aboutsummaryrefslogtreecommitdiff
path: root/hw/misc/meson.build
AgeCommit message (Collapse)AuthorFilesLines
2023-01-12hw/misc: Allwinner A10 DRAM Controller EmulationStrahinja Jankovic1-0/+1
During SPL boot several DRAM Controller registers are used. Most important registers are those related to DRAM initialization and calibration, where SPL initiates process and waits until certain bit is set/cleared. This patch adds these registers, initializes reset values from user's guide and updates state of registers as SPL expects it. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-3-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/misc: Allwinner-A10 Clock Controller Module EmulationStrahinja Jankovic1-0/+1
During SPL boot several Clock Controller Module (CCM) registers are read, most important are PLL and Tuning, as well as divisor registers. This patch adds these registers and initializes reset values from user's guide. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-2-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-12-15hw/misc: Move some arm-related files from specific_ss into softmmu_ssThomas Huth1-6/+5
The header target/arm/kvm-consts.h checks CONFIG_KVM which is marked as poisoned in common code, so the files that include this header have to be added to specific_ss and recompiled for each, qemu-system-arm and qemu-system-aarch64. However, since the kvm headers are only optionally used in kvm-constants.h for some sanity checks, we can additionally check the NEED_CPU_H macro first to avoid the poisoned CONFIG_KVM macro, so kvm-constants.h can also be used from "common" files (without the sanity checks - which should be OK since they are still done from other target-specific files instead). This way, and by adjusting some other include statements in the related files here and there, we can move some files from specific_ss into softmmu_ss, so that they only need to be compiled once during the build process. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221202154023.293614-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-30hw/misc/aspeed: Add PECI controllerPeter Delevoryas1-1/+2
This introduces a really basic PECI controller that responses to commands by always setting the response code to success and then raising an interrupt to indicate the command is done. This helps avoid getting hit with constant errors if the driver continuously attempts to send a command and keeps timing out. The AST2400 and AST2500 only included registers up to 0x5C, not 0xFC. They supported PECI 1.1, 2.0, and 3.0. The AST2600 and AST1030 support PECI 4.0, which includes more read/write buffer registers from 0x80 to 0xFC to support 64-byte mode. This patch doesn't attempt to handle that, or to create a different version of the controller for the different generations, since it's only implementing functionality that is common to all generations. The basic sequence of events is that the firmware will read and write to various registers and then trigger a command by setting the FIRE bit in the command register (similar to the I2C controller). Then the firmware waits for an interrupt from the PECI controller, expecting the interrupt status register to be filled in with info on what happened. If the command was transmitted and received successfully, then response codes from the host CPU will be found in the data buffer registers. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-12-me@pjd.dev> [ clg: s/sysbus_mmio_map/aspeed_mmio_map/ ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-08lasi: move from hw/hppa to hw/miscMark Cave-Ayland1-0/+3
Move the LASI device implementation from hw/hppa to hw/misc so that it is located with all the other miscellaneous devices. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-43-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-04-21hw/misc: Add a model of the Xilinx Versal CRLEdgar E. Iglesias1-0/+1
Add a model of the Xilinx Versal CRL. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Frederic Konrad <fkonrad@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20220406174303.2022038-4-edgar.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-18hw/misc: Add a model of the Xilinx ZynqMP APU ControlEdgar E. Iglesias1-0/+1
Add a model of the Xilinx ZynqMP APU Control. Reviewed-by: Luc Michel <luc@lmichel.fr> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20220316164645.2303510-6-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-03-18hw/misc: Add a model of the Xilinx ZynqMP CRFEdgar E. Iglesias1-0/+1
Add a model of the Xilinx ZynqMP CRF. At the moment this is mostly a stub model. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20220316164645.2303510-4-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-26ast2600: Add Secure Boot Controller modelJoel Stanley1-0/+1
Just a stub that indicates the system has booted in secure boot mode. Used for testing the driver: https://lore.kernel.org/all/20211019080608.283324-1-joel@jms.id.au/ Signed-off-by: Joel Stanley <joel@jms.id.au> [ clg: - Fixed typo - Adjusted Copyright dates ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-28hw/misc: Add a model of Versal's PMC SLCRFrancisco Iglesias1-1/+4
Add a model of Versal's PMC SLCR (system-level control registers). Signed-off-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20220121161141.14389-2-francisco.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-20hw/misc/aspeed_i3c.c: Introduce a dummy AST2600 I3C model.Troy Lee1-0/+1
Aspeed 2600 SDK enables I3C support by default. The I3C driver will try to reset the device controller and set it up through device address table register. This dummy model responds to these registers with default values as listed in the ast2600v10 datasheet chapter 54.2. This avoids a guest machine kernel panic due to referencing an invalid kernel address if the device address table register isn't set correctly. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Reviewed-by: Graeme Gregory <quic_ggregory@quicinc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Graeme Gregory <quic_ggregory@quicinc.com> Message-id: 20220111084546.4145785-2-troy_lee@aspeedtech.com [PMM: tidied commit message; fixed format strings] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-01arm: Move M-profile RAS register block into its own devicePeter Maydell1-0/+2
Currently we implement the RAS register block within the NVIC device. It isn't really very tightly coupled with the NVIC proper, so instead move it out into a sysbus device of its own and have the top level ARMv7M container create it and map it into memory at the right address. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alexandre Iooss <erdnaxe@crans.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-id: 20210812093356.1946-2-peter.maydell@linaro.org
2021-07-11Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into stagingPeter Maydell1-5/+1
Some qemu updates for IPMI and I2C Move some ADC file to where they belong and move some sensors to a sensor directory, since with new BMCs coming in lots of different sensors should be coming in. Keep from cluttering things up. Add support for I2C PMBus devices. Replace the confusing and error-prone i2c_send_recv and i2c_transfer with specific send and receive functions. Several errors have already been made with these, avoid any new errors. Fix the watchdog_expired field in the IPMI watchdog, it's not a bool, it's a u8. After a vmstate transfer, the new value could be wrong. # gpg: Signature made Fri 09 Jul 2021 17:25:04 BST # gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81 # gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown] # gpg: aka "Corey Minyard <minyard@acm.org>" [unknown] # gpg: aka "Corey Minyard <corey@minyard.net>" [unknown] # gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81 * remotes/cminyard/tags/for-qemu-6.1-2: (24 commits) tests/qtest: add tests for MAX34451 device model hw/misc: add MAX34451 device tests/qtest: add tests for ADM1272 device model hw/misc: add ADM1272 device hw/i2c: add support for PMBus ipmi/sim: fix watchdog_expired data type error in IPMIBmcSim struct hw/i2c: Introduce i2c_start_recv() and i2c_start_send() hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer() hw/i2c: Make i2c_start_transfer() direction argument a boolean hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address() hw/i2c: Remove confusing i2c_send_recv() hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/misc/auxbus: Replace 'is_write' boolean by its value hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT cases hw/misc/auxbus: Fix MOT/classic I2C mode hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/i2c/ppc4xx_i2c: Add reference to datasheet hw/display/sm501: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/display/sm501: Simplify sm501_i2c_write() logic hw/input/lm832x: Define TYPE_LM8323 in public header ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-02hw/arm: Add basic power management to raspi.Nolan Leake1-0/+1
This is just enough to make reboot and poweroff work. Works for linux, u-boot, and the arm trusted firmware. Not tested, but should work for plan9, and bare-metal/hobby OSes, since they seem to generally do what linux does for reset. The watchdog timer functionality is not yet implemented. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/64 Signed-off-by: Nolan Leake <nolan@sigbus.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210625210209.1870217-1-nolan@sigbus.net [PMM: tweaked commit title; fixed region size to 0x200; moved header file to include/] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-17sensor: Move hardware sensors from misc to a sensor directoryCorey Minyard1-3/+0
Lots of this are expected to be coming in, create a directory for them. Also move the tmp105.h file into the include directory where it should be. Cc: Cédric Le Goater <clg@kaod.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Acked-by: Cédric Le Goater <clg@kaod.org>
2021-06-17adc: Move the max111x driver to the adc directoryCorey Minyard1-1/+0
It's an adc, put it where it belongs. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-06-17adc: Move the zynq-xadc file to the adc directoriesCorey Minyard1-1/+1
It's an ADC, put it where it belongs. Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Alistair Francis <alistair@alistair23.me> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2021-05-12Drop the deprecated unicore32 targetMarkus Armbruster1-3/+0
Target unicore32 was deprecated in commit 8e4ff4a8d2b, v5.2.0. See there for rationale. Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-3-armbru@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com>
2021-05-12Drop the deprecated lm32 targetMarkus Armbruster1-1/+0
Target lm32 was deprecated in commit d8498005122, v5.2.0. See there for rationale. Some of its code lives on in device models derived from milkymist ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c. Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-2-armbru@redhat.com> Acked-by: Michael Walle <michael@walle.cc> [Trivial conflicts resolved, reST markup fixed]
2021-05-01hw: Model ASPEED's Hash and Crypto EngineJoel Stanley1-0/+1
The HACE (Hash and Crypto Engine) is a device that offloads MD5, SHA1, SHA2, RSA and other cryptographic algorithms. This initial model implements a subset of the device's functionality; currently only MD5/SHA hashing, and on the ast2600's scatter gather engine. Co-developed-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> [ clg: - fixes for 32-bit and OSX builds ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20210409000253.1475587-2-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-15m68k: add a system controllerLaurent Vivier1-0/+3
Add a system controller for the m68k-virt machine. This controller allows the kernel to power off or reset the machine. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-5-laurent@vivier.eu>
2021-03-12hw/misc: Add NPCM7XX MFT ModuleHao Wu1-0/+1
This patch implements Multi Function Timer (MFT) module for NPCM7XX. This module is mainly used to configure PWM fans. It has just enough functionality to make the PWM fan kernel module work. The module takes two input, the max_rpm of a fan (modifiable via QMP) and duty cycle (a GPIO from the PWM module.) The actual measured RPM is equal to max_rpm * duty_cycle / NPCM7XX_PWM_MAX_DUTY. The RPM is measured as a counter compared to a prescaled input clock. The kernel driver reads this counter and report to user space. Refs: https://github.com/torvalds/linux/blob/master/drivers/hwmon/npcm750-pwm-fan.c Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/misc: versal: Add a model of the XRAM controllerEdgar E. Iglesias1-0/+1
Add a model of the Xilinx Versal Accelerator RAM (XRAM). This is mainly a stub to make firmware happy. The size of the RAMs can be probed. The interrupt mask logic is modelled but none of the interrups will ever be raised unless injected. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20210308224637.2949533-2-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20210309' ↵Peter Maydell1-1/+6
into staging Aspeed patches : * New model for the Aspeed LPC controller * Misc cleanups # gpg: Signature made Tue 09 Mar 2021 11:54:25 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20210309: hw/misc: Model KCS devices in the Aspeed LPC controller hw/misc: Add a basic Aspeed LPC controller model hw/arm: ast2600: Correct the iBT interrupt ID hw/arm: ast2600: Set AST2600_MAX_IRQ to value from datasheet hw/arm: ast2600: Force a multiple of 32 of IRQs for the GIC hw/arm/aspeed: Fix location of firmware images in documentation arm/ast2600: Fix SMP booting with -kernel Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-09hw/misc: Add a basic Aspeed LPC controller modelCédric Le Goater1-1/+6
This is a very minimal framework to access registers which are used to configure the AHB memory mapping of the flash chips on the LPC HC Firmware address space. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-Id: <20210302014317.915120-5-andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2021-03-08hw/misc/sse-cpu-pwrctrl: Implement SSE-300 CPU<N>_PWRCTRL register blockPeter Maydell1-0/+1
The SSE-300 has a new register block CPU<N>_PWRCTRL. There is one instance of this per CPU in the system (so just one for the SSE-300), and as well as the usual CIDR/PIDR ID registers it has just one register, CPUPWRCFG. This register allows the guest to configure behaviour of the system in power-down and deep-sleep states. Since QEMU does not model those, we make the register a dummy reads-as-written implementation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-21-peter.maydell@linaro.org
2021-01-29hw/misc/pvpanic: add PCI interface supportMihai Carabas1-0/+1
Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-29hw/misc/pvpanic: split-out generic and bus dependent codeMihai Carabas1-1/+2
To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-12hw/misc: Add a PWM module for NPCM7XXHao Wu1-0/+1
The PWM module is part of NPCM7XX module. Each NPCM7XX module has two identical PWM modules. Each module contains 4 PWM entries. Each PWM has two outputs: frequency and duty_cycle. Both are computed using inputs from software side. This module does not model detail pulse signals since it is expensive. It also does not model interrupts and watchdogs that are dependant on the detail models. The interfaces for these are left in the module so that anyone in need for these functionalities can implement on their own. The user can read the duty cycle and frequency using qom-get command. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-5-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-10hw/misc: add an EMC141{3,4} device modelJohn Wang1-0/+1
Largely inspired by the TMP421 temperature sensor, here is a model for the EMC1413/EMC1414 temperature sensors. Specs can be found here : http://ww1.microchip.com/downloads/en/DeviceDoc/20005274A.pdf Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20201122105134.671-1-wangzhiqiang.bj@bytedance.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-11-03hw/misc: Add Microchip PolarFire SoC SYSREG module supportBin Meng1-0/+1
This creates a minimum model for Microchip PolarFire SoC SYSREG module. It only implements the ENVM_CR register to tell guest software that eNVM is running at the configured divider rate. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-7-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/misc: Add Microchip PolarFire SoC IOSCB module supportBin Meng1-0/+1
This creates a model for PolarFire SoC IOSCB [1] module. It actually contains lots of sub-modules like various PLLs to control different peripherals. Only the mininum capabilities are emulated to make the HSS DDR memory initialization codes happy. Lots of sub-modules are created as an unimplemented devices. [1] PF_SoC_RegMap_V1_1/MPFS250T/mpfs250t_ioscb_memmap_dri.htm in https://www.microsemi.com/document-portal/doc_download/1244581-polarfire-soc-register-map Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-5-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/misc: Add Microchip PolarFire SoC DDR Memory Controller supportBin Meng1-0/+1
The PolarFire SoC DDR Memory Controller mainly includes 2 modules, called SGMII PHY module and the CFG module, as documented in the chipset datasheet. This creates a single file that groups these 2 modules, providing the minimum functionalities that make the HSS DDR initialization codes happy. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-3-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-29Merge remote-tracking branch ↵Peter Maydell1-0/+2
'remotes/pmaydell/tags/pull-target-arm-20201027-1' into staging target-arm queue: * raspi: add model of cprman clock manager * sbsa-ref: add an SBSA generic watchdog device * arm/trace: Fix hex printing * raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+ * hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly * Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support * hw/arm: fix min_cpus for xlnx-versal-virt platform * hw/arm/highbank: Silence warnings about missing fallthrough statements * linux-user: Support Aarch64 BTI * Armv7M systick: fix corner case bugs by rewriting to use ptimer # gpg: Signature made Tue 27 Oct 2020 11:27:10 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20201027-1: (48 commits) hw/timer/armv7m_systick: Rewrite to use ptimers hw/core/ptimer: Support ptimer being disabled by timer callback hw/arm/sbsa-ref: add SBSA watchdog device hw/watchdog: Implement SBSA watchdog device hw/arm/bcm2835_peripherals: connect the UART clock hw/char/pl011: add a clock input hw/misc/bcm2835_cprman: add sane reset values to the registers hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer hw/misc/bcm2835_cprman: implement clock mux behaviour hw/misc/bcm2835_cprman: add a clock mux skeleton implementation hw/misc/bcm2835_cprman: implement PLL channels behaviour hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation hw/misc/bcm2835_cprman: implement PLLs behaviour hw/misc/bcm2835_cprman: add a PLL skeleton implementation hw/arm/raspi: add a skeleton implementation of the CPRMAN hw/arm/raspi: fix CPRMAN base address hw/core/clock: trace clock values in Hz instead of ns hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macro arm/trace: Fix hex printing hw/arm/raspi: Add the Raspberry Pi 3 model A+ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/arm/raspi: add a skeleton implementation of the CPRMANLuc Michel1-0/+1
The BCM2835 CPRMAN is the clock manager of the SoC. It is composed of a main oscillator, and several sub-components (PLLs, multiplexers, ...) to generate the BCM2835 clock tree. This commit adds a skeleton of the CPRMAN, with a dummy register read/write implementation. It embeds the main oscillator (xosc) from which all the clocks will be derived. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/misc: Add npcm7xx random number generatorHavard Skinnemoen1-0/+1
The RNG module returns a byte of randomness when the Data Valid bit is set. This implementation ignores the prescaler setting, and loads a new value into RNGD every time RNGCS is read while the RNG is enabled and random data is available. A qtest featuring some simple randomness tests is included. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-26hw/misc/led: Add a LED devicePhilippe Mathieu-Daudé1-0/+1
Add a LED device which can be connected to a GPIO output. They can also be dimmed with PWM devices. For now we do not implement the dimmed mode, but in preparation of a future implementation, we start using the LED intensity. LEDs are limited to a fixed set of colors. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200912134041.946260-2-f4bug@amsat.org>
2020-09-14hw/misc: Add NPCM7xx Clock Controller device modelHavard Skinnemoen1-0/+1
Enough functionality to boot the Linux kernel has been implemented. This includes: - Correct power-on reset values so the various clock rates can be accurately calculated. - Clock enables stick around when written. In addition, a best effort attempt to implement SECCNT and CNTR25M was made even though I don't think the kernel needs them. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-3-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/misc: Add NPCM7xx System Global Control Registers device modelHavard Skinnemoen1-0/+3
Implement a device model for the System Global Control Registers in the NPCM730 and NPCM750 BMC SoCs. This is primarily used to enable SMP boot (the boot ROM spins reading the SCRPAD register) and DDR memory initialization; other registers are best effort for now. The reset values of the MDLR and PWRON registers are determined by the SoC variant (730 vs 750) and board straps respectively. Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-2-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-09hw/riscv: Move sifive_test model to hw/miscBin Meng1-0/+1
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_test model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_u_otp model to hw/miscBin Meng1-0/+1
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_otp model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_u_prci model to hw/miscBin Meng1-0/+1
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_e_prci model to hw/miscBin Meng1-0/+3
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_e_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-01hw/misc/sbsa_ec : Add an embedded controller for sbsa-refGraeme Gregory1-0/+2
A difference between sbsa platform and the virt platform is PSCI is handled by ARM-TF in the sbsa platform. This means that the PSCI code there needs to communicate some of the platform power changes down to the qemu code for things like shutdown/reset control. Space has been left to extend the EC if we find other use cases in future where ARM-TF and qemu need to communicate. Signed-off-by: Graeme Gregory <graeme@nuviainc.com> Reviewed-by: Leif Lindholm <leif@nuviainc.com> Tested-by: Leif Lindholm <leif@nuviainc.com> Message-id: 20200826141952.136164-2-graeme@nuviainc.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-21meson: convert hw/miscMarc-André Lureau1-0/+99
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2025-01-09 11:13:21 +0000