aboutsummaryrefslogtreecommitdiff
path: root/hw/net
AgeCommit message (Collapse)AuthorFilesLines
2023-05-23rtl8139: fix large_send_mss divide-by-zeroStefan Hajnoczi1-0/+3
If the driver sets large_send_mss to 0 then a divide-by-zero occurs. Even if the division wasn't a problem, the for loop that emits MSS-sized packets would never terminate. Solve these issues by skipping offloading when large_send_mss=0. This issue was found by OSS-Fuzz as part of Alexander Bulekov's device fuzzing work. The reproducer is: $ cat << EOF | ./qemu-system-i386 -display none -machine accel=qtest, -m \ 512M,slots=1,maxmem=0xffff000000000000 -machine q35 -nodefaults -device \ rtl8139,netdev=net0 -netdev user,id=net0 -device \ pc-dimm,id=nv1,memdev=mem1,addr=0xb800a64602800000 -object \ memory-backend-ram,id=mem1,size=2M -qtest stdio outl 0xcf8 0x80000814 outl 0xcfc 0xe0000000 outl 0xcf8 0x80000804 outw 0xcfc 0x06 write 0xe0000037 0x1 0x04 write 0xe00000e0 0x2 0x01 write 0x1 0x1 0x04 write 0x3 0x1 0x98 write 0xa 0x1 0x8c write 0xb 0x1 0x02 write 0xc 0x1 0x46 write 0xd 0x1 0xa6 write 0xf 0x1 0xb8 write 0xb800a646028c000c 0x1 0x08 write 0xb800a646028c000e 0x1 0x47 write 0xb800a646028c0010 0x1 0x02 write 0xb800a646028c0017 0x1 0x06 write 0xb800a646028c0036 0x1 0x80 write 0xe00000d9 0x1 0x40 EOF Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1582 Closes: https://gitlab.com/qemu-project/qemu/-/issues/1582 Cc: qemu-stable@nongnu.org Cc: Peter Maydell <peter.maydell@linaro.org> Fixes: 6d71357a3b65 ("rtl8139: honor large send MSS value") Reported-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23vmxnet3: Do not depend on PCAkihiko Odaki1-1/+1
vmxnet3 has no dependency on PC, and VMware Fusion actually makes it available on Apple Silicon according to: https://kb.vmware.com/s/article/90364 Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Clear-on-read ICR when ICR.INTA is setAkihiko Odaki1-0/+2
For GPIE.NSICR, Section 7.3.2.1.2 says: > ICR bits are cleared on register read. If GPIE.NSICR = 0b, then the > clear on read occurs only if no bit is set in the IMS or at least one > bit is set in the IMS and there is a true interrupt as reflected in > ICR.INTA. e1000e does similar though it checks for CTRL_EXT.IAME, which does not exist on igb. Suggested-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Notify only new interruptsAkihiko Odaki2-126/+86
This follows the corresponding change for e1000e. This fixes: tests/avocado/netdev-ethtool.py:NetDevEthtool.test_igb Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23e1000e: Notify only new interruptsAkihiko Odaki3-88/+69
In MSI-X mode, if there are interrupts already notified but not cleared and a new interrupt arrives, e1000e incorrectly notifies the notified ones again along with the new one. To fix this issue, replace e1000e_update_interrupt_state() with two new functions: e1000e_raise_interrupts() and e1000e_lower_interrupts(). These functions don't only raise or lower interrupts, but it also performs register writes which updates the interrupt state. Before it performs a register write, these function determines the interrupts already raised, and compares with the interrupts raised after the register write to determine the interrupts to notify. The introduction of these functions made tracepoints which assumes that the caller of e1000e_update_interrupt_state() performs register writes obsolete. These tracepoints are now removed, and alternative ones are added to the new functions. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Implement Tx timestampAkihiko Odaki2-0/+10
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Implement Rx PTP2 timestampAkihiko Odaki3-41/+127
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Implement igb-specific oversize checkAkihiko Odaki1-15/+21
igb has a configurable size limit for LPE, and uses different limits depending on whether the packet is treated as a VLAN packet. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Filter with the second VLAN tag for extended VLANAkihiko Odaki1-5/+18
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Strip the second VLAN tag for extended VLANAkihiko Odaki4-21/+30
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Implement Tx SCTP CSOAkihiko Odaki3-5/+33
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Implement Rx SCTP CSOAkihiko Odaki4-12/+73
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Use UDP for RSS hashAkihiko Odaki2-0/+19
e1000e does not support using UDP for RSS hash, but igb does. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Implement MSI-X single vector modeAkihiko Odaki1-2/+7
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23hw/net/net_rx_pkt: Enforce alignment for eth_headerAkihiko Odaki1-4/+7
eth_strip_vlan and eth_strip_vlan_ex refers to ehdr_buf as struct eth_header. Enforce alignment for the structure. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23net/eth: Always add VLAN tagAkihiko Odaki1-9/+7
It is possible to have another VLAN tag even if the packet is already tagged. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Rename a variable in igb_receive_internal()Akihiko Odaki1-6/+6
Rename variable "n" to "causes", which properly represents the content of the variable. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23e1000e: Rename a variable in e1000e_receive_internal()Akihiko Odaki1-9/+9
Rename variable "n" to "causes", which properly represents the content of the variable. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Clear EICR bits for delayed MSI-X interruptsAkihiko Odaki1-9/+12
Section 7.3.4.1 says: > When auto-clear is enabled for an interrupt cause, the EICR bit is > set when a cause event mapped to this vector occurs. When the EITR > Counter reaches zero, the MSI-X message is sent on PCIe. Then the > EICR bit is cleared and enabled to be set by a new cause event Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Fix igb_mac_reg_init coding style alignmentAkihiko Odaki1-48/+48
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Share common VF constantsAkihiko Odaki3-12/+13
The constants need to be consistent between the PF and VF. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Add more definitions for Tx descriptorAkihiko Odaki2-7/+29
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23vmxnet3: Reset packet state after emptying Tx queueAkihiko Odaki1-1/+2
Keeping Tx packet state after the transmit queue is emptied but this behavior is unreliable as the state can be reset anytime the migration happens. Always reset Tx packet state always after the queue is emptied. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23e1000e: Reset packet state after emptying Tx queueAkihiko Odaki1-4/+2
Keeping Tx packet state after the transmit queue is emptied has some problems: - The datasheet says the descriptors can be reused after the transmit queue is emptied, but the Tx packet state may keep references to them. - The Tx packet state cannot be migrated so it can be reset anytime the migration happens. Always reset Tx packet state always after the queue is emptied. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Read DCMD.VLE of the first Tx descriptorAkihiko Odaki1-1/+1
Section 7.2.2.3 Advanced Transmit Data Descriptor says: > For frames that spans multiple descriptors, all fields apart from > DCMD.EOP, DCMD.RS, DCMD.DEXT, DTALEN, Address and DTYP are valid only > in the first descriptors and are ignored in the subsequent ones. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Remove gotoAkihiko Odaki1-1/+1
The goto is a bit confusing as it changes the control flow only if L4 protocol is not recognized. It is also different from e1000e, and noisy when comparing e1000e and igb. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Always log status after building rx metadataAkihiko Odaki1-2/+1
Without this change, the status flags may not be traced e.g. if checksum offloading is disabled. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23e1000e: Always log status after building rx metadataAkihiko Odaki1-2/+1
Without this change, the status flags may not be traced e.g. if checksum offloading is disabled. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23e1000x: Rename TcpIpv6 into TcpIpv6ExAkihiko Odaki4-21/+21
e1000e and igb employs NetPktRssIpV6TcpEx for RSS hash if TcpIpv6 MRQC bit is set. Moreover, igb also has a MRQC bit for NetPktRssIpV6Tcp though it is not implemented yet. Rename it to TcpIpv6Ex to avoid confusion. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23e1000x: Take CRC into consideration for size checkAkihiko Odaki1-5/+5
Section 13.7.15 Receive Length Error Count says: > Packets over 1522 bytes are oversized if LongPacketEnable is 0b > (RCTL.LPE). If LongPacketEnable (LPE) is 1b, then an incoming packet > is considered oversized if it exceeds 16384 bytes. > These lengths are based on bytes in the received packet from > <Destination Address> through <CRC>, inclusively. As QEMU processes packets without CRC, the number of bytes for CRC need to be subtracted. This change adds some size definitions to be used to derive the new size thresholds to eth.h. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23e1000x: Share more Rx filtering logicAkihiko Odaki6-119/+56
This saves some code and enables tracepoint for e1000's VLAN filtering. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23net/eth: Rename eth_setup_vlan_headers_exAkihiko Odaki1-1/+1
The old eth_setup_vlan_headers has no user so remove it and rename eth_setup_vlan_headers_ex. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23hw/net/net_tx_pkt: Remove net_rx_pkt_get_l4_infoAkihiko Odaki2-14/+0
This function is not used. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Always copy ethernet headerAkihiko Odaki1-20/+23
igb_receive_internal() used to check the iov length to determine copy the iovs to a contiguous buffer, but the check is flawed in two ways: - It does not ensure that iovcnt > 0. - It does not take virtio-net header into consideration. The size of this copy is just 22 octets, which can be even less than the code size required for checks. This (wrong) optimization is probably not worth so just remove it. Removing this also allows igb to assume aligned accesses for the ethernet header. Fixes: 3a977deebe ("Intrdocue igb device emulation") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23e1000e: Always copy ethernet headerAkihiko Odaki1-16/+10
e1000e_receive_internal() used to check the iov length to determine copy the iovs to a contiguous buffer, but the check is flawed in two ways: - It does not ensure that iovcnt > 0. - It does not take virtio-net header into consideration. The size of this copy is just 18 octets, which can be even less than the code size required for checks. This (wrong) optimization is probably not worth so just remove it. Fixes: 6f3fbe4ed0 ("net: Introduce e1000e device emulation") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23net/net_rx_pkt: Use iovec for net_rx_pkt_set_protocols()Akihiko Odaki5-17/+23
igb does not properly ensure the buffer passed to net_rx_pkt_set_protocols() is contiguous for the entire L2/L3/L4 header. Allow it to pass scattered data to net_rx_pkt_set_protocols(). Fixes: 3a977deebe ("Intrdocue igb device emulation") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Clear IMS bits when committing ICR accessAkihiko Odaki1-4/+4
The datasheet says contradicting statements regarding ICR accesses so it is not reliable to determine the behavior of ICR accesses. However, e1000e does clear IMS bits when reading ICR accesses and Linux also expects ICR accesses will clear IMS bits according to: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/ethernet/intel/igb/igb_main.c?h=v6.2#n8048 Fixes: 3a977deebe ("Intrdocue igb device emulation") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Do not require CTRL.VME for tx VLAN taggingAkihiko Odaki1-1/+1
While the datasheet of e1000e says it checks CTRL.VME for tx VLAN tagging, igb's datasheet has no such statements. It also says for "CTRL.VLE": > This register only affects the VLAN Strip in Rx it does not have any > influence in the Tx path in the 82576. (Appendix A. Changes from the 82575) There is no "CTRL.VLE" so it is more likely that it is a mistake of CTRL.VME. Fixes: fba7c3b788 ("igb: respect VMVIR and VMOLR for VLAN") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23igb: Fix Rx packet type encodingAkihiko Odaki2-19/+24
igb's advanced descriptor uses a packet type encoding different from one used in e1000e's extended descriptor. Fix the logic to encode Rx packet type accordingly. Fixes: 3a977deebe ("Intrdocue igb device emulation") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23e1000x: Fix BPRC and MPRCAkihiko Odaki5-45/+33
Before this change, e1000 and the common code updated BPRC and MPRC depending on the matched filter, but e1000e and igb decided to update those counters by deriving the packet type independently. This inconsistency caused a multicast packet to be counted twice. Updating BPRC and MPRC depending on are fundamentally flawed anyway as a filter can be used for different types of packets. For example, it is possible to filter broadcast packets with MTA. Always determine what counters to update by inspecting the packets. Fixes: 3b27430177 ("e1000: Implementing various counters") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23hw/net/net_tx_pkt: Decouple interface from PCIAkihiko Odaki5-53/+54
This allows to use the network packet abstractions even if PCI is not used. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23hw/net/net_tx_pkt: Decouple implementation from PCIAkihiko Odaki2-20/+42
This is intended to be followed by another change for the interface. It also fixes the leak of memory mapping when the specified memory is partially mapped. Fixes: e263cd49c7 ("Packet abstraction for VMWARE network devices") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-23e1000e: Fix tx/rx counterstimothee.cocault@gmail.com4-12/+8
The bytes and packets counter registers are cleared on read. Copying the "total counter" registers to the "good counter" registers has side effects. If the "total" register is never read by the OS, it only gets incremented. This leads to exponential growth of the "good" register. This commit increments the counters individually to avoid this. Signed-off-by: Timothée Cocault <timothee.cocault@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-05-19virtio-net: not enable vq reset feature unconditionallyEugenio Pérez1-1/+0
The commit 93a97dc5200a ("virtio-net: enable vq reset feature") enables unconditionally vq reset feature as long as the device is emulated. This makes impossible to actually disable the feature, and it causes migration problems from qemu version previous than 7.2. The entire final commit is unneeded as device system already enable or disable the feature properly. This reverts commit 93a97dc5200a95e63b99cb625f20b7ae802ba413. Fixes: 93a97dc5200a ("virtio-net: enable vq reset feature") Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230504101447.389398-1-eperezma@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-16hw/net: Move xilinx_ethlite.c to the target-independent source setThomas Huth2-2/+2
Now that the tswap() functions are available for target-independent code, too, we can move xilinx_ethlite.c from specific_ss to softmmu_ss to avoid that we have to compile this file multiple times. Message-Id: <20230508120314.59274-1-thuth@redhat.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-02hw/net/allwinner-sun8i-emac: Correctly byteswap descriptor fieldsPeter Maydell1-7/+15
In allwinner-sun8i-emac we just read directly from guest memory into a host FrameDescriptor struct and back. This only works on little-endian hosts. Reading and writing of descriptors is already abstracted into functions; make those functions also handle the byte-swapping so that TransferDescriptor structs as seen by the rest of the code are always in host-order, and fix two places that were doing ad-hoc descriptor reading without using the functions. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230424165053.1428857-3-peter.maydell@linaro.org
2023-05-02hw/net/msf2-emac: Don't modify descriptor in-place in emac_store_desc()Peter Maydell1-7/+11
The msf2-emac ethernet controller has functions emac_load_desc() and emac_store_desc() which read and write the in-memory descriptor blocks and handle conversion between guest and host endianness. As currently written, emac_store_desc() does the endianness conversion in-place; this means that it effectively consumes the input EmacDesc struct, because on a big-endian host the fields will be overwritten with the little-endian versions of their values. Unfortunately, in all the callsites the code continues to access fields in the EmacDesc struct after it has called emac_store_desc() -- specifically, it looks at the d.next field. The effect of this is that on a big-endian host networking doesn't work because the address of the next descriptor is corrupted. We could fix this by making the callsite avoid using the struct; but it's more robust to have emac_store_desc() leave its input alone. (emac_load_desc() also does an in-place conversion, but here this is fine, because the function is supposed to be initializing the struct.) Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20230424151919.1333299-1-peter.maydell@linaro.org
2023-05-02hw/net: npcm7xx_emc: set MAC in register spacePatrick Venture1-7/+25
The MAC address set from Qemu wasn't being saved into the register space. Reviewed-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Patrick Venture <venture@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: moved variable declaration to top of function] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-04-28hw: replace most qemu_bh_new calls with qemu_bh_new_guardedAlexander Bulekov1-1/+2
This protects devices from bh->mmio reentrancy issues. Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Darren Kenny <darren.kenny@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230427211013.2994127-5-alxndr@bu.edu> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-04-20hw/net/imx_fec: Support two Ethernet interfaces connected to single MDIO busGuenter Roeck1-4/+23
The SOC on i.MX6UL and i.MX7 has 2 Ethernet interfaces. The PHY on each may be connected to separate MDIO busses, or both may be connected on the same MDIO bus using different PHY addresses. Commit 461c51ad4275 ("Add a phy-num property to the i.MX FEC emulator") added support for specifying PHY addresses, but it did not provide support for linking the second PHY on a given MDIO bus to the other Ethernet interface. To be able to support two PHY instances on a single MDIO bus, two properties are needed: First, there needs to be a flag indicating if the MDIO bus on a given Ethernet interface is connected. If not, attempts to read from this bus must always return 0xffff. Implement this property as phy-connected. Second, if the MDIO bus on an interface is active, it needs a link to the consumer interface to be able to provide PHY access for it. Implement this property as phy-consumer. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20230315145248.1639364-2-linux@roeck-us.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2025-02-05 00:14:52 +0000