aboutsummaryrefslogtreecommitdiff
path: root/hw/net
AgeCommit message (Collapse)AuthorFilesLines
2022-05-19ptimer: Rename PTIMER_POLICY_DEFAULT to PTIMER_POLICY_LEGACYPeter Maydell3-3/+3
The traditional ptimer behaviour includes a collection of weird edge case behaviours. In 2016 we improved the ptimer implementation to fix these and generally make the behaviour more flexible, with ptimers opting in to the new behaviour by passing an appropriate set of policy flags to ptimer_init(). For backwards-compatibility, we defined PTIMER_POLICY_DEFAULT (which sets no flags) to give the old weird behaviour. This turns out to be a poor choice of name, because people writing new devices which use ptimers are misled into thinking that the default is probably a sensible choice of flags, when in fact it is almost always not what you want. Rename PTIMER_POLICY_DEFAULT to PTIMER_POLICY_LEGACY and beef up the comment to more clearly say that new devices should not be using it. The code-change part of this commit was produced by sed -i -e 's/PTIMER_POLICY_DEFAULT/PTIMER_POLICY_LEGACY/g' $(git grep -l PTIMER_POLICY_DEFAULT) with the exception of a test name string change in tests/unit/ptimer-test.c which was added manually. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220516103058.162280-1-peter.maydell@linaro.org
2022-05-17tulip: Assign default MAC address if not specifiedHelge Deller1-2/+2
The MAC of the tulip card is stored in the EEPROM and at startup tulip_fill_eeprom() is called to initialize the EEPROM with the MAC address given on the command line, e.g.: -device tulip,mac=00:11:22:33:44:55 In case the mac address was not given on the command line, tulip_fill_eeprom() initializes the MAC in EEPROM with 00:00:00:00:00:00 which breaks e.g. a HP-UX guest. Fix this problem by moving qemu_macaddr_default_if_unset() a few lines up, so that a default mac address is assigned before tulip_fill_eeprom() initializes the EEPROM. Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-05-16virtio-net: don't handle mq request in userspace handler for vhost-vdpaSi-Wei Liu1-0/+13
virtio_queue_host_notifier_read() tends to read pending event left behind on ioeventfd in the vhost_net_stop() path, and attempts to handle outstanding kicks from userspace vq handler. However, in the ctrl_vq handler, virtio_net_handle_mq() has a recursive call into virtio_net_set_status(), which may lead to segmentation fault as shown in below stack trace: 0 0x000055f800df1780 in qdev_get_parent_bus (dev=0x0) at ../hw/core/qdev.c:376 1 0x000055f800c68ad8 in virtio_bus_device_iommu_enabled (vdev=vdev@entry=0x0) at ../hw/virtio/virtio-bus.c:331 2 0x000055f800d70d7f in vhost_memory_unmap (dev=<optimized out>) at ../hw/virtio/vhost.c:318 3 0x000055f800d70d7f in vhost_memory_unmap (dev=<optimized out>, buffer=0x7fc19bec5240, len=2052, is_write=1, access_len=2052) at ../hw/virtio/vhost.c:336 4 0x000055f800d71867 in vhost_virtqueue_stop (dev=dev@entry=0x55f8037ccc30, vdev=vdev@entry=0x55f8044ec590, vq=0x55f8037cceb0, idx=0) at ../hw/virtio/vhost.c:1241 5 0x000055f800d7406c in vhost_dev_stop (hdev=hdev@entry=0x55f8037ccc30, vdev=vdev@entry=0x55f8044ec590) at ../hw/virtio/vhost.c:1839 6 0x000055f800bf00a7 in vhost_net_stop_one (net=0x55f8037ccc30, dev=0x55f8044ec590) at ../hw/net/vhost_net.c:315 7 0x000055f800bf0678 in vhost_net_stop (dev=dev@entry=0x55f8044ec590, ncs=0x55f80452bae0, data_queue_pairs=data_queue_pairs@entry=7, cvq=cvq@entry=1) at ../hw/net/vhost_net.c:423 8 0x000055f800d4e628 in virtio_net_set_status (status=<optimized out>, n=0x55f8044ec590) at ../hw/net/virtio-net.c:296 9 0x000055f800d4e628 in virtio_net_set_status (vdev=vdev@entry=0x55f8044ec590, status=15 '\017') at ../hw/net/virtio-net.c:370 10 0x000055f800d534d8 in virtio_net_handle_ctrl (iov_cnt=<optimized out>, iov=<optimized out>, cmd=0 '\000', n=0x55f8044ec590) at ../hw/net/virtio-net.c:1408 11 0x000055f800d534d8 in virtio_net_handle_ctrl (vdev=0x55f8044ec590, vq=0x7fc1a7e888d0) at ../hw/net/virtio-net.c:1452 12 0x000055f800d69f37 in virtio_queue_host_notifier_read (vq=0x7fc1a7e888d0) at ../hw/virtio/virtio.c:2331 13 0x000055f800d69f37 in virtio_queue_host_notifier_read (n=n@entry=0x7fc1a7e8894c) at ../hw/virtio/virtio.c:3575 14 0x000055f800c688e6 in virtio_bus_cleanup_host_notifier (bus=<optimized out>, n=n@entry=14) at ../hw/virtio/virtio-bus.c:312 15 0x000055f800d73106 in vhost_dev_disable_notifiers (hdev=hdev@entry=0x55f8035b51b0, vdev=vdev@entry=0x55f8044ec590) at ../../../include/hw/virtio/virtio-bus.h:35 16 0x000055f800bf00b2 in vhost_net_stop_one (net=0x55f8035b51b0, dev=0x55f8044ec590) at ../hw/net/vhost_net.c:316 17 0x000055f800bf0678 in vhost_net_stop (dev=dev@entry=0x55f8044ec590, ncs=0x55f80452bae0, data_queue_pairs=data_queue_pairs@entry=7, cvq=cvq@entry=1) at ../hw/net/vhost_net.c:423 18 0x000055f800d4e628 in virtio_net_set_status (status=<optimized out>, n=0x55f8044ec590) at ../hw/net/virtio-net.c:296 19 0x000055f800d4e628 in virtio_net_set_status (vdev=0x55f8044ec590, status=15 '\017') at ../hw/net/virtio-net.c:370 20 0x000055f800d6c4b2 in virtio_set_status (vdev=0x55f8044ec590, val=<optimized out>) at ../hw/virtio/virtio.c:1945 21 0x000055f800d11d9d in vm_state_notify (running=running@entry=false, state=state@entry=RUN_STATE_SHUTDOWN) at ../softmmu/runstate.c:333 22 0x000055f800d04e7a in do_vm_stop (state=state@entry=RUN_STATE_SHUTDOWN, send_stop=send_stop@entry=false) at ../softmmu/cpus.c:262 23 0x000055f800d04e99 in vm_shutdown () at ../softmmu/cpus.c:280 24 0x000055f800d126af in qemu_cleanup () at ../softmmu/runstate.c:812 25 0x000055f800ad5b13 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:51 For now, temporarily disable handling MQ request from the ctrl_vq userspace hanlder to avoid the recursive virtio_net_set_status() call. Some rework is needed to allow changing the number of queues without going through a full virtio_net_set_status cycle, particularly for vhost-vdpa backend. This patch will need to be reverted as soon as future patches of having the change of #queues handled in userspace is merged. Fixes: 402378407db ("vhost-vdpa: multiqueue support") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <1651890498-24478-8-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16vhost-net: fix improper cleanup in vhost_net_startSi-Wei Liu1-1/+3
vhost_net_start() missed a corresponding stop_one() upon error from vhost_set_vring_enable(). While at it, make the error handling for err_start more robust. No real issue was found due to this though. Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <1651890498-24478-5-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpaSi-Wei Liu1-2/+31
With MQ enabled vdpa device and non-MQ supporting guest e.g. booting vdpa with mq=on over OVMF of single vqp, below assert failure is seen: ../hw/virtio/vhost-vdpa.c:560: vhost_vdpa_get_vq_index: Assertion `idx >= dev->vq_index && idx < dev->vq_index + dev->nvqs' failed. 0 0x00007f8ce3ff3387 in raise () at /lib64/libc.so.6 1 0x00007f8ce3ff4a78 in abort () at /lib64/libc.so.6 2 0x00007f8ce3fec1a6 in __assert_fail_base () at /lib64/libc.so.6 3 0x00007f8ce3fec252 in () at /lib64/libc.so.6 4 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:563 5 0x0000558f52d79421 in vhost_vdpa_get_vq_index (dev=<optimized out>, idx=<optimized out>) at ../hw/virtio/vhost-vdpa.c:558 6 0x0000558f52d7329a in vhost_virtqueue_mask (hdev=0x558f55c01800, vdev=0x558f568f91f0, n=2, mask=<optimized out>) at ../hw/virtio/vhost.c:1557 7 0x0000558f52c6b89a in virtio_pci_set_guest_notifier (d=d@entry=0x558f568f0f60, n=n@entry=2, assign=assign@entry=true, with_irqfd=with_irqfd@entry=false) at ../hw/virtio/virtio-pci.c:974 8 0x0000558f52c6c0d8 in virtio_pci_set_guest_notifiers (d=0x558f568f0f60, nvqs=3, assign=true) at ../hw/virtio/virtio-pci.c:1019 9 0x0000558f52bf091d in vhost_net_start (dev=dev@entry=0x558f568f91f0, ncs=0x558f56937cd0, data_queue_pairs=data_queue_pairs@entry=1, cvq=cvq@entry=1) at ../hw/net/vhost_net.c:361 10 0x0000558f52d4e5e7 in virtio_net_set_status (status=<optimized out>, n=0x558f568f91f0) at ../hw/net/virtio-net.c:289 11 0x0000558f52d4e5e7 in virtio_net_set_status (vdev=0x558f568f91f0, status=15 '\017') at ../hw/net/virtio-net.c:370 12 0x0000558f52d6c4b2 in virtio_set_status (vdev=vdev@entry=0x558f568f91f0, val=val@entry=15 '\017') at ../hw/virtio/virtio.c:1945 13 0x0000558f52c69eff in virtio_pci_common_write (opaque=0x558f568f0f60, addr=<optimized out>, val=<optimized out>, size=<optimized out>) at ../hw/virtio/virtio-pci.c:1292 14 0x0000558f52d15d6e in memory_region_write_accessor (mr=0x558f568f19d0, addr=20, value=<optimized out>, size=1, shift=<optimized out>, mask=<optimized out>, attrs=...) at ../softmmu/memory.c:492 15 0x0000558f52d127de in access_with_adjusted_size (addr=addr@entry=20, value=value@entry=0x7f8cdbffe748, size=size@entry=1, access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=0x558f52d15cf0 <memory_region_write_accessor>, mr=0x558f568f19d0, attrs=...) at ../softmmu/memory.c:554 16 0x0000558f52d157ef in memory_region_dispatch_write (mr=mr@entry=0x558f568f19d0, addr=20, data=<optimized out>, op=<optimized out>, attrs=attrs@entry=...) at ../softmmu/memory.c:1504 17 0x0000558f52d078e7 in flatview_write_continue (fv=fv@entry=0x7f8accbc3b90, addr=addr@entry=103079215124, attrs=..., ptr=ptr@entry=0x7f8ce6300028, len=len@entry=1, addr1=<optimized out>, l=<optimized out>, mr=0x558f568f19d0) at /home/opc/qemu-upstream/include/qemu/host-utils.h:165 18 0x0000558f52d07b06 in flatview_write (fv=0x7f8accbc3b90, addr=103079215124, attrs=..., buf=0x7f8ce6300028, len=1) at ../softmmu/physmem.c:2822 19 0x0000558f52d0b36b in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>) at ../softmmu/physmem.c:2914 20 0x0000558f52d0b3da in address_space_rw (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=..., buf=buf@entry=0x7f8ce6300028, len=<optimized out>, is_write=<optimized out>) at ../softmmu/physmem.c:2924 21 0x0000558f52dced09 in kvm_cpu_exec (cpu=cpu@entry=0x558f55c2da60) at ../accel/kvm/kvm-all.c:2903 22 0x0000558f52dcfabd in kvm_vcpu_thread_fn (arg=arg@entry=0x558f55c2da60) at ../accel/kvm/kvm-accel-ops.c:49 23 0x0000558f52f9f04a in qemu_thread_start (args=<optimized out>) at ../util/qemu-thread-posix.c:556 24 0x00007f8ce4392ea5 in start_thread () at /lib64/libpthread.so.0 25 0x00007f8ce40bb9fd in clone () at /lib64/libc.so.6 The cause for the assert failure is due to that the vhost_dev index for the ctrl vq was not aligned with actual one in use by the guest. Upon multiqueue feature negotiation in virtio_net_set_multiqueue(), if guest doesn't support multiqueue, the guest vq layout would shrink to a single queue pair, consisting of 3 vqs in total (rx, tx and ctrl). This results in ctrl_vq taking a different vhost_dev group index than the default. We can map vq to the correct vhost_dev group by checking if MQ is supported by guest and successfully negotiated. Since the MQ feature is only present along with CTRL_VQ, we ensure the index 2 is only meant for the control vq while MQ is not supported by guest. Fixes: 22288fe ("virtio-net: vhost control virtqueue support") Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <1651890498-24478-3-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16virtio-net: setup vhost_dev and notifiers for cvq only when feature is ↵Si-Wei Liu1-1/+2
negotiated When the control virtqueue feature is absent or not negotiated, vhost_net_start() still tries to set up vhost_dev and install vhost notifiers for the control virtqueue, which results in erroneous ioctl calls with incorrect queue index sending down to driver. Do that only when needed. Fixes: 22288fe ("virtio-net: vhost control virtqueue support") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <1651890498-24478-2-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16virtio: add vhost support for virtio devicesJonah Palmer1-0/+9
This patch adds a get_vhost() callback function for VirtIODevices that returns the device's corresponding vhost_dev structure, if the vhost device is running. This patch also adds a vhost_started flag for VirtIODevices. Previously, a VirtIODevice wouldn't be able to tell if its corresponding vhost device was active or not. Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com> Message-Id: <1648819405-25696-3-git-send-email-jonah.palmer@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16virtio: drop name parameter for virtio_init()Jonah Palmer1-1/+1
This patch drops the name parameter for the virtio_init function. The pair between the numeric device ID and the string device ID (name) of a virtio device already exists, but not in a way that lets us map between them. This patch lets us do this and removes the need for the name parameter in the virtio_init function. Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com> Message-Id: <1648819405-25696-2-git-send-email-jonah.palmer@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16vhost_net: Print feature masks in hexIlya Maximets1-2/+2
"0x200000000" is much more readable than "8589934592". The change saves one step (conversion) while debugging. Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Message-Id: <20220318140440.596019-1-i.maximets@ovn.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-05-13hw/virtio: Replace g_memdup() by g_memdup2()Philippe Mathieu-Daudé1-1/+2
Per https://discourse.gnome.org/t/port-your-module-from-g-memdup-to-g-memdup2-now/5538 The old API took the size of the memory to duplicate as a guint, whereas most memory functions take memory sizes as a gsize. This made it easy to accidentally pass a gsize to g_memdup(). For large values, that would lead to a silent truncation of the size from 64 to 32 bits, and result in a heap area being returned which is significantly smaller than what the caller expects. This can likely be exploited in various modules to cause a heap buffer overflow. Replace g_memdup() by the safer g_memdup2() wrapper. Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20220512175747.142058-6-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-11Clean up header guards that don't match their file nameMarkus Armbruster2-4/+4
Header guard symbols should match their file name to make guard collisions less likely. Cleaned up with scripts/clean-header-guards.pl, followed by some renaming of new guard symbols picked by the script to better ones. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20220506134911.2856099-2-armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [Change to generated file ebpf/rss.bpf.skeleton.h backed out]
2022-05-07meson: use have_vhost_* variables to pick sourcesPaolo Bonzini1-2/+6
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-20util/log: Remove qemu_log_flushRichard Henderson1-1/+0
All uses flush output immediately before or after qemu_log_unlock. Instead of a separate call, move the flush into qemu_log_unlock. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220417183019.755276-20-richard.henderson@linaro.org>
2022-04-20*: Use fprintf between qemu_log_trylock/unlockRichard Henderson1-13/+15
Inside qemu_log, we perform qemu_log_trylock/unlock, which need not be done if we have already performed the lock beforehand. Always check the result of qemu_log_trylock -- only checking qemu_loglevel_mask races with the acquisition of the lock on the logfile. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220417183019.755276-10-richard.henderson@linaro.org>
2022-04-20util/log: Rename qemu_log_lock to qemu_log_trylockRichard Henderson1-1/+1
This function can fail, which makes it more like ftrylockfile or pthread_mutex_trylock than flockfile or pthread_mutex_lock, so rename it. To closer match the other trylock functions, release rcu_read_lock along the failure path, so that qemu_log_unlock need not be called on failure. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau4-4/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06Replace config-time define HOST_WORDS_BIGENDIANMarc-André Lureau2-3/+3
Replace a config-time define with a compile time condition define (compatible with clang and gcc) that must be declared prior to its usage. This avoids having a global configure time define, but also prevents from bad usage, if the config header wasn't included before. This can help to make some code independent from qemu too. gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> [ For the s390x parts I'm involved in ] Acked-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-22Replace GCC_FMT_ATTR with G_GNUC_PRINTFMarc-André Lureau2-2/+2
One less qemu-specific macro. It also helps to make some headers/units only depend on glib, and thus moved in standalone projects eventually. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
2022-03-21Use g_new() & friends where that makes obvious senseMarkus Armbruster1-2/+2
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. This commit only touches allocations with size arguments of the form sizeof(T). Patch created mechanically with: $ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \ --macro-file scripts/cocci-macro-file.h FILES... Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20220315144156.1595462-4-armbru@redhat.com> Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
2022-03-15virtio-net: fix map leaking on error during receiveJason Wang1-0/+1
Commit bedd7e93d0196 ("virtio-net: fix use after unmap/free for sg") tries to fix the use after free of the sg by caching the virtqueue elements in an array and unmap them at once after receiving the packets, But it forgot to unmap the cached elements on error which will lead to leaking of mapping and other unexpected results. Fixing this by detaching the cached elements on error. This addresses CVE-2022-26353. Reported-by: Victor Tom <vv474172261@gmail.com> Cc: qemu-stable@nongnu.org Fixes: CVE-2022-26353 Fixes: bedd7e93d0196 ("virtio-net: fix use after unmap/free for sg") Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-03-09Merge remote-tracking branch 'remotes/philmd/tags/mips-20220308' into stagingPeter Maydell1-1/+1
MIPS patches queue - Fix CP0 cycle counter timing - Fix VMState of gt64120 IRQs - Long due PIIX4 QOM cleanups - ISA IRQ QOM'ification / cleanups # gpg: Signature made Tue 08 Mar 2022 18:39:42 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd/tags/mips-20220308: tests/avocado/linux_ssh_mips_malta.py: add missing accel (tcg) tag hw/isa: Inline and remove one-line isa_init_irq() hw/isa: Drop unused attributes from ISADevice hw/isa/isa-bus: Remove isabus_dev_print() hw/input/pckbd: QOM'ify IRQ numbers hw/rtc/m48t59-isa: QOM'ify IRQ number hw/rtc/mc146818rtc: QOM'ify IRQ number hw/mips/gt64xxx_pci: Resolve gt64120_register() hw/isa/piix4: Replace some magic IRQ constants hw/isa/piix4: Resolve global instance variable hw/isa/piix4: Pass PIIX4State as opaque parameter for piix4_set_irq() hw/isa/piix4: Resolve redundant i8259[] attribute malta: Move PCI interrupt handling from gt64xxx_pci to piix4 hw/mips/gt64xxx_pci: Fix PCI IRQ levels to be preserved during migration target/mips: Remove duplicated MIPSCPU::cp0_count_rate target/mips: Fix cycle counter timing calculations Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-08hw/isa: Inline and remove one-line isa_init_irq()Bernhard Beschow1-1/+1
isa_init_irq() has become a trivial one-line wrapper for isa_get_irq(). It can therefore be removed. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> (tpm_tis_isa) Acked-by: Corey Minyard <cminyard@mvista.com> (isa_ipmi_bt, isa_ipmi_kcs) Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220301220037.76555-8-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220307134353.1950-14-philippe.mathieu.daude@gmail.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com>
2022-03-06virtio-net: Unlimit tx queue size if peer is vdpaEugenio Pérez1-5/+8
The code used to limit the maximum size of tx queue for others backends than vhost_user since the introduction of configurable tx queue size in 9b02e1618cf2 ("virtio-net: enable configurable tx queue size"). As vhost_user, vhost_vdpa devices should deal with memory region crosses already, so let's use the full tx size. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20220217175029.2517071-1-eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-02-21Mark remaining global TypeInfo instances as constBernhard Beschow1-1/+1
More than 1k of TypeInfo instances are already marked as const. Mark the remaining ones, too. This commit was created with: git grep -z -l 'static TypeInfo' -- '*.c' | \ xargs -0 sed -i 's/static TypeInfo/static const TypeInfo/' Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Corey Minyard <cminyard@mvista.com> Message-id: 20220117145805.173070-2-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-14hw/net: e1000e: Clear ICR on read when using non MSI-X interruptsNick Hudson2-0/+6
In section 7.4.3 of the 82574 datasheet it states that "In systems that do not support MSI-X, reading the ICR register clears it's bits..." Some OSes rely on this. Signed-off-by: Nick Hudson <skrll@netbsd.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-02-14hw/net/vmxnet3: Log guest-triggerable errors using LOG_GUEST_ERRORPhilippe Mathieu-Daudé1-1/+3
The "Interrupt Cause" register (VMXNET3_REG_ICR) is read-only. Write accesses are ignored. Log them with as LOG_GUEST_ERROR instead of aborting: [R +0.239743] writeq 0xe0002031 0x46291a5a55460800 ERROR:hw/net/vmxnet3.c:1819:vmxnet3_io_bar1_write: code should not be reached Thread 1 "qemu-system-i38" received signal SIGABRT, Aborted. (gdb) bt #3 0x74c397d3 in __GI_abort () at abort.c:79 #4 0x76d3cd4c in g_assertion_message (domain=<optimized out>, file=<optimized out>, line=<optimized out>, func=<optimized out>, message=<optimized out>) at ../glib/gtestutils.c:3223 #5 0x76d9d45f in g_assertion_message_expr (domain=0x0, file=0x59fc2e53 "hw/net/vmxnet3.c", line=1819, func=0x59fc11e0 <__func__.vmxnet3_io_bar1_write> "vmxnet3_io_bar1_write", expr=<optimized out>) at ../glib/gtestutils.c:3249 #6 0x57e80a3a in vmxnet3_io_bar1_write (opaque=0x62814100, addr=56, val=70, size=4) at hw/net/vmxnet3.c:1819 #7 0x58c2d894 in memory_region_write_accessor (mr=0x62816b90, addr=56, value=0x7fff9450, size=4, shift=0, mask=4294967295, attrs=...) at softmmu/memory.c:492 #8 0x58c2d1d2 in access_with_adjusted_size (addr=56, value=0x7fff9450, size=1, access_size_min=4, access_size_max=4, access_fn= 0x58c2d290 <memory_region_write_accessor>, mr=0x62816b90, attrs=...) at softmmu/memory.c:554 #9 0x58c2bae7 in memory_region_dispatch_write (mr=0x62816b90, addr=56, data=70, op=MO_8, attrs=...) at softmmu/memory.c:1504 #10 0x58bfd034 in flatview_write_continue (fv=0x606000181700, addr=0xe0002038, attrs=..., ptr=0x7fffb9e0, len=1, addr1=56, l=1, mr=0x62816b90) at softmmu/physmem.c:2782 #11 0x58beba00 in flatview_write (fv=0x606000181700, addr=0xe0002031, attrs=..., buf=0x7fffb9e0, len=8) at softmmu/physmem.c:2822 #12 0x58beb589 in address_space_write (as=0x608000015f20, addr=0xe0002031, attrs=..., buf=0x7fffb9e0, len=8) at softmmu/physmem.c:2914 Reported-by: Dike <dike199774@qq.com> Reported-by: Duhao <504224090@qq.com> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2032932 Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-01-28Remove unnecessary minimum_version_id_old fieldsPeter Maydell6-8/+0
The migration code will not look at a VMStateDescription's minimum_version_id_old field unless that VMSD has set the load_state_old field to something non-NULL. (The purpose of minimum_version_id_old is to specify what migration version is needed for the code in the function pointed to by load_state_old to be able to handle it on incoming migration.) We have exactly one VMSD which still has a load_state_old, in the PPC CPU; every other VMSD which sets minimum_version_id_old is doing so unnecessarily. Delete all the unnecessary ones. Commit created with: sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old') with the one legitimate use then hand-edited back in. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> --- It missed vmstate_ppc_cpu.
2022-01-20hw/net: Move MV88W8618 network device out of hw/arm/ directoryPhilippe Mathieu-Daudé2-0/+404
The Marvell 88W8618 network device is hidden in the Musicpal machine. Move it into a new unit file under the hw/net/ directory. Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220107184429.423572-4-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-10Revert "virtio: introduce macro IRTIO_CONFIG_IRQ_IDX"Michael S. Tsirkin1-8/+2
This reverts commit bf1d85c166c19af95dbd27b1faba1d2909732323. Fixes: bf1d85c166 ("virtio: introduce macro IRTIO_CONFIG_IRQ_IDX") Cc: "Cindy Lu" <lulu@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-10Revert "virtio-net: add support for configure interrupt"Michael S. Tsirkin3-20/+2
This reverts commit 497679d51087090d5a22fd265d1b96cf92d49d9d. Fixes: 497679d510 ("virtio-net: add support for configure interrupt") Cc: "Cindy Lu" <lulu@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-07virtio-net: add support for configure interruptCindy Lu3-2/+20
Add functions to support configure interrupt in virtio_net The functions are config_pending and config_mask, while this input idx is VIRTIO_CONFIG_IRQ_IDX will check the function of configure interrupt. Signed-off-by: Cindy Lu <lulu@redhat.com> Message-Id: <20211104164827.21911-9-lulu@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-06virtio: introduce macro IRTIO_CONFIG_IRQ_IDXCindy Lu1-2/+8
To support configure interrupt for vhost-vdpa Introduce VIRTIO_CONFIG_IRQ_IDX -1 as configure interrupt's queue index, Then we can reuse the functions guest_notifier_mask and guest_notifier_pending. Add the check of queue index in these drivers, if the driver does not support configure interrupt, the function will just return Signed-off-by: Cindy Lu <lulu@redhat.com> Message-Id: <20211104164827.21911-2-lulu@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-12-31pci: Let ld*_pci_dma() propagate MemTxResultPhilippe Mathieu-Daudé2-23/+18
ld*_dma() returns a MemTxResult type. Do not discard it, return it to the caller. Update the few callers. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211223115554.3155328-24-philmd@redhat.com>
2021-12-31pci: Let ld*_pci_dma() take MemTxAttrs argumentPhilippe Mathieu-Daudé2-14/+23
Let devices specify transaction attributes when calling ld*_pci_dma(). Keep the default MEMTXATTRS_UNSPECIFIED in the few callers. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211223115554.3155328-22-philmd@redhat.com>
2021-12-31pci: Let st*_pci_dma() take MemTxAttrs argumentPhilippe Mathieu-Daudé2-19/+28
Let devices specify transaction attributes when calling st*_pci_dma(). Keep the default MEMTXATTRS_UNSPECIFIED in the few callers. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211223115554.3155328-21-philmd@redhat.com>
2021-12-30dma: Let dma_memory_read/write() take MemTxAttrs argumentPhilippe Mathieu-Daudé4-35/+60
Let devices specify transaction attributes when calling dma_memory_read() or dma_memory_write(). Patch created mechanically using spatch with this script: @@ expression E1, E2, E3, E4; @@ ( - dma_memory_read(E1, E2, E3, E4) + dma_memory_read(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED) | - dma_memory_write(E1, E2, E3, E4) + dma_memory_write(E1, E2, E3, E4, MEMTXATTRS_UNSPECIFIED) ) Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20211223115554.3155328-6-philmd@redhat.com>
2021-12-22failover: Silence warning messages during qtestLaurent Vivier1-1/+6
virtio-net-failover test tries several device combinations that produces some expected warnings. These warning can be confusing, so we disable them during the qtest sequence. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20211220145314.390697-1-lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> [thuth: Fix memory leak by using error_free()] Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-12-15hw/net: npcm7xx_emc fix missing queue_flushPatrick Venture1-10/+8
The rx_active boolean change to true should always trigger a try_read call that flushes the queue. Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211203221002.1719306-1-venture@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-11-19net: vmxnet3: validate configuration values during activate (CVE-2021-20203)Prasad J Pandit1-0/+13
While activating device in vmxnet3_acticate_device(), it does not validate guest supplied configuration values against predefined minimum - maximum limits. This may lead to integer overflow or OOB access issues. Add checks to avoid it. Fixes: CVE-2021-20203 Buglink: https://bugs.launchpad.net/qemu/+bug/1913873 Reported-by: Gaoning Pan <pgn@zju.edu.cn> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-11-11vhost: Fix last vq queue index of devices with no cvqEugenio Pérez1-4/+4
The -1 assumes that cvq device model is accounted in data_queue_pairs, if cvq does not exists, but it's actually the opposite: Devices with !cvq are ok but devices with cvq does not add the last queue to data_queue_pairs. This is not a problem to vhost-net, but it is to vhost-vdpa: * Devices with cvq gets initialized at last data vq device model, not at cvq one. * Devices with !cvq never gets initialized, since last_index is the first queue of the last device model. Because of that, the right change in last_index is to actually add the cvq, not to remove the missing one. This is not a problem to vhost-net, but it is to vhost-vdpa, which device model trust to reach the last index to finish starting the device. Also, as the previous commit, rename it to index_end. Tested with vp_vdpa with host's vhost=on and vhost=off, with ctrl_vq=on and ctrl_vq=off. Fixes: 049eb15b5fc9 ("vhost: record the last virtqueue index for the virtio device") Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20211104085625.2054959-3-eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-11vhost: Rename last_index to vq_index_endEugenio Pérez1-2/+2
The doc of this field pointed out that last_index is the last vq index. This is misleading, since it's actually one past the end of the vqs. Renaming and modifying comment. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20211104085625.2054959-2-eperezma@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-05e1000: fix tx re-entrancy problemJon Maloy1-0/+7
The fact that the MMIO handler is not re-entrant causes an infinite loop under certain conditions: Guest write to TDT -> Loopback -> RX (DMA to TDT) -> TX We now eliminate the effect of this problem locally in e1000, by adding a boolean in struct E1000State indicating when the TX side is busy. This will cause any entering new call to return early instead of interfering with the ongoing work, and eliminates any risk of looping. This is intended to address CVE-2021-20257. Signed-off-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-10-20virtio-net: vhost control virtqueue supportJason Wang2-5/+20
This patch implements the control virtqueue support for vhost. This requires virtio-net to figure out the datapath queue pairs and control virtqueue via is_datapath and pass the number of those two types of virtqueues to vhost_net_start()/vhost_net_stop(). Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20211020045600.16082-10-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-20vhost: record the last virtqueue index for the virtio deviceJason Wang1-3/+9
This patch introduces a new field in the vhost_dev structure to record the last virtqueue index for the virtio device. This will be useful for the vhost backends with 1:N model to start or stop the device after all the vhost_dev structures were started or stopped. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20211020045600.16082-9-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-20virtio-net: use "queue_pairs" instead of "queues" when possibleJason Wang2-78/+78
Most of the time, "queues" really means queue pairs. So this patch switch to use "queue_pairs" to avoid confusion. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20211020045600.16082-8-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-20vhost-net: control virtqueue supportJason Wang3-15/+36
We assume there's no cvq in the past, this is not true when we need control virtqueue support for vhost-user backends. So this patch implements the control virtqueue support for vhost-net. As datapath, the control virtqueue is also required to be coupled with the NetClientState. The vhost_net_start/stop() are tweaked to accept the number of datapath queue pairs plus the the number of control virtqueue for us to start and stop the vhost device. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20211020045600.16082-7-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-20qdev/qbus: remove failover specific codeLaurent Vivier1-1/+11
Commit f3a850565693 ("qdev/qbus: add hidden device support") has introduced a generic way to hide a device but it has modified qdev_device_add() to check a specific option of the failover device, "failover_pair_id", before calling the generic mechanism. It's not needed (and not generic) to do that in qdev_device_add() because this is also checked by the failover_hide_primary_device() function that uses the generic mechanism to hide the device. Cc: Jens Freimann <jfreimann@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20211019071532.682717-3-lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2021-10-20failover: fix a regression introduced by JSON'ification of -deviceLaurent Vivier1-6/+18
The hide_device helper can be called several times for the same devices as it shouldn't change any state and should only return an information. But not to rely anymore on QemuOpts we have introduced a new field to store the parameters of the device and don't allow to update it once it is done. And as the function is called several times, we ends with: warning: Cannot attach more than one primary device to 'virtio0' That is not only a warning as it prevents to hide the device and breaks failover. Fix that by checking the device id. Now, we fail only if the virtio-net device is really used by two different devices, for instance: -device virtio-net-pci,id=virtio0,failover=on,... \ -device vfio-pci,id=hostdev0,failover_pair_id=virtio0,... \ -device e1000e,id=e1000e0,failover_pair_id=virtio0,... \ will exit with: Cannot attach more than one primary device to 'virtio0': 'hostdev0' and 'e1000e0' Fixes: 259a10dbcb4f ("virtio-net: Store failover primary opts pointer locally") Cc: kwolf@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20211019071532.682717-2-lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2021-10-15qdev: Base object creation on QDict rather than QemuOptsKevin Wolf1-10/+13
QDicts are both what QMP natively uses and what the keyval parser produces. Going through QemuOpts isn't useful for either one, so switch the main device creation function to QDicts. By sharing more code with the -object/object-add code path, we can even reduce the code size a bit. This commit doesn't remove the detour through QemuOpts from any code path yet, but it allows the following commits to do so. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20211008133442.141332-15-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-10-15virtio-net: Avoid QemuOpts in failover_find_primary_device()Kevin Wolf1-33/+19
Don't go through the global QemuOptsList, it is state of the legacy command line parser and we will create devices that are not contained in it. It is also just the command line configuration and not necessarily the current runtime state. Instead, look at the qdev device tree which has the current state of all existing devices. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20211008133442.141332-14-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.1 at 2024-09-28 23:40:10 +0000