aboutsummaryrefslogtreecommitdiff
path: root/hw/ipmi
AgeCommit message (Collapse)AuthorFilesLines
2018-08-23ipmi: Use proper struct reference for BT vmstateCorey Minyard1-13/+55
The vmstate for isa_ipmi_bt was referencing into the bt structure, instead create a bt structure separate and use that. The version 1 of the BT transfer was fairly broken, if a migration occured during an IPMI operation, it is likely the migration would be corrupted because I misunderstood the VMSTATE_VBUFFER_UINT32() handling, I thought it handled transferring the length field, too. So I just remove support for that. I doubt anyone is using it at this point. This also removes the transfer of use_irq, since that should come from configuration. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1534798644-13587-1-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-12object: fix OBJ_PROP_LINK_UNREF_ON_RELEASE ambivalenceMarc-André Lureau1-1/+1
A link property can be set during creation, with object_property_add_link() and later with object_property_set_link(). add_link() doesn't add a reference to the target object, while set_link() does. Furthemore, OBJ_PROP_LINK_UNREF_ON_RELEASE flags, set during add_link, says whether a reference must be released when the property is destroyed. This can lead to leaks if the property was later set_link(), as the added reference is never released. Instead, rename OBJ_PROP_LINK_UNREF_ON_RELEASE to OBJ_PROP_LINK_STRONG and use that has an indication on how the link handle reference management in set_link(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20180531195119.22021-3-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-01ipmi: Use proper struct reference for KCS vmstateCorey Minyard1-15/+66
The vmstate for isa_ipmi_kcs was referencing into the kcs structure, instead create a kcs structure separate and use that. There were also some issues in the state transfer. The inlen field was not being transferred, so if a transaction was in process during the transfer it would be messed up. And the use_irq field was transferred, but that should come from the configuration. To fix this, the new VMS_VSTRUCT macros are used so the exact version of the structure can be specified, depending on what version was being received. So an upgrade should work for KCS. Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1524670052-28373-3-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-02qapi: Empty out qapi-schema.jsonMarkus Armbruster1-1/+1
The previous commit improved compile time by including less of the generated QAPI headers. This is impossible for stuff defined directly in qapi-schema.json, because that ends up in headers that that pull in everything. Move everything but include directives from qapi-schema.json to new sub-module qapi/misc.json, then include just the "misc" shard where possible. It's possible everywhere, except: * monitor.c needs qmp-command.h to get qmp_init_marshal() * monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need qapi-event.h to get enum QAPIEvent Perhaps we'll get rid of those some other day. Adding a type to qapi/migration.json now recompiles some 120 instead of 2300 out of 5100 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-25-armbru@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster1-0/+1
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-01-30ipmi: Allow BMC device properties to be setCorey Minyard1-7/+14
Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-01-30ipmi: disable IRQ and ATN on an external disconnectCorey Minyard1-0/+5
Otherwise there's no way to clear them without an external command, and it could lock the OS in the VM if they were stuck. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-01-30ipmi: Fix macro issuesCorey Minyard1-6/+6
Macro parameters should almost always have () around them when used. llvm reported an error on this. Remove redundant parenthesis and put parenthesis around the entire macros with assignments in case they are used in an expression. The macros were doing ((v) & 1) for a binary input, but that only works if v == 0 or if v & 1. Changed to !!(v) so they work for all values. Remove some unused macros. Reported in https://bugs.launchpad.net/bugs/1651167 An audit of these changes found no semantic changes; this is just cleanups for proper style and to avoid a compiler warning. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2018-01-30ipmi: Add the platform event message commandCorey Minyard1-0/+24
This lets an event be added to the SEL as if a sensor had generated it. The OpenIPMI driver uses it for storing panic event information. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
2018-01-30ipmi: Don't set the timestamp on add events that don't have itCorey Minyard1-2/+7
According to the spec, from section "32.3 OEM SEL Record - Type E0h-FFh", event types from 0x0e to 0xff do not have a timestamp. So don't set it when adding those types. This required putting the timestamp in a temporary buffer, since it's still required to set the last addition time. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
2018-01-30ipmi: Fix SEL get/set time commandsCorey Minyard1-2/+2
The minimum message size was on the wrong commands, for getting the time it's zero and for setting the time it's 6. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-01-22hw/ipmi: Replace fprintf(stderr, "*\n" with error_report()Alistair Francis1-2/+3
Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2017-12-18hw/ipmi: remove old i386 dependencyPhilippe Mathieu-Daudé2-2/+0
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Corey Minyard <cminyard@mvista.com> Tested-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-07-14qom: enforce readonly nature of link's check callbackIgor Mammedov1-1/+1
link's check callback is supposed to verify/permit setting it, however currently nothing restricts it from misusing it and modifying target object from within. Make sure that readonly semantics are checked by compiler to prevent callback's misuse. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170714021509.23681-2-famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14char: avoid chardevice direct accessAnton Nefedov1-1/+1
frontends should avoid accessing CharDriver struct where possible Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1499342940-56739-6-git-send-email-anton.nefedov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14char: add backend hotswap handlerAnton Nefedov1-1/+1
Frontends should have an interface to setup the handler of a backend change. The interface will be used in the next commits Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-02char: move CharBackend handling in char-fe unitMarc-André Lureau1-1/+1
Move all the frontend struct and methods to a seperate unit. This avoids accidentally mixing backend and frontend calls, and helps with readabilty. Make qemu_chr_replay() a macro shared by both char and char-fe. Export qemu_chr_write(), and use a macro for qemu_chr_write_all() (nb: yes, CharBackend is for char frontend :) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02chardev: move headers to include/chardevMarc-André Lureau1-1/+1
So they are all in one place. The following patch will move serial & parallel declarations to the respective headers. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-05-23shutdown: Add source information to SHUTDOWN and RESETEric Blake1-2/+2
Time to wire up all the call sites that request a shutdown or reset to use the enum added in the previous patch. It would have been less churn to keep the common case with no arguments as meaning guest-triggered, and only modified the host-triggered code paths, via a wrapper function, but then we'd still have to audit that I didn't miss any host-triggered spots; changing the signature forces us to double-check that I correctly categorized all callers. Since command line options can change whether a guest reset request causes an actual reset vs. a shutdown, it's easy to also add the information to reset requests. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts] Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part] Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts] Message-Id: <20170515214114.15442-5-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-26ipmi: introduce an ipmi_bmc_gen_event() APICédric Le Goater1-0/+24
It will be used to fill the message buffer with custom events expected by some systems. Typically, an Open PowerNV platform guest is notified with an OEM SEL message before a shutdown or a reboot. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26ipmi: introduce an ipmi_bmc_sdr_find() APICédric Le Goater1-0/+16
This patch exposes a new IPMI routine to query a sdr entry from the sdr table maintained by the IPMI BMC simulator. The API is very similar to the internal sdr_find_entry() routine and should be used the same way to query one or all sdrs. A typical use would be to loop on the sdrs to build nodes of a device tree. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26ipmi: provide support for FRUsCédric Le Goater1-0/+133
This patch provides a simple FRU support for the BMC simulator. FRUs are loaded from a file which name is specified in the object properties, each entry having a fixed size, also specified in the properties. If the file is unknown or not accessible for some reason, a unique entry of 1024 bytes is created as a default. Just enough to start some simulation. These commands complies with the IPMI spec : "34. FRU Inventory Device Commands". Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Corey Minyard <cminyard@mvista.com> [dwg: Folded in subsequent fix to handle NULL filename] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-26ipmi: use a file to load SDRsCédric Le Goater1-2/+21
The IPMI BMC simulator populates the sdr/sensor tables with a minimal set of entries (Watchdog). But some qemu platforms might want to use extra entries for their custom needs. This patch modifies slighty the initializing routine to take into account a larger set read from a file. The name of the file to use is defined through a new 'sdr' property of the simulator device. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-04-02ipmi: Fix macro issuesCorey Minyard1-22/+12
Macro parameters should almost always have () around them when used. llvm reported an error on this. Remove redundant parenthesis and put parenthesis around the entire macros with assignments in case they are used in an expression. Remove some unused macros. Reported in https://bugs.launchpad.net/bugs/1651167 Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1490894892-8055-1-git-send-email-minyard@acm.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-02-13migration: consolidate VMStateField.startHalil Pasic1-4/+2
The member VMStateField.start is used for two things, partial data migration for VBUFFER data (basically provide migration for a sub-buffer) and for locating next in QTAILQ. The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC is used. This however goes unnoticed because actually partial migration for VBUFFER is not used at all. Let's consolidate the usage of VMStateField.start by removing support for partial migration for VBUFFER. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2016-11-18ipmi: fix qemu crash while migrating with ipmiZhuangYanying1-4/+2
Qemu crash in the source side while migrating, after starting ipmi service inside vm. ./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m 4096 \ -drive file=/work/suse/suse11_sp3_64_vt,format=raw,if=none,id=drive-virtio-disk0,cache=none \ -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0 \ -vnc :99 -monitor vc -device ipmi-bmc-sim,id=bmc0 -device isa-ipmi-kcs,bmc=bmc0,ioport=0xca2 Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7ffec4268700 (LWP 7657)] __memcpy_ssse3_back () at ../sysdeps/x86_64/multiarch/memcpy-ssse3-back.S:2757 (gdb) bt #0 __memcpy_ssse3_back () at ../sysdeps/x86_64/multiarch/memcpy-ssse3-back.S:2757 #1 0x00005555559ef775 in memcpy (__len=3, __src=0xc1421c, __dest=<optimized out>) at /usr/include/bits/string3.h:51 #2 qemu_put_buffer (f=0x555557a97690, buf=0xc1421c <Address 0xc1421c out of bounds>, size=3) at migration/qemu-file.c:346 #3 0x00005555559eef66 in vmstate_save_state (f=f@entry=0x555557a97690, vmsd=0x555555f8a5a0 <vmstate_ISAIPMIKCSDevice>, opaque=0x555557231160, vmdesc=vmdesc@entry=0x55555798cc40) at migration/vmstate.c:333 #4 0x00005555557cfe45 in vmstate_save (f=f@entry=0x555557a97690, se=se@entry=0x555557231de0, vmdesc=vmdesc@entry=0x55555798cc40) at /mnt/sdb/zyy/qemu/migration/savevm.c:720 #5 0x00005555557d2be7 in qemu_savevm_state_complete_precopy (f=0x555557a97690, iterable_only=iterable_only@entry=false) at /mnt/sdb/zyy/qemu/migration/savevm.c:1128 #6 0x00005555559ea102 in migration_completion (start_time=<synthetic pointer>, old_vm_running=<synthetic pointer>, current_active_state=<optimized out>, s=0x5555560eaa80 <current_migration.44078>) at migration/migration.c:1707 #7 migration_thread (opaque=0x5555560eaa80 <current_migration.44078>) at migration/migration.c:1855 #8 0x00007ffff3900dc5 in start_thread (arg=0x7ffec4268700) at pthread_create.c:308 #9 0x00007fffefc6c71d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113 Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01ipmi: Add graceful shutdown handling to the external BMCCorey Minyard1-3/+8
I misunderstood the workings of the power settings, the power off is a force off operation and there needs to be a separate graceful shutdown operation. So replace the force off operation with a graceful shutdown. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01ipmi: fix build config variable name for ipmi_bmc_extern.oDaniel P. Berrange1-1/+1
The original commit: commit 67aa56fc03bea44ccf384ea400515a8a58844a50 Author: Corey Minyard <cminyard@mvista.com> Date: Thu Dec 17 12:50:06 2015 -0600 ipmi: Add an external connection simulation interface defined a new variable CONFIG_IPMI_EXTERN, but then went on to mistakely use the pre-existing CONFIG_IPMI_LOCAL variable. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01ipmi: Implement shutdown via ACPI overtempCorey Minyard1-1/+7
This is allowed by the IPMI specification for graceful shutdown, so implement it. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01ipmi: chassis poweroff should use qemu_system_shutdown_request()Cédric Le Goater1-1/+1
When issuing a chassis 'powerdown' control command, the routine qemu_system_shutdown_request() should be used to exit the guest. qemu_system_powerdown_request() will initiate a soft shutdown which is not what is required by the IPMI (28.3 Chassis Control Command): 0h = power down. Force system into soft off (S4/S45) state. This is for 'emergency' management power down actions. The command does not initiate a clean shut-down of the operating system prior to powering down the system Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01ipmi_bmc_sim: Remove an unnecessary mutexCorey Minyard1-6/+0
Get rid of the unnecessary mutex, it was a vestige of something else that was not done. That way we don't have to free it. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-01ipmi: Remove hotplug from IPMI BMCsCorey Minyard2-0/+2
No hotplug support, make sure it doesn't happen. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-24char: remove explicit_fe_open, use a set_handlers argumentMarc-André Lureau1-1/+1
No need to keep explicit_fe_open around if it affects only a qemu_chr_fe_set_handlers(). Use an additional argument instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: use qemu_chr_fe* functions with CharBackend argumentMarc-André Lureau1-3/+4
This also switches from qemu_chr_add_handlers() to qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now takes the focus when fe_open (qemu_chr_add_handlers() did take the focus) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24char: replace PROP_CHR with CharBackendMarc-André Lureau1-4/+4
Store the property in a CharBackend instead of CharDriverState*. This also replace systematically chr by chr.chr to access the CharDriverState*. The following patches will replace it with calls to qemu_chr_fe CharBackend functions. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-23vl: Switch qemu_uuid to QemuUUIDFam Zheng1-1/+1
Update all qemu_uuid users as well, especially get rid of the duplicated low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API. Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to QemuUUID is done here too to keep everything in sync and avoid code churn. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
2016-09-13ipmi: check return of qemu_chr_fe_write() for errorsDaniel P. Berrange1-2/+6
The continue_send() method in ipmi_bmc_extern.c directly assigns the return value of qemu_chr_fe_write() to the variable tracking the I/O buffer offset. This ignores the possibility that the return value could be -1 and so will cause I/O go backwards on EAGAIN. Fortunately 'outpos' is unsigned, so can't go negative - it will become MAX_INT which will cause the loop to stop, and avoid an accidental out of bounds array access. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473170165-540-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-08ipmi: free extern timerMarc-André Lureau1-0/+9
Free the timer allocated during instance init. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Corey Minyard <cminyard@mvista.com>
2016-06-07hw/ipmi: fix spellingMichael Tokarev1-1/+1
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Acked-by: Corey Minyard <cminyard@mvista.com>
2016-06-07ipmi: rework the fwinfo to be fetched from the interfaceCorey Minyard3-77/+70
Instead of scanning IPMI devices from a fwinfo list, allow the fwinfo to be fetched from the IPMI interface class. Then the code looking for IPMI fwinfo can scan devices on a bus and look for ones that implement the IPMI class. This will let the ACPI scope be defined by the calling code so the IPMI code doesn't have to know the scope. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster3-0/+3
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-11ipmi: add some local variables in ipmi_sdr_initCédric Le Goater1-5/+10
This patch adds a couple of variables to manipulate the raw sdr entries. The const attribute is also removed on init_sdrs. This will ease the introduction of a sdr loader using a file. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ipmi: remove the need of an ending record in the SDR tableCédric Le Goater1-10/+3
Currently, the code initializing the sdr table relies on an ending record with a recid of 0xffff. This patch changes the loop to use the sdr size as a breaking condition. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ipmi: use a function to initialize the SDR tableCédric Le Goater1-21/+28
This patch moves the code section initializing the sdrs in its own routine to prepare ground for changes in the subsequent patches. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ipmi: add a realize function to the device classCédric Le Goater1-3/+4
This will be useful to define and use properties when the object is instantiated. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ipmi: add rsp_buffer_set_error() helperCédric Le Goater1-55/+60
The third byte in the response buffer of an IPMI command holds the error code. In many IPMI command handlers, this byte is updated directly. This patch adds a helper routine to clarify why this byte is being used. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ipmi: remove IPMI_CHECK_RESERVATION() macroCédric Le Goater1-14/+19
Some IPMI command handlers in the BMC simulator use a macro IPMI_CHECK_RESERVATION() to check a SDR reservation but the macro implicitly uses local variables. This patch simply removes it. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ipmi: replace IPMI_ADD_RSP_DATA() macro with inline helpersCédric Le Goater1-253/+228
The IPMI command handlers in the BMC simulator use a macro IPMI_ADD_RSP_DATA() to push bytes in a response buffer. The macro hides the fact that it implicitly uses variables local to the handler, which is misleading. This patch introduces a simple 'struct RspBuffer' and inlined helper routines to store byte(s) in a response buffer. rsp_buffer_push() replaces the macro IPMI_ADD_RSP_DATA() and rsp_buffer_pushmore() is new helper to push multiple bytes. The latest is used in the command handlers get_msg() and get_sdr() which are manipulating the buffer directly. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11ipmi: remove IPMI_CHECK_CMD_LEN() macroCédric Le Goater1-80/+84
Most IPMI command handlers in the BMC simulator start with a call to the macro IPMI_CHECK_CMD_LEN() which verifies that a minimal number of arguments expected by the command are indeed available. To achieve this task, the macro implicitly uses local variables which is misleading in the code. This patch adds a 'cmd_len_min' attribute to the struct IPMICmdHandler defining the minimal number of arguments expected by the command and moves this check in the global command handler ipmi_sim_handle_command(). To clarify the checks being done on the received command, the patch introduces a helper ipmi_get_handler(). Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-16ipmi: sensor number should not exceed MAX_SENSORSCédric Le Goater1-8/+8
Fix a number of off-by-ones, one of them spotted by Coverity. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-11-03 00:15:16 +0000