aboutsummaryrefslogtreecommitdiff
path: root/hw/esp.c
AgeCommit message (Collapse)AuthorFilesLines
2012-07-14esp: add AMD PCscsi emulation (PCI SCSI adapter)Hervé Poussineau1-0/+366
The PCI version is supported in lots of Operating Systems, and has been successfully tested on: - MS DOS 6.22 (using DC390 driver) - MS Windows 3.11 (using DC390 driver) - MS Windows 98 SE (using default driver) - MS Windows NT 3.1 (using DC390 driver) - MS Windows NT 4.0 (using default driver) Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14esp: use trace framework instead of stderr outputHervé Poussineau1-7/+6
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14esp: split esp code into generic chip emulation and sysbus layerHervé Poussineau1-67/+95
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14esp: use hba_private field instead of a complex castHervé Poussineau1-4/+4
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14esp: support future change of chip_idHervé Poussineau1-1/+3
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14esp: implement Reset ATN commandHervé Poussineau1-0/+4
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14esp: implement Disable selection commandHervé Poussineau1-0/+6
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14esp: delay Transfer Information command if dma is not enabledHervé Poussineau1-0/+5
The same mechanism is already in place for some select commands. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-14esp: execute select commands immediately when it is a non-dma commandHervé Poussineau1-3/+3
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-02-22scsi: pass residual amount to command_completePaolo Bonzini1-1/+2
With the upcoming sglist support, HBAs will not see any transfer_data call and will not have a way to detect short transfers. So pass the residual amount of data upon command completion. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-02-15qom: Unify type registrationAndreas Färber1-2/+2
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: Andreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-03qdev: register all types natively through QEMU Object ModelAnthony Liguori1-8/+10
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-01-27sysbus: apic: ioapic: convert to QEMU Object ModelAnthony Liguori1-9/+18
This converts three devices because apic and ioapic are subclasses of sysbus. Converting subclasses independently of their base class is prohibitively hard. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-28sysbus: rename sysbus_init_mmio_region() to sysbus_init_mmio()Avi Kivity1-1/+1
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-11-24esp: convert to memory APIAvi Kivity1-17/+20
[benoit: fix] Signed-off-by: Benoit Canet <benoit.canet@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-28scsi: add channel to addressingPaolo Bonzini1-2/+2
This also requires little more than adding the new argument to scsi_device_find, and the qdev property. All devices by default end up on channel 0. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28scsi: allow arbitrary LUNsPaolo Bonzini1-1/+2
This only requires changes in two places: in SCSIBus, we need to look for a free LUN if somebody creates a device with a pre-existing scsi-id but the default LUN (-1, meaning "search for a free spot"); in vSCSI, we need to actually parse the LUN according to the SCSI spec. For vSCSI, max_target/max_lun are set according to the logical unit addressing format in SAM. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28scsi: remove devs array from SCSIBusPaolo Bonzini1-3/+5
Change the devs array into a linked list, and add a scsi_device_find function to navigate the children list instead. This lets the SCSI bus use more complex addressing, and HBAs can talk to the correct device when there are multiple LUNs per target. scsi_device_find may return another LUN on the same target if none is found that matches exactly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28scsi: move tcq/ndev to SCSIBusOps (now SCSIBusInfo)Paolo Bonzini1-2/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-01ESP: convert to trace frameworkBlue Swirl1-40/+30
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-21esp: avoid structure holes spotted by paholeBlue Swirl1-5/+6
Report from pahole on amd64 host: struct ESPState { SysBusDevice busdev; /* 0 5648 */ /* --- cacheline 88 boundary (5632 bytes) was 16 bytes ago --- */ uint32_t it_shift; /* 5648 4 */ /* XXX 4 bytes hole, try to pack */ qemu_irq irq; /* 5656 8 */ uint8_t rregs[16]; /* 5664 16 */ uint8_t wregs[16]; /* 5680 16 */ /* --- cacheline 89 boundary (5696 bytes) --- */ int32_t ti_size; /* 5696 4 */ uint32_t ti_rptr; /* 5700 4 */ uint32_t ti_wptr; /* 5704 4 */ uint8_t ti_buf[16]; /* 5708 16 */ uint32_t status; /* 5724 4 */ uint32_t dma; /* 5728 4 */ /* XXX 4 bytes hole, try to pack */ SCSIBus bus; /* 5736 2120 */ /* --- cacheline 122 boundary (7808 bytes) was 48 bytes ago --- */ SCSIDevice * current_dev; /* 7856 8 */ SCSIRequest * current_req; /* 7864 8 */ /* --- cacheline 123 boundary (7872 bytes) --- */ uint8_t cmdbuf[16]; /* 7872 16 */ uint32_t cmdlen; /* 7888 4 */ uint32_t do_cmd; /* 7892 4 */ uint32_t dma_left; /* 7896 4 */ uint32_t dma_counter; /* 7900 4 */ uint8_t * async_buf; /* 7904 8 */ uint32_t async_len; /* 7912 4 */ /* XXX 4 bytes hole, try to pack */ ESPDMAMemoryReadWriteFunc dma_memory_read; /* 7920 8 */ ESPDMAMemoryReadWriteFunc dma_memory_write; /* 7928 8 */ /* --- cacheline 124 boundary (7936 bytes) --- */ void * dma_opaque; /* 7936 8 */ int dma_enabled; /* 7944 4 */ /* XXX 4 bytes hole, try to pack */ void (*dma_cb)(ESPState *); /* 7952 8 */ /* size: 7960, cachelines: 125 */ /* sum members: 7944, holes: 4, sum holes: 16 */ /* last cacheline: 24 bytes */ }; /* definitions: 1 */ Fix by rearranging the structure to avoid padding. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-12scsi: pass cdb already to scsi_req_newPaolo Bonzini1-2/+2
Right now the CDB is not passed to the SCSIBus until scsi_req_enqueue. Passing it to scsi_req_new will let scsi_req_new dispatch common requests through different reqops. Moving the memcpy to scsi_req_new is a hack that will go away as soon as scsi_req_new will also take care of the parsing. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-19scsi: Add 'hba_private' to SCSIRequestHannes Reinecke1-1/+1
'tag' is just an abstraction to identify the command from the driver. So we should make that explicit by replacing 'tag' with a driver-defined pointer 'hba_private'. This saves the lookup for driver handling several commands in parallel. 'tag' is still being kept for tracing purposes. Signed-off-by: Hannes Reinecke <hare@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-12esp: cancel current request only if some request is in flightHervé Poussineau1-1/+1
This bug was introduced in 94d3f98a3f3caddd7875f9a11776daeb84962a7b: scsi_cancel_io was checking if some request was pending before trying to cancel it, while scsi_req_cancel always cancels the request. This may lead to a crash of Qemu due to dereferencing a NULL pointer, as exhibited by NetBSD 5.1 installer on MIPS Magnum emulation. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-02esp: correctly fill bus id with requested lunHervé Poussineau1-1/+1
This bug showed up after 1455084ea2c48abf23c4e4e15e378ee43457f381, and may be seen only on operating systems *not* using DMA to give commands to SCSI adapter. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-26scsi: rename arguments to the new callbacksPaolo Bonzini1-5/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Christoph Hellwig <hch@lst.de>
2011-05-26scsi: split command_complete callback in twoPaolo Bonzini1-28/+34
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Christoph Hellwig <hch@lst.de>
2011-05-26esp: rename sense to statusPaolo Bonzini1-5/+5
This mirrors the LSI patch that was recently committed. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Christoph Hellwig <hch@lst.de>
2011-05-26scsi: introduce scsi_req_get_bufPaolo Bonzini1-1/+1
... and remove some SCSIDevice variables or fields that now become unused. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-05-26scsi: introduce scsi_req_continuePaolo Bonzini1-16/+10
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Christoph Hellwig <hch@lst.de>
2011-05-26scsi: introduce scsi_req_newPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-05-26scsi: do not call send_command directlyPaolo Bonzini1-1/+1
Move the common part of scsi-disk.c and scsi-generic.c to the SCSI layer. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-05-26scsi: introduce scsi_req_cancelPaolo Bonzini1-2/+14
This is for when the request must be dropped in the void, but still memory should be freed. To this end, the devices register a second callback in SCSIBusOps. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-05-26scsi: Use 'SCSIRequest' directlyHannes Reinecke1-11/+16
Currently the SCSIRequest structure is abstracted away and cannot accessed directly from the driver. This requires the handler to do a lookup on an abstract 'tag' which identifies the SCSIRequest structure. With this patch the SCSIRequest structure is exposed to the driver. This allows use to use it directly as an argument to the SCSIDeviceInfo callback functions and remove the lookup. A new callback function 'alloc_req' is introduced matching 'free req'; unref'ing to free up resources after use is moved into the scsi_command_complete callbacks. This temporarily introduces a leak of requests that are cancelled, when they are removed from the queue and not from the driver. This is fixed later by introducing scsi_req_cancel. That patch in turn depends on this one, because the argument to scsi_req_cancel is a SCSIRequest. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-05-26scsi: introduce SCSIBusOpsPaolo Bonzini1-1/+5
There are more operations than a SCSI bus can handle, besides completing commands. One example, which this series will introduce, is cleaning up after a request is cancelled. More long term, a "SCSI bus" can represent the LUNs attached to a target; in this case, while all commands will ultimately reach a logical unit, it is the target who is in charge of answering REPORT LUNs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Christoph Hellwig <hch@lst.de>
2010-12-11Add endianness as io mem parameterAlexander Graf1-1/+2
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-11ESP: fix ESP DMA access when DMA is not enabledBlue Swirl1-2/+51
Sending ESP a command caused it to trigger DMA immediately even if DMA was not enabled at the DMA controller. Add a signal from DMA controller to ESP to tell ESP about changes in DMA enable bit. Also use the correct function for setting up GPIO outputs. This fixes NetBSD 1.6.1 through 3.0 boot. Thanks to Artyom Tarasenko for extensive debugging of the problem. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-02scsi: scsi_bus_legacy_handle_cmdline() can fail, fix callersMarkus Armbruster1-2/+1
None of its callers checks for failure. scsi_hot_add() can crash because of that: (qemu) drive_add 4 if=scsi,format=host_device,file=/dev/sg1 scsi-generic: scsi generic interface too old Segmentation fault (core dumped) Fix all callers, not just scsi_hot_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-06-10esp: lower IRQ on soft resetBlue Swirl1-5/+14
42f1ced228c9b616cfa2b69846025271618e4ef5 removed irq lowering during reset. However, for chip reset command and DMA reset signal, its actually the correct thing to do. Lower IRQ on soft reset only. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-07esp: use CamelCaseFunc for function typesBlue Swirl1-4/+4
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-16ESP: improve IRQ debuggingBlue Swirl1-0/+2
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-09scsi: move scsi-disk.h -> scsi.hGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09scsi: move scsi.h -> esp.hGerd Hoffmann1-1/+1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-07sparc32 (mostly): remove unneeded calls to device resetBlue Swirl1-2/+0
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-24esp: convert to reset + vmsdBlue Swirl1-8/+16
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-07New qdev_init_nofail()Markus Armbruster1-1/+1
Like qdev_init(), but terminate program via hw_error() instead of returning an error value. Use it instead of qdev_init() where terminating the program on failure is okay, either because it's during machine construction, or because we know that failure can't happen. Because relying in the latter is somewhat unclean, and the former is not always obvious, it would be nice to go back to qdev_init() in the not-so-obvious cases, only with proper error handling. I'm leaving that for another day, because it involves making sure that error values are properly checked by all callers. Patchworks-ID: 35168 Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05switch scsi bus to inplace allocation.Gerd Hoffmann1-5/+5
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori1-3/+3
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc1-3/+3
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-19ESP: convert to VMStateBlue Swirl1-42/+22
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.1 at 2024-12-26 06:14:32 +0000