aboutsummaryrefslogtreecommitdiff
path: root/hw/mips/malta.c
AgeCommit message (Collapse)AuthorFilesLines
2023-06-05hw/mips/malta: Fix the malta machine on big endian hostsThomas Huth1-2/+2
Booting a Linux kernel with the malta machine is currently broken on big endian hosts. The cpu_to_gt32 macro wants to byteswap a value for little endian targets only, but uses the wrong way to do this: cpu_to_[lb]e32 works the other way round on big endian hosts! Fix it by using the same ways on both, big and little endian hosts. Fixes: 0c8427baf0 ("hw/mips/malta: Use bootloader helper to set BAR registers") Cc: qemu-stable@nongnu.org Message-Id: <20230330152613.232082-1-thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-05-12hw/mips/malta: Fix minor dead code issuePeter Maydell1-4/+1
Coverity points out (in CID 1508390) that write_bootloader has some dead code, where we assign to 'p' and then in the following line assign to it again. This happened as a result of the refactoring in commit cd5066f8618b. Fix the dead code by removing the 'void *v' variable entirely and instead adding a cast when calling bl_setup_gt64120_jump_kernel(), as we do at its other callsite in write_bootloader_nanomips(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-03-08hw/mips: Declare all length properties as unsignedPhilippe Mathieu-Daudé1-1/+1
Some length properties are signed, other unsigned: hw/mips/cps.c:183: DEFINE_PROP_UINT32("num-vp", MIPSCPSState, num_vp, 1), hw/mips/cps.c:184: DEFINE_PROP_UINT32("num-irq", MIPSCPSState, num_irq, 256), hw/misc/mips_cmgcr.c:215: DEFINE_PROP_INT32("num-vp", MIPSGCRState, num_vps, 1), hw/misc/mips_cpc.c:167: DEFINE_PROP_UINT32("num-vp", MIPSCPCState, num_vp, 0x1), hw/misc/mips_itu.c:552: DEFINE_PROP_INT32("num-fifo", MIPSITUState, num_fifo, hw/misc/mips_itu.c:554: DEFINE_PROP_INT32("num-semaphores", MIPSITUState, Since negative values are not used (the minimum is '0'), unify by declaring all properties as unsigned. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230203113650.78146-9-philmd@linaro.org>
2023-01-13hw/isa/piix4: Decouple INTx-to-LNKx routing which is board-specificBernhard Beschow1-0/+27
pci_map_irq_fn's in general seem to be board-specific, and PIIX4's pci_slot_get_pirq() in particular seems very Malta-specific. So move the latter to malta.c to 1/ keep the board logic in one place and 2/ avoid PIIX4 to make assumptions about its board. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230109172347.1830-7-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-01-13mips: Remove support for trap and emulate KVMPaolo Bonzini1-39/+7
This support was limited to the Malta board, drop it. I do not have a machine that can run VZ KVM, so I am assuming that it works for -M malta as well. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221221091718.71844-1-philmd@linaro.org>
2023-01-13hw/mips/malta: Set PIIX4 IRQ routes in embedded bootloaderPhilippe Mathieu-Daudé1-0/+18
Linux kernel expects the northbridge & southbridge chipsets configured by the BIOS firmware. We emulate that by writing a tiny bootloader code in write_bootloader(). Upon introduction in commit 5c2b87e34d ("PIIX4 support"), the PIIX4 configuration space included values specific to the Malta board. Set the Malta-specific IRQ routing values in the embedded bootloader, so the next commit can remove the Malta specific bits from the PIIX4 PCI-ISA bridge and make it generic (matching the real hardware). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20221027204720.33611-3-philmd@linaro.org>
2023-01-13hw/mips/malta: Introduce PIIX4_PCI_DEVFN definitionPhilippe Mathieu-Daudé1-1/+3
The PIIX4 PCI-ISA bridge function is always located at 10:0. Since we want to re-use its address, add the PIIX4_PCI_DEVFN definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20221027204720.33611-2-philmd@linaro.org>
2023-01-13hw/mips/malta: Merge common BL code as bl_setup_gt64120_jump_kernel()Philippe Mathieu-Daudé1-87/+44
Merge common code shared between write_bootloader() and write_bootloader_nanomips() into bl_setup_gt64120_jump_kernel(). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-12-philmd@linaro.org>
2023-01-13hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (5/5)Philippe Mathieu-Daudé1-57/+11
Part 5/5: Convert jumping to kernel Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-11-philmd@linaro.org>
2023-01-13hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (4/5)Philippe Mathieu-Daudé1-33/+7
Part 4/5: Convert GT64120 ISD base address setup Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-10-philmd@linaro.org>
2023-01-13hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (3/5)Philippe Mathieu-Daudé1-32/+8
Part 3/5: Convert PCI0 I/O BAR setup Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-9-philmd@linaro.org>
2023-01-13hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (2/5)Philippe Mathieu-Daudé1-29/+6
Part 2/5: Convert PCI0 MEM0 BAR setup Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-8-philmd@linaro.org>
2023-01-13hw/mips/malta: Use bootloader generator API for nanoMIPS CPUs (1/5)Philippe Mathieu-Daudé1-18/+14
Similarly to how commit 0c8427baf0 ("hw/mips/malta: Use bootloader helper to set BAR registers") converted write_bootloader(), convert the equivalent write_bootloader_nanomips(), allowing us to modify the bootloader code more easily in the future. Part 1/5: Convert PCI0 MEM1 BAR setup Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-7-philmd@linaro.org>
2023-01-13hw/mips/bootloader: Handle buffers as opaque arraysPhilippe Mathieu-Daudé1-8/+11
It is irrelevant to the API what the buffers to fill are made of. In particular, some MIPS ISA have 16-bit wide instructions. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20221211204533.85359-2-philmd@linaro.org>
2023-01-13hw/mips/malta: Explicit GT64120 endianness upon device creationPhilippe Mathieu-Daudé1-1/+3
Propagate the controller endianess from the machine, setting the "cpu-little-endian" property. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221209151533.69516-6-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-13hw/mips/gt64xxx_pci: Let the GT64120 manage the lower 512MiB holePhilippe Mathieu-Daudé1-7/+0
Per the comment in the Malta board, the [0x0000.0000-0x2000.0000] range is decoded by the GT64120, so move the "empty_slot" there. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221209151533.69516-3-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-13hw/mips/malta: Trace FPGA LEDs/ASCII display updatesPhilippe Mathieu-Daudé1-0/+3
The FPGA LEDs/ASCII display is mostly used by the bootloader to show very low-level debug info. QEMU connects its output to a character device backend, which is not very practical to correlate with ASM instruction executed, interrupts or MMIO accesses. Also, the display discard the previous states. To ease bootloader debugging experience, add a pair of trace events. Such events can be analyzed over time or diff-ed between different runs. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230104133935.4639-4-philmd@linaro.org>
2023-01-13hw/mips/malta: Split FPGA LEDs/ASCII display updatesPhilippe Mathieu-Daudé1-5/+8
No need to refresh the ASCII bar when a LED is toggled (and vice versa). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230104133935.4639-3-philmd@linaro.org>
2022-10-31hw/mips/malta: Use bootloader helper to set BAR registersJiaxun Yang1-45/+40
Translate embedded assembly into IO writes which is more readable. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210127065424.114125-4-jiaxun.yang@flygoat.com> [PMD: Explode addresses/values to ease review/maintainance] Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221026191821.28167-4-philmd@linaro.org>
2022-10-31hw/mips: Use bl_gen_kernel_jump to generate bootloadersJiaxun Yang1-31/+12
Replace embedded binary with generated code. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20210127065424.114125-3-jiaxun.yang@flygoat.com> [PMD: Pass semihosting_get_argc() to bl_gen_jump_kernel()] Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221026191821.28167-3-philmd@linaro.org>
2022-10-31hw/isa/piix4: Move pci_ide_create_devs() call to board codeBernhard Beschow1-4/+6
For the VIA south bridges there was a comment to have the call in board code. Move it there for PIIX4 as well for consistency. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20221022150508.26830-29-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw/mips/malta: Reuse dev variableBernhard Beschow1-3/+2
While at it, move the assignments closer to where they are used. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221022150508.26830-26-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-10-31hw: Remove unused MAX_IDE_BUS defineBALATON Zoltan1-2/+0
Several machines have an unused MAX_IDE_BUS define. Remove it from these machines that don't need it. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220917115136.A32EF746E06@zero.eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-10-27mips/malta: pass RNG seed via env var and re-randomize on rebootJason A. Donenfeld1-0/+27
As of the kernel commit linked below, Linux ingests an RNG seed passed as part of the environment block by the bootloader or firmware. This mechanism works across all different environment block types, generically, which pass some block via the second firmware argument. On malta, this has been tested to work when passed as an argument from U-Boot's linux_env_set. As is the case on most other architectures (such as boston), when booting with `-kernel`, QEMU, acting as the bootloader, should pass the RNG seed, so that the machine has good entropy for Linux to consume. So this commit implements that quite simply by using the guest random API, which is what is used on nearly all other archs too. It also reinitializes the seed on reboot, so that it is always fresh. Link: https://git.kernel.org/torvalds/c/056a68cea01 Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com> Cc: Paul Burton <paulburton@kernel.org> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-08-08hw/mips/malta: turn off x86 specific features of PIIX4_PMIgor Mammedov1-0/+9
QEMU crashes trying to save VMSTATE when only MIPS target are compiled in $ qemu-system-mips -monitor stdio (qemu) migrate "exec:gzip -c > STATEFILE.gz" Segmentation fault (core dumped) It happens due to PIIX4_PM trying to parse hotplug vmstate structures which are valid only for x86 and not for MIPS (as it requires ACPI tables support which is not existent for ithe later) Issue was probably exposed by trying to cleanup/compile out unused ACPI bits from MIPS target (but forgetting about migration bits). Disable compiled out features using compat properties as the least risky way to deal with issue. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/995 Reviewed-by: Ani Sinha <ani@anisinha.ca> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20220728115034.1327988-1-imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: Inline and remove piix4_create()Bernhard Beschow1-1/+4
During the previous changesets piix4_create() became a trivial wrapper around more generic functions. Modernize the code. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-8-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: QOM'ify PIIX4 PM creationBernhard Beschow1-1/+4
Just like the real hardware, create the PIIX4 ACPI controller as part of the PIIX4 southbridge. This also mirrors how the IDE and USB functions are already created. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-7-shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: Factor out ISABus retrieval from piix4_create()Bernhard Beschow1-1/+2
Modernizes the code. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220603185045.143789-6-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau1-1/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06Replace TARGET_WORDS_BIGENDIANMarc-André Lureau1-12/+12
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1, and thus should always be defined to prevent misuse. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Suggested-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-22Replace GCC_FMT_ATTR with G_GNUC_PRINTFMarc-André Lureau1-1/+1
One less qemu-specific macro. It also helps to make some headers/units only depend on glib, and thus moved in standalone projects eventually. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
2022-03-08hw/mips/gt64xxx_pci: Resolve gt64120_register()Bernhard Beschow1-1/+2
Now that gt64120_register() lost its pic parameter, there is an opportunity to remove it. gt64120_register() is old style by wrapping qdev API, and the new style is to use qdev directly. So take the opportunity and modernize the code. Suggested-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20220217101924.15347-8-shentey@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08malta: Move PCI interrupt handling from gt64xxx_pci to piix4Bernhard Beschow1-5/+1
Handling PCI interrupts in piix4 increases cohesion and reduces differences between piix4 and piix3. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220217101924.15347-3-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-08-26arch_init.h: Don't include arch_init.h unnecessarilyPeter Maydell1-1/+0
arch_init.h only defines the QEMU_ARCH_* enumeration and the arch_type global. Don't include it in files that don't use those. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210730105947.28215-8-peter.maydell@linaro.org
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth1-1/+0
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include cpu.h if it's not really necessaryThomas Huth1-1/+0
Stop including cpu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-4-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include sysemu/sysemu.h if it's not really necessaryThomas Huth1-1/+0
Stop including sysemu/sysemu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-2-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-10semihosting: Move include/hw/semihosting/ -> include/semihosting/Philippe Mathieu-Daudé1-1/+1
We want to move the semihosting code out of hw/ in the next patch. This patch contains the mechanical steps, created using: $ git mv include/hw/semihosting/ include/ $ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210226131356.3964782-2-f4bug@amsat.org> Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
2021-01-04hw/mips: Use address translation helper to handle ENVP_ADDRJiaxun Yang1-31/+31
It will signed extend vaddr properly. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201215064200.28751-4-jiaxun.yang@flygoat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-01-04hw/mips/malta: Use address translation helper to calculate bootloader_run_addrJiaxun Yang1-2/+2
So it will sign extend adresses properly. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201215064200.28751-3-jiaxun.yang@flygoat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-01-04hw/mips: Make bootloader addresses unsignedJiaxun Yang1-11/+11
Address should be unsigned anyway, otherwise it may carry calculations wrongly. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201215064200.28751-2-jiaxun.yang@flygoat.com> [PMD: Fixed typo and convert hw/mips/mipssim.c too] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-12-13hw/mips/malta: Rewrite CP0_MVPConf0 access using deposit()Philippe Mathieu-Daudé1-2/+6
PTC field has 8 bits, PVPE has 4. We plan to use the "hw/registerfields.h" API with MIPS CPU definitions (target/mips/cpu.h). Meanwhile we use magic 8 and 4. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201204222622.2743175-6-f4bug@amsat.org>
2020-12-13hw/mips/malta: Do not initialize MT registers if MT ASE absentPhilippe Mathieu-Daudé1-1/+3
Do not initialize MT-related config register if the MT ASE is not present. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201204222622.2743175-5-f4bug@amsat.org>
2020-12-13target/mips: Rename cpu_supports_FEAT() as cpu_type_supports_FEAT()Philippe Mathieu-Daudé1-2/+2
As cpu_supports_isa() / cpu_supports_cps_smp() take a 'cpu_type' name argument, rename them cpu_type_supports_FEAT(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201207215257.4004222-2-f4bug@amsat.org>
2020-12-10vl: extract softmmu/datadir.cPaolo Bonzini1-0/+1
Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10mips: do not use ram_size globalPaolo Bonzini1-1/+1
Use the machine properties or loader parameters instead. Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10mips: remove bios_namePaolo Bonzini1-3/+3
Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20201026143028.3034018-9-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-17hw/mips: Remove exit(1) in case of missing ROMPavel Dovgalyuk1-7/+4
This patch updates MIPS-based machines to allow starting them without ROM. In this case CPU starts to execute instructions from the empty memory, but QEMU allows introspecting the machine configuration. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <159531210571.24117.231100997794891819.stgit@pasha-ThinkPad-X280> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-10-17hw/mips: Simplify code using ROUND_UP(INITRD_PAGE_SIZE)Philippe Mathieu-Daudé1-3/+3
Instead of using a INITRD_PAGE_MASK definition, use the simpler INITRD_PAGE_SIZE one which allows us to simplify the code by using directly the self-explicit ROUND_UP() macro. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200927163943.614604-3-f4bug@amsat.org>
2020-10-17hw/mips/malta: Use clearer qdev stylePhilippe Mathieu-Daudé1-4/+4
In order to be consistent with the other code base uses, rewrite slightly how the MIPS_MALTA object is created. No logical change. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20201012160503.3472140-3-f4bug@amsat.org>
generated by cgit v1.1 at 2025-08-04 02:51:33 +0000