aboutsummaryrefslogtreecommitdiff
path: root/hw/intc
AgeCommit message (Collapse)AuthorFilesLines
2016-12-27hw/intc/arm_gicv3: Don't signal Pending+Active interrupts to CPUPeter Maydell1-0/+5
The GICv3 requires that we only signal Pending interrupts to the CPU. This category does not include Pending+Active interrupts, which means we need to check whether the interrupt is Active in the gicr_int_pending() and gicd_int_pending() functions. Interrupts are rarely in the Active+Pending state, but KVM uses this as part of its handling of the virtual timer, so this bug was causing KVM to go into an infinite loop of taking the vtimer interrupt when the guest first triggered it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-12-27hw/intc/arm_gicv3: Remove incorrect usage of fieldoffsetPeter Maydell1-7/+6
In the ARMCPRegInfo definitions for the GICv3 CPU interface registers, we were trying to use .fieldoffset to specify the locations of data fields within the GICv3CPUState struct. This is completely broken, because .fieldoffset is for offsets into the CPUARMState struct. We didn't notice because we were only using this for reads to BPR0, AP0R<n>, IGRPEN0 and CTLR_EL3, and Linux doesn't use these registers. Replace the .fieldoffset uses with explicit read functions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-12-27hw/intc/arm_gicv3_common: fix aff3 in typerAndrew Jones1-1/+2
Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20161209143703.29457-1-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-20Move target-* CPU file into a target/ folderThomas Huth1-1/+1
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: Thomas Huth <thuth@redhat.com>
2016-11-07nvic: set pending status for not active interruptsMarcin Krzeminski1-2/+20
According to ARM DUI 0552A 4.2.10. NVIC set pending status also for disabled interrupts. Correct the logic for when interrupts are marked pending both on input level transition and when interrupts are dismissed, to match the NVIC behaviour rather than the 11MPCore GIC. Signed-off-by: Marcin Krzeminski <marcin.krzeminski@nokia.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-28pseries: Move construction of /interrupt-controller fdt nodeDavid Gibson1-0/+22
Currently the device tree node for the XICS interrupt controller is in spapr_create_fdt_skel(). As part of consolidating device tree construction to reset time, this moves it to a function called from spapr_build_fdt(). In addition we move the actual code into hw/intc/xics_spapr.c with the rest of the PAPR specific interrupt controller code. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-10-28ppc/xics: change the icp_ routines API to use an 'ICPState *' argumentCédric Le Goater2-22/+21
The routines : void icp_set_cppr(ICPState *icp, uint8_t cppr); void icp_set_mfrr(ICPState *icp, uint8_t mfrr); void icp_eoi(ICPState *icp, uint32_t xirr); now use one 'ICPState *icp' argument instead of a 'XICSState *' and a server arguments. The backlink on XICSState* is used whenever needed. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28ppc/xics: add a XICSState backlink in ICPStateCédric Le Goater1-0/+1
The link will be used to change the API of the icp_* routines which are still using an XICSState as an argument. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28ppc/xics: add a xics_set_nr_servers common routineCédric Le Goater3-27/+23
xics_spapr and xics_kvm nearly define the same 'set_nr_servers' handler. Only the type of the ICP differs. So let's make a common one to remove some duplicated code. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28ppc/xics: Add xics to the monitor "info pic" commandBenjamin Herrenschmidt1-0/+49
Useful to debug interrupt problems. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - added a test on ->irqs as it is not necessarily allocated (PHB3_MSI) - removed static variable g_xics and replace with a loop on all children to find the xics objects. - rebased on InterruptStatsProvider interface ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-24pc: apic_common: Reset APIC ID to initial ID when switching into x2APIC modeIgor Mammedov1-0/+5
SDM: x2APIC State Transitions: State Changes From xAPIC Mode to x2APIC Mode " Any APIC ID value written to the memory-mapped local APIC ID register is not preserved " Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24pc: apic_common: Restore APIC ID to initial ID on resetIgor Mammedov1-0/+1
APIC ID should be restored to initial APIC ID state after Reset and Power-On. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-24pc: apic_common: Extend APIC ID property to 32bitIgor Mammedov1-1/+45
ACPI ID is 32 bit wide on CPUs with x2APIC support. Extend 'id' property to support it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-18Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into ↵Peter Maydell2-2/+7
staging x86 queue, 2016-10-17 # gpg: Signature made Mon 17 Oct 2016 18:51:07 BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-pull-request: (21 commits) target-i386: Don't use cpu->migratable when filtering features target-i386: Return runnability information on query-cpu-definitions target-i386: x86_cpu_load_features() function target-i386: Unset cannot_destroy_with_object_finalize_yet target-i386/kvm: cache the return value of kvm_enable_x2apic() intel_iommu: reject broken EIM intel_iommu: add OnOffAuto intr_eim as "eim" property intel_iommu: redo configuraton check in realize intel_iommu: pass whole remapped addresses to apic apic: add send_msi() to APICCommonClass apic: add global apic_get_class() target-i386: Move warning code outside x86_cpu_filter_features() qmp: Add runnability information to query-cpu-definitions target-i386: xsave: Add FP and SSE bits to x86_ext_save_areas target-i386: Register properties for feature aliases manually target-i386: Remove underscores from feat_names arrays target-i386: Make plus_features/minus_features QOM-based target-i386: Register aliases for feature names with underscores target-i386: Disable VME by default with TCG target-i386: List CPU models using subclass list ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17hw/intc/arm_gicv3: Fix ICC register tracepointsPeter Maydell2-15/+22
Fix some problems with the tracepoints for ICC register reads and writes: * tracepoints for ICC_BPR<n>, ICC_AP<n>R<x>, ICC_IGRPEN<n>, ICC_EIOR<n> were not printing the <n> that indicated whether the access was to the group 0 or 1 register * the ICC_IGREPEN1_EL3 read function was not actually calling the associated tracepoint * the ICC_BPR<n> write function was incorrectly calling the tracepoint for ICC_PMR writes Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1476294876-12340-4-git-send-email-peter.maydell@linaro.org
2016-10-17hw/intc/arm_gic_kvm: Fix build on aarch64Christopher Covington1-14/+0
Remove unused debugging code to fix native building on aarch64. Without this change, the following -Werr output inhibits make from completing. qemu/hw/intc/arm_gic_kvm.c:38:18: error: debug_gic_kvm defined but not used [-Werror=unused-const-variable=] static const int debug_gic_kvm = 0; ^~~~~~~~~~~~~ cc1: all warnings being treated as errors qemu/rules.mak:60: recipe for target 'hw/intc/arm_gic_kvm.o' failed make[1]: *** [hw/intc/arm_gic_kvm.o] Error 1 Makefile:205: recipe for target 'subdir-aarch64-softmmu' failed Signed-off-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20161011163202.19720-1-cov@codeaurora.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17apic: add send_msi() to APICCommonClassRadim Krčmář1-2/+6
The MMIO based interface to APIC doesn't work well with MSIs that have upper address bits set (remapped x2APIC MSIs). A specialized interface is a quick and dirty way to avoid the shortcoming. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-17apic: add global apic_get_class()Radim Krčmář1-0/+1
Every configuration has only up to one APIC class and we'll be extending the class with a function that can be called without an instanced object, so a direct access to the class is convenient. This patch will break compilation if some code uses apic_get_class() with CONFIG_USER_ONLY. Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-10-14ppc/xics: Split ICS into ics-base and ics classBenjamin Herrenschmidt4-81/+121
The existing implementation remains same and ics-base is introduced. The type name "ics" is retained, and all the related functions renamed as ics_simple_* This will allow different implementations for the source controllers such as the MSI support of PHB3 on Power8 which uses in-memory state tables for example. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ clg: added ICS_BASE_GET_CLASS and related fixes, based on : http://patchwork.ozlabs.org/patch/646010/ ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-14ppc/xics: Make the ICSState a listBenjamin Herrenschmidt4-75/+128
Instead of an array of fixed sized blocks, use a list, as we will need to have sources with variable number of interrupts. SPAPR only uses a single entry. Native will create more. If performance becomes an issue we can add some hashed lookup but for now this will do fine. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [ move the initialization of list to xics_common_initfn, restore xirr_owner after migration and move restoring to icp_post_load] Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> [ clg: removed the icp_post_load() changes from nikunj patchset v3: http://patchwork.ozlabs.org/patch/646008/ ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-10Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell6-105/+145
* Thread Sanitizer fixes (Alex) * Coverity fixes (David) * test-qht fixes (Emilio) * QOM interface for info irq/info pic (Hervé) * -rtc clock=rt fix (Junlian) * mux chardev fixes (Marc-André) * nicer report on death by signal (Michal) * qemu-tech TLC (Paolo) * MSI support for edu device (Peter) * qemu-nbd --offset fix (Tomáš) # gpg: Signature made Fri 07 Oct 2016 17:25:10 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (39 commits) qemu-doc: merge qemu-tech and qemu-doc qemu-tech: rewrite some parts qemu-tech: reorganize content qemu-tech: move TCG test documentation to tests/tcg/README qemu-tech: move user mode emulation features from qemu-tech qemu-tech: document lazy condition code evaluation in cpu.h qemu-tech: move text from qemu-tech to tcg/README qemu-doc: drop installation and compilation notes qemu-doc: replace introduction with the one from the internals manual qemu-tech: drop index test-qht: perform lookups under rcu_read_lock qht: fix unlock-after-free segfault upon resizing qht: simplify qht_reset_size qemu-nbd: Shrink image size by specified offset qemu_kill_report: Report PID name too util: Introduce qemu_get_pid_name char: update read handler in all cases char: use a fixed idx for child muxed chr i8259: give ISA device when registering ISA ioports .travis.yml: add gcc sanitizer build ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04hw/intc/arm_gicv3_its: Implement support for in-kernel ITS emulationPavel Fedin2-0/+122
The ITS control frame is in-kernel emulated while accesses to the GITS_TRANSLATER are mediated through the KVM_SIGNAL_MSI ioctl (MSI direct MSI injection advertised by the CAP_SIGNAL_MSI capability) the kvm_gsi_direct_mapping is explicitly set to false to emphasize the difference with GICv2M. Direct mapping cannot work with ITS since the content of the MSI data is not the target interrupt ID but an eventd id. GSI routing is advertised (kvm_gsi_routing_allowed) as well as msi/irqfd signaling (kvm_msi_via_irqfd_allowed). The MSI frame (GITS_TRANSLATER) absolute GPA is computed on first kvm_its_send_msi() call. It is then passed through KVM_SIGNAL_MSI ioctl. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1474616617-366-6-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04hw/intc/arm_gicv3_its: Implement ITS base classPavel Fedin2-0/+149
This is the basic skeleton for both KVM and software-emulated ITS. Since we already prepare status structure, we also introduce complete VMState description. But, because we currently have no migratable implementations, we also set unmigratable flag. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1474616617-366-3-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04hw/intc/arm_gic(v3)_kvm: Initialize gsi routingEric Auger2-0/+25
Advertise gsi routing and set up irqchip routing entries for GIC SPIs. This is not mandated as long as MSI routing is not used (because the kernel sets a default irqchip routing table). However once MSI routing gets used (for VIRTIO-PCI vhost for example), the first call to KVM_SET_GSI_ROUTING overrides the kernel default irqchip table. If no routing entry exists for the GSI, any IRQFD signaling for this GSI will fail. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1474616617-366-2-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04i8259: give ISA device when registering ISA ioportsHervé Poussineau1-2/+3
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <1475437467-22781-1-git-send-email-hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04intc: make HMP 'info irq' and 'info pic' commands use InterruptStatsProvider ↵Hervé Poussineau3-99/+0
interface Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <1474921408-24710-6-git-send-email-hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04intc/lm32_pic: implement InterruptStatsProvider interfaceHervé Poussineau1-4/+28
We have to change the vmstate version due to changes in statistics counters. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <1474921408-24710-5-git-send-email-hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04intc/slavio_intctl: implement InterruptStatsProvider interfaceHervé Poussineau1-0/+35
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <1474921408-24710-4-git-send-email-hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04intc/i8259: implement InterruptStatsProvider interfaceHervé Poussineau1-0/+37
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <1474921408-24710-3-git-send-email-hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04intc: add an interface to gather statistics/informations on interrupt ↵Hervé Poussineau2-0/+42
controllers This interface will be used by HMP commands 'info irq' and 'info pic'. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <1474921408-24710-2-git-send-email-hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-27x86: ioapic: boost default version to 0x20Peter Xu1-1/+1
It's 2.8 now, and maybe it's time to switch IOAPIC default version to 0x20. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1474608795-23058-1-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-23ppc/xics: account correct irq statusNikunj A Dadhania1-2/+5
Fix inconsistent irq status, because of this in the trace logs, for e.g. LSI status was 0x7, i.e. XICS_STATUS_ASSERTED, XICS_STATUS_SENT and XICS_STATUS_REJECTED all set, which did not make sense. So the REJECTED would have been set in earlier interrupt cycle, and then asserted and sent in this current one. Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-15pc: apic: introduce APIC macroWanpeng Li1-11/+15
Introduce a new APIC macro to replace APIC_COMMON macro in hw/intc/apic.c in order to capture access LAPIC in qemu even if LAPIC is emulated in kvm. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Message-Id: <1473923759-13912-1-git-send-email-wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-07xics_kvm: drop extra checking of kernel_xics_fdGreg Kurz1-12/+8
We abort a few lines above if kernel_xics_fd == -1. This is only code cleanup. Signed-off-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-05s390x: wrap flic savevm calls into vmstateCornelia Huck1-19/+23
Just a simple conversion to get rid of register_savevm. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-08-12trace-events: fix first line comment in trace-eventsLaurent Vivier1-1/+1
Documentation is docs/tracing.txt instead of docs/trace-events.txt. find . -name trace-events -exec \ sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \ {} \; Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-03x86: ioapic: add support for explicit EOIPeter Xu1-1/+21
Some old Linux kernels (upstream before v4.0), or any released RHEL kernels has problem in sending APIC EOI when IR is enabled. Meanwhile, many of them only support explicit EOI for IOAPIC, which is only introduced in IOAPIC version 0x20. This patch provide a way to boost QEMU IOAPIC to version 0x20, in order for QEMU to correctly receive EOI messages. Without boosting IOAPIC version to 0x20, kernels before commit d32932d ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces") will have trouble enabling both IR and level-triggered interrupt devices (like e1000). To upgrade IOAPIC to version 0x20, we need to specify: -global ioapic.version=0x20 To be compatible with old systems, 0x11 will still be the default IOAPIC version. Here 0x11 and 0x20 are the only versions to be supported. One thing to mention: this patch only applies to emulated IOAPIC. It does not affect kernel IOAPIC behavior. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1470059959-372-1-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-03x86: ioapic: ignore level irq during processingPeter Xu1-5/+9
For level triggered interrupts, we will get Remote IRR bit cleared after guest kernel finished processing specific request. Before that, we should ignore the same interrupt from triggering again. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1469974685-4144-1-git-send-email-peterx@redhat.com> [Push new "if" up so that it covers KVM split irqchip as well. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-21Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-43/+92
pc, pci, virtio: new features, cleanups, fixes - interrupt remapping for intel iommus - a bunch of virtio cleanups - fixes all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 21 Jul 2016 18:49:30 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (57 commits) intel_iommu: avoid unnamed fields virtio: Update migration docs virtio-gpu: Wrap in vmstate virtio-gpu: Use migrate_add_blocker for virgl migration blocking virtio-input: Wrap in vmstate 9pfs: Wrap in vmstate virtio-serial: Wrap in vmstate virtio-net: Wrap in vmstate virtio-balloon: Wrap in vmstate virtio-rng: Wrap in vmstate virtio-blk: Wrap in vmstate virtio-scsi: Wrap in vmstate virtio: Migration helper function and macro virtio-serial: Remove old migration version support virtio-net: Remove old migration version support virtio-scsi: Replace HandleOutput typedef Revert "mirror: Workaround for unexpected iohandler events during completion" virtio-scsi: Call virtio_add_queue_aio virtio-blk: Call virtio_add_queue_aio virtio: Introduce virtio_add_queue_aio ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-21ioapic: register IOMMU IEC notifier for ioapicPeter Xu1-0/+31
Let IOAPIC the first consumer of x86 IOMMU IEC invalidation notifiers. This is only used for split irqchip case, when vIOMMU receives IR invalidation requests, IOAPIC will be notified to update kernel irq routes. For simplicity, we just update all IOAPIC routes, even if the invalidated entries are not IOAPIC ones. Since now we are creating IOMMUs using "-device" parameter, IOMMU device will be created after IOAPIC. We need to do the registration after machine done by leveraging machine_done notifier. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21ioapic: introduce ioapic_entry_parse() helperPeter Xu1-56/+54
Abstract IOAPIC entry parsing logic into a helper function. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21q35: ioapic: add support for emulated IOAPIC IRPeter Xu1-4/+24
This patch translates all IOAPIC interrupts into MSI ones. One pseudo ioapic address space is added to transfer the MSI message. By default, it will be system memory address space. When IR is enabled, it will be IOMMU address space. Currently, only emulated IOAPIC is supported. Idea suggested by Jan Kiszka and Rita Sinha in the following patch: https://lists.gnu.org/archive/html/qemu-devel/2016-03/msg01933.html Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-20apic: Use apic_id as apic's migration instance_idIgor Mammedov1-1/+11
instance_id is generated by last_used_id + 1 for a given device type so for QEMU with 3 CPUs instance_id for APICs is a seti of [0, 1, 2] When CPU in the middle is hot-removed and migration started APICs with instance_ids 0 and 2 are transferred in migration stream. However target starts with 2 CPUs and APICs' instance_ids are generated from scratch [0, 1] hence migration fails with error Unknown savevm section or instance 'apic' 2 Fix issue by manually registering APIC's vmsd with apic_id as instance_id, in this case instance_id on target will always match instance_id on source as apic_id is the same for a given cpu instance. Reported-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-20(kvm)apic: Add unrealize callbacksIgor Mammedov2-0/+23
Callbacks will do necessary cleanups before APIC device is deleted Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-20apic: Drop APICCommonState.idx and use APIC ID as index in local_apics[]Igor Mammedov1-9/+7
local_apics[] is sized to contain all APIC ID supported in xAPIC mode, so use APIC ID as index in it instead of constantly increasing counter idx. Fixes error "apic initialization failed" when a CPU hotplugged and unplugged more times than there are free slots in local_apics[]. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-20apic: move MAX_APICS check to 'apic' classIgor Mammedov2-8/+10
MAX_APICS is only used by child 'apic' class and not by its parent TYPE_APIC_COMMON or any other derived class. Move check into end user 'apic' class so it won't get in the way of other APIC implementations if they support more then MAX_APICS. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-07-19arm_gicv3: Add assert()s to tell Coverity that offsets are alignedPeter Maydell1-0/+4
Coverity complains that the GICR_IPRIORITYR case in gicv3_readl() can overflow an array, because it doesn't know that the offsets passed to that function must be word aligned. Add some assert()s which hopefully tell Coverity that this isn't possible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1468261372-17508-1-git-send-email-peter.maydell@linaro.org
2016-07-12Clean up decorations and whitespace around header guardsMarkus Armbruster2-2/+2
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160712' into stagingPeter Maydell2-0/+461
MIPS patches 2016-07-12 Changes: * support 10-bit ASIDs * MIPS64R6-generic renamed to I6400 * initial GIC support * implement RESET_BASE register in CM GCR # gpg: Signature made Tue 12 Jul 2016 11:49:50 BST # gpg: using RSA key 0x52118E3C0B29DA6B # gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>" # Primary key fingerprint: 8DD3 2F98 5495 9D66 35D4 4FC0 5211 8E3C 0B29 DA6B * remotes/lalrae/tags/mips-20160712: target-mips: enable 10-bit ASIDs in I6400 CPU target-mips: support CP0.Config4.AE bit target-mips: change ASID type to hold more than 8 bits target-mips: add ASID mask field and replace magic values target-mips: replace MIPS64R6-generic with the real I6400 CPU model hw/mips_cmgcr: implement RESET_BASE register in CM GCR hw/mips_cpc: make VP correctly start from the reset vector target-mips: add exception base to MIPS CPU hw/mips/cps: create GIC block inside CPS hw/mips: implement Global Interrupt Controller hw/mips: implement GIC Interval Timer Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-12hw/mips: implement Global Interrupt ControllerYongbok Kim2-0/+461
The Global Interrupt Controller (GIC) is responsible for mapping each internal and external interrupt to the correct location for servicing. The internal representation of registers is different from the specification in order to consolidate information for each GIC Interrupt Sources and Virtual Processors with same functionalities. For example SH_MAP00_VP00 registers are defined like each bit represents a VP but in this implementation the equivalent map_vp contains VP number in integer form for ease accesses. When it is being accessed via read write functions an internal data is converted back into the original format as the specification. Limitations: Level triggering only GIC CounterHi not implemented (Countbits = 32bits) DINT not implemented Local WatchDog, Fast Debug Channel, Perf Counter not implemented Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
generated by cgit v1.1 at 2024-12-29 18:39:17 +0000