aboutsummaryrefslogtreecommitdiff
path: root/hw/i386/pc_q35.c
AgeCommit message (Collapse)AuthorFilesLines
2014-06-29pc: Move q35 compat props to PC_COMPAT_*Eduardo Habkost1-5/+5
For each compat property on PC_Q35_COMPAT_*, there are only two possibilities: * If the device is never instantiated when using a machine other than pc-q35, then the compat property can be safely added to PC_COMPAT_*; * If the device can be instantiated when using a machine other than pc-q35, that means the other machines also need the compat property to be set. That means we don't need separate PC_Q35_COMPAT_* macros at all, today. The hpet.hpet-intcap case is interesting: piix and q35 do have something that emulates different defaults, but the machine-specific default is applied _after_ compat_props are applied, by simply checking if the property is zero (which is the real default on the hpet code). The hpet.hpet-intcap=0x4 compat property can (should?) be applied to piix too, because 0x4 was the default on both piix and q35 before the hpet-intcap property was introduced. Now, if one day we change the default HPET intcap on one of the PC machine-types again, we may want to introduce PC_{Q35,I440FX}_COMPAT macros. But while we don't need that, we can keep the code simple. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Cc: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23pc & q35: Add new machine opt max-ram-below-4gDon Slutz1-1/+21
This is a pc & q35 only machine opt. If you add enough PCI devices then all mmio for them will not fit below 4G which may not be the layout the user wanted. This allows you to increase the below 4G address space that PCI devices can use (aka decrease ram below 4G) and therefore in more cases not have any mmio that is above 4G. For example using "-machine pc,max-ram-below-4g=2G" on the command line will limit the amount of ram that is below 4G to 2G. Note: this machine option cannot be used to increase the amount of ram below 4G. Signed-off-by: Don Slutz <dslutz@verizon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> MST: fix 32 bit
2014-06-23xen-hvm: Fix xen_hvm_init() to adjust pc memory layoutDon Slutz1-14/+15
This is just below_4g_mem_size and above_4g_mem_size which is used later in QEMU. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Don Slutz <dslutz@verizon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23q35: Use PC_Q35_COMPAT_1_4 on pc-q35-1.4 compat_propsEduardo Habkost1-1/+1
pc-q35-1.4 was incorrectly using PC_COMPAT_1_4 instead of PC_Q35_COMPAT_1_4. The only side-effect was that the hpet compat property (inherited from PC_Q35_COMPAT_1_7) was missing. Without this patch, pc-q35-1.4 inicorrectly initializes hpet-intcap to 0xff0104 (behavior introduced in QEMU 2.0, by commit 7a10ef51c2397ac4323bc786af02c58b413b5cd2). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-06-19pc: pass MachineState to pc_memory_initPaolo Bonzini1-3/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-By: Igor Mammedov <imammedo@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: add acpi-device link to PCMachineStateIgor Mammedov1-0/+10
the link will used later to access device implementing ACPI functions instead of adhoc lookup in QOM tree. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19pc: add 'etc/reserved-memory-end' fw_cfg interface for SeaBIOSIgor Mammedov1-0/+3
'etc/reserved-memory-end' will allow QEMU to tell BIOS where PCI BARs mapping could safely start in high memory. Allowing BIOS to start mapping 64-bit PCI BARs at address where it wouldn't conflict with other mappings QEMU might place before it. That permits QEMU to reserve extra address space before 64-bit PCI hole for memory hotplug. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-18pc: create custom generic PC machine typeIgor Mammedov1-6/+6
it will be used for PC specific options/variables Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-28machine: Conversion of QEMUMachineInitArgs to MachineStateMarcel Apfelbaum1-33/+34
Total removal of QEMUMachineInitArgs struct. QEMUMachineInitArgs's fields are copied into MachineState. Removed duplicated fields from MachineState. All the other changes are only mechanical refactoring, no semantic changes. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (s390) Reviewed-by: Michael S. Tsirkin <mst@redhat.com> (PC) [AF: Renamed ms -> machine, use MACHINE_GET_CLASS()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-05-07pc: add compat_props placeholder for 2.0 machine typeGabriel L. Somlo1-0/+4
Add the "boilerplate" necessary for subsequent patches to simply drop in compat_props for pc machines 2.0 and older. This patch contains no functional changes. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-05SMBIOS: Build aggregate smbios tables and entry pointGabriel L. Somlo1-1/+3
Build an aggregate set of smbios tables and an entry point structure. Insert tables and entry point into fw_cfg respectively under "etc/smbios/smbios-tables" and "etc/smbios/smbios-anchor". Machine types <= 2.0 will for now continue using field-by-field overrides to SeaBIOS defaults, but for machine types 2.1 and up we expect the BIOS to look for and use the aggregate tables generated by this patch. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> [ kraxel: fix 32bit build ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-05SMBIOS: Rename symbols to better reflect future useGabriel L. Somlo1-5/+5
Rename the following symbols: - smbios_set_type1_defaults() to the more general smbios_set_defaults(); - bool smbios_type1_defaults to the more general smbios_defaults; - smbios_get_table() to smbios_get_table_legacy(); This patch contains no functional changes. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-05pc: add 2.1 machine typeMichael S. Tsirkin1-3/+23
At the moment, 2.1 and 2.0 machines are identical. As several people are working on incompatible changes to the PC machine, collaboration will be made easier by merging this place-holder. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-13target-i386: Enable x2apic by default on KVMEduardo Habkost1-0/+1
When on KVM mode, enable x2apic by default on all CPU models. Normally we try to keep the CPU model definitions as close as the real CPUs as possible, but x2apic can be emulated by KVM without host CPU support for x2apic, and it improves performance by reducing APIC access overhead. x2apic emulation is available on KVM since 2009 (Linux 2.6.32-rc1), there's no reason for not enabling x2apic by default when running KVM. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-11pc: avoid duplicate names for ROM MRsMichael S. Tsirkin1-0/+1
Since commit 04920fc0faa4760f9c4fc0e73b992b768099be70 loader: store FW CFG ROM files in RAM RAM MRs including ROM files in FW CFGs are created and named using the file basename. This becomes problematic if these names are supplied by user, since the basename might not be unique. There are two cases we care about: - option-rom flag. - option ROM for devices. This triggers e.g. when using rombar=0. At the moment we get an assert. E.g qemu -option-rom /usr/share/ipxe/8086100e.rom -option-rom /usr/share/ipxe.efi/8086100e.rom RAMBlock "/rom@genroms/8086100e.rom" already registered, abort! This is a regression from 1.6. For now let's keep it simple and just avoid creating the MRs in case of option ROMs. when using 1.7 machine types, enable option ROMs in RAM to match that version. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-09loader: rename in_ram/has_mrMichael S. Tsirkin1-1/+1
we put copy of ROMs in MR for migration. but the name rom_in_ram makes one think we load it in guest RAM. Rename has_mr to make intent clearer. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26q35: document gigabyte_alignMichael S. Tsirkin1-0/+13
Document the logic behind the below/above 4G split. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26q35: gigabyte alignment for ramGerd Hoffmann1-2/+5
Map 2G (q35) of memory below 4G, so the RAM pieces are nicely aligned to gigabyte borders. Keep old memory layout for (a) old machine types and (b) in case all memory fits below 4G and thus we don't have to split RAM into pieces in the first place. The later makes sure this change doesn't take away memory from 32bit guests. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-11hpet: enable to entitle more irq pins for hpetLiu Ping Fan1-4/+8
Owning to some different hardware design, piix and q35 need different compat. So making them diverge. On q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23 can be assigned to hpet as guest chooses. So we introduce intcap property to do that. Consider the compat and piix/q35, we finally have the following value for intcap: For piix, hpet's intcap is hard coded as IRQ2. For pc-q35-1.7 and earlier, we use IRQ2 for compat reason. Otherwise IRQ2, IRQ8, and IRQ16~23 are allowed. Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10smbios: Set system manufacturer, product & version by defaultMarkus Armbruster1-0/+20
Currently, we get SeaBIOS defaults: manufacturer Bochs, product Bochs, no version. Best SeaBIOS can do, but we can provide better defaults: manufacturer QEMU, product & version taken from QEMUMachine desc and name. Take care to do this only for new machine types, of course. Note: Michael Tsirkin doesn't trust us to keep values of QEMUMachine member product stable in the future. Use copies instead, and in a way that makes it obvious that they're guest ABI. Note that we can be trusted to keep values of member name, because that has always been ABI. Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-10pc: s/INT64_MAX/UINT64_MAX/Paolo Bonzini1-1/+1
It doesn't make sense for a region to be INT64_MAX in size: memory core uses UINT64_MAX as a special value meaning "all 64 bit" this is what was meant here. While this should never affect the PC system which at the moment always has < 63 bit size, this makes us hit all kind of corner case bugs with sub-pages, so users are probably better off if we just use UINT64_MAX instead. Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-06pc: switch 2.0 machine types to large seabios binaryGerd Hoffmann1-1/+3
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-02add pc-{i440fx,q35}-2.0 machine typesGerd Hoffmann1-1/+10
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-11-21pc: get rid of builtin pvpanic for "-M pc-1.5"Paolo Bonzini1-7/+0
This causes two slight backwards-incompatibilities between "-M pc-1.5" and 1.5's "-M pc": (1) a fw_cfg file is removed with this patch. This is only a problem if migration stops the virtual machine exactly during fw_cfg enumeration. (2) after migration, a VM created without an explicit "-device pvpanic" will stop reporting panics to management. The first problem only occurs if migration is done at a very, very early point (and I'm not sure it can happen in practice for reasonable-size VMs, since it will likely take more time to send the RAM to destination, than it will take for BIOS to scan fw_cfg). The second problem only occurs if the guest panics _and_ has a guest driver _and_ management knows to look at the crash event, so it is mostly theoretical at this point in time. Thus keep the code simple, and pretend it was never broken. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-14pc: disable pci-infoIgor Mammedov1-1/+1
The BIOS that we ship in 1.7 does not use pci info from host and so far isn't going to use it. Taking in account problems it caused see 9604f70fdf and to avoid future incompatibility issues, it's safest to disable that interface by default for all machine types including 1.7 as it was never exposed/used by guest. And properly remove/cleanup it during 1.8 development cycle. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14i386: ACPI table generation code from seabiosMichael S. Tsirkin1-0/+3
This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-11Merge remote-tracking branch 'sstabellini/xen-2013-09-09' into stagingAnthony Liguori1-0/+5
# By Anthony PERARD # Via Stefano Stabellini * sstabellini/xen-2013-09-09: pc_q35: Initialize Xen. pc: Initializing ram_memory under Xen. Message-id: alpine.DEB.2.02.1309091718030.6397@kaball.uk.xensource.com Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-09-09pc_q35: Initialize Xen.Anthony PERARD1-0/+5
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-06e1000: add interrupt mitigation supportVincenzo Maffione1-1/+14
This patch partially implements the e1000 interrupt mitigation mechanisms. Using a single QEMUTimer, it emulates the ITR register (which is the newer mitigation register, recommended by Intel) and approximately emulates RADV and TADV registers. TIDV and RDTR register functionalities are not emulated (RDTR is only used to validate RADV, according to the e1000 specs). RADV, TADV, TIDV and RDTR registers make up the older e1000 mitigation mechanism and would need a timer each to be completely emulated. However, a single timer has been used in order to reach a good compromise between emulation accuracy and simplicity/efficiency. The implemented mechanism can be enabled/disabled specifying the command line e1000-specific boolean parameter "mitigation", e.g. qemu-system-x86_64 -device e1000,mitigation=on,... ... For more information, see the Software developer's manual at http://download.intel.com/design/network/manuals/8254x_GBe_SDM.pdf. Interrupt mitigation boosts performance when the guest suffers from an high interrupt rate (i.e. receiving short UDP packets at high packet rate). For some numerical results see the following link http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> (for pc-* machines) Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-01pc: reduce duplication, fix PIIX descriptionsMichael S. Tsirkin1-11/+14
We have a lot of code duplication between machine types, this increases with each new machine type and each new field. This has already introduced a minor bug: description for pc-1.3 says "Standard PC" while description for pc-1.4 is "Standard PC (i440FX + PIIX, 1996)" which makes you think 1.3 is somehow more standard, or newer, while in fact it's a revision of the same PC. This patch addresses this issue by using macros, along the lines used by PC_COMPAT_X_X - only for non-property options. The approach can extend to non-PC machine types. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-28hw: Clean up bogus default boot orderMarkus Armbruster1-4/+4
We set default boot order "cad" in every single machine definition except "pseries" and "moxiesim", even though very few boards actually care for boot order, and "cad" makes sense for even fewer. Machines that care: * pc and its variants Accept up to three letters 'a', 'b' (undocumented alias for 'a'), 'c', 'd' and 'n'. Reject all others (fatal with -boot). * nseries (n800, n810) Check whether order starts with 'n'. Silently ignored otherwise. * prep, g3beige, mac99 Extract the first character the machine understands (subset of 'a'..'f'). Silently ignored otherwise. * spapr Accept an arbitrary string (vl.c restricts it to contain only 'a'..'p', no duplicates). * sun4[mdc] Use the first character. Silently ignored otherwise. Strip characters these machines ignore from their default boot order. For all other machines, remove the unused default boot order alltogether. Note that my rename of QEMUMachine member boot_order to default_boot_order and QEMUMachineInitArgs member boot_device to boot_order has a welcome side effect: it makes every use of boot orders visible in this patch, for easy review. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-21pc: pc_compat_1_4() now can call pc_compat_1_5()Eduardo Habkost1-2/+2
It just needs to set has_pvpanic=false after calling it. This way, it won't be a special case anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-21pc: Create pc_compat_*() functionsEduardo Habkost1-7/+24
Making the older compat functions call the newer compat functions at the beginning allows the older functions undo what's done by newer compat functions. e.g.: pc_compat_1_4() will be able to call pc_compat_1_5() and then set has_pvpanic=false. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-21pc: Don't explode QEMUMachineInitArgs into local variables needlesslyMarkus Armbruster1-13/+9
Don't explode when the variable is used just a few times, and never changed. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-21loader: store FW CFG ROM files in RAMMichael S. Tsirkin1-0/+2
ROM files that are put in FW CFG are copied to guest ram, by BIOS, but they are not backed by RAM so they don't get migrated. Each time we change two bytes in such a ROM this breaks cross-version migration: since we can migrate after BIOS has read the first byte but before it has read the second one, getting an inconsistent state. Future-proof this by creating, for each such ROM, an MR serving as the backing store. This MR is never mapped into guest memory, but it's registered as RAM so it's migrated with the guest. Naturally, this only helps for -M 1.7 and up, older machine types will still have the cross-version migration bug. Luckily the race window for the problem to trigger is very small, which is also likely why we didn't notice the cross-version migration bug in testing yet. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2013-08-21pc: cleanup 1.4 compat supportMichael S. Tsirkin1-2/+2
Make 1.4 compat code call the 1.6 one, reducing code duplication. Add comment explaining why we can't make 1.4 call 1.5 as usual. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2013-08-13pvpanic: fix bad mergeAnthony Liguori1-1/+1
Context matching caused the 'has_pvpanic = true' to be applied to the 1.6 machine type instead of the 1.5 machine type. Reported-by: Markus Armbruster <armbru@redhat.com> Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-08-12Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into stagingAnthony Liguori1-0/+1
QOM CPUState refactorings * Fix X86CPU Westmere CPUID for pc-*-1.4 and older * afaerber/tags/qom-cpu-for-anthony: pc: Remove PCLMULQDQ from Westmere on pc-*-1.4 and older Conflicts: hw/i386/pc_piix.c hw/i386/pc_q35.c Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-08-12hw/misc: don't create pvpanic device by defaultMarcel Apfelbaum1-3/+4
This patch is based on Hu Tao's: http://lists.nongnu.org/archive/html/qemu-devel/2013-08/msg00124.html No need to hard-code pvpanic as part of the machine. It can be added with "-device pvpanic" from command line (The next patch). Anyway, for backport compatibility it is still part of 1.5 machine. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Reviewed-by: Hu Tao <hutao@cn.fujitsu.com> Message-id: 1376233843-19410-2-git-send-email-marcel.a@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-08-12pc: Remove PCLMULQDQ from Westmere on pc-*-1.4 and olderEduardo Habkost1-0/+1
Commit 41cb383f42d0cb51d8e3e25e3ecebc954dd4196f made a guest-visible change by adding the PCLMULQDQ bit to Westmere without adding compatibility code to keep the ABI for older machine-types. Fix it by adding the missing compat code. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-12pc_sysfw: do not make it a device anymorePaolo Bonzini1-0/+1
Move the code to hw/i386, the sole remaining property is available as !pci_enabled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1376069702-22330-4-git-send-email-aliguori@us.ibm.com Rebased. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-08-12pc: disable pci-info for 1.6Michael S. Tsirkin1-2/+7
The BIOS that we ship in 1.6 does not use pci info from host (yet). Several issues turned up (e.g. around winXP boot crashes). So it's safest to disable that interface for 1.6 machine types for now, leave it on for 1.7 as we have enough time to fix issues if any. Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-29pc: add Q35 to QOM composition tree under /machineIgor Mammedov1-0/+1
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Message-id: 1375109277-25561-5-git-send-email-imammedo@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-23q35: Use type-safe cast instead of direct access of parent devHu Tao1-1/+3
And remove variables if possible. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> [AF: Converted remaining access and renamed to parent_obj] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-08Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori1-3/+15
pci,misc enhancements This includes some pci enhancements: Better support for systems with multiple PCI root buses FW cfg interface for more robust pci programming in BIOS Minor fixes/cleanups for fw cfg and cross-version migration - because of dependencies with other patches Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Sun 07 Jul 2013 03:11:18 PM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By David Gibson (10) and others # Via Michael S. Tsirkin * mst/tags/for_anthony: pci: Fold host_buses list into PCIHostState functionality pci: Remove domain from PCIHostBus pci: Simpler implementation of primary PCI bus pci: Add root bus parameter to pci_nic_init() pci: Add root bus argument to pci_get_bus_devfn() pci: Replace pci_find_domain() with more general pci_root_bus_path() pci: Use helper to find device's root bus in pci_find_domain() pci: Abolish pci_find_root_bus() pci: Move pci_read_devaddr to pci-hotplug-old.c pci: Cleanup configuration for pci-hotplug.c pvpanic: fix fwcfg for big endian hosts pvpanic: initialization cleanup MAINTAINERS: s/Marcelo/Paolo/ e1000: cleanup process_tx_desc pc_piix: cleanup init compat handling pc: pass PCI hole ranges to Guests pci: store PCI hole ranges in guestinfo structure range: add Range structure Message-id: 1373228271-31223-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04pc: pass PCI hole ranges to GuestsMichael S. Tsirkin1-2/+10
Guest currently has to jump through lots of hoops to guess the PCI hole ranges. It's fragile, and makes us change BIOS each time we add a new chipset. Let's report the window in a ROM file, to make BIOS do exactly what QEMU intends. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04pci: store PCI hole ranges in guestinfo structureMichael S. Tsirkin1-1/+5
Will be used to pass hole ranges to guests. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-10target-i386: Update model values on Conroe/Penryn/Nehalem CPU modelsEduardo Habkost1-0/+4
The CPUID model values on Conroe, Penryn, and Nehalem are too conservative and don't reflect the values found on real Conroe, Penryn, and Nehalem CPUs. This causes at least one known problems: Windows XP disables sysenter when (family == 6 && model <= 2), but Skype tries to use the sysenter instruction anyway because it is reported as available on CPUID, making it crash. This patch sets appropriate model values that correspond to real Conroe, Penryn, and Nehalem CPUs. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-10pc: Create pc-*-1.6 machine-typesEduardo Habkost1-1/+11
Some CPU model fixes are going to be included and they will require compatibility properties in the pc-*-1.5 machine-types. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
generated by cgit v1.1 at 2024-12-29 15:37:04 +0000