aboutsummaryrefslogtreecommitdiff
path: root/hw/ide.h
AgeCommit message (Collapse)AuthorFilesLines
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity1-1/+1
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17ide pc: Cut out the block layer geometry middlemanMarkus Armbruster1-1/+3
PC BIOS setup needs IDE geometry information. Get it directly from the device model rather than through the block layer. In preparation of purging geometry from the block layer, which will happen later in this series. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-20isa: give ISABus/ISADevice to isa_create(), isa_bus_irqs() and isa_get_irq() ↵Hervé Poussineau1-1/+1
functions NULL is a valid bus/device, so there is no change in behaviour. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-24ide/mmio: convert to memory APIAvi Kivity1-0/+2
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-08-08ppc: convert to memory APIAvi Kivity1-1/+1
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-26xen: implement unplug protocol in xen_platformStefano Stabellini1-0/+1
The unplug protocol is necessary to support PV drivers in the guest: the drivers expect to be able to "unplug" emulated disks and nics before initializing the Xen PV interfaces. It is responsibility of the guest to make sure that the unplug is done before the emulated devices or the PV interface start to be used. We use pci_for_each_device to walk the PCI bus, identify the devices and disks that we want to disable and dynamically unplug them. Changes in v2: - use PCI_CLASS constants; - replace pci_unplug_device with qdev_unplug; - do not import hw/ide/internal.h in xen_platform.c; Changes in v3: - introduce piix3-ide-xen, that support hot-unplug; - move the unplug code to hw/ide/piix.c; - just call qdev_unplug from xen_platform.c to unplug the IDE disks; Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-07ide: consolidate drive_get(IF_IDE)Isaku Yamahata1-0/+3
factor out ide initialization to call drive_get(IF_IDE) Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31blockdev: Fix regression in -drive if=scsi,index=NMarkus Armbruster1-0/+2
Before commit 622b520f, index=12 meant bus=1,unit=5. Since the commit, it means bus=0,unit=12. The drive is created, but not the guest device. That's because the controllers we use with if=scsi drives (lsi53c895a and esp) support only 7 units, and scsi_bus_legacy_handle_cmdline() ignores drives with unit numbers exceeding that limit. Changing the mapping of index to bus, unit is a regression. Breaking -drive invocations that used to work just makes it worse. Revert the part of commit 622b520f that causes this, and clean up some. Note that the fix only affects if=scsi. You can still put more than 7 units on a SCSI bus with -device & friends. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02pc: Fix CMOS info for drives defined with -deviceMarkus Armbruster1-0/+2
Drives defined with -drive if=ide get get created along with the IDE controller, inside machine->init(). That's before cmos_init(). Drives defined with -device get created during generic device init. That's after cmos_init(). Because of that, CMOS has no information on them (type, geometry, translation). Older versions of Windows such as XP reportedly choke on that. Split off the part of CMOS initialization that needs to know about -device devices, and turn it into a reset handler, so it runs after device creation. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-07-02ide: Make PIIX and ISA IDE init functions return the qdevMarkus Armbruster1-5/+6
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-29MIPS: Initial support of VIA IDE controller used by fulong mini pcHuacai Chen1-0/+1
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori1-1/+1
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc1-1/+1
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-15ide/isa: convert to qdev.Gerd Hoffmann1-2/+2
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-04mips malta: Fix fdc regression and use qdev for i8042 setupStefan Weil1-4/+2
8baf73adf664e79eae201c3f618078a220a661d9 (qdev/isa: convert fdc) breaks MIPS Malta: Tried to create isa device isa-fdc with no isa bus present Fix this by creating an isa bus for piix4. This change also requires some more qdev related changes (similar changes were applied to pc.c) and allows cleaning of piix3/piix4 code. Thanks to Gerd Hoffmann for his hints. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04ide: pass down DriveInfo instead of BlockDriverStateGerd Hoffmann1-6/+6
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ide: split away ide-mmio.cGerd Hoffmann1-0/+5
create ide-mmio.c and place mmio support there. only build ide-mmio support for platforms using it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ide: split away ide-macio.cGerd Hoffmann1-0/+4
create ide-macio.c and place macio support there. only build ide-macio support for platforms using it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27ide: split away ide-pci.cGerd Hoffmann1-0/+8
create ide-pci.c and place pci bus support there. only build ide-pci support for platforms using it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Fix build (merge with isa mmio split)
2009-08-27ide: split away ide-isa.cGerd Hoffmann1-0/+10
create ide-isa.c and place isa bus support there. only build ide-isa support for platforms using it. also create ide.h header file. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.1 at 2024-12-26 04:22:12 +0000