aboutsummaryrefslogtreecommitdiff
path: root/hw/input
AgeCommit message (Collapse)AuthorFilesLines
2020-02-04hw/input: Do not enable CONFIG_PCKBD by defaultThomas Huth1-1/+0
The i8042 PS/2 Controller should not be enabled by default. It has to be selected by machines or chipsets (e.g. SuperIO chipsets). Message-Id: <20200115113748.24757-1-thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-02-04hw/*/Makefile.objs: Move many .o files to common-objsThomas Huth1-4/+4
We have many files that apparently do not depend on the target CPU configuration, i.e. which can be put into common-obj-y instead of obj-y. This way, the code can be shared for example between qemu-system-arm and qemu-system-aarch64, or the various big and little endian variants like qemu-system-sh4 and qemu-system-sh4eb, so that we do not have to compile the code multiple times anymore. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200130133841.10779-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-01-27hppa: add emulation of LASI PS2 controllersSven Schnelle5-0/+305
Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20191220211512.3289-5-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-27ps2: accept 'Set Key Make and Break' commandsSven Schnelle1-0/+10
HP-UX sends both the 'Set key make and break (0xfc) and 'Set all key typematic make and break' (0xfa). QEMU response with 'Resend' as it doesn't handle these commands. HP-UX than reports an PS/2 max retransmission exceeded error. Add these commands and just reply with ACK. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20191220211512.3289-4-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau5-7/+7
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-20migration: Define VMSTATE_INSTANCE_ID_ANYPeter Xu1-1/+2
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to auto-generate the vmstate instance ID. Previously it was hard coded as -1 instead of this macro. It helps to change this default value in the follow up patches. No functional change. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-07Merge remote-tracking branch 'remotes/elmarco/tags/prop-ptr-pull-request' ↵Peter Maydell1-5/+3
into staging Clean-ups: qom-ify serial and remove QDEV_PROP_PTR Hi, QDEV_PROP_PTR is marked in multiple places as "FIXME/TODO/remove me". In most cases, it can be easily replaced with QDEV_PROP_LINK when the pointer points to an Object. There are a few places where such substitution isn't possible. For those places, it seems reasonable to use a specific setter method instead, and keep the user_creatable = false. In other places, proper usage of qdev or other facilies is the solution. The serial code wasn't converted to qdev, which makes it a bit more archaic to deal with. Let's convert it first, so we can more easily embed it from other devices, and re-export some properties and drop QDEV_PROP_PTR usage. # gpg: Signature made Tue 07 Jan 2020 15:01:26 GMT # gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5 # gpg: issuer "marcandre.lureau@redhat.com" # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full] # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full] # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/prop-ptr-pull-request: (37 commits) qdev/qom: remove some TODO limitations now that PROP_PTR is gone qdev: remove QDEV_PROP_PTR qdev: remove PROP_MEMORY_REGION omap-gpio: remove PROP_PTR omap-i2c: remove PROP_PTR omap-intc: remove PROP_PTR smbus-eeprom: remove PROP_PTR cris: improve passing PIC interrupt vector to the CPU mips/cps: fix setting saar property qdev: use g_strcmp0() instead of open-coding it leon3: use qdev gpio facilities for the PIL leon3: use qemu_irq framework instead of callback as property dp8393x: replace PROP_PTR with PROP_LINK etraxfs: remove PROP_PTR usage lance: replace PROP_PTR with PROP_LINK vmmouse: replace PROP_PTR with PROP_LINK sm501: make SerialMM a child, export chardev property mips: use sysbus_mmio_get_region() instead of internal fields mips: use sysbus_add_io() mips: baudbase is 115200 by default ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-07vmmouse: replace PROP_PTR with PROP_LINKMarc-André Lureau1-5/+3
While at it, use the expected type. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-01-05virtio-input: convert to new virtio_delete_queueMichael S. Tsirkin1-2/+3
Seems cleaner than using VQ index values. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-12-17hw: replace hw/i386/pc.h with a header just for the i8259Paolo Bonzini1-1/+0
Remove the need to include i386/pc.h to get to the i8259 functions. This is enough to remove the inclusion of hw/i386/pc.h from all non-x86 files. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-11-25virtio-input: fix memory leak on unrealizeMarc-André Lureau1-0/+3
Spotted by ASAN + minor stylistic change. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20191121095649.25453-1-marcandre.lureau@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-15hw/input/lm832x: Convert reset handler to DeviceResetPhilippe Mathieu-Daudé1-7/+5
The LM8323 key-scan controller is a I2C device, it will be reset when the I2C bus it stands on is reset. Convert its reset handler into a proper Device reset method. Reviewed-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191010131527.32513-8-philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster2-2/+2
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster1-1/+0
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster6-4/+5
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster7-7/+0
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster13-0/+14
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster8-0/+9
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16Include sysemu/reset.h a lot lessMarkus Armbruster5-0/+7
In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-07-26stellaris_input: Fix vmstate description of buttons fieldPeter Maydell1-4/+6
gamepad_state::buttons is a pointer to an array of structs, not an array of structs, so should be declared in the vmstate with VMSTATE_STRUCT_VARRAY_POINTER_INT32; otherwise we corrupt memory on incoming migration. We bump the vmstate version field as the easiest way to deal with the migration break, since migration wouldn't have worked reliably before anyway. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-id: 20190725163710.11703-2-peter.maydell@linaro.org
2019-06-12Supply missing header guardsMarkus Armbruster1-0/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190604181618.19980-5-armbru@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster9-1/+12
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-05-15hw/input: Add a CONFIG_PS2 switch for the ps2.c fileThomas Huth2-1/+6
ps2.c only needs to be compiled if we are building pckbd.c or pl050.c. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190411182240.5957-1-thuth@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-13virtio-input: fix Kconfig dependency and MakefileGerd Hoffmann2-4/+2
Make VIRTIO_INPUT_HOST depend on VIRTIO_INPUT. Use CONFIG_VIRTIO_INPUT_HOST in Makefile. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20190510105137.17481-2-kraxel@redhat.com
2019-05-10Add vhost-user-input-pciMarc-André Lureau3-0/+135
Add a new virtio-input device, which connects to a vhost-user backend. Instead of reading configuration directly from an input device / evdev (like virtio-input-host), it reads it over vhost-user protocol with {SET,GET}_CONFIG messages. The vhost-user-backend handles the queues & events setup. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20190503130034.24916-5-marcandre.lureau@redhat.com [ kraxel: drop -{non-,}transitional variants ] [ kraxel: fix "make check" on !linux ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-04-29hw/devices: Move TI touchscreen declarations into a new headerPhilippe Mathieu-Daudé2-3/+3
Since uWireSlave is only used in this new header, there is no need to expose it via "qemu/typedefs.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/devices: Move Gamepad declarations into a new headerPhilippe Mathieu-Daudé1-1/+1
Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-22trace-events: Fix attribution of trace points to sourceMarkus Armbruster1-1/+1
Some trace points are attributed to the wrong source file. Happens when we neglect to update trace-events for code motion, or add events in the wrong place, or misspell the file name. Clean up with help of cleanup-trace-events.pl. Same funnies as in the previous commit, of course. Manually shorten its change to linux-user/trace-events to */signal.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 20190314180929.27722-6-armbru@redhat.com Message-Id: <20190314180929.27722-6-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster1-8/+8
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-11audio: use qapi AudioFormat instead of audfmt_eKővágó, Zoltán1-1/+1
I had to include an enum for audio sampling formats into qapi, but that meant duplicating the audfmt_e enum. This patch replaces audfmt_e and associated values with the qapi generated AudioFormat enum. This patch is mostly a search-and-replace, except for switches where the qapi generated AUDIO_FORMAT_MAX caused problems. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 01251b2758a1679c66842120b77c0fb46d7d0eaf.1552083282.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-07virtio: express virtio dependencies with KconfigYang Zhong1-1/+3
Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-42-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i2c: express dependencies with KconfigPaolo Bonzini1-0/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-38-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07isa: express dependencies with kconfigPaolo Bonzini1-0/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-36-yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: switch to KconfigPaolo Bonzini1-0/+5
The make_device_config.sh script is replaced by minikconf, which is modified to support the same command line as its predecessor. The roots of the parsing are default-configs/*.mak, Kconfig.host and hw/Kconfig. One difference with make_device_config.sh is that all symbols have to be defined in a Kconfig file, including those coming from the configure script. This is the reason for the Kconfig.host file introduced in the previous patch. Whenever a file in default-configs/*.mak used $(...) to refer to a config-host.mak symbol, this is replaced by a Kconfig dependency; this part must be done already in this patch for bisectability. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-28-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini1-0/+23
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-27i2c: have I2C receive operation return uint8_tCorey Minyard1-1/+1
It is never supposed to fail and cannot return an error, so just have it return the proper type. Have it return 0xff on nothing available, since that's what would happen on a real bus. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-14pckbd: Convert DPRINTF->traceDr. David Alan Gilbert2-13/+13
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20181016112232.23241-1-dgilbert@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-02-06hw/input/tsc210x: Fix building with no verbosityPhilippe Mathieu-Daudé1-12/+6
When building with TSC_VERBOSE not defined, we get: CC arm-softmmu/hw/input/tsc210x.o hw/input/tsc210x.c: In function ‘tsc2102_data_register_write’: hw/input/tsc210x.c:554:5: error: label at end of compound statement default: ^~~~~~~ hw/input/tsc210x.c: In function ‘tsc2102_control_register_write’: hw/input/tsc210x.c:638:5: error: label at end of compound statement bad_reg: ^~~~~~~ hw/input/tsc210x.c: In function ‘tsc2102_audio_register_write’: hw/input/tsc210x.c:766:5: error: label at end of compound statement default: ^~~~~~~ make[1]: *** [rules.mak:69: hw/input/tsc210x.o] Error 1 Fix this by replacing the culprit fprintf(stderr) calls by a more recent API: qemu_log_mask(LOG_GUEST_ERROR). Other fprintf() calls are left untouched. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20190204204517.23698-1-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-30hw: input: set category of the i8042 devicekumar sourav1-0/+1
Sets the category of i8042 device as DEVICE_CATEGORY_INPUT Devices should be assigned to one of DEVICE_CATEGORY_XXXX. Signed-off-by: kumar sourav <sourav.jb1988@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20190125151440.13794-1-sourav.jb1988@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-11avoid TABs in files that only contain a fewPaolo Bonzini3-3/+3
Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-18qmp hmp: Make system_wakeup check wake-up support and run stateDaniel Henrique Barboza1-3/+3
The qmp/hmp command 'system_wakeup' is simply a direct call to 'qemu_system_wakeup_request' from vl.c. This function verifies if runstate is SUSPENDED and if the wake up reason is valid before proceeding. However, no error or warning is thrown if any of those pre-requirements isn't met. There is no way for the caller to differentiate between a successful wakeup or an error state caused when trying to wake up a guest that wasn't suspended. This means that system_wakeup is silently failing, which can be considered a bug. Adding error handling isn't an API break in this case - applications that didn't check the result will remain broken, the ones that check it will have a chance to deal with it. Adding to that, the commit before previous created a new QMP API called query-current-machine, with a new flag called wakeup-suspend-support, that indicates if the guest has the capability of waking up from suspended state. Although such guest will never reach SUSPENDED state and erroring it out in this scenario would suffice, it is more informative for the user to differentiate between a failure because the guest isn't suspended versus a failure because the guest does not have support for wake up at all. All this considered, this patch changes qmp_system_wakeup to check if the guest is capable of waking up from suspend, and if it is suspended. After this patch, this is the output of system_wakeup in a guest that does not have wake-up from suspend support (ppc64): (qemu) system_wakeup wake-up from suspend is not supported by this guest (qemu) And this is the output of system_wakeup in a x86 guest that has the support but isn't suspended: (qemu) system_wakeup Unable to wake up: guest is not in suspended state (qemu) Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20181205194701.17836-4-danielhb413@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-13input/pl050: Convert sysbus init function to realize functionMao Zhongyi1-6/+5
Use DeviceClass rather than SysBusDeviceClass in pl050_class_init(). Cc: peter.maydell@linaro.org Cc: qemu-arm@nongnu.org Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181130093852.20739-10-maozhongyi@cmss.chinamobile.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13milkymist-softusb: Convert sysbus init function to realize functionMao Zhongyi1-9/+7
Use DeviceClass rather than SysBusDeviceClass in milkymist_softusb_class_init(). Cc: michael@walle.cc Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181130093852.20739-9-maozhongyi@cmss.chinamobile.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-27ps2kbd: default to scan enabled after resetHervé Poussineau1-1/+1
A check for scan_enabled has been added to ps2_keyboard_event in commit 143c04c7e0639e53086519592ead15d2556bfbf2 to prevent stream corruption. This works well as long as operating system is resetting keyboard, or enabling it. This fixes IBM 40p firmware, which doesn't bother sending KBD_CMD_RESET, KBD_CMD_ENABLE or KBD_CMD_RESET_ENABLE before trying to use the keyboard. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20181021190721.2148-1-hpoussin@reactos.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-02ps2: prevent changing irq state on save and loadPavel Dovgalyuk1-2/+6
Commit 2858ab09e6f708e381fc1a1cc87e747a690c4884 changed PS/2 keyboard/mouse buffers to the standard size. However, its state may change when migrating from the old buffer size and therefore irq needs updating. But this change made wrong, because it throws the whole queue if there are too much data instead of cropping it. That commit also updates irq (because the queue state may change). But updating the irq may change the VM state (and determinism of the execution). E.g., when replaying the execution, one may save the VM state and the state of the interrupt controller will be updated at the moment of saving, instead of using the recorded update events. This patch makes the queue update deterministic: it removes the update_irq call and crops the queue to prevent losing the characters and changing the required irq status. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <20180511081601.14610.39946.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-29hw/input/tsc2005: Convert a fprintf() call to trace eventsPhilippe Mathieu-Daudé2-4/+6
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-26hw/input/tsc2005: Use qemu_log_mask(GUEST_ERROR) instead of fprintfPhilippe Mathieu-Daudé1-5/+8
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20180624040609.17572-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26hw/input/pckbd: Use qemu_log_mask(GUEST_ERROR) instead of fprintfPhilippe Mathieu-Daudé1-1/+3
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20180624040609.17572-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-19Merge remote-tracking branch ↵Peter Maydell1-1/+1
'remotes/kraxel/tags/input-20180618-pull-request' into staging input: ps2 post_load fix. # gpg: Signature made Mon 18 Jun 2018 11:18:30 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/input-20180618-pull-request: ps2: check PS2Queue wptr pointer in post_load routine Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-18ps2: check PS2Queue wptr pointer in post_load routineliujunjie1-1/+1
In commit 802cbcb7300, most issues have been fixed when qemu guest migration. But the queue size still need to check whether is equal to PS2_QUEUE_SIZE. If yes, the wptr should set as 0. Or, wptr would larger than PS2_QUEUE_SIZE and never come back when ps2_queue_noirq is called. This could lead to OOB access, add check to avoid it. Signed-off-by: liujunjie <liujunjie23@huawei.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com> Message-id: 20180607080237.12360-1-liujunjie23@huawei.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.1 at 2024-12-28 05:28:42 +0000