aboutsummaryrefslogtreecommitdiff
path: root/hw/ide/pci.c
AgeCommit message (Collapse)AuthorFilesLines
2012-02-10ide: fix compilation errors when DEBUG_IDE is setHervé Poussineau1-1/+1
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-21Correct types in bmdma_addr_{read,write}David Gibson1-2/+2
Back when I made patches introducing dma_addr_t and various PCI DMA wrapper functions, I made a mistake. The bmdma_addr_{read,write} functions need to take target_phys_addr_t not dma_addr_t, since they are assigned to MemoryRegionOps callbacks. This patch corrects my error. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-12-12Remove unnecessary casts from PCI DMA code in PCI IDEDavid Gibson1-2/+2
This patch removes some unnecessary casts in the PCI IDE device, introduced by commit 552908fef5b67ad9d96b76d7cb8371ebc26c9bc8 'PCI IDE: Use PCI DMA stub functions'. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-05block: convert qemu_aio_flush() calls to bdrv_drain_all()Stefan Hajnoczi1-1/+1
Many places in QEMU call qemu_aio_flush() to complete all pending asynchronous I/O. Most of these places actually want to drain all block requests but there is no block layer API to do so. This patch introduces the bdrv_drain_all() API to wait for requests across all BlockDriverStates to complete. As a bonus we perform checks after qemu_aio_wait() to ensure that requests really have finished. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-01PCI IDE: Use PCI DMA stub functionsDavid Gibson1-9/+10
This updates the PCI IDE device emulation to use the explicit PCI DMA wrapper to initialize its scatter/gathjer structure. This means this driver should not need further changes when the sglist interface is extended to support IOMMUs. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-15Replace the VMSTOP macros with a proper state typeLuiz Capitulino1-1/+1
Today, when notifying a VM state change with vm_state_notify(), we pass a VMSTOP macro as the 'reason' argument. This is not ideal because the VMSTOP macros tell why qemu stopped and not exactly what the current VM state is. One example to demonstrate this problem is that vm_start() calls vm_state_notify() with reason=0, which turns out to be VMSTOP_USER. This commit fixes that by replacing the VMSTOP macros with a proper state type called RunState. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-09-12hw: Trim superfluous #include "block_int.h"Markus Armbruster1-1/+0
Including it in device models is unclean, including it without a reason adds insult to injury. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-08ide: convert to memory APIAvi Kivity1-11/+14
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-15ide: Clear error_status after restarting flushKevin Wolf1-7/+11
Clearing the error status flag was missing for restarting flushes. Now that the error status is separate from the BM status register, we can simply set it to 0 after restarting the request. This ensures that we never forget to clear a bit. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15ide: add TRIM supportChristoph Hellwig1-2/+7
Add support for TRIM sub function of the data set management command, and wire it up to the qemu discard infrastructure. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15ide: allow other dma comands than read and writeChristoph Hellwig1-3/+3
Replace the is_read flag with a dma_cmd flag to allow the dma and restart logic to handler other commands like TRIM. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15ide: Split error status from status registerKevin Wolf1-7/+66
When adding the werror=stop mode, some flags were added to s->status which are used to determine what kind of operation should be restarted when the VM is continued. Unfortunately, it turns out that s->status is in fact a device register and as such is visible to the guest (some of the abused bits are even writable for the guest). For migration we keep on using the old VMState field (renamed to migration_compat_status) if the status register doesn't use any of the previously abused bits. If it does, we use a subsection with a clean copy of the status register. The error status is always sent in a subsection if there is any error. It can't use the old field because errors happen even without PCI. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-05-18ide: Turn debug messages into assertionsKevin Wolf1-6/+2
These printfs aren't really debug messages, but clearly indicate a bug if they ever become effective. Noone uses DEBUG_IDE, let's re-enable the check unconditionally and make it an assertion instead of printfs in the device emulation. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-05-18ide: cleanup warningsAndrea Arcangeli1-2/+2
Add \n. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-04-15Remove unused sysemu.h include directivesBlue Swirl1-1/+0
Remove unused sysemu.h include directives to speed up build with the following patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-24ide: Remove unneeded null pointer checkStefan Weil1-3/+1
With bm == NULL, other code in the same function would crash. This bug was reported by cppcheck: hw/ide/pci.c:280: error: Possible null pointer dereference: bm Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24ide: factor dma handling helpersChristoph Hellwig1-7/+2
Factor the DMA I/O path that is duplicated between read and write commands, into common helpers using the s->is_read flag added for the macio ATA controller. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-12-17ide: Split out BMDMA code from ATA coreAlexander Graf1-3/+277
The ATA core is currently heavily intertwined with BMDMA code. Let's loosen that a bit, so we can happily replace the DMA backend with different implementations. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-29ide: Reset current_addr after stopping DMAKevin Wolf1-1/+1
Whenever SSBM is reset in the command register all state information is lost. Restarting DMA means that current_addr must be reset to the base address of the PRD table. The OS is not required to change the base address register before starting a DMA operation, it can reuse the value it wrote for an earlier request. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-11-29ide: Ignore double DMA transfer starts/stopsKevin Wolf1-28/+32
You can only start a DMA transfer if it's not running yet, and you can only cancel it if it's running. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-11-24ide: convert bmdma address ioport to ioport_register()Avi Kivity1-53/+18
cmd646, via compile tested, pci lightly boot tested. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03ide: Avoid canceling IDE DMAAndrea Arcangeli1-2/+21
The reason for not actually canceling the I/O is because with virtualization and lots of VM running, a guest fs may mistake a overload of the host, as an IDE timeout. So rather than canceling the I/O, it's safer to wait I/O completion and simulate that the I/O has completed just before the io cancellation was requested by the guest. This way if ntfs or an app writes data without checking for -EIO retval, and it thinks the write has succeeded, it's less likely to run into troubles. Similar issues for reads. Furthermore because the DMA operation is splitted into many synchronous aio_read/write if there's more than one entry in the SG table, without this patch the DMA would be cancelled in the middle, something we've no idea if it happens on real hardware too or not. Overall this seems a great risk for zero gain. This approach is sure safer than previous code given we can't pretend all guest fs code out there to check for errors and reply the DMA if it was completed partially, given a timeout would never materialize on a real harddisk unless there are defective blocks (and defective blocks are practically only an issue for reads never for writes in any recent hardware as writing to blocks is the way to fix them) or the harddisk breaks as a whole. Signed-off-by: Izik Eidus <ieidus@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-26ide: fix migration in the middle of a bmdma transferJuan Quintela1-0/+30
It reintroduces Revert "ide save/restore pio/atapi cmd transfer fields and io buffer" but using subsections. Added bonus is the addition of ide_dummy_transfer_stop to transfer_end_table, that was missing. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-26Revert "ide save/restore current transfer fields"Juan Quintela1-6/+2
This reverts commit 42ee76fe82093ba914f0dc83d2decbcf68866144. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26ide save/restore current transfer fieldsMarcelo Tosatti1-2/+6
If migration takes place between write of the bmdma address register and write of the command register (to initiate DMA), the destination will not properly start the DMA op, hanging the guest: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd c8/00:16:41:00:00/00:00:00:00:00/e0 tag 0 dma 11264 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } Fix by sending current transfer information in the migration data. We need to update ide version to 4 for this to work. As we don't have subsectios, we need to chain the update increase until vmstate_ide_pci (quintela) Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27ide: port pci ide to vmstateJuan Quintela1-59/+36
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12ide: split cmd646 and piix from pci.cJuan Quintela1-338/+0
This patch splits cmd646 specific code from pci.c. This patch splits piix4 specific code from pci.c. And compile new piix.o and cmd646.o when they are needed. The only change that is not code movemet is removal of cmd646 specific parts in bmdma_readb/writeb for piix. Patchworks-ID: 35301 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12ide: export needed ide-pci functions for splitJuan Quintela1-10/+10
Patchworks-ID: 35300 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12ide: create ide/pci.h for common ide pci definitionsJuan Quintela1-13/+1
Patchworks-ID: 35299 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12ide: Remove cast in pci_register_barJuan Quintela1-12/+6
We already have a PCIDevice at that point Patchworks-ID: 35296 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12ide: change cast to DO_UPCASTJuan Quintela1-2/+2
Patchworks-ID: 35293 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07New qdev_init_nofail()Markus Armbruster1-1/+1
Like qdev_init(), but terminate program via hw_error() instead of returning an error value. Use it instead of qdev_init() where terminating the program on failure is okay, either because it's during machine construction, or because we know that failure can't happen. Because relying in the latter is somewhat unclean, and the former is not always obvious, it would be nice to go back to qdev_init() in the not-so-obvious cases, only with proper error handling. I'm leaving that for another day, because it involves making sure that error values are properly checked by all callers. Patchworks-ID: 35168 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Rename pci_create_noinit() to pci_create()Markus Armbruster1-1/+1
It's qdev_create() specialized for PCI, so name it accordingly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05switch ide bus to inplace allocation.Gerd Hoffmann1-21/+21
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-15ide/pci: convert to qdev.Gerd Hoffmann1-69/+117
With this patch applied ide drives (when attached to a pci adapter) can be created via -device, like this: -drive if=none,id=mydisk,file=/path/to/disk.img -device ide-drive,drive=mydisk,bus=ide.0,unit=0 Note that creating a master on ide1 doesn't work that way. That is a side effect of qemu creating a cdrom automagically even if you don't ask for it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-15ide/pci: fix indentionGerd Hoffmann1-6/+6
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-04mips malta: Fix fdc regression and use qdev for i8042 setupStefan Weil1-9/+4
8baf73adf664e79eae201c3f618078a220a661d9 (qdev/isa: convert fdc) breaks MIPS Malta: Tried to create isa device isa-fdc with no isa bus present Fix this by creating an isa bus for piix4. This change also requires some more qdev related changes (similar changes were applied to pc.c) and allows cleaning of piix3/piix4 code. Thanks to Gerd Hoffmann for his hints. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04ide: pass down DriveInfo instead of BlockDriverStateGerd Hoffmann1-8/+3
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ide: move code to hw/ide/Gerd Hoffmann1-0/+523
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-11-02 18:52:03 +0000