aboutsummaryrefslogtreecommitdiff
path: root/hw/mips
AgeCommit message (Collapse)AuthorFilesLines
2016-03-04loader: Add data swap option to load-elfPeter Crosthwaite4-4/+4
Some CPUs are of an opposite data-endianness to other components in the system. Sometimes elfs have the data sections layed out with this CPU data-endianness accounting for when loaded via the CPU, so byte swaps (relative to other system components) will occur. The leading example, is ARM's BE32 mode, which is is basically LE with address manipulation on half-word and byte accesses to access the hw/byte reversed address. This means that word data is invariant across LE and BE32. This also means that instructions are still LE. The expectation is that the elf will be loaded via the CPU in this endianness scheme, which means the data in the elf is reversed at compile time. As QEMU loads via the system memory directly, rather than the CPU, we need a mechanism to reverse elf data endianness to implement this possibility. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03magnum: disable floppy DMA for nowHervé Poussineau1-1/+2
Floppy uses the DMA controller in rc4030 chipset, and not the i8259 from the ISA bus. It's better to disable DMA than to call the wrong DMA controller. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1453843944-26833-13-git-send-email-hpoussin@reactos.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-02-03i8257: pass ISA bus to DMA_init() functionHervé Poussineau3-3/+3
i8257 DMA controller exists on one ISA bus, so let's specify it at initialization. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1453843944-26833-3-git-send-email-hpoussin@reactos.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-01-23mips: Clean up includesPeter Maydell9-0/+9
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-01-13isa: Clean up error handling around isa_bus_new()Markus Armbruster2-2/+2
We can have at most one ISA bus. If you try to create another one, isa_bus_new() complains to stderr and returns null. isa_bus_new() is called in two contexts, machine's init() and device's realize() methods. Since complaining to stderr is not proper in the latter context, convert isa_bus_new() to Error. Machine's init(): * mips_jazz_init(), called from the init() methods of machines "magnum" and "pica" * mips_r4k_init(), the init() method of machine "mips" * pc_init1() called from the init() methods of non-q35 PC machines * typhoon_init(), called from clipper_init(), the init() method of machine "clipper" These callers always create the first ISA bus, hence isa_bus_new() can't fail. Simply pass &error_abort. Device's realize(): * i82378_realize(), of PCI device "i82378" * ich9_lpc_realize(), of PCI device "ICH9-LPC" * pci_ebus_realize(), of PCI device "ebus" * piix3_realize(), of PCI device "pci-piix3", abstract parent of "PIIX3" and "PIIX3-xen" * piix4_realize(), of PCI device "PIIX4" * vt82c686b_realize(), of PCI device "VT82C686B" Propagate the error. Note that these devices are typically created only by machine init() methods with qdev_init_nofail() or similar. If we screwed up and created an ISA bus before that call, we now give up right away. Before, we'd hobble on, and typically die in isa_bus_irqs(). Similar if someone finds a way to hot-plug one of these critters. Cc: Richard Henderson <rth@twiddle.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: "Hervé Poussineau" <hpoussin@reactos.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@pond.sub.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <1450370121-5768-11-git-send-email-armbru@redhat.com>
2016-01-11gt64120: convert to realize()Cao jin1-4/+2
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-12-04gt64xxx: fix decoding of ISD registerPaolo Bonzini1-1/+2
The GT64xxx's internal registers can be placed above the first 4 GiB in the address space, but not above the first 64 GiB. Correctly cast the register to a 64-bit integer, and mask away bits above bit 35. Datasheet at http://pdf.datasheetarchive.com/datasheetsmain/Datasheets-33/DSA-655889.pdf (bug reported by Coverity). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-30hw/mips_malta: Fix KVM PC initialisationJames Hogan1-1/+1
Commit 71c199c81d29 ("mips_malta: provide ememsize env variable to kernels") changed the meaning of loaderparams.ram_size to be the whole of RAM rather than just the low part below where the boot code is placed for KVM, but it didn't update the PC initialisation for KVM to use ram_low_size. Fix that now. Fixes: 71c199c81d29 ("mips_malta: provide ememsize env variable to kernels") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-09-25Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell4-4/+4
* First batch of MAINTAINERS updates * IOAPIC fixes (to pass kvm-unit-tests with -machine kernel_irqchip=off) * NBD API upgrades from Daniel * strtosz fixes from Marc-André * improved support for readonly=on on scsi-generic devices * new "info ioapic" and "info lapic" monitor commands * Peter Crosthwaite's ELF_MACHINE cleanups * docs patches from Thomas and Daniel # gpg: Signature made Fri 25 Sep 2015 11:20:52 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (52 commits) doc: Refresh URLs in the qemu-tech documentation docs: describe the QEMU build system structure / design typedef: add typedef for QemuOpts i386: interrupt poll processing i386: partial revert of interrupt poll fix ppc: Rename ELF_MACHINE to be PPC specific i386: Rename ELF_MACHINE to be x86 specific alpha: Remove ELF_MACHINE from cpu.h mips: Remove ELF_MACHINE from cpu.h sparc: Remove ELF_MACHINE from cpu.h s390: Remove ELF_MACHINE from cpu.h sh4: Remove ELF_MACHINE from cpu.h xtensa: Remove ELF_MACHINE from cpu.h tricore: Remove ELF_MACHINE from cpu.h or32: Remove ELF_MACHINE from cpu.h lm32: Remove ELF_MACHINE from cpu.h unicore: Remove ELF_MACHINE from cpu.h moxie: Remove ELF_MACHINE from cpu.h cris: Remove ELF_MACHINE from cpu.h m68k: Remove ELF_MACHINE from cpu.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-25mips: remove muldiv64()Laurent Vivier1-11/+8
Originally, timers were ticks based, and it made sense to add ticks to current time to know when to trigger an alarm. But since commit: 7447545 change all other clock references to use nanosecond resolution accessors All timers use nanoseconds and we need to convert ticks to nanoseconds, by doing something like: y = muldiv64(x, get_ticks_per_sec(), TIMER_FREQ) where x is the number of device ticks and y the number of system ticks. y is used as nanoseconds in timer functions, it works because 1 tick is 1 nanosecond. (get_ticks_per_sec() is 10^9) But as MIPS timer frequency is 100 MHz, we can also do: y = x * 10; /* 100 MHz period is 10 ns */ Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
2015-09-25mips: Remove ELF_MACHINE from cpu.hPeter Crosthwaite4-4/+4
The only generic code relying on this is linux-user, but linux users' default behaviour of defaulting ELF_MACHINE to ELF_ARCH will handle this. The bootloaders can just pass EM_MIPS directly, as that is architecture specific code. This removes another architecture specific definition from the global namespace. Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Acked-By: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-19Revert use of DEFINE_MACHINE() for registrations of multiple machinesAndreas Färber1-4/+24
The script used for converting from QEMUMachine had used one DEFINE_MACHINE() per machine registered. In cases where multiple machines are registered from one source file, avoid the excessive generation of module init functions by reverting this unrolling. Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-09-19Use DEFINE_MACHINE() to register all machinesEduardo Habkost5-56/+33
Convert all machines to use DEFINE_MACHINE() instead of QEMUMachine automatically using a script. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> [AF: Style cleanups, convert imx25_pdk machine] Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-09-18Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-09-18' ↵Peter Maydell5-6/+6
into staging Error reporting patches # gpg: Signature made Fri 18 Sep 2015 13:42:49 BST using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-error-2015-09-18: memory: Fix bad error handling in memory_region_init_ram_ptr() loader: Fix memory_region_init_resizeable_ram() error handling Fix bad error handling after memory_region_init_ram() error: New error_fatal MAINTAINERS: Add "Error reporting" entry error: Copy location information in error_copy() hmp: Allow for error message hints on HMP error: only prepend timestamp on stderr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-18Fix bad error handling after memory_region_init_ram()Markus Armbruster5-6/+6
Symptom: $ qemu-system-x86_64 -m 10000000 Unexpected error in ram_block_add() at /work/armbru/qemu/exec.c:1456: upstream-qemu: cannot set up guest memory 'pc.ram': Cannot allocate memory Aborted (core dumped) Root cause: commit ef701d7 screwed up handling of out-of-memory conditions. Before the commit, we report the error and exit(1), in one place, ram_block_add(). The commit lifts the error handling up the call chain some, to three places. Fine. Except it uses &error_abort in these places, changing the behavior from exit(1) to abort(), and thus undoing the work of commit 3922825 "exec: Don't abort when we can't allocate guest memory". The three places are: * memory_region_init_ram() Commit 4994653 (right after commit ef701d7) lifted the error handling further, through memory_region_init_ram(), multiplying the incorrect use of &error_abort. Later on, imitation of existing (bad) code may have created more. * memory_region_init_ram_ptr() The &error_abort is still there. * memory_region_init_rom_device() Doesn't need fixing, because commit 33e0eb5 (soon after commit ef701d7) lifted the error handling further, and in the process changed it from &error_abort to passing it up the call chain. Correct, because the callers are realize() methods. Fix the error handling after memory_region_init_ram() with a Coccinelle semantic patch: @r@ expression mr, owner, name, size, err; position p; @@ memory_region_init_ram(mr, owner, name, size, ( - &error_abort + &error_fatal | err@p ) ); @script:python@ p << r.p; @@ print "%s:%s:%s" % (p[0].file, p[0].line, p[0].column) When the last argument is &error_abort, it gets replaced by &error_fatal. This is the fix. If the last argument is anything else, its position is reported. This lets us check the fix is complete. Four positions get reported: * ram_backend_memory_alloc() Error is passed up the call chain, ultimately through user_creatable_complete(). As far as I can tell, it's callers all handle the error sanely. * fsl_imx25_realize(), fsl_imx31_realize(), dp8393x_realize() DeviceClass.realize() methods, errors handled sanely further up the call chain. We're good. Test case again behaves: $ qemu-system-x86_64 -m 10000000 qemu-system-x86_64: cannot set up guest memory 'pc.ram': Cannot allocate memory [Exit 1 ] The next commits will repair the rest of commit ef701d7's damage. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1441983105-26376-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
2015-09-18target-mips: fix corner case in TLBWR causing QEMU to hangLeon Alrae1-2/+7
cpu_mips_get_random() function is used to generate a random index from CP0.Wired to TLBSize-1 range. Current implementation avoids generating the same as before value, hence the while loop. If the guest sets CP0.Wired to TLBSize-1 (which actually does not sound to be very practical) QEMU will get stuck in the loop infinitely as we always generate the same index. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-09-18pic32: use LCG algorithm for generated random index of TLBWR instructionSerge Vakulenko1-3/+6
The LFSR algorithm, used for generating random TLB indexes for TLBWR instruction, was inclined to produce a degenerate sequence in some cases. For example, for 16-entry TLB size and Wired=1, it gives: 15, 6, 7, 2, 7, 2, 7, 2, 7, 2, 7, 2, 7, 2, 7, 2, 7, 2, 7, 2, 7, 2, 7, 2, 7, 2, 7, 2... When replaced with LCG algorithm from ISO/IEC 9899 standard, the sequence looks much better, with about the same computational effort needed. Signed-off-by: Serge Vakulenko <serge.vakulenko@gmail.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-09-14Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell3-36/+3
* Support for jemalloc * qemu_mutex_lock_iothread "No such process" fix * cutils: qemu_strto* wrappers * iohandler.c simplification * Many other fixes and misc patches. And some MTTCG work (with Emilio's fixes squashed): * Signal-free TCG kick * Removing spinlock in favor of QemuMutex * User-mode emulation multi-threading fixes/docs # gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (44 commits) cutils: work around platform differences in strto{l,ul,ll,ull} cpu-exec: fix lock hierarchy for user-mode emulation exec: make mmap_lock/mmap_unlock globally available tcg: comment on which functions have to be called with mmap_lock held tcg: add memory barriers in page_find_alloc accesses remove unused spinlock. replace spinlock by QemuMutex. cpus: remove tcg_halt_cond and tcg_cpu_thread globals cpus: protect work list with work_mutex scripts/dump-guest-memory.py: fix after RAMBlock change configure: Add support for jemalloc add macro file for coccinelle configure: factor out adding disas configure vhost-scsi: fix wrong vhost-scsi firmware path checkpatch: remove tests that are not relevant outside the kernel checkpatch: adapt some tests to QEMU CODING_STYLE: update mixed declaration rules qmp: Add example usage of strto*l() qemu wrapper cutils: Add qemu_strtoull() wrapper cutils: Add qemu_strtoll() wrapper ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-11maint: avoid useless "if (foo) free(foo)" patternDaniel P. Berrange1-3/+1
The free() and g_free() functions both happily accept NULL on any platform QEMU builds on. As such putting a conditional 'if (foo)' check before calls to 'free(foo)' merely serves to bloat the lines of code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-09i8257: remove cpu_request_exit irqPaolo Bonzini3-36/+3
This is unused. cpu_exit now is almost exclusively an internal function to the CPU execution loop. In a few patches, we'll change the remaining occurrences to qemu_cpu_kick, making it truly internal. Reviewed-by: Richard henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-26target-mips: add Unified Hosting Interface (UHI) supportLeon Alrae1-1/+8
Add UHI semihosting support for MIPS. QEMU run with "-semihosting" option will alter the behaviour of SDBBP 1 instruction -- UHI operation will be called instead of generating a debug exception. Also tweak Malta's pseudo-bootloader. On CPU reset the $4 register is set to -1 if semihosting arguments are passed to indicate that the UHI operations should be used to obtain input arguments. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-26hw/mips: Do not clear BEV for MIPS malta kernel loadMatthew Fortune1-1/+1
The BEV flag controls whether the boot exception vector is still in place when starting a kernel. When cleared the exception vector at EBASE (or hard coded address of 0x80000000) is used instead. The early stages of the linux kernel would benefit from BEV still being set to ensure any faults get handled by the boot rom exception handlers. This is a moot point for system qemu as there aren't really any BEV handlers, but there are other good reasons to change this... The UHI (semi-hosting interface) defines special behaviours depending on whether an application starts in an environment with BEV set or cleared. When BEV is set then UHI assumes that a bootloader is relatively dumb and has no advanced exception handling logic. However, when BEV is cleared then UHI assumes that the bootloader has the ability to handle UHI exceptions with its exception handlers and will unwind and forward UHI SYSCALL exceptions to the exception vector that was installed prior to running the application. Signed-off-by: Matthew Fortune <matthew.fortune@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11net/dp8393x: add PROM to store MAC addressHervé Poussineau1-0/+1
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11net/dp8393x: QOM'ifyHervé Poussineau1-2/+10
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11dma/rc4030: convert to QOMHervé Poussineau1-14/+23
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11dma/rc4030: use AddressSpace and address_space_rw in usersHervé Poussineau1-3/+3
Now that rc4030 internally uses an AddressSpace for DMA handling, make its root memory region public. This is especially usefull for dp8393x netcard, which now uses well known QEMU types and methods. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11mips jazz: compile only in 64 bitHervé Poussineau2-6/+2
Remove now useless device models from other MIPS configurations We're now compiling 12 files less than before. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11mips_malta: provide ememsize env variable to kernelsPaul Burton1-6/+9
Commit 94c2b6aff43c (mips_malta: support up to 2GiB RAM) provided support for using over 256MB of RAM with the MIPS Malta board, including capping the memsize variable that QEMUs pseudo-bootloader provides to the kernel at 256MB in order to match YAMON. It didn't however provide the ememsize variable which kernels supporting memory outside of the unmapped address spaces (ie. EVA or highmem) may use to determine the true size of the RAM present in the system. Set ememsize to the size of RAM so that such kernels may use all available memory without the user having to manually specifying its size & location. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-04hw/acpi: piix4_pm_init(): take fw_cfg object no moreLaszlo Ersek1-1/+1
This PIIX4 init function has no more reason to receive a pointer to the FwCfg object. Remove the parameter from the prototype, and update callers. As a result, the pc_init1() function no longer needs to save the return value of pc_memory_init() and xen_load_linux(), which makes it more similar to pc_q35_init(). The return type & value of pc_memory_init() and xen_load_linux() are not changed themselves; maybe we'll need their return values sometime later. RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696 Cc: Amit Shah <amit.shah@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
2015-04-30target-mips: fix memory leakGonglei3-0/+3
Coveristy reports that variable prom_buf/params_buf going out of scope leaks the storage it points to. Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-26exec.c: Make address_space_rw take transaction attributesPeter Maydell1-2/+4
Make address_space_rw take transaction attributes, rather than always using the 'unspecified' attributes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-03-25mips: memory: Replace memory_region_init_ram with ↵Dirk Müller5-13/+8
memory_region_allocate_system_memory Commit 0b183fc871:"memory: move mem_path handling to memory_region_allocate_system_memory" split memory_region_init_ram and memory_region_init_ram_from_file. Also it moved mem-path handling a step up from memory_region_init_ram to memory_region_allocate_system_memory. Therefore for any board that uses memory_region_init_ram directly, -mem-path is not supported. Fix this by replacing memory_region_init_ram with memory_region_allocate_system_memory. Signed-off-by: Dirk Mueller <dmueller@suse.com> Message-Id: <CAL5wTH4-=HJUvwBu+2o6jGanJesJOyNf3sL8-5+d_-6C3cWBfA@mail.gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Acked-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-02Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' ↵Peter Maydell3-19/+6
into staging QOM infrastructure fixes and device conversions * Assertion fix for device_add with non-device types * Documentation fix * qdev_init() error reporting cleanups # gpg: Signature made Tue Feb 24 13:56:33 2015 GMT using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/qom-devices-for-peter: parallel: parallel_hds_isa_init() shouldn't fail parallel: Factor out common parallel_hds_isa_init() serial: serial_hds_isa_init() shouldn't fail serial: Factor out common serial_hds_isa_init() etsec: Replace qdev_init() by qdev_init_nofail() leon3: Replace unchecked qdev_init() by qdev_init_nofail() ide/isa: Replace unchecked qdev_init() by qdev_init_nofail() qdev: Improve qdev_init_nofail()'s error reporting qom: Fix typo, 'my_class_init' -> 'derived_class_init' qdev: Avoid type assertion in qdev_build_hotpluggable_device_list() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-24parallel: Factor out common parallel_hds_isa_init()Markus Armbruster2-6/+3
Maintainers of affected machines cc'ed. Cc: Anthony Liguori <aliguori@amazon.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-24serial: Factor out common serial_hds_isa_init()Markus Armbruster3-13/+3
It's the same old loop copied five times, plus another instance where it's clipped to two iterations and unrolled. No external users of serial_isa_init() are left, so give it internal linkage. Maintainers of affected machines cc'ed. Cc: Richard Henderson <rth@twiddle.net> Cc: Anthony Liguori <aliguori@amazon.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-13gt64xxx: remove isa_mem_base usageHervé Poussineau1-27/+68
Create a custom address space for PCI memory region and use it for the PCI bus. Dynamically handle PCI0 Mem0 and PCI0 Mem1 regions, as already done for PCI0 IO. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-02-13mips: remove isa_mem_base usageHervé Poussineau1-9/+10
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-02-13jazz: remove usage of isa_mem_baseHervé Poussineau1-11/+14
Do assorted changes in memory-mapped rtc interface. Also fix size of ISA I/O memory region, which should be 0x10000 bytes. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-02-13jazz: do not explode QEMUMachineInitArgs structureHervé Poussineau1-13/+8
Also remove address_space and address_space_io parameters, which where always get_system_memory() and get_system_io(). Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-02-13isa: add memory space parameter to isa_bus_newHervé Poussineau2-2/+2
Currently, keep current behaviour by always using get_system_memory(). Also use QOM casts when possible. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-17mips_mipssim: fix use-after-free for filenameGonglei1-1/+1
May pass freed pointer filename as an argument to error_report. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-22Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell4-8/+10
Block patches # gpg: Signature made Mon 20 Oct 2014 13:04:09 BST using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: (28 commits) block: Make device model's references to BlockBackend strong block: Lift device model API into BlockBackend blockdev: Convert qmp_eject(), qmp_change_blockdev() to BlockBackend block/qapi: Convert qmp_query_block() to BlockBackend blockdev: Fix blockdev-add not to create DriveInfo blockdev: Drop superfluous DriveInfo member id pc87312: Drop unused members of PC87312State ide: Complete conversion from BlockDriverState to BlockBackend hw: Convert from BlockDriverState to BlockBackend, mostly virtio-blk: Rename VirtIOBlkConf variables to conf virtio-blk: Drop redundant VirtIOBlock member conf block: Rename BlockDriverCompletionFunc to BlockCompletionFunc block: Rename BlockDriverAIOCB* to BlockAIOCB* block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo() block: Merge BlockBackend and BlockDriverState name spaces block: Eliminate BlockDriverState member device_name[] block: Eliminate bdrv_iterate(), use bdrv_next() blockdev: Eliminate drive_del() block: Make BlockBackend own its BlockDriverState block: Code motion to get rid of stubs/blockdev.c ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-20hw: Convert from BlockDriverState to BlockBackend, mostlyMarkus Armbruster4-7/+6
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo()Markus Armbruster2-3/+6
The patch is big, but all it really does is replacing dinfo->bdrv by blk_bs(blk_by_legacy_dinfo(dinfo)) The replacement is repetitive, but the conversion of device models to BlockBackend is imminent, and will shorten it to just blk_legacy_dinfo(dinfo). Line wrapping muddies the waters a bit. I also omit tests whether dinfo->bdrv is null, because it never is. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-14mips_malta: update malta's pseudo-bootloader - replace JR with JALRLeon Alrae1-5/+5
JR has been removed in R6 and now this instruction will cause Reserved Instruction Exception. Therefore use JALR with rd=0 which is equivalent to JR. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-03ide: Update ide_drive_get to be HBA agnosticJohn Snow3-3/+3
Instead of duplicating the logic for the if_ide (bus,unit) mappings, rely on the blockdev layer for managing those mappings for us, and use the drive_get_by_index call instead. This allows ide_drive_get to work for AHCI HBAs as well, and can be used in the Q35 initialization. Lastly, change the nature of the argument to ide_drive_get so that represents the number of total drives we can support, and not the total number of buses. This will prevent array overflows if the units-per-default-bus property ever needs to be adjusted for compatibility reasons. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1412187569-23452-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-09memory: add parameter errp to memory_region_init_ramHu Tao5-11/+19
Add parameter errp to memory_region_init_ram and update all call sites to pass in &error_abort. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-18memory: convert memory_region_destroy to object_unparentPaolo Bonzini1-1/+1
Explicitly call object_unparent in the few places where we will re-create the memory region. If the memory region is simply being destroyed as part of device teardown, let QOM handle it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-09mips_malta: Catch kernels linked at wrong addressJames Hogan1-0/+14
Add error reporting if the wrong type of kernel is provided for the current mode of acceleration. Currently a KVM kernel linked at 0x40000000 can't be used with TCG, and a normal kernel linked at 0x80000000 can't be used with KVM. Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-09mips_malta: Remove incorrect KVM T&E referencesJames Hogan1-3/+3
Fix the error message and code comments relating to KVM not supporting booting from the flash mapping when no kernel is provided. The issue is a general MIPS KVM issue and isn't specific to the Trap & Emulate version of MIPS KVM. Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Paolo Bonzini <pbonzini@redhat.com> Reported-by: Andreas Färber <afaerber@suse.de> Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-12-28 14:07:35 +0000