aboutsummaryrefslogtreecommitdiff
path: root/hw/i2c
AgeCommit message (Collapse)AuthorFilesLines
2018-07-03ppc4xx_i2c: Rewrite to model hardware more closelyBALATON Zoltan1-142/+157
Rewrite to make it closer to how real device works so that guest OS drivers can access I2C devices. Previously this was only a hack to allow U-Boot to get past accessing SPD EEPROMs but to support other I2C devices and allow guests to access them we need to model real device more properly. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-26hw/i2c/omap_i2c: Use qemu_log_mask(UNIMP) instead of fprintfPhilippe Mathieu-Daudé1-8/+12
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20180624040609.17572-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-21ppc4xx_i2c: Implement directcntl registerBALATON Zoltan1-1/+13
As well as being able to generate its own i2c transactions, the ppc4xx i2c controller has a DIRECTCNTL register which allows explicit control of the i2c lines. Using this register an OS can directly bitbang i2c operations. In order to let emulated i2c devices respond to this, we need to wire up the DIRECTCNTL register to qemu's bitbanged i2c handling code. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-21ppc4xx_i2c: Remove unimplemented sdata and intr registersBALATON Zoltan1-15/+1
We don't emulate slave mode so related registers are not needed. [lh]sadr are only retained to avoid too many warnings and simplify debugging but sdata is not even correct because device has a 4 byte FIFO instead so just remove this unimplemented register for now. The intr register is also not implemented correctly, it is for diagnostics and normally not even visible on device without explicitly enabling it. As no guests are known to need this remove it as well. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-12ppc4xx_i2c: Clean up and improve error loggingBALATON Zoltan1-43/+51
Make it more readable by converting register indexes to decimal (avoids lot of superfluous 0x0) and distinguish errors caused by accessing non-existent vs. unimplemented registers. No functional change. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-08hw/i2c: Add trace eventsPhilippe Mathieu-Daudé2-7/+25
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180606191801.6331-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08smbus: add a smbus_eeprom_init_one() routineCédric Le Goater1-5/+11
This is an helper routine to add a single EEPROM on an I2C bus. It can be directly used by smbus_eeprom_init() which adds a certain number of EEPROMs on mips and x86 machines. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180530064049.27976-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::initPhilippe Mathieu-Daudé1-13/+0
I2CSlaveClass::init is no more used, remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-3-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-3-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::initPhilippe Mathieu-Daudé2-12/+2
SMBusDeviceClass::init is no more used, remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-2-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-2-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-01hw/i2c-ddc: Do not fail writesLinus Walleij1-2/+2
The tx function of the DDC I2C slave emulation was returning 1 on all writes resulting in NACK in the I2C bus. Changing it to 0 makes the DDC I2C work fine with bit-banged I2C such as the versatile I2C. I guess it was not affecting whatever I2C controller this was used with until now, but with the Versatile I2C it surely does not work. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-4-linus.walleij@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01i2c: Move the bus class to i2c.hCorey Minyard1-17/+0
Some devices need access to it. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-3-linus.walleij@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-01i2c: Fix some brace style issuesCorey Minyard1-2/+1
Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Message-id: 20180227104903.21353-2-linus.walleij@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster1-1/+0
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-05i2c: Add a CONFIG_I2C master switch to the configuration filesThomas Huth1-1/+1
The i2c core and the at24c EEPROM should only be compiled and linked on the machines that support i2c. Otherwise it's quite strange to see the at24c-eeprom to be "available" on qemu-system-s390x for example. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1516634853-15883-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-22Replace all occurances of __FUNCTION__ with __func__Alistair Francis1-3/+3
Replace all occurs of __FUNCTION__ except for the check in checkpatch with the non GCC specific __func__. One line in hcd-musb.c was manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> [THH: Removed hunks related to pxa2xx_mmci.c (fixed already)] Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-01-16Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+1
* QemuMutex tracing improvements (Alex) * ram_addr_t optimization (David) * SCSI fixes (Fam, Stefan, me) * do {} while (0) fixes (Eric) * KVM fix for PMU (Jan) * memory leak fixes from ASAN (Marc-André) * migration fix for HPET, icount, loadvm (Maria, Pavel) * hflags fixes (me, Tao) * block/iscsi uninitialized variable (Peter L.) * full support for GMainContexts in character devices (Peter Xu) * more boot-serial-test (Thomas) * Memory leak fix (Zhecheng) # gpg: Signature made Tue 16 Jan 2018 14:15:45 GMT # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (51 commits) scripts/analyse-locks-simpletrace.py: script to analyse lock times util/qemu-thread-*: add qemu_lock, locked and unlock trace events cpu: flush TB cache when loading VMState block/iscsi: fix initialization of iTask in iscsi_co_get_block_status find_ram_offset: Align ram_addr_t allocation on long boundaries find_ram_offset: Add comments and tracing cpu_physical_memory_sync_dirty_bitmap: Another alignment fix checkpatch: Enforce proper do/while (0) style maint: Fix macros with broken 'do/while(0); ' usage tests: Avoid 'do/while(false); ' in vhost-user-bridge chardev: Clean up previous patch indentation chardev: Use goto/label instead of do/break/while(0) mips: Tweak location of ';' in macros net: Drop unusual use of do { } while (0); irq: fix memory leak cpus: unify qemu_*_wait_io_event icount: fixed saving/restoring of icount warp timers scripts/qemu-gdb/timers.py: new helper to dump timer state scripts/qemu-gdb: add simple tcg lock status helper target-i386: update hflags on Hypervisor.framework ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16maint: Fix macros with broken 'do/while(0); ' usageEric Blake1-1/+1
The point of writing a macro embedded in a 'do { ... } while (0)' loop (particularly if the macro has multiple statements or would otherwise end with an 'if' statement) is so that the macro can be used as a drop-in statement with the caller supplying the trailing ';'. Although our coding style frowns on brace-less 'if': if (cond) statement; else something else; that is the classic case where failure to use do/while(0) wrapping would cause the 'else' to pair with any embedded 'if' in the macro rather than the intended outer 'if'. But conversely, if the macro includes an embedded ';', then the same brace-less coding style would now have two statements, making the 'else' a syntax error rather than pairing with the outer 'if'. Thus, even though our coding style with required braces is not impacted, ending a macro with ';' makes our code harder to port to projects that use brace-less styles. The change should have no semantic impact. I was not able to fully compile-test all of the changes (as some of them are examples of the ugly bit-rotting debug print statements that are completely elided by default, and I didn't want to recompile with the necessary -D witnesses - cleaning those up is left as a bite-sized task for another day); I did, however, audit that for all files touched, all callers of the changed macros DID supply a trailing ';' at the callsite, and did not appear to be used as part of a brace-less conditional. Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\ Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20171201232433.25193-7-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-11Merge remote-tracking branch 'origin/master' into HEADMichael S. Tsirkin3-32/+168
Resolve conflicts around apb. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-10ppc4xx_i2c: Implement basic I2C functionsBALATON Zoltan1-30/+168
Enough to please U-Boot and make it able to detect SDRAM SPD EEPROMs Signed-off-by: François Revol <revol@free.fr> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-12-22smbus: do not immediately complete commandsHervé Poussineau1-1/+15
PIIX4 errata says that "immediate polling of the Host Status Register BUSY bit may indicate that the SMBus is NOT busy." Due to this, some code does the following steps: (a) set parameters (b) start command (c) check for smbus busy bit set (to know that command started) (d) check for smbus busy bit not set (to know that command finished) Let (c) happen, by immediately setting the busy bit, and really executing the command when status register has been read once. This fixes a problem with AMIBIOS, which can now properly initialize the PIIX4. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-12-18hw/i2c: remove old i386 dependencyPhilippe Mathieu-Daudé2-2/+0
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-10-15pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devicesEduardo Habkost1-0/+4
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-27migration: pre_save return intDr. David Alan Gilbert1-1/+3
Modify the pre_save method on VMStateDescription to return an int rather than void so that it potentially can fail. Changed zillions of devices to make them return 0; the only case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already had an error_report/return case. Note: If you add an error exit in your pre_save you must emit an error_report to say why. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-2-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-21hw/i2c/omap_i2c.c: Don't use old_mmioPeter Maydell1-12/+32
Don't use old_mmio in the memory region ops struct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505580378-9044-6-git-send-email-peter.maydell@linaro.org
2017-09-08ppc4xx_i2c: Move to hw/i2cBALATON Zoltan2-0/+217
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-06-02Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170601' ↵Peter Maydell1-0/+1
into staging migration/next for 20170601 # gpg: Signature made Thu 01 Jun 2017 17:51:04 BST # gpg: using RSA key 0xF487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * remotes/juanquintela/tags/migration/20170601: migration: Move include/migration/block.h into migration/ migration: Export ram.c functions in its own file migration: Create include for migration snapshots migration: Export rdma.c functions in its own file migration: Export tls.c functions in its own file migration: Export socket.c functions in its own file migration: Export fd.c functions in its own file migration: Export exec.c functions in its own file migration: Split qemu-file.h migration: Remove unneeded includes of migration/vmstate.h migration: shut src return path unconditionally migration: fix leak of src file on dst migration: Remove section_id parameter from vmstate_load migration: loadvm handlers are not used migration: Use savevm_handlers instead of loadvm copy Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-02aspeed/i2c: introduce a state machineCédric Le Goater1-3/+33
The Aspeed I2C controller maintains a state machine in the command register, which is mostly used for debug. Let's start adding a few states to handle abnormal STOP commands. Today, the model uses the busy status of the bus as a condition to do so but it is not precise enough. Also remove the ABNORMAL bit for failing TX commands. This is incorrect with respect to the specs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-02aspeed/i2c: handle LAST command under the RX commandCédric Le Goater1-3/+6
Today, the LAST command is handled with the STOP command but this is incorrect. Also nack the I2C bus when a LAST is issued. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-02aspeed/i2c: improve command handlingCédric Le Goater1-6/+18
Multiple I2C commands can be fired simultaneously and the controller execute the commands following these priorities: (1) Master Start Command (2) Master Transmit Command (3) Slave Transmit Command or Master Receive Command (4) Master Stop Command The current code is incorrect with respect to the above sequence and needs to be reworked to handle each individual command. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1494827476-1487-2-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-01migration: Split qemu-file.hJuan Quintela1-0/+1
Split the file into public and internal interfaces. I have to rename the external one because we can't have two include files with the same name in the same directory. Build system gets confused. The only exported functions are the ones that handle basic types. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-17qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatableEduardo Habkost3-3/+3
cannot_instantiate_with_device_add_yet was introduced by commit efec3dd631d94160288392721a5f9c39e50fb2bc to replace no_user. It was supposed to be a temporary measure. When it was introduced, we had 54 cannot_instantiate_with_device_add_yet=true lines in the code. Today (3 years later) this number has not shrunk: we now have 57 cannot_instantiate_with_device_add_yet=true lines. I think it is safe to say it is not a temporary measure, and we won't see the flag go away soon. Instead of a long field name that misleads people to believe it is temporary, replace it a shorter and less misleading field: user_creatable. Except for code comments, changes were generated using the following Coccinelle patch: @@ expression DC; @@ ( -DC->cannot_instantiate_with_device_add_yet = false; +DC->user_creatable = true; | -DC->cannot_instantiate_with_device_add_yet = true; +DC->user_creatable = false; ) @@ typedef ObjectClass; expression dc; identifier class, data; @@ static void device_class_init(ObjectClass *class, void *data) { ... dc->hotpluggable = true; +dc->user_creatable = true; ... } @@ @@ struct DeviceClass { ... -bool cannot_instantiate_with_device_add_yet; +bool user_creatable; ... } @@ expression DC; @@ ( -!DC->cannot_instantiate_with_device_add_yet +DC->user_creatable | -DC->cannot_instantiate_with_device_add_yet +!DC->user_creatable ) Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-2-ehabkost@redhat.com> [ehabkost: kept "TODO remove once we're there" comment] Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-20arm: Uniquely name imx25 I2C buses.Alastair D'Silva1-1/+1
The imx25 chip provides 3 i2c buses, but they have all been named "i2c", which makes it difficult to predict which bus a device will be connected to when specified on the command line. This patch addresses the issue by naming the buses uniquely: i2c-bus.0 i2c-bus.1 i2c-bus.2 Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Message-id: 20170105043430.3176-2-alastair@au1.ibm.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-09i2c: Allow I2C devices to NAK start eventsCorey Minyard3-11/+37
Add a return value to the event handler. Some I2C devices will NAK if they have no data, so allow them to do this. This required the following changes: Go through all the event handlers and change them to return int and return 0. Modify i2c_start_transfer to terminate the transaction on a NAK. Modify smbus handing to not assert if a NAK occurs on a second operation, and terminate the transaction and return -1 instead. Add some information on semantics to I2CSlaveClass. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27hw/i2c: Add a NULL check for i2c slave init callbacksAlastair D'Silva1-1/+5
Add a NULL check for i2c slave init callbacks, so that we no longer need to implement empty init functions. Signed-off-by: Alastair D'Silva <alastair@d-silva.org> Message-id: 20161202054617.6749-4-alastair@au1.ibm.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: squashed in later tweak from Alistair to if() phrasing] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-11-07hw/i2c/bitbang_i2c: Handle NACKs from devicesPeter Maydell1-4/+15
If the guest attempts to talk to a nonexistent device over i2c, the i2c_start_transfer() function will return non-zero, indicating that the bus is signalling a NACK. Similarly, if the i2c_send() function returns nonzero then the target device returned a NACK. Handle this possibility in the bitbang_i2c code, by returning the state machine to the STOPPED state and returning the NACK bit to the guest. This bit of missing functionality was spotted by Coverity (it noticed that we weren't checking the return value from i2c_start_transfer()). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1477332749-27098-1-git-send-email-peter.maydell@linaro.org
2016-10-24i2c: Add asserts for second smbus i2c_start_transfer()Corey Minyard2-4/+15
Some SMBus operations restart the transfer to convert from write to read mode without an intervening i2c_end_transfer(). The second call cannot fail, so the return code is unchecked, but this causes Coverity to complain. So add some asserts and documentation about this. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24i2c: Fix SMBus read transactions to avoid double eventsCorey Minyard1-13/+19
Change 2293c27faddf (i2c: implement broadcast write) added broadcast capability to the I2C bus, but it broke SMBus read transactions. An SMBus read transaction does two i2c_start_transaction() calls without an intervening i2c_end_transfer() call. This will result in i2c_start_transfer() adding the same device to the current_devs list twice, and then the ->event() for the same device gets called twice in the second call to i2c_start_transfer(), resulting in the smbus code getting confused. Note that this happens even with pure I2C devices when simulating SMBus over I2C. This fix only scans the bus if the current set of devices is empty. This means that the current set of devices stays fixed until i2c_end_transfer() is called, which is really what you want. This also deletes the empty check from the top of i2c_end_transfer(). It's unnecessary, and it prevents the broadcast variable from being set to false at the end of the transaction if no devices were on the bus. Cc: KONRAD Frederic <fred.konrad@greensocs.com> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com> Cc: Kwon <hyun.kwon@xilinx.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1470153614-6657-1-git-send-email-minyard@acm.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-03i2c: fix migration regression introduced by broadcast supportIgor Mammedov1-3/+7
QEMU fails migration with following error: qemu-system-x86_64: Missing section footer for i2c_bus qemu-system-x86_64: load of migration failed: Invalid argument when migrating from: qemu-system-x86_64-v2.6.0 -m 256M rhel72.img -M pc-i440fx-2.6 to qemu-system-x86_64-v2.7.0-rc0 -m 256M rhel72.img -M pc-i440fx-2.6 Regression is added by commit 2293c27f (i2c: implement broadcast write) Fix it by dropping 'broadcast' VMState introduced by 2293c27f and reuse broadcast 0x00 address as broadcast flag in bus->saved_address. Then if there were ongoing broadcast at migration time, set bus->saved_address to it and at i2c_slave_post_load() time check for it instead of transfering and using 'broadcast' VMState. As result of reusing existing saved_address VMState, no compat glue will be needed to keep forward/backward compatiblity. which makes fix much less intrusive. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1469623198-177227-1-git-send-email-imammedo@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ICH9 SMB: make TYPE_ICH9_SMB_DEVICE macro publicEfimov Vasily1-1/+0
ICH9 SMB bridge can be created using qdev API despite existence of helper function. The type name is needed for such creation. Using a preprocessor alias instead the string type name itself is preferable. The patch makes the alias accessible through the header. Signed-off-by: Efimov Vasily <real@ispras.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-14hw/i2c-ddc.c: Implement DDC I2C slavePeter Maydell2-0/+309
Implement an I2C slave which implements DDC and returns the EDID data for an attached monitor. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1465833014-21982-7-git-send-email-fred.konrad@greensocs.com - Rebased on the current master. - Modified for QOM. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> [PMM: actually wire up the vmstate to dc->vmsd] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14i2c: Factor our send() and recv() common logicPeter Crosthwaite1-18/+34
Most of the control flow logic between send and recv (error checking etc) is the same. Factor this out into a common send_recv() API. This is then usable by clients, where the control logic for send and receive differs only by a boolean. E.g. if (send) i2c_send(...): else i2c_recv(...); becomes: i2c_send_recv(... , send); Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1465833014-21982-4-git-send-email-fred.konrad@greensocs.com Changes from FK: * Rebased on master. * Rebased on my i2c broadcast patch. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14i2c: implement broadcast writeKONRAD Frederic1-55/+79
This does a write to every slaves when the I2C bus get a write to address 0. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Message-id: 1465833014-21982-3-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14i2cbus: remove unused dev fieldKONRAD Frederic1-1/+0
The dev field in i2cbus is not used. So just drop it. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Message-id: 1465833014-21982-2-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/i2c: QOM'ify versatile_i2c.cxiaoqiang zhao1-13/+6
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-5-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/i2c: QOM'ify omap_i2c.cxiaoqiang zhao1-17/+25
* Split the omap_i2c_init into an instance_init and realize function * Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-4-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/i2c: QOM'ify exynos4210_i2c.cxiaoqiang zhao1-7/+6
* Rename the exynos4210_i2c_realize to exynos4210_i2c_init * Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-3-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/i2c: QOM'ify bitbang_i2c.cxiaoqiang zhao1-8/+6
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-2-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06i2c: add aspeed i2c controllerCédric Le Goater2-0/+441
The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers directly connected to the APB bus. They can be programmed as master or slave but the propopsed model only supports the master mode. On the TODO list, we also have : - improve and harden the state machine. - bus recovery support (used by the Linux driver). - transfer mode state machine bits. this is not strictly necessary as it is mostly used for debug. The bus busy bit is deducted from the I2C core engine of qemu. - support of the pool buffer: 2048 bytes of internal SRAM (not used by the Linux driver). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org [PMM: removed unused functions aspeed_i2c_bus_get_state() and aspeed_i2c_bus_set_state()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-19hw: explicitly include qemu/log.hPaolo Bonzini2-0/+2
Move the inclusion out of hw/hw.h, most files do not need it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-18Fix some typos found by codespellStefan Weil1-1/+1
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.1 at 2024-11-03 04:10:51 +0000