aboutsummaryrefslogtreecommitdiff
path: root/hw/net
AgeCommit message (Collapse)AuthorFilesLines
2021-07-04Merge remote-tracking branch 'remotes/philmd/tags/mips-20210702' into stagingPeter Maydell2-164/+155
MIPS patches queue - Extract nanoMIPS, microMIPS, Code Compaction from translate.c - Allow PCI config accesses smaller than 32-bit on Bonito64 device - Fix migration of g364fb device on Jazz Magnum - Fix dp8393x PROM checksum on Jazz Magnum and Quadra 800 - Map the UART devices unconditionally on Jazz Magnum - Add functional test booting Linux on the Fuloong 2E # gpg: Signature made Fri 02 Jul 2021 16:36:19 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd/tags/mips-20210702: hw/mips/jazz: Map the UART devices unconditionally hw/mips/jazz: specify correct endian for dp8393x device hw/m68k/q800: fix PROM checksum and MAC address storage qemu/bitops.h: add bitrev8 implementation dp8393x: remove onboard PROM containing MAC address and checksum hw/m68k/q800: move PROM and checksum calculation from dp8393x device to board hw/mips/jazz: move PROM and checksum calculation from dp8393x device to board dp8393x: convert to trace-events dp8393x: checkpatch fixes g364fb: add VMStateDescription for G364SysBusState g364fb: use RAM memory region for framebuffer tests/acceptance: Test Linux on the Fuloong 2E machine hw/pci-host/bonito: Allow PCI config accesses smaller than 32-bit hw/pci-host/bonito: Trace PCI config accesses smaller than 32-bit target/mips: Extract nanoMIPS ISA translation routines target/mips: Extract the microMIPS ISA translation routines target/mips: Extract Code Compaction ASE translation routines target/mips: Add declarations for generic TCG helpers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-02dp8393x: remove onboard PROM containing MAC address and checksumMark Cave-Ayland1-24/+0
According to the datasheet the dp8393x chipset does not contain any NVRAM capable of storing a MAC address or checksum. Now that both the MIPS jazz and m68k q800 boards generate the PROM region and checksum themselves, remove the generated PROM from the dp8393x device itself. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210625065401.30170-6-mark.cave-ayland@ilande.co.uk> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-07-02dp8393x: convert to trace-eventsMark Cave-Ayland2-35/+37
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Finn Thain <fthain@linux-m68k.org> Message-Id: <20210625065401.30170-3-mark.cave-ayland@ilande.co.uk> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-07-02dp8393x: checkpatch fixesMark Cave-Ayland1-109/+122
Also fix a simple comment typo of "constrainst" to "constraints". Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Finn Thain <fthain@linux-m68k.org> Message-Id: <20210625065401.30170-2-mark.cave-ayland@ilande.co.uk> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-06-30vhost: Distinguish errors in vhost_dev_get_config()Kevin Wolf1-1/+1
Instead of just returning 0/-1 and letting the caller make up a meaningless error message, add an Error parameter to allow reporting the real error and switch to 0/-errno so that different kind of errors can be distinguished in the caller. config_len in vhost_user_get_config() is defined by the device, so if it's larger than VHOST_USER_MAX_CONFIG_SIZE, this is a programming error. Turn the corresponding check into an assertion. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210609154658.350308-6-kwolf@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-30vhost: Add Error parameter to vhost_dev_init()Kevin Wolf1-1/+5
This allows callers to return better error messages instead of making one up while the real error ends up on stderr. Most callers can immediately make use of this because they already have an Error parameter themselves. The others just keep printing the error with error_report_err(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210609154658.350308-2-kwolf@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-04Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell2-3/+116
staging # gpg: Signature made Fri 04 Jun 2021 08:26:16 BST # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: MAINTAINERS: Added eBPF maintainers information. docs: Added eBPF documentation. virtio-net: Added eBPF RSS to virtio-net. ebpf: Added eBPF RSS loader. ebpf: Added eBPF RSS program. net: Added SetSteeringEBPF method for NetClientState. net/tap: Added TUNSETSTEERINGEBPF code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-04virtio-net: Added eBPF RSS to virtio-net.Andrew Melnychenko2-3/+116
When RSS is enabled the device tries to load the eBPF program to select RX virtqueue in the TUN. If eBPF can be loaded the RSS will function also with vhost (works with kernel 5.8 and later). Software RSS is used as a fallback with vhost=off when eBPF can't be loaded or when hash population requested by the guest. Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by: Andrew Melnychenko <andrew@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella1-1/+1
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-28Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell3-5/+6
staging # gpg: Signature made Thu 27 May 2021 04:06:17 BST # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: tap-bsd: Remove special casing for older OpenBSD releases virtio-net: failover: add missing remove_migration_state_change_notifier() hw/net/imx_fec: return 0xffff when accessing non-existing PHY Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-27virtio-net: failover: add missing remove_migration_state_change_notifier()Laurent Vivier1-0/+1
In the failover case configuration, virtio_net_device_realize() uses an add_migration_state_change_notifier() to add a state notifier, but this notifier is not removed by the unrealize function when the virtio-net card is unplugged. If the card is unplugged and a migration is started, the notifier is called and as it is not valid anymore QEMU crashes. This patch fixes the problem by adding the remove_migration_state_change_notifier() in virtio_net_device_unrealize(). The problem can be reproduced with: $ qemu-system-x86_64 -enable-kvm -m 1g -M q35 \ -device pcie-root-port,slot=4,id=root1 \ -device pcie-root-port,slot=5,id=root2 \ -device virtio-net-pci,id=net1,mac=52:54:00:6f:55:cc,failover=on,bus=root1 \ -monitor stdio disk.qcow2 (qemu) device_del net1 (qemu) migrate "exec:gzip -c > STATEFILE.gz" Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault. 0x0000000000000000 in ?? () (gdb) bt #0 0x0000000000000000 in () #1 0x0000555555d726d7 in notifier_list_notify (...) at .../util/notify.c:39 #2 0x0000555555842c1a in migrate_fd_connect (...) at .../migration/migration.c:3975 #3 0x0000555555950f7d in migration_channel_connect (...) error@entry=0x0) at .../migration/channel.c:107 #4 0x0000555555910922 in exec_start_outgoing_migration (...) at .../migration/exec.c:42 Reported-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-05-27hw/net/imx_fec: return 0xffff when accessing non-existing PHYGuenter Roeck2-5/+5
If a PHY does not exist, attempts to read from it should return 0xffff. Otherwise the Linux kernel will believe that a PHY is there and select the non-existing PHY. This in turn will result in network errors later on since the real PHY is not selected or configured. Since reading from or writing to a non-existing PHY is not an emulation error, replace guest error messages with traces. Fixes: 461c51ad4275 ("Add a phy-num property to the i.MX FEC emulator") Cc: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-05-16Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-1/+1
pc,pci,virtio: bugfixes, improvements Fixes all over the place. Faster boot for virtio. ioeventfd support for mmio. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 14 May 2021 15:27:13 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: Fix build with 64 bits time_t vhost-vdpa: Make vhost_vdpa_get_device_id() static hw/virtio: enable ioeventfd configuring for mmio hw/smbios: support for type 41 (onboard devices extended information) checkpatch: Fix use of uninitialized value virtio-scsi: Configure all host notifiers in a single MR transaction virtio-scsi: Set host notifiers and callbacks separately virtio-blk: Configure all host notifiers in a single MR transaction virtio-blk: Fix rollback path in virtio_blk_data_plane_start() pc-dimm: remove unnecessary get_vmstate_memory_region() method amd_iommu: fix wrong MMIO operations virtio-net: Constify VirtIOFeature feature_sizes[] virtio-blk: Constify VirtIOFeature feature_sizes[] hw/virtio: Pass virtio_feature_get_config_size() a const argument x86: acpi: use offset instead of pointer when using build_header() amd_iommu: Fix pte_override_page_mask() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/arm/virt.c
2021-05-14virtio-net: Constify VirtIOFeature feature_sizes[]Philippe Mathieu-Daudé1-1/+1
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210511104157.2880306-4-philmd@redhat.com>
2021-05-12Drop the deprecated lm32 targetMarkus Armbruster3-560/+0
Target lm32 was deprecated in commit d8498005122, v5.2.0. See there for rationale. Some of its code lives on in device models derived from milkymist ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c. Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-2-armbru@redhat.com> Acked-by: Michael Walle <michael@walle.cc> [Trivial conflicts resolved, reST markup fixed]
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth1-1/+0
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include cpu.h if it's not really necessaryThomas Huth1-1/+0
Stop including cpu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-4-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include sysemu/sysemu.h if it's not really necessaryThomas Huth3-3/+0
Stop including sysemu/sysemu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-2-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Do not include qemu/log.h if it is not necessaryThomas Huth1-1/+0
Many files include qemu/log.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210328054833.2351597-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-04-08Revert "net: Move NetClientState.info_str to dynamic allocations"Jason Wang1-2/+3
Several issues has been reported for query-netdev info series. Consider it's late in the rc, this reverts commit commit 59b5437eb732d6b103a9bc279c3482c834d1eff9. Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-31hw/net: fsl_etsec: Tx padding length should exclude CRCBin Meng1-1/+1
As the comment of tx_padding_and_crc() says: "Never add CRC in QEMU", min_frame_len should excluce CRC, so it should be 60 instead of 64. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20210316081505.72898-1-bmeng.cn@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-03-30net/npcm7xx_emc.c: Fix handling of receiving packets when RSDR not setDoug Evans1-1/+3
Turning REG_MCMDR_RXON is enough to start receiving packets. Signed-off-by: Doug Evans <dje@google.com> Message-id: 20210319195044.741821-1-dje@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-22hw/net: virtio-net: Initialize nc->do_not_pad to trueBin Meng1-0/+4
For virtio-net, there is no need to pad the Ethernet frame size to 60 bytes before sending to it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15net: Move NetClientState.info_str to dynamic allocationsAlexey Kirillov1-3/+2
The info_str field of the NetClientState structure is static and has a size of 256 bytes. This amount is often unclaimed, and the field itself is used exclusively for HMP "info network". The patch translates info_str to dynamic memory allocation. This action is also allows us to painlessly discard usage of this field for backend devices. Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15lan9118: switch to use qemu_receive_packet() for loopbackAlexander Bulekov1-1/+1
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15cadence_gem: switch to use qemu_receive_packet() for loopbackAlexander Bulekov1-2/+2
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15pcnet: switch to use qemu_receive_packet() for loopbackAlexander Bulekov1-1/+1
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Buglink: https://bugs.launchpad.net/qemu/+bug/1917085 Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15rtl8139: switch to use qemu_receive_packet() for loopbackAlexander Bulekov1-1/+1
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Buglink: https://bugs.launchpad.net/qemu/+bug/1910826 Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15tx_pkt: switch to use qemu_receive_packet_iov() for loopbackJason Wang1-1/+1
This patch switches to use qemu_receive_receive_iov() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15sungem: switch to use qemu_receive_packet() for loopbackJason Wang1-1/+1
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15msf2-mac: switch to use qemu_receive_packet() for loopbackJason Wang1-1/+1
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15dp8393x: switch to use qemu_receive_packet() for loopback packetJason Wang1-1/+1
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15e1000: switch to use qemu_receive_packet() for loopbackJason Wang1-1/+1
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15e1000: fail early for evil descriptorJason Wang1-0/+4
During procss_tx_desc(), driver can try to chain data descriptor with legacy descriptor, when will lead underflow for the following calculation in process_tx_desc() for bytes: if (tp->size + bytes > msh) bytes = msh - tp->size; This will lead a infinite loop. So check and fail early if tp->size if greater or equal to msh. Reported-by: Alexander Bulekov <alxndr@bu.edu> Reported-by: Cheolwoo Myung <cwmyung@snu.ac.kr> Reported-by: Ruhr-University Bochum <bugs-syssec@rub.de> Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-14Merge remote-tracking branch ↵Peter Maydell1-26/+32
'remotes/pmaydell/tags/pull-target-arm-20210314' into staging target-arm queue: * versal: Support XRAMs and XRAM controller * smmu: Various minor bug fixes * SVE emulation: fix bugs handling odd vector lengths * allwinner-sun8i-emac: traverse transmit queue using TX_CUR_DESC register value * tests/acceptance: fix orangepi-pc acceptance tests * hw/timer/sse-timer: Propagate eventual error in sse_timer_realize() * hw/arm/virt: KVM: The IPA lower bound is 32 * npcm7xx: support MFT module * pl110, pxa2xx_lcd: tidy up template headers # gpg: Signature made Sun 14 Mar 2021 13:17:43 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210314: (39 commits) hw/display/pxa2xx: Inline template header hw/display/pxa2xx: Apply whitespace-only coding style fixes to template header hw/display/pxa2xx: Apply brace-related coding style fixes to template header hw/display/pxa2xx: Remove use of BITS in pxa2xx_template.h hw/display/pxa2xx_lcd: Remove dest_width state field hw/display/pxa2xx_lcd: Remove dead code for non-32-bpp surfaces hw/display/pl110: Remove use of BITS from pl110_template.h hw/display/pl110: Pull included-once parts of template header into pl110.c hw/display/pl110: Remove dead code for non-32-bpp surfaces tests/qtest: Test PWM fan RPM using MFT in PWM test hw/arm: Connect PWM fans in NPCM7XX boards hw/arm: Add MFT device to NPCM7xx Soc hw/misc: Add NPCM7XX MFT Module hw/misc: Add GPIOs for duty in NPCM7xx PWM hw/arm/virt: KVM: The IPA lower bound is 32 accel: kvm: Fix kvm_type invocation hw/timer/sse-timer: Propagate eventual error in sse_timer_realize() tests/acceptance: drop ARMBIAN_ARTIFACTS_CACHED condition for orangepi-pc, cubieboard tests tests/acceptance: update sunxi kernel from armbian to 5.10.16 tests/acceptance/boot_linux_console: change URL for test_arm_orangepi_bionic_20_08 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/net/allwinner-sun8i-emac: traverse transmit queue using TX_CUR_DESC ↵Niek Linnenbank1-26/+32
register value Currently the emulated EMAC for sun8i always traverses the transmit queue from the head when transferring packets. It searches for a list of consecutive descriptors whichs are flagged as ready for processing and transmits their payloads accordingly. The controller stops processing once it finds a descriptor that is not marked ready. While the above behaviour works in most situations, it is not the same as the actual EMAC in hardware. Actual hardware uses the TX_CUR_DESC register value to keep track of the last position in the transmit queue and continues processing from that position when software triggers the start of DMA processing. The currently emulated behaviour can lead to packet loss on transmit when software fills the transmit queue with ready descriptors that overlap the tail of the circular list. This commit modifies the emulated EMAC for sun8i such that it processes the transmit queue using the TX_CUR_DESC register in the same way as hardware. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210310195820.21950-2-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210310' ↵Peter Maydell2-0/+2
into staging ppc patch queue for 2021-03-10 Next batch of patches for the ppc target and machine types. Includes: * Several cleanups for sm501 from Peter Maydell * An update to the SLOF guest firmware * Improved handling of hotplug failures in spapr, associated cleanups to the hotplug handling code * Several etsec fixes and cleanups from Bin Meng * Assorted other fixes and cleanups # gpg: Signature made Wed 10 Mar 2021 04:08:53 GMT # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dg-gitlab/tags/ppc-for-6.0-20210310: spapr.c: send QAPI event when memory hotunplug fails spapr.c: remove duplicated assert in spapr_memory_unplug_request() target/ppc: fix icount support on Book-e vms accessing SPRs qemu_timer.c: add timer_deadline_ms() helper spapr_pci.c: add 'unplug already in progress' message for PCI unplug spapr.c: add 'unplug already in progress' message for PHB unplug hw/ppc: e500: Add missing <ranges> in the eTSEC node hw/net: fsl_etsec: Fix build error when HEX_DUMP is on spapr_drc.c: use DRC reconfiguration to cleanup DIMM unplug state spapr_drc.c: add hotunplug timeout for CPUs spapr_drc.c: introduce unplug_timeout_timer target/ppc: Fix bcdsub. emulation when result overflows docs/system: Extend PPC section spapr: rename spapr_drc_detach() to spapr_drc_unplug_request() spapr_drc.c: use spapr_drc_release() in isolate_physical/set_unusable pseries: Update SLOF firmware image spapr_drc.c: do not call spapr_drc_detach() in drc_isolate_logical() hw/display/sm501: Inline template header into C file hw/display/sm501: Expand out macros in template header hw/display/sm501: Remove dead code for non-32-bit RGB surfaces Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-09sysemu: Let VMChangeStateHandler take boolean 'running' argumentPhilippe Mathieu-Daudé1-1/+1
The 'running' argument from VMChangeStateHandler does not require other value than 0 / 1. Make it a plain boolean. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20210111152020.1422021-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-10hw/net: fsl_etsec: Fix build error when HEX_DUMP is onBin Meng2-0/+2
"qemu-common.h" should be included to provide the forward declaration of qemu_hexdump() when HEX_DUMP is on. Signed-off-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20210228050431.24647-1-bmeng.cn@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-03-09Various spelling fixesMichael Tokarev1-1/+1
An assorted set of spelling fixes in various places. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-05hw/net: Add npcm7xx emc modelDoug Evans3-0/+875
This is a 10/100 ethernet device that has several features. Only the ones needed by the Linux driver have been implemented. See npcm7xx_emc.c for a list of unimplemented features. Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Signed-off-by: Doug Evans <dje@google.com> Message-id: 20210218212453.831406-2-dje@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-02virtio-net: handle zero mac for a vdpa peerCindy Lu1-0/+12
Some mlx vdpa devices with kernels at least up to 5.11 currently present 0 as their MAC address. This is because they have not been pre-configured with a MAC: they have a learning bridge and only learn the MAC once guest is up. Kernel patches and tools to allow programming the MAC from host are being developed. For now - since these combinations exist in the field - let's detect zero mac and just try to proceed with the mac from the qemu command line. This makes the guest use this MAC to send packets in turn teaching the MAC to the card, and things work. TODO: report the actual MAC from QEMU commad line in the info message. TODO: detect that a (non-zero) hardware MAC does not match QEMU command line and fail init. Signed-off-by: Cindy Lu <lulu@redhat.com> Message-Id: <20210225165506.18321-2-lulu@redhat.com> mst: rewritten code comments, message printed and the commit log. Cc: Eli Cohen <elic@nvidia.com> Cc: Parav Pandit <parav@nvidia.com> Tested-by: Adrian Moreno <amorenoz@redhat.com> Tested-by: Sean Mooney <smooney@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-02-23failover: really display a warning when the primary device is not foundLaurent Vivier1-11/+9
In failover_add_primary(), we search the id of the failover device by scanning the list of the devices in the opts list to find a device with a failover_pair_id equals to the id of the virtio-net device. If the failover_pair_id is not found, QEMU ignores the primary device silently (which also means it will not be hidden and it will be enabled directly at boot). After that, we search the id in the opts list to do a qdev_device_add() with it. The device will be always found as otherwise we had exited before, and thus the warning is never displayed. Fix that by moving the error report to the first exit condition. Also add a g_assert() to be sure the compiler will not complain about a possibly NULL pointer. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20210212135250.2738750-4-lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-02-23virtio-net: add missing object_unref()Laurent Vivier1-0/+2
failover_add_primary() calls qdev_device_add() and doesn't unref the device. Because of that, when the device is unplugged a reference is remaining and prevents the cleanup of the object. This prevents to be able to plugin back the failover primary device, with errors like: (qemu) device_add vfio-pci,host=0000:41:00.0,id=hostdev0,bus=root.3,failover_pair_id=net0 (qemu) device_del hostdev0 We can check with "info qtree" and "info pci" that the device has been removed, and then: (qemu) device_add vfio-pci,host=0000:41:00.0,id=hostdev1,bus=root.3,failover_pair_id=net0 Error: vfio 0000:41:00.0: device is already attached (qemu) device_add vfio-pci,host=0000:41:00.0,id=hostdev0,bus=root.3,failover_pair_id=net0 qemu-kvm: Duplicate ID 'hostdev0' for device Fixes: 21e8709b29cd ("failover: Remove primary_dev member") Cc: quintela@redhat.com Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20210212135250.2738750-3-lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com>
2021-02-10hw/net: fsl_etsec: Reverse the RCTRL.RSF logicBin Meng1-1/+1
Per MPC8548ERM [1] chapter 14.5.3.4.1: When RCTRL.RSF is 1, frames less than 64 bytes are accepted upon a DA match. But currently QEMU does the opposite. This commit reverses the RCTRL.RSF testing logic to match the manual. Due to the reverse of the logic, certain guests may potentially break if they don't program eTSEC to have RCTRL.RSF bit set. When RCTRL.RSF is 0, short frames are silently dropped, however as of today both slirp and tap networking do not pad short frames (e.g.: an ARP packet) to the minimum frame size of 60 bytes. So ARP requests will be dropped, preventing the guest from becoming visible on the network. The same issue was reported on e1000 and vmxenet3 before, see: commit 78aeb23eded2 ("e1000: Pad short frames to minimum size (60 bytes)") commit 40a87c6c9b11 ("vmxnet3: Pad short frames to minimum size (60 bytes)") [1] https://www.nxp.com/docs/en/reference-manual/MPC8548ERM.pdf Fixes: eb1e7c3e5146 ("Add Enhanced Three-Speed Ethernet Controller (eTSEC)") Signed-off-by: Bin Meng <bin.meng@windriver.com> Message-Id: <1612923021-19746-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-01-25net: checksum: Introduce fine control over checksum typeBin Meng7-26/+33
At present net_checksum_calculate() blindly calculates all types of checksums (IP, TCP, UDP). Some NICs may have a per type setting in their BDs to control what checksum should be offloaded. To support such hardware behavior, introduce a 'csum_flag' parameter to the net_checksum_calculate() API to allow fine control over what type checksum is calculated. Existing users of this API are updated accordingly. Signed-off-by: Bin Meng <bin.meng@windriver.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-01-12hw/net/lan9118: Add symbolic constants for register offsetsPeter Maydell1-6/+18
The lan9118 code mostly uses symbolic constants for register offsets; the exceptions are those which the datasheet doesn't give an official symbolic name to. Add some names for the registers which don't already have them, based on the longer names they are given in the memory map. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210108180401.2263-3-peter.maydell@linaro.org
2021-01-12hw/net/lan9118: Fix RX Status FIFO PEEK valuePeter Maydell1-1/+1
A copy-and-paste error meant that the return value for register offset 0x44 (the RX Status FIFO PEEK register) returned a byte from a bogus offset in the rx status FIFO. Fix the typo. Cc: qemu-stable@nongnu.org Fixes: https://bugs.launchpad.net/qemu/+bug/1904954 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210108180401.2263-2-peter.maydell@linaro.org
2021-01-08Remove superfluous timer_del() callsPeter Maydell6-16/+0
This commit is the result of running the timer-del-timer-free.cocci script on the whole source tree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
2021-01-01Merge remote-tracking branch ↵Peter Maydell1-0/+1
'remotes/ehabkost-gl/tags/machine-next-pull-request' into staging Machine queue, 2020-12-23 Cleanup: * qdev code cleanup (Eduardo Habkost) Bug fix: * hostmem: Free host_nodes list right after visited (Keqian Zhu) # gpg: Signature made Wed 23 Dec 2020 21:25:58 GMT # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost-gl/tags/machine-next-pull-request: bugfix: hostmem: Free host_nodes list right after visited qdev: Avoid unnecessary DeviceState* variable at set_prop_arraylen() qdev: Rename qdev_get_prop_ptr() to object_field_prop_ptr() qdev: Move qdev_prop_tpm declaration to tpm_prop.h qdev: Make qdev_class_add_property() more flexible qdev: Make PropertyInfo.create return ObjectProperty* qdev: Move dev->realized check to qdev_property_set() qdev: Wrap getters and setters in separate helpers qdev: Add name argument to PropertyInfo.create method qdev: Add name parameter to qdev_class_add_property() qdev: Avoid using prop->name unnecessarily qdev: Get just property name at error_set_from_qdev_prop_error() sparc: Use DEFINE_PROP for nwindows property qdev: Reuse DEFINE_PROP in all DEFINE_PROP_* macros qdev: Move softmmu properties to qdev-properties-system.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2024-09-11 12:00:27 +0000