark the non-functional -clock option as deprecated ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::initPhilippe Mathieu-Daudé1-13/+11
I2CSlaveClass::init is no more used, remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-3-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-3-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-31Make MemoryRegion valid.accepts callback take a MemTxAttrs argumentPeter Maydell1-4/+8
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to the MemoryRegion valid.accepts callback. We'll need this for subpage_accepts(). We could take the approach we used with the read and write callbacks and add new a new _with_attrs version, but since there are so few implementations of the accepts hook we just change them all. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-9-peter.maydell@linaro.org
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster1-0/+2
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Clean up includesMarkus Armbruster1-2/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes, with the change to target/s390x/gen-features.c manually reverted, and blank lines around deletions collapsed. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-3-armbru@redhat.com>
2018-02-05i2c: Add a CONFIG_I2C master switch to the configuration filesThomas Huth1-1/+1
The i2c core and the at24c EEPROM should only be compiled and linked on the machines that support i2c. Otherwise it's quite strange to see the at24c-eeprom to be "available" on qemu-system-s390x for example. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1516634853-15883-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-19fw_cfg: fix memory corruption when all fw_cfg slots are usedMarcel Apfelbaum1-2/+4
When all the fw_cfg slots are used, a write is made outside the bounds of the fw_cfg files array as part of the sort algorithm. Fix it by avoiding an unnecessary array element move. Fix also an assert while at it. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <20180108215007.46471-1-marcel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-01-16mips: fix potential fopen(NULL,...)Marc-André Lureau1-2/+2
Spotted thanks to ASAN. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180104160523.22995-18-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-15nvram: add AT24Cx i2c eepromMichael Davidsaver2-0/+206
Signed-off-by: Michael Davidsaver <mdavidsaver@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-10-15fw_cfg: add write callbackMarc-André Lureau1-4/+10
Reintroduce the write callback that was removed when write support was removed in commit 023e3148567ac898c7258138f8e86c3c2bb40d07. Contrary to the previous callback implementation, the write_cb callback is called whenever a write happened, so handlers must be ready to handle partial write as necessary. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-14/+16
pc, pci, virtio: patches queued before 2.10 A bunch of stuff that was posted before the 2.10 timeframe, mostly fixes/cleanups. New PCI bridges. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 08 Sep 2017 14:15:34 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: fw_cfg: rename read callback pci: add reserved slot check to do_pci_register_device() pci: move check for existing devfn into new pci_bus_devfn_available() helper vmgenid: replace x-write-pointer-available hack vhost-user-bridge: fix resume regression (since 2.9) libvhost-user: support resuming vq->last_avail_idx based on used_idx acpi/vmgenid: change device category to misc intel_iommu: fix missing BQL in pt fast path docs: update documentation considering PCIE-PCI bridge hw/pci: add QEMU-specific PCI capability to the Generic PCI Express Root Port hw/pci: introduce bridge-only vendor-specific capability to provide some hints to firmware hw/pci: introduce pcie-pci-bridge device Revert "ACPI: don't call acpi_pcihp_device_plug_cb on xen" hw/acpi: Move acpi_set_pci_info to pcihp hw/acpi: Limit hotplug to root bus on legacy mode pc: add 2.11 machine types vhost: Release memory references on cleanup Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-08fw_cfg: rename read callbackMarc-André Lureau1-14/+16
The callback is called on select. Furthermore, the next patch introduced a new callback, so rename the function type with a generic name. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/nvram/spapr_nvram: Device can not be created by the usersThomas Huth1-0/+2
Trying to add a spapr-nvram device currently aborts QEMU like this: $ ppc64-softmmu/qemu-system-ppc64 -device spapr-nvram qemu-system-ppc64: hw/ppc/spapr_rtas.c:407: spapr_rtas_register: Assertion `!rtas_table[token].name' failed. Aborted (core dumped) This NVRAM device registers RTAS calls during its realize function and thus can only be used once - and that's internally from spapr.c. So let's mark the device with user_creatable = false to avoid that the users can crash their QEMU this way. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.1 at 2024-11-01 16:54:16 +0000