aboutsummaryrefslogtreecommitdiff
path: root/hw/misc
AgeCommit message (Collapse)AuthorFilesLines
2021-09-30qbus: Rename qbus_create() to qbus_new()Peter Maydell1-1/+1
Rename the "allocate and return" qbus creation function to qbus_new(), to bring it into line with our _init vs _new convention. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210923121153.23754-6-peter.maydell@linaro.org
2021-09-30qbus: Rename qbus_create_inplace() to qbus_init()Peter Maydell4-8/+8
Rename qbus_create_inplace() to qbus_init(); this is more in line with our usual naming convention for functions that in-place initialize objects. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20210923121153.23754-5-peter.maydell@linaro.org
2021-09-20hw/arm/aspeed: Initialize AST2600 UART clock selection registersPeter Delevoryas1-0/+4
UART5 is typically used as the default debug UART on the AST2600, but UART1 is also designed to be a debug UART. All the AST2600 UART's have semi-configurable clock rates through registers in the System Control Unit (SCU), but only UART5 works out of the box with zero-initialized values. The rest of the UART's expect a few of the registers to be initialized to non-zero values, or else the clock rate calculation will yield zero or undefined (due to a divide-by-zero). For reference, the U-Boot clock rate driver here shows the calculation: https://github.com/facebook/openbmc-uboot/blob/15f7e0dc01d8/drivers/clk/aspeed/clk_ast2600.c#L357 To summarize, UART5 allows selection from 4 rates: 24 MHz, 192 MHz, 24 / 13 MHz, and 192 / 13 MHz. The other UART's allow selecting either the "low" rate (UARTCLK) or the "high" rate (HUARTCLK). UARTCLK and HUARTCLK are configurable themselves: UARTCLK = UXCLK * R / (N * 2) HUARTCLK = HUXCLK * HR / (HN * 2) UXCLK and HUXCLK are also configurable, and depend on the APLL and/or HPLL clock rates, which also derive from complicated calculations. Long story short, there's lots of multiplication and division from configurable registers, and most of these registers are zero-initialized in QEMU, which at best is unexpected and at worst causes this clock rate driver to hang from divide-by-zero's. This can also be difficult to diagnose, because it may cause U-Boot to hang before serial console initialization completes, requiring intervention from gdb. This change just initializes all of these registers with default values from the datasheet. To test this, I used Facebook's AST2600 OpenBMC image for "fuji", with the following diff applied (because fuji uses UART1 for console output, not UART5). @@ -323,8 +323,8 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) } /* UART - attach an 8250 to the IO space as our UART5 */ - serial_mm_init(get_system_memory(), sc->memmap[ASPEED_DEV_UART5], 2, - aspeed_soc_get_irq(s, ASPEED_DEV_UART5), + serial_mm_init(get_system_memory(), sc->memmap[ASPEED_DEV_UART1], 2, + aspeed_soc_get_irq(s, ASPEED_DEV_UART1), 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN); /* I2C */ Without these clock rate registers being initialized, U-Boot hangs in the clock rate driver from a divide-by-zero, because the UART1 clock rate register reads return zero, and there's no console output. After initializing them with default values, fuji boots successfully. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Joel Stanley <joel@jms.id.au> [ clg: Removed _PARAM suffix ] Message-Id: <20210906134023.3711031-2-pdel@fb.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-20aspeed: Emulate the AST2600A3Joel Stanley1-7/+29
This is the latest revision of the ASPEED 2600 SoC. As there is no need to model multiple revisions of the same SoC for the moment, update the SCU AST2600 to model the A3 revision instead of the A1 and adapt the AST2600 SoC and machines. Reset values are taken from v8 of the datasheet. Signed-off-by: Joel Stanley <joel@jms.id.au> [ clg: - Introduced an Aspeed "ast2600-a3" SoC class - Commit log update ] Message-Id: <20210629142336.750058-3-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-20misc/pca9552: Fix LED status register indexing in pca955x_get_led()Andrew Jeffery1-1/+1
There was a bit of a thinko in the state calculation where every odd pin in was reported in e.g. "pwm0" mode rather than "off". This was the result of an incorrect bit shift for the 2-bit field representing each LED state. Fixes: a90d8f84674d ("misc/pca9552: Add qom set and get") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210723043624.348158-1-andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-09-13hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phaseBin Meng1-13/+18
As of today, when booting upstream U-Boot for Xilinx Zynq, the UART does not receive anything. Debugging shows that the UART input clock frequency is zero which prevents the UART from receiving anything as per the logic in uart_receive(). From zynq_slcr_reset_exit() comment, it intends to compute output clocks according to ps_clk and registers. zynq_slcr_compute_clocks() is called to accomplish the task, inside which device_is_in_reset() is called to actually make the attempt in vain. Rework reset_hold() and reset_exit() so that in the reset exit phase, the logic can really compute output clocks in reset_exit(). With this change, upstream U-Boot boots properly again with: $ qemu-system-arm -M xilinx-zynq-a9 -m 1G -display none -serial null -serial stdio \ -device loader,file=u-boot-dtb.bin,addr=0x4000000,cpu-num=0 Fixes: 38867cb7ec90 ("hw/misc/zynq_slcr: add clock generation for uarts") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20210901124521.30599-2-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-08mac_via: add qdev gpios for nubus slot interrupts to VIA2Mark Cave-Ayland1-0/+23
These will soon be required to enable nubus devices to support interrupts. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210830102447.10806-13-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: remove explicit viaN prefix from VIA IRQ gpiosMark Cave-Ayland1-6/+3
Now that q800 VIA1 and VIA2 are completely separate devices there is no need to add a specific device prefix to ensure that the IRQ lines remain separate. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210830102447.10806-11-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: remove mac_via deviceMark Cave-Ayland1-65/+13
Remove the mac_via device and wire up both q800 VIA1 and VIA2 directly for the m68k q800 machine. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210830102447.10806-10-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: move VIA1 realize logic from mac_via_realize() to ↵Mark Cave-Ayland1-42/+44
mos6522_q800_via1_realize() Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210830102447.10806-9-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: move VIA1 reset logic from mac_via_reset() to mos6522_q800_via1_reset()Mark Cave-Ayland1-14/+8
After this change mac_via_reset() is now empty and can be removed. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210830102447.10806-8-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: move q800 VIA1 timer variables to q800 VIA1 VMStateDescriptionMark Cave-Ayland1-15/+5
These variables are already present in MOS6522Q800VIA1State and so it is just the VMStateDescription move that is needed. With this change the mac_via VMStateDescription is now empty and can be removed completely. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210830102447.10806-7-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: move ADB variables to MOS6522Q800VIA1StateMark Cave-Ayland1-86/+83
The ADB is accessed using clock and data pins on q800 VIA1 port B and so can be moved to MOS6522Q800VIA1State. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210830102447.10806-6-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: move PRAM/RTC variables to MOS6522Q800VIA1StateMark Cave-Ayland1-68/+67
The PRAM/RTC is accessed using clock and data pins on q800 VIA1 port B and so can be moved to MOS6522Q800VIA1State. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210830102447.10806-5-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: move PRAM contents and block backend to MOS6522Q800VIA1StateMark Cave-Ayland1-29/+30
The PRAM contents are accessed using clock and data pins on q800 VIA1 port B and so can be moved to MOS6522Q800VIA1State. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210830102447.10806-4-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: move last_b variable into q800 VIA1 VMStateDescriptionMark Cave-Ayland1-1/+1
This variable is already present in MOS6522Q800VIA1State and can be moved immediately into the q800 VIA1 VMStateDescription. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210830102447.10806-3-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-08mac_via: introduce new VMStateDescription for q800 VIA1 and VIA2Mark Cave-Ayland1-4/+24
Move the parent mos6522 objects from vmstate_mac_via into the new VMStateDescription structures to begin the process of splitting MacVIAState into separate VIA1 and VIA2 devices. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210830102447.10806-2-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-09-01arm: Move M-profile RAS register block into its own devicePeter Maydell2-0/+95
Currently we implement the RAS register block within the NVIC device. It isn't really very tightly coupled with the NVIC proper, so instead move it out into a sysbus device of its own and have the top level ARMv7M container create it and map it into memory at the right address. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-id: 20210812093356.1946-2-peter.maydell@linaro.org
2021-07-11Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into stagingPeter Maydell9-1678/+52
Some qemu updates for IPMI and I2C Move some ADC file to where they belong and move some sensors to a sensor directory, since with new BMCs coming in lots of different sensors should be coming in. Keep from cluttering things up. Add support for I2C PMBus devices. Replace the confusing and error-prone i2c_send_recv and i2c_transfer with specific send and receive functions. Several errors have already been made with these, avoid any new errors. Fix the watchdog_expired field in the IPMI watchdog, it's not a bool, it's a u8. After a vmstate transfer, the new value could be wrong. # gpg: Signature made Fri 09 Jul 2021 17:25:04 BST # gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81 # gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown] # gpg: aka "Corey Minyard <minyard@acm.org>" [unknown] # gpg: aka "Corey Minyard <corey@minyard.net>" [unknown] # gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81 * remotes/cminyard/tags/for-qemu-6.1-2: (24 commits) tests/qtest: add tests for MAX34451 device model hw/misc: add MAX34451 device tests/qtest: add tests for ADM1272 device model hw/misc: add ADM1272 device hw/i2c: add support for PMBus ipmi/sim: fix watchdog_expired data type error in IPMIBmcSim struct hw/i2c: Introduce i2c_start_recv() and i2c_start_send() hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer() hw/i2c: Make i2c_start_transfer() direction argument a boolean hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address() hw/i2c: Remove confusing i2c_send_recv() hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/misc/auxbus: Replace 'is_write' boolean by its value hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT cases hw/misc/auxbus: Fix MOT/classic I2C mode hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/i2c/ppc4xx_i2c: Add reference to datasheet hw/display/sm501: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/display/sm501: Simplify sm501_i2c_write() logic hw/input/lm832x: Define TYPE_LM8323 in public header ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-08hw/i2c: Introduce i2c_start_recv() and i2c_start_send()Philippe Mathieu-Daudé1-6/+6
To ease reviewing code using the I2C bus API, introduce the i2c_start_recv() and i2c_start_send() helpers which don't take the confusing 'is_recv' boolean argument. Use these new helpers in the SMBus / AUX bus models. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send()Philippe Mathieu-Daudé1-24/+11
Instead of using the confuse i2c_send_recv(), replace i2c_send_recv(send = true) by i2c_send() and i2c_send_recv(send = false) by i2c_recv(). During the replacement we also change a while() statement by for(). The resulting code is easier to review. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/misc/auxbus: Replace 'is_write' boolean by its valuePhilippe Mathieu-Daudé1-17/+11
Remove the 'is_write' boolean by directly using its value in place. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT casesPhilippe Mathieu-Daudé1-0/+53
To allow further simplifications in the following commits, start copying WRITE_I2C code to the READ_I2C, and READ_I2C_MOT to WRITE_I2C_MOT. No logical change. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08hw/misc/auxbus: Fix MOT/classic I2C modePhilippe Mathieu-Daudé1-3/+3
Since its introduction in commit 6fc7f77fd2 i2c_start_transfer() uses incorrectly the direction of the transfer (the last argument is called 'is_recv'). Fix by inverting the argument, we now have is_recv = !is_write. Fixes: 6fc7f77fd2 ("introduce aux-bus") Reported-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-02hw/arm: Add basic power management to raspi.Nolan Leake2-0/+161
This is just enough to make reboot and poweroff work. Works for linux, u-boot, and the arm trusted firmware. Not tested, but should work for plan9, and bare-metal/hobby OSes, since they seem to generally do what linux does for reset. The watchdog timer functionality is not yet implemented. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/64 Signed-off-by: Nolan Leake <nolan@sigbus.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210625210209.1870217-1-nolan@sigbus.net [PMM: tweaked commit title; fixed region size to 0x200; moved header file to include/] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-17sensor: Move hardware sensors from misc to a sensor directoryCorey Minyard6-1115/+0
Lots of this are expected to be coming in, create a directory for them. Also move the tmp105.h file into the include directory where it should be. Cc: Cédric Le Goater <clg@kaod.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: Cédric Le Goater <clg@kaod.org>
2021-06-17adc: Move the max111x driver to the adc directoryCorey Minyard3-240/+0
It's an adc, put it where it belongs. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-06-17adc: Move the zynq-xadc file to the adc directoriesCorey Minyard2-306/+1
It's an ADC, put it where it belongs. Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Alistair Francis <alistair@alistair23.me> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2021-06-15softmmu/memory: Pass ram_flags to qemu_ram_alloc_from_fd()David Hildenbrand1-3/+2
Let's pass in ram flags just like we do with qemu_ram_alloc_from_file(), to clean up and prepare for more flags. Simplify the documentation of passed ram flags: Looking at our documentation of RAM_SHARED and RAM_PMEM is sufficient, no need to be repetitive. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210510114328.21835-5-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-03arm: Consistently use "Cortex-Axx", not "Cortex Axx"Peter Maydell1-1/+1
The official punctuation for Arm CPU names uses a hyphen, like "Cortex-A9". We mostly follow this, but in a few places usage without the hyphen has crept in. Fix those so we consistently use the same way of writing the CPU name. This commit was created with: git grep -z -l 'Cortex ' | xargs -0 sed -i 's/Cortex /Cortex-/' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20210527095152.10968-1-peter.maydell@linaro.org
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella2-2/+2
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-12Drop the deprecated unicore32 targetMarkus Armbruster2-162/+0
Target unicore32 was deprecated in commit 8e4ff4a8d2b, v5.2.0. See there for rationale. Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-3-armbru@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com>
2021-05-12Drop the deprecated lm32 targetMarkus Armbruster4-731/+0
Target lm32 was deprecated in commit d8498005122, v5.2.0. See there for rationale. Some of its code lives on in device models derived from milkymist ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c. Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-2-armbru@redhat.com> Acked-by: Michael Walle <michael@walle.cc> [Trivial conflicts resolved, reST markup fixed]
2021-05-10hw/misc/mps2-scc: Support using CFG0 bit 0 for remappingPeter Maydell1-3/+10
On some boards, SCC config register CFG0 bit 0 controls whether parts of the board memory map are remapped. Support this with: * a device property scc-cfg0 so the board can specify the initial value of the CFG0 register * an outbound GPIO line which tracks bit 0 and which the board can wire up to provide the remapping Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210504120912.23094-3-peter.maydell@linaro.org
2021-05-05Merge remote-tracking branch ↵Peter Maydell15-15/+1
'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging Trivial patches pull request 20210503 # gpg: Signature made Mon 03 May 2021 09:34:56 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: (23 commits) hw/rx/rx-gdbsim: Do not accept invalid memory size docs: More precisely describe memory-backend-*::id's user scripts: fix generation update-binfmts templates docs/system: Document the removal of "compat" property for POWER CPUs mc146818rtc: put it into the 'misc' category Do not include exec/address-spaces.h if it's not really necessary Do not include cpu.h if it's not really necessary Do not include hw/boards.h if it's not really necessary Do not include sysemu/sysemu.h if it's not really necessary hw: Do not include qemu/log.h if it is not necessary hw: Do not include hw/irq.h if it is not necessary hw: Do not include hw/sysbus.h if it is not necessary hw: Remove superfluous includes of hw/hw.h ui: Fix memory leak in qemu_xkeymap_mapping_table() hw/usb: Constify VMStateDescription hw/display/qxl: Constify VMStateDescription hw/arm: Constify VMStateDescription vmstate: Constify some VMStateDescriptions Fix typo in CFI build documentation hw/pcmcia: Do not register PCMCIA type if not required ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-02Do not include cpu.h if it's not really necessaryThomas Huth1-1/+0
Stop including cpu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-4-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include sysemu/sysemu.h if it's not really necessaryThomas Huth1-1/+0
Stop including sysemu/sysemu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-2-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Do not include qemu/log.h if it is not necessaryThomas Huth5-5/+0
Many files include qemu/log.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210328054833.2351597-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Do not include hw/irq.h if it is not necessaryThomas Huth2-2/+0
Many files include hw/irq.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210327050236.2232347-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Remove superfluous includes of hw/hw.hThomas Huth5-5/+0
The include/hw/hw.h header only has a prototype for hw_error(), so it does not make sense to include this in files that do not use this function. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210326151848.2217216-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw/arm: Constify VMStateDescriptionPhilippe Mathieu-Daudé1-1/+1
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210313171150.2122409-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-01hw/misc/aspeed_xdma: Add AST2600 supportCédric Le Goater1-23/+101
When we introduced support for the AST2600 SoC, the XDMA controller was forgotten. It went unnoticed because it's not used under emulation. But the register layout being different, the reset procedure is bogus and this breaks kexec. Add a AspeedXDMAClass to take into account the register differences. Cc: Eddie James <eajames@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Eddie James <eajames@linux.ibm.com> Message-Id: <20210407171637.777743-14-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-05-01hw: Model ASPEED's Hash and Crypto EngineJoel Stanley2-0/+390
The HACE (Hash and Crypto Engine) is a device that offloads MD5, SHA1, SHA2, RSA and other cryptographic algorithms. This initial model implements a subset of the device's functionality; currently only MD5/SHA hashing, and on the ast2600's scatter gather engine. Co-developed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> [ clg: - fixes for 32-bit and OSX builds ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210409000253.1475587-2-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-19hw: Replace anti-social QOM type namesMarkus Armbruster1-1/+1
Several QOM type names contain ',': ARM,bitband-memory etraxfs,pic etraxfs,serial etraxfs,timer fsl,imx25 fsl,imx31 fsl,imx6 fsl,imx6ul fsl,imx7 grlib,ahbpnp grlib,apbpnp grlib,apbuart grlib,gptimer grlib,irqmp qemu,register SUNW,bpp SUNW,CS4231 SUNW,DBRI SUNW,DBRI.prom SUNW,fdtwo SUNW,sx SUNW,tcx xilinx,zynq_slcr xlnx,zynqmp xlnx,zynqmp-pmu-soc xlnx,zynq-xadc These are all device types. They can't be plugged with -device / device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one actually works. They *can* be used with -device / device_add to request help. Usability is poor, though: you have to double the comma, like this: $ qemu-system-x86_64 -device SUNW,,fdtwo,help Trap for the unwary. The fact that this was broken in device-introspect-test for more than six years until commit e27bd49876 fixed it demonstrates that "the unwary" includes seasoned developers. One QOM type name contains ' ': "ICH9 SMB". Because having to remember just one way to quote would be too easy. Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and ' ' by '-' in the other type names. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210304140229.575481-2-armbru@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-18Merge remote-tracking branch 'remotes/vivier/tags/q800-for-6.0-pull-request' ↵Peter Maydell2-121/+77
into staging q800 pull request 20210316 Several fixes for mac_via needed for future support of MacOS ROM # gpg: Signature made Tue 16 Mar 2021 21:14:42 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/q800-for-6.0-pull-request: mac_via: remove VIA1 timer optimisations mac_via: fix 60Hz VIA1 timer interval mac_via: rename VBL timer to 60Hz timer mac_via: don't re-inject ADB response when switching to IDLE state mac_via: allow long accesses to VIA registers mac_via: fix up adb_via_receive() trace events mac_via: switch rtc pram trace-events to use hex rather than decimal for addresses Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-16mac_via: remove VIA1 timer optimisationsMark Cave-Ayland1-39/+4
The original implementation of the Macintosh VIA devices in commit 6dca62a000 "hw/m68k: add VIA support" used timer optimisations to reduce high CPU usage on the host when booting Linux. These optimisations worked by waiting until VIA1 port B was accessed before re-arming the timers. The MacOS toolbox ROM constantly writes to VIA1 port B which calls via1_one_second_update() and via1_sixty_hz_update() to calculate the new expiry time, causing the timers to constantly reset and never fire. The effect of this is that the Ticks (0x16a) global variable holding the number of 60Hz timer ticks since reset is never incremented by the interrupt causing time to stand still. Whilst the code was introduced as a performance optimisation, it is likely that the high CPU usage was actually caused by the incorrect 60Hz timer interval fixed in the previous patch. Remove the optimisation to keep everything simple and enable the MacOS toolbox ROM to start keeping time. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210311100505.22596-8-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-16mac_via: fix 60Hz VIA1 timer intervalMark Cave-Ayland1-2/+9
The 60Hz timer is initialised using timer_new_ns() meaning that the timer interval should be measured in ns, and therefore its period is a thousand times too short. Use a define for the 60Hz timer period taking the more precise value as documented in the Guide To The Macintosh Family Hardware. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20210311100505.22596-7-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-16mac_via: rename VBL timer to 60Hz timerMark Cave-Ayland1-20/+21
According to the "Guide To The Macintosh Family Hardware", the 60Hz VIA1 timer on newer Macs such as the Quadra only exists for compatibility with old software and is no longer synced to the VBL interval. Rename the VBL timer to 60Hz timer to emphasise this and to prevent confusion when the real VBL interrupt (now handled as a NuBus slot interrupt) is added in future. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20210311100505.22596-6-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-16mac_via: don't re-inject ADB response when switching to IDLE stateMark Cave-Ayland1-51/+27
The current workaround for the Linux ADB state machine in kernels < 5.6 switching the VIA back to IDLE state between send and receive modes is to re-inject the first byte of the response in the IDLE state, and then force the state machine into generating an autopoll reply. In fact what is happening is much simpler: analysis of traces from a real Quadra suggest that the existing data is returned as the first autopoll response rather than generating an immediate response starting whilst still in IDLE state. Update the ADB receive code to work in the same way, which allows the re-injection code to be completely removed from adb_via_receive() and for adb_via_poll() to be simplified accordingly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20210311100505.22596-5-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-16mac_via: allow long accesses to VIA registersMark Cave-Ayland1-2/+2
The MacOS SCSI driver uses a long access to read the VIA registers rather than just a single byte during the message out phase. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210311100505.22596-4-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
generated by cgit v1.1 at 2024-11-02 23:17:28 +0000