aboutsummaryrefslogtreecommitdiff
path: root/hw/etraxfs.c
AgeCommit message (Collapse)AuthorFilesLines
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori1-4/+4
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc1-4/+4
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-20Compile loader only onceBlue Swirl1-1/+3
Callers must pass ELF machine, byte swapping and symbol LSB clearing information to ELF loader. A.out loader needs page size information, pass that too as a parameter. Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw. Adjust callers. Also use target_phys_addr_t instead of target_ulong for addresses: loader addresses aren't virtual. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-27kill drives_tableGerd Hoffmann1-2/+3
First step cleaning up the drives handling. This one does nothing but removing drives_table[], still it became seriously big. drive_get_index() is gone and is replaced by drives_get() which hands out DriveInfo pointers instead of a table index. This needs adaption in *tons* of places all over. The drives are now maintained as linked list. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16qdev: rework device properties.Gerd Hoffmann1-1/+1
This patch is a major overhaul of the device properties. The properties are saved directly in the device state struct now, the linked list of property values is gone. Advantages: * We don't have to maintain the list with the property values. * The value in the property list and the value actually used by the device can't go out of sync any more (used to happen for the pci.devfn == -1 case) because there is only one place where the value is stored. * A record describing the property is required now, you can't set random properties any more. There are bus-specific and device-specific properties. The former should be used for properties common to all bus drivers. Typical use case is bus addressing, i.e. pci.devfn and i2c.address. Properties have a PropertyInfo struct attached with name, size and function pointers to parse and print properties. A few common property types have PropertyInfos defined in qdev-properties.c. Drivers are free to implement their own very special property parsers if needed. Properties can have default values. If unset they are zero-filled. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka1-1/+1
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-15etrax: Don't pass CPUState to peripherals.Edgar E. Iglesias1-3/+3
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-06-11ETRAX: Correct PIC creation for the bare FS board.Edgar E. Iglesias1-2/+7
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-26Remove qdev irq sink handlingPaul Brook1-3/+3
We have both IRQ sinks and GPIO inputs. These are in principle exactly the same thing, so remove the former. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-22Introduce reset notifier orderJan Kiszka1-1/+1
Add the parameter 'order' to qemu_register_reset and sort callbacks on registration. On system reset, callbacks with lower order will be invoked before those with higher order. Update all existing users to the standard order 0. Note: At least for x86, the existing users seem to assume that handlers are called in their registration order. Therefore, the patch preserves this property. If someone feels bored, (s)he could try to identify this dependency and express it properly on callback registration. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-21Introduce is_default field for QEMUMachineAnthony Liguori1-0/+1
f80f9ec changed the order that machines are registered which had the effect of changing the default machine. This changeset introduces a new is_default field so that machine types can declare that they are the default for an architecture. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-21Convert machine registration to use module init functionsAnthony Liguori1-1/+8
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-18cris: First shot at qdev for CRIS interrupts.Edgar E. Iglesias1-3/+12
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-18etrax: Remove unused eth irq line.Edgar E. Iglesias1-3/+2
The ethernet blocks irq line to report errors is unimplemented in QEMU. Remove it for now. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-16ETRAX-TIMER: qdevify.Edgar E. Iglesias1-2/+3
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-16ETRAX-SER: qdevify.Edgar E. Iglesias1-12/+6
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-16ETRAX: Simplify PIC interface.Edgar E. Iglesias1-8/+10
Instead of exporting a custom structure to represent different interrupt types, just export the irq array and have the top elements point to the NMI lines. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-15ETRAX: Correct passing of kernel command line.Edgar E. Iglesias1-2/+2
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-05-13Remove vga_ram_sizePaul Brook1-1/+1
The vga_ram_size argument to machine init functions always has the same value, and is ignored by many machines (including SPARC32 which has an obsolete ifdef for VGA_RAM_SIZE). Remove it and push VGA_RAM_SIZE into vga_int.h. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-11Remove redundant ram_require machine properly.pbrook1-1/+0
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7090 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-09Use load_image_targphys and avoid phys_ram_base.pbrook1-1/+2
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7056 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-16graphical_console_init change (Stefano Stabellini)aliguori1-1/+1
Patch 5/7 This patch changes the graphical_console_init function to return an allocated DisplayState instead of a QEMUConsole. This patch contains just the graphical_console_init change and few other modifications mainly in console.c and vl.c. It was necessary to move the display frontends (e.g. sdl and vnc) initialization after machine->init in vl.c. This patch does *not* include any required changes to any device, these changes come with the following patches. Patch 6/7 This patch changes the QEMUMachine init functions not to take a DisplayState as an argument because is not needed any more; In few places the graphic hardware initialization function was called only if DisplayState was not NULL, now they are always called. Apart from these cases, the rest are all mechanical substitutions. Patch 7/7 This patch updates the graphic device code to use the new graphical_console_init function. As for the previous patch, in few places graphical_console_init was called only if DisplayState was not NULL, now it is always called. Apart from these cases, the rest are all mechanical substitutions. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13Check NIC model in some NIC init functions (Mark McLoughlin)aliguori1-4/+1
Some NIC init functions are only called when that model is the only valid model. In that case, it makes sense to use qemu_check_nic_model() from the NIC init function itself. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6286 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-09ETRAX: Let the ethernet PHY report the current link-state.edgar_igl1-2/+3
* PHY reports correct link-state. * Allow the board description to assign separate addresses to each PHY. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6255 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07ETRAX: Always provide a valid net model.edgar_igl1-1/+4
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6226 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07ETRAX: No need to mask off the I flag twice at reset.edgar_igl1-1/+0
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6196 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-13ETRAX-FS: Fix a segfault if pflash drive not found.edgar_igl1-1/+1
drive_get_index() returns -1 if a drive isn't found; don't use -1 to index drives_table. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5719 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-28Set default max_cpus to one.balrog1-1/+0
Clean-up machine definitions. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5566 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-22ETRAX-FS: Add support for passing kernel command linesedgar_igl1-2/+15
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5516 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-22ETRAX-FS: Correct booting of elf linux images from ram.edgar_igl1-3/+2
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5515 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-07machine struct - specify max_cpus at the per machine level (Jes Sorensen)aliguori1-0/+1
Introduce a max_cpus per-machine variable, allowing individual boards to limit it's number of CPUs. Check requested number of CPUs in setup code and exit if it exceeds the supported number for the machine. This also renders the static MAX_CPUS check obsolete, so remove this from vl.c. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5443 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-07machine struct - use C99 initializers (Jes Sorensen)aliguori1-4/+4
Modify all the machine struct declarations to use C99 initializers. This patch has no functional changes. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5442 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-05CRIS: Mask off the cache selection bit after MMU translations.edgar_igl1-17/+8
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5170 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-30Move CPU save/load registration to common code.pbrook1-1/+0
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4808 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-09CRIS: Add (untested) cpu-state save/load.edgar_igl1-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4721 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-09ETRAX: Add NMI support to the watchdog and the interrupt controller.edgar_igl1-17/+8
* Add NMI and GURU exceptions to teh interrupt controller. * Teach the watchdog timer to signal an NMI before reseting the chip. * Add etraxfs.h to hold api for etrax device models. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4720 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-06ETRAX machine updates.edgar_igl1-16/+12
* Move DMA_run into the dma controller to allow for multiple ETRAX/CRIS machines. * Support both ELF and kimage kernel images. * Correct emulation of the DMA RW_DATA register. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4678 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-27ETRAX: Allow boot from flash. Support the watchdog timer and resets through it.edgar_igl1-57/+55
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4592 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-24ETRAX: Correct check for second nic.edgar_igl1-1/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4558 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-18ETRAX: Connect both ethernet controllers.edgar_igl1-5/+11
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4488 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-11Update the etrax machine.edgar_igl1-19/+42
* Use CFI-0002 flashes. * Connect one of the ethernet blocks. * Simplified irq numbering. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4430 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-02ETRAX-FS board: Add more flash and internal memory. Select interrupt nr for theedgar_igl1-21/+37
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4302 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-27Use correct types to enable > 2G support, based on a patch fromaurel321-1/+1
Anthony Liguori. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4265 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-24RAM usage information in machine definition.balrog1-0/+1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4246 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-22Revert "Use correct types to enable > 2G support" (r4238), it isaurel321-1/+1
not yet ready. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4240 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-22Use correct types to enable > 2G support, based on a patch fromaurel321-1/+1
Anthony Liguori. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4238 c046a42c-6fe2-441c-8c8c-71466251a162
2008-03-14Made the etrax timers and serial-ports base address relocatable. Use ↵edgar_igl1-6/+12
target_phys_addr_t instead of target_ulong. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4058 c046a42c-6fe2-441c-8c8c-71466251a162
2008-03-14* Add a model of the ETRAX interrupt controller.edgar_igl1-90/+31
* Clean up the interrupt handling a bit. * Connect some NOR flash to the test board. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4055 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-18 Remove unused parameters from QEMUMachineInitFunc (Laurent Vivier)blueswir11-2/+2
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3687 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook1-1/+3
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.1 at 2025-01-12 18:48:12 +0000