aboutsummaryrefslogtreecommitdiff
path: root/hw/isa
AgeCommit message (Collapse)AuthorFilesLines
2022-06-29hw/i386/xen/xen-hvm: Inline xen_piix_pci_write_config_client() and remove itBernhard Beschow1-1/+14
xen_piix_pci_write_config_client() is implemented in the xen sub tree and uses PIIX constants internally, thus creating a direct dependency on PIIX. Now that xen_set_pci_link_route() is stubbable, the logic of xen_piix_pci_write_config_client() can be moved to PIIX which resolves the dependency. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Message-Id: <20220626094656.15673-3-shentey@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-06-11hw/isa/piix3: Inline and remove piix3_create()Bernhard Beschow1-13/+0
During the previous changesets piix3_create() became a trivial wrapper around more generic functions. Modernize the code. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-12-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix3: Factor out ISABus retrieval from piix3_create()Bernhard Beschow1-2/+1
Modernizes the code. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-11-shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix3: QOM'ify PCI device creation and wiringBernhard Beschow1-22/+45
PCI interrupt wiring was performed in create() functions which are obsolete. Move these tasks into QOM functions to modernize the code. In order to avoid duplicate checking for xen_enabled() the realize methods are now split. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-10-shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix3: Move pci_map_irq_fn near pci_set_irq_fnBernhard Beschow1-11/+11
The pci_map_irq_fn was implemented below type_init() which made it inaccessible to QOM functions. So move it up. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220603185045.143789-9-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: Inline and remove piix4_create()Bernhard Beschow1-13/+0
During the previous changesets piix4_create() became a trivial wrapper around more generic functions. Modernize the code. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-8-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: QOM'ify PIIX4 PM creationBernhard Beschow1-11/+13
Just like the real hardware, create the PIIX4 ACPI controller as part of the PIIX4 southbridge. This also mirrors how the IDE and USB functions are already created. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-7-shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: Factor out ISABus retrieval from piix4_create()Bernhard Beschow1-5/+1
Modernizes the code. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220603185045.143789-6-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: QOM'ify PCI device creation and wiringBernhard Beschow1-8/+22
PCI interrupt wiring and device creation were performed in create() functions which are obsolete. Move these tasks into QOM functions to modernize the code. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-5-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: Move pci_map_irq_fn' near pci_set_irq_fnBernhard Beschow1-25/+25
The pci_map_irq_fn was implemented below type_init() which made it inaccessible to QOM functions. So move it up. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220603185045.143789-4-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4: Use object_initialize_child() for embedded structBernhard Beschow1-1/+1
Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20220603185045.143789-3-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/southbridge/piix: Aggregate all PIIX southbridge type namesBernhard Beschow1-3/+0
TYPE_PIIX3_PCI_DEVICE resides there as already, so add the remaining ones, too. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220603185045.143789-2-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/isa/piix4.c: create PIIX4_PM device directly instead of using ↵Mark Cave-Ayland1-4/+7
piix4_pm_initfn() Now that all external logic has been removed from piix4_pm_initfn() the PIIX4_PM device can be instantiated directly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220528091934.15520-12-mark.cave-ayland@ilande.co.uk> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/acpi/piix4: use qdev gpio to wire up smi_irqMark Cave-Ayland1-1/+1
Initialize the SMI IRQ in piix4_pm_init(). The smi_irq can now be wired up directly using a qdev gpio instead of having to set the IRQ externally in piix4_pm_initfn(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220528091934.15520-10-mark.cave-ayland@ilande.co.uk> [PMD: Partially squash 20220528091934.15520-8-mark.cave-ayland@ilande.co.uk] Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/acpi/piix4: use qdev gpio to wire up sci_irqMark Cave-Ayland1-3/+3
Introduce piix4_pm_init() instance init function and use it to initialise the separate qdev gpio for the SCI IRQ. The sci_irq can now be wired up directly using a qdev gpio instead of having to set the IRQ externally in piix4_pm_initfn(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220528091934.15520-9-mark.cave-ayland@ilande.co.uk> [PMD: Partially squash 20220528091934.15520-8-mark.cave-ayland@ilande.co.uk] Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/acpi/piix4: rename piix4_pm_init() to piix4_pm_initfn()Mark Cave-Ayland1-3/+3
When QOMifying a device it is typical to use _init() as the suffix for an instance_init function, however this name is already in use by the legacy piix4_pm_init() wrapper function. Eventually the wrapper function will be removed, but for now rename it to piix4_pm_initfn() to avoid a naming collision. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220528091934.15520-7-mark.cave-ayland@ilande.co.uk> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-11hw/acpi/piix4: alter piix4_pm_init() to return PIIX4PMStateMark Cave-Ayland1-3/+5
This exposes the PIIX4_PM device to the caller to allow any qdev gpios to be mapped outside of piix4_pm_init(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220528091934.15520-6-mark.cave-ayland@ilande.co.uk> Reviewed-by: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-09acpi: q35: isa bridge: use AcpiDevAmlIf interface to build ISA device ↵Igor Mammedov1-0/+19
descriptors replaces adhoc build_isa_devices_aml() with generic AcpiDevAmlIf way to build bridge AML including all devices that are attached to its ISA bus. Later when PCI is converted to AcpiDevAmlIf, build_q35_isa_bridge() will also be dropped since PCI parts itself will take care of building device prologue/epilogue AML for each enumerated PCI device. Expected AML change is contextual, where ISA devices are moved from separately declared _SB.PCI0.ISA scope, directly under Device(ISA) node. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220608135340.3304695-21-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09acpi: pc: isa bridge: use AcpiDevAmlIf interface to build ISA device descriptorsIgor Mammedov1-0/+17
replaces ad-hoc build_isa_devices_aml() with generic AcpiDevAmlIf way to build bridge AML including all devices that are attached to its ISA bus. Later when PCI is converted to AcpiDevAmlIf, build_piix4_isa_bridge() will also be dropped since PCI parts itself will take care of building device prologue/epilogue AML for each enumerated PCI device. Expected AML change is contextual, where ISA devices are moved from separately declared _SB.PCI0.ISA scope , directly under Device(ISA) node. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220608135340.3304695-20-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09isa-bus: drop no longer used ISADeviceClass::build_amlIgor Mammedov1-11/+1
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220608135340.3304695-9-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-09acpi: make isa_build_aml() support AcpiDevAmlIf interfaceIgor Mammedov1-0/+5
To allow incremental conversion from ISADeviceClass::build_aml to AcpiDevAmlIf, add support for the later without removing the former. Once conversion is complete, another commit will drop ISADeviceClass::build_aml related code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220608135340.3304695-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-09Warn user if the vga flag is passed but no vga device is createdGautam Agrawal1-0/+1
A global boolean variable "vga_interface_created"(declared in softmmu/globals.c) has been used to track the creation of vga interface. If the vga flag is passed in the command line "default_vga"(declared in softmmu/vl.c) variable is set to 0. To warn user, the condition checks if vga_interface_created is false and default_vga is equal to 0. If "-vga none" is passed, this patch will not warn the user regarding the creation of VGA device. The warning "A -vga option was passed but this machine type does not use that option; no VGA device has been created" is logged if vga flag is passed but no vga device is created. This patch has been tested for x86_64, i386, sparc, sparc64 and arm boards. Signed-off-by: Gautam Agrawal <gautamnagrawal@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/581 Message-Id: <20220501122505.29202-1-gautamnagrawal@gmail.com> [thuth: Fix wrong warning with "-device" in some cases as reported by Paolo] Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-03-08hw/isa: Inline and remove one-line isa_init_irq()Bernhard Beschow2-8/+2
isa_init_irq() has become a trivial one-line wrapper for isa_get_irq(). It can therefore be removed. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> (tpm_tis_isa) Acked-by: Corey Minyard <cminyard@mvista.com> (isa_ipmi_bt, isa_ipmi_kcs) Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20220301220037.76555-8-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220307134353.1950-14-philippe.mathieu.daude@gmail.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com>
2022-03-08hw/isa: Drop unused attributes from ISADeviceBernhard Beschow1-13/+0
Now that the last users of ISADevice::isairq[] have been resolved during the previous commits, it can be removed for good. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220301220037.76555-7-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220307134353.1950-13-philippe.mathieu.daude@gmail.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com>
2022-03-08hw/isa/isa-bus: Remove isabus_dev_print()Bernhard Beschow1-16/+0
All isabus_dev_print() did was to print up to two IRQ numbers per device. This is redundant if the IRQ numbers are present as QOM properties (see e.g. the modified tests/qemu-iotests/172.out). Now that the last devices relying on isabus_dev_print() had their IRQ numbers QOM'ified, the contribution of this function ultimately became redundant. Remove it. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220301220037.76555-5-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220307134353.1950-12-philippe.mathieu.daude@gmail.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com>
2022-03-08hw/rtc/mc146818rtc: QOM'ify IRQ numberBernhard Beschow1-1/+1
Exposing the IRQ number as a QOM property not only allows it to be configurable but also to be displayed in HMP: Before: (qemu) info qtree ... dev: mc146818rtc, id "" gpio-out "" 1 base_year = 0 (0x0) lost_tick_policy = "discard" After: dev: mc146818rtc, id "" gpio-out "" 1 base_year = 0 (0x0) irq = 8 (0x8) lost_tick_policy = "discard" The reason the IRQ number didn's show up before is that this device does not call isa_init_irq(). Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220301220037.76555-2-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220307134353.1950-9-philippe.mathieu.daude@gmail.com> Reviewed-by: Bernhard Beschow <shentey@gmail.com>
2022-03-08hw/isa/piix4: Replace some magic IRQ constantsBernhard Beschow1-3/+3
This is a follow-up on patch "malta: Move PCI interrupt handling from gt64xxx_pci to piix4". gt64xxx_pci used magic constants, and probably didn't want to use piix4-specific constants. Now that the interrupt handing resides in piix4, its constants can be used. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20220217101924.15347-7-shentey@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08hw/isa/piix4: Resolve global instance variableBernhard Beschow1-7/+3
Now that piix4_set_irq's opaque parameter references own PIIX4State, piix4_dev becomes redundant. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20220217101924.15347-6-shentey@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08hw/isa/piix4: Pass PIIX4State as opaque parameter for piix4_set_irq()Bernhard Beschow1-3/+3
Passing PIIX4State rather than just the qemu_irq allows for resolving the global piix4_dev variable. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20220217101924.15347-5-shentey@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08hw/isa/piix4: Resolve redundant i8259[] attributeBernhard Beschow1-6/+1
This is a follow-up on patch "malta: Move PCI interrupt handling from gt64xxx_pci to piix4" where i8259[] was moved from MaltaState to PIIX4State to make the code movement more obvious. However, i8259[] seems redundant to *isa, so remove it. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20220217101924.15347-4-shentey@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-03-08malta: Move PCI interrupt handling from gt64xxx_pci to piix4Bernhard Beschow1-0/+55
Handling PCI interrupts in piix4 increases cohesion and reduces differences between piix4 and piix3. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220217101924.15347-3-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-10-18vt82c686: Add a method to VIA_ISA to raise ISA interruptsBALATON Zoltan1-1/+9
Other functions in the VT82xx chips need to raise ISA interrupts. Keep a reference to them in the device state and add via_isa_set_irq() to allow setting their state. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <778c04dc2c8affac060b8edf9e8d7dab3c3e04eb.1634259980.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-10-18vt82c686: Move common code to via_isa_realizeBALATON Zoltan1-38/+29
The vt82c686b_realize and vt8231_realize methods are almost identical, factor out the common parts to a via_isa_realize function to avoid code duplication. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <7cb7a16ff4daf8f48d576246255bea1fd355207c.1634259980.git.balaton@eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-09-30qbus: Rename qbus_create() to qbus_new()Peter Maydell1-1/+1
Rename the "allocate and return" qbus creation function to qbus_new(), to bring it into line with our _init vs _new convention. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Corey Minyard <cminyard@mvista.com> Message-id: 20210923121153.23754-6-peter.maydell@linaro.org
2021-09-04q35: catch invalid cpu hotplug configurationGerd Hoffmann1-0/+13
Related: https://bugzilla.redhat.com//show_bug.cgi?id=1985924 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20210812102341.3316254-1-kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-20hw/isa/vt82c686: Add missing Kconfig dependency (runtime error)Philippe Mathieu-Daudé1-0/+2
When building the Pegasos2 machine stand-alone we get: $ qemu-system-ppc -M pegasos2 -bios pegasos2.rom ERROR:qom/object.c:714:object_new_with_type: assertion failed: (type != NULL) Bail out! ERROR:qom/object.c:714:object_new_with_type: assertion failed: (type != NULL) Looking at the backtraces: Thread 1 "qemu-system-ppc" received signal SIGABRT, Aborted. (gdb) bt #0 0x00007ffff53877d5 in raise () at /lib64/libc.so.6 #1 0x00007ffff5370895 in abort () at /lib64/libc.so.6 #2 0x00007ffff6dc4b6c in g_assertion_message_expr.cold () at /lib64/libglib-2.0.so.0 #3 0x00007ffff6e229ff in g_assertion_message_expr () at /lib64/libglib-2.0.so.0 #4 0x0000555555a0c8f4 in object_new_with_type (type=0x0) at qom/object.c:714 #5 0x0000555555a0c9d5 in object_new (typename=0x555555c7afe4 "isa-pit") at qom/object.c:747 #6 0x0000555555a053b8 in qdev_new (name=0x555555c7afe4 "isa-pit") at hw/core/qdev.c:153 #7 0x00005555557cdd05 in isa_new (name=0x555555c7afe4 "isa-pit") at hw/isa/isa-bus.c:160 #8 0x00005555557cf518 in i8254_pit_init (bus=0x55555603d140, base=64, isa_irq=0, alt_irq=0x0) at include/hw/timer/i8254.h:54 #9 0x00005555557d12f9 in vt8231_realize (d=0x5555563d9770, errp=0x7fffffffcc28) at hw/isa/vt82c686.c:704 (gdb) bt #0 0x00007ffff54bd7d5 in raise () at /lib64/libc.so.6 #1 0x00007ffff54a6895 in abort () at /lib64/libc.so.6 #2 0x00005555558f7796 in object_new (typename=0x555555ad4889 "isa-parallel") at qom/object.c:749 #3 object_new (typename=type0x555555ad4889 "isa-parallel") at qom/object.c:743 #4 0x00005555558f0d46 in qdev_new (name=0x555555ad4889 "isa-parallel") at hw/core/qdev.c:153 #5 0x000055555576b669 in isa_new (name=0x555555ad4889 "isa-parallel") at hw/isa/isa-bus.c:160 #6 0x000055555576bbe8 in isa_superio_realize (dev=0x555555f15910, errp=<optimized out>) at hw/isa/isa-superio.c:54 #7 0x000055555576d5ed in via_superio_realize (d=0x555555f15910, errp=0x7fffffffcb30) at hw/isa/vt82c686.c:292 #8 0x00005555558f12c1 in device_set_realized (obj=<optimized out>, ...) at hw/core/qdev.c:761 #9 0x00005555558f5066 in property_set_bool (obj=0x555555f15910, ..., errp=0x7fffffffcbb0) at qom/object.c:2262 #10 0x00005555558f7f38 in object_property_set (obj=0x555555f15910, name=0x555555b1b1e3 "realized", ...) at qom/object.c:1407 #11 0x00005555558fb2d0 in object_property_set_qobject (obj=0x555555f15910, name=0x555555b1b1e3 "realized", ...) at qom/qom-qobject.c:28 #12 0x00005555558f8525 in object_property_set_bool (obj=0x555555f15910, name=0x555555b1b1e3 "realized", ...) at qom/object.c:1477 #13 0x00005555558f18ee in qdev_realize (dev=0x555555f15910, bus=0x55555602a610, errp=<optimized out>) at hw/core/qdev.c:389 #14 0x00005555558f197f in qdev_realize_and_unref (dev=0x555555f15910, bus=0x55555602a610, errp=<optimized out>) at hw/core/qdev.c:396 #15 0x000055555576b709 in isa_realize_and_unref (errp=<optimized out>, bus=0x55555602a610, dev=0x555555f15910) at hw/isa/isa-bus.c:179 #16 isa_create_simple (bus=0x55555602a610, name=0x555555adc33b "vt8231-superio") at hw/isa/isa-bus.c:173 #17 0x000055555576d9b7 in vt8231_realize (d=0x555556186a50, errp=<optimized out>) at hw/isa/vt82c686.c:706 The "isa-pit" type (TYPE_I8254) and "isa-parallel" are missing. Add them. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20210515173716.358295-12-philmd@redhat.com> [PMD: Added "isa-parallel" later]
2021-07-20hw/isa/vt82c686: Add missing Kconfig dependencies (build error)Philippe Mathieu-Daudé1-0/+3
The VT82C686 device model misses various dependencies: /usr/bin/ld: libcommon.fa.p/hw_isa_vt82c686.c.o: in function `vt82c686b_realize': hw/isa/vt82c686.c:622: undefined reference to `i8259_init' /usr/bin/ld: hw/isa/vt82c686.c:624: undefined reference to `i8257_dma_init' /usr/bin/ld: hw/isa/vt82c686.c:627: undefined reference to `mc146818_rtc_init' Add them. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20210515173716.358295-11-philmd@redhat.com>
2021-07-19hw/ide: Fix crash when plugging a piix3-ide device into the x-remote machineThomas Huth1-4/+10
QEMU currently crashes when the user tries to do something like: qemu-system-x86_64 -M x-remote -device piix3-ide This happens because the "isabus" variable is not initialized with the x-remote machine yet. Add a proper check for this condition and propagate the error to the caller, so we can fail there gracefully. Message-Id: <20210416125256.2039734-1-thuth@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-06-25hw/block/fdc: Extract ISA floppy controllers to fdc-isa.cPhilippe Mathieu-Daudé1-4/+4
Some machines use floppy controllers via the SysBus interface, and don't need to pull in all the ISA code. Extract the ISA specific code to a new unit: fdc-isa.c, and add a new Kconfig symbol: "FDC_ISA". This allows us to remove the FIXME from commit dd0ff8191ab ("isa: express SuperIO dependencies with Kconfig"). Reviewed-by: John Snow <jsnow@redhat.com> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210614193220.2007159-5-philmd@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-25hw/isa/Kconfig: Fix missing dependency ISA_SUPERIO -> FDCPhilippe Mathieu-Daudé1-0/+1
isa_superio_realize() calls isa_fdc_init_drives(), which is defined in hw/block/fdc.c, so ISA_SUPERIO needs to select the FDC symbol. Reported-by: John Snow <jsnow@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210614193220.2007159-2-philmd@redhat.com Fixes: c0ff3795143 ("Introduce a CONFIG_ISA_SUPERIO switch for isa-superio.c") Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella1-1/+1
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-05Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210504' ↵Peter Maydell1-80/+342
into staging ppc patch queue 2021-05-04 Here's the first ppc pull request for qemu-6.1. It has a wide variety of stuff accumulated during the 6.0 freeze. Highlights are: * Multi-phase reset cleanups for PAPR * Preliminary cleanups towards allowing !CONFIG_TCG for the ppc target * Cleanup of AIL logic and extension to POWER10 * Further improvements to handling of hot unplug failures on PAPR * Allow much larger numbers of CPU on pseries * Support for the H_SCM_HEALTH hypercall * Add support for the Pegasos II board * Substantial cleanup to hflag handling * Assorted minor fixes and cleanups # gpg: Signature made Tue 04 May 2021 06:52:39 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dg-gitlab/tags/ppc-for-6.1-20210504: (46 commits) hw/ppc/pnv_psi: Use device_cold_reset() instead of device_legacy_reset() hw/ppc/spapr_vio: Reset TCE table object with device_cold_reset() hw/intc/spapr_xive: Use device_cold_reset() instead of device_legacy_reset() target/ppc: removed VSCR from SPR registration target/ppc: Reduce the size of ppc_spr_t target/ppc: Clean up _spr_register et al target/ppc: Add POWER10 exception model target/ppc: rework AIL logic in interrupt delivery target/ppc: move opcode table logic to translate.c target/ppc: code motion from translate_init.c.inc to gdbstub.c spapr_drc.c: handle hotunplug errors in drc_unisolate_logical() spapr.h: increase FDT_MAX_SIZE spapr.c: do not use MachineClass::max_cpus to limit CPUs ppc: Rename current DAWR macros and variables target/ppc: POWER10 supports scv target/ppc: Fix POWER9 radix guest HV interrupt AIL behaviour docs/system: ppc: Add documentation for ppce500 machine roms/u-boot: Bump ppce500 u-boot to v2021.04 to fix broken pci support roms/Makefile: Update ppce500 u-boot build directory name ppc/spapr: Add support for implement support for H_SCM_HEALTH ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-05Merge remote-tracking branch ↵Peter Maydell5-6/+0
'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging Trivial patches pull request 20210503 # gpg: Signature made Mon 03 May 2021 09:34:56 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: (23 commits) hw/rx/rx-gdbsim: Do not accept invalid memory size docs: More precisely describe memory-backend-*::id's user scripts: fix generation update-binfmts templates docs/system: Document the removal of "compat" property for POWER CPUs mc146818rtc: put it into the 'misc' category Do not include exec/address-spaces.h if it's not really necessary Do not include cpu.h if it's not really necessary Do not include hw/boards.h if it's not really necessary Do not include sysemu/sysemu.h if it's not really necessary hw: Do not include qemu/log.h if it is not necessary hw: Do not include hw/irq.h if it is not necessary hw: Do not include hw/sysbus.h if it is not necessary hw: Remove superfluous includes of hw/hw.h ui: Fix memory leak in qemu_xkeymap_mapping_table() hw/usb: Constify VMStateDescription hw/display/qxl: Constify VMStateDescription hw/arm: Constify VMStateDescription vmstate: Constify some VMStateDescriptions Fix typo in CFI build documentation hw/pcmcia: Do not register PCMCIA type if not required ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-04vt82c686: Add emulation of VT8231 south bridgeBALATON Zoltan1-0/+84
Add emulation of VT8231 south bridge ISA part based on the similar VT82C686B but implemented in a separate subclass that holds the differences while reusing parts that can be shared. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <10abc9f89854e7c980b9731c33d25a2e307e9c4f.1616680239.git.balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04vt82c686: Introduce abstract TYPE_VIA_ISA and base vt82c686b_isa on itBALATON Zoltan1-31/+39
To allow reusing ISA bridge emulation for vt8231_isa move the device state of vt82c686b_isa emulation in an abstract via_isa class. This change breaks migration back compatibility but this is not an issue for Fuloong2E machine which is not versioned or migration supported. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <0cb8fc69c7aaa555589181931b881335fecd2ef3.1616680239.git.balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04vt82c686: Add VT8231_SUPERIO based on VIA_SUPERIOBALATON Zoltan1-0/+102
The VT8231 south bridge is very similar to VT82C686B but there are some differences in register addresses and functionality, e.g. the VT8231 only has one serial port. This commit adds VT8231_SUPERIO subclass based on the abstract VIA_SUPERIO class to emulate the superio part of VT8231. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <8108809321f9ecf3fb1aea22ddaeccc7c3a57c8e.1616680239.git.balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-04vt82c686: QOM-ify superio related functionalityBALATON Zoltan1-64/+132
Collect superio functionality and its controlling config registers handling in an abstract VIA_SUPERIO class that is a subclass of ISA_SUPERIO and put vt82c686b specific parts in a subclass of this abstract class. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <fbcc8cc8baf83f327612a1ef1c14bcbcdb0e7edb.1616680239.git.balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth2-2/+0
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include sysemu/sysemu.h if it's not really necessaryThomas Huth2-2/+0
Stop including sysemu/sysemu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-2-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Do not include hw/sysbus.h if it is not necessaryThomas Huth2-2/+0
Many files include hw/sysbus.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210327082804.2259480-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
generated by cgit v1.1 at 2024-12-30 20:32:16 +0000