aboutsummaryrefslogtreecommitdiff
path: root/hw/display
AgeCommit message (Collapse)AuthorFilesLines
2018-08-24hw/display/bcm2835_fb: Abstract out calculation of pitch, sizePeter Maydell1-3/+3
Abstract out the calculation of the pitch and size of the framebuffer into functions that operate on the BCM2835FBConfig struct -- these are about to get a little more complicated when we add support for virtual and physical sizes differing. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180814144436.679-6-peter.maydell@linaro.org
2018-08-24hw/display/bcm2835_fb: Reset resolution, etc correctlyPeter Maydell1-12/+15
The bcm2835_fb's initial resolution and other parameters are set via QOM properties. We should reset to those initial values on device reset, which means we need to save the QOM property values somewhere that they are not overwritten by guest changes to the framebuffer configuration. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180814144436.679-5-peter.maydell@linaro.org
2018-08-24hw/display/bcm2835_fb: Drop unused size and pitch fieldsPeter Maydell1-11/+8
The BCM2835FBState struct has a 'pitch' field which is a cached copy of xres * (bpp >> 3), and a 'size' field which is a cached copy of pitch * yres. However we don't actually do anything with these fields; delete them. We retain the now-unused slots in the VMState struct for migration compatibility. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180814144436.679-4-peter.maydell@linaro.org
2018-08-24hw/misc/bcm2835_property: Track fb settings using BCM2835FBConfigPeter Maydell1-24/+3
Refactor the fb property setting code so that rather than using a set of pointers to local variables to track whether a config value has been updated in the current mbox and if so what its new value is, we just copy all the current settings of the fb at the start, and then update that copy as we go along, before asking the fb to switch to it at the end. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180814144436.679-3-peter.maydell@linaro.org
2018-08-24hw/misc/bcm2835_fb: Move config fields to their own structPeter Maydell1-55/+59
The handling of framebuffer properties in the bcm2835_property code is a bit clumsy, because for each of the many fb related properties we try to track the value we're about to set and whether we're going to be setting a value, and then we hand all the new values off to the framebuffer via a function which takes them all as separate arguments. It would be simpler if the property code could easily copy all the framebuffer's current settings, update them with the new specified values and then ask the framebuffer to switch to the new set. As the first part of this refactoring, pull all the fb config settings fields in BCM2835FBState out into their own struct. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180814144436.679-2-peter.maydell@linaro.org
2018-08-23Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2-1/+3
* x86 TCG fixes for 64-bit call gates (Andrew) * qumu-guest-agent freeze-hook tweak (Christian) * pm_smbus improvements (Corey) * Move validation to pre_plug for pc-dimm (David) * Fix memory leaks (Eduardo, Marc-André) * synchronization profiler (Emilio) * Convert the CPU list to RCU (Emilio) * LSI support for PPR Extended Message (George) * vhost-scsi support for protection information (Greg) * Mark mptsas as a storage device in the help (Guenter) * checkpatch tweak cherry-picked from Linux (me) * Typos, cleanups and dead-code removal (Julia, Marc-André) * qemu-pr-helper support for old libmultipath (Murilo) * Annotate fallthroughs (me) * MemoryRegionOps cleanup (me, Peter) * Make s390 qtests independent from libqos, which doesn't actually support it (me) * Make cpu_get_ticks independent from BQL (me) * Introspection fixes (Thomas) * Support QEMU_MODULE_DIR environment variable (ryang) # gpg: Signature made Thu 23 Aug 2018 17:46:30 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (69 commits) KVM: cleanup unnecessary #ifdef KVM_CAP_... target/i386: update MPX flags when CPL changes i2c: pm_smbus: Add the ability to force block transfer enable i2c: pm_smbus: Don't delay host status register busy bit when interrupts are enabled i2c: pm_smbus: Add interrupt handling i2c: pm_smbus: Add block transfer capability i2c: pm_smbus: Make the I2C block read command read-only i2c: pm_smbus: Fix the semantics of block I2C transfers i2c: pm_smbus: Clean up some style issues pc-dimm: assign and verify the "addr" property during pre_plug pc: drop memory region alignment check for 0 util/oslib-win32: indicate alignment for qemu_anon_ram_alloc() pc-dimm: assign and verify the "slot" property during pre_plug ipmi: Use proper struct reference for BT vmstate vhost-scsi: expose 't10_pi' property for VIRTIO_SCSI_F_T10_PI vhost-scsi: unify vhost-scsi get_features implementations vhost-user-scsi: move host_features into VHostSCSICommon cpus: allow cpu_get_ticks out of BQL cpus: protect TimerState writes with a spinlock seqlock: add QemuLockable support ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-23fix "Missing break in switch" coverity reportsPaolo Bonzini2-1/+3
Many of these are marked as "intentional/fix required" because they just need adding a fall through comment. This is exactly what this patch does, except for target/mips/translate.c where it is easier to duplicate the code, and hw/audio/sb16.c where I consulted the DOSBox sources and decide to just remove the LOG_UNIMP before the fallthrough. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-21hw/display/vga-isa-mm: Convert away from old_mmioPeter Maydell1-47/+13
Convert the vga-isa-mm device away from the old_mmio MemoryRegion accessors. This device is only used by the MIPS 'jazz' boards "magnum" and "pica61". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Tested-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 20180802155147.1863-2-peter.maydell@linaro.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-08-21qxl: drop unused generation variableGerd Hoffmann2-2/+0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180810132236.25908-1-kraxel@redhat.com
2018-08-21hw/display/ramfb: Compile the ramfb code only when CONFIG_FW_CFG_DMA is setThomas Huth1-2/+2
According to the ramfb_setup() function, the ramfb device needs fw_cfg with DMA, so we should also only compile and link it into those targets which support it, to avoid that the device shows up on systems where it can not be used at all (e.g. s390x). Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1534786083-26559-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-08-07virtio-gpu: fix crashes upon warm reboot with vga modeMarc-André Lureau2-0/+16
With vga=775 on the Linux command line a first boot of the VM running Linux works fine. After a warm reboot it crashes during Linux boot. Before that, valgrind points out bad memory write to console surface. The VGA code is not aware that virtio-gpu got a message surface scanout when the display is disabled. Let's reset VGA graphic mode when it is the case, so that a new display surface is created when doing further VGA operations. https://bugs.launchpad.net/qemu/+bug/1784900/ Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Message-id: 20180803153235.4134-1-marcandre.lureau@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-17hw/display/xlnx_dp: Move problematic code from instance_init to realizePaolo Bonzini1-1/+7
aux_create_slave() calls qdev_init_nofail() which in turn "realizes" the corresponding object. This is unlike qdev_create(), and it is wrong because qdev_init_nofail() must not be called from an instance_init function. Move qdev_init_nofail() and the subsequent aux_map_slave into the caller's realize function. There are two more bugs that needs to be fixed here, too, where the objects are created but not added as children. Therefore when you call object_unparent on them, nothing happens. In particular dpcd and edid give you an infinite loop in bus_unparent, because device_unparent is not called and does not remove them from the list of devices on the bus. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1531745974-17187-17-git-send-email-thuth@redhat.com [thuth: Added Paolo's fixup for the dpcd and edid unparenting] Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-16sm501: Fix warning about unreachable codeBALATON Zoltan1-1/+1
Coverity warned that the false arm of conditional expression is unreachable when it is inside an if with the same condition. Remove the unreachable code to avoid the warning. Fixes: CID 1394215 Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-16sm501: Update screen on frame buffer address changeBALATON Zoltan1-0/+2
When the guest changes the address of the frame buffer we need to refresh the screen to correctly display the new content. This fixes display update problems when changing between screens on AmigaOS. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-07sm501: Set updated region dirty after 2D operationBALATON Zoltan1-2/+15
Set the changed memory region dirty after performed a 2D operation to ensure that the screen is updated properly. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-07sm501: Fix support for non-zero frame buffer start addressBALATON Zoltan1-3/+16
Display updates and drawing hardware cursor did not work when frame buffer address was non-zero. Fix this by taking the frame buffer address into account in these cases. This fixes screen dragging on AmigaOS. Based on patch by Sebastian Bauer. Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-07sm501: Log unimplemented raster operation modesSebastian Bauer1-0/+23
The sm501 currently implements only a very limited set of raster operation modes. After this change, unknown raster operation modes are logged so these can be easily spotted. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-07sm501: Implement negated destination raster operation modeSebastian Bauer1-1/+11
Add support for the negated destination operation mode. This is used e.g. by AmigaOS for the INVERSEVID drawing mode. With this change, the cursor in the shell and non-immediate window adjustment are working now. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-07sm501: Use values from the pitch register for 2D operationsSebastian Bauer1-2/+2
Before, crt_h_total was used for src_width and dst_width. This is a property of the current display setting and not relevant for the 2D operation that also can be done off-screen. The pitch register's purpose is to describe line pitch relevant of the 2D operation. Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-07sm501: Perform a full update after palette changeSebastian Bauer1-0/+8
Changing the palette of a color index has as an immediate effect on all pixels with the corresponding index on real hardware. Performing a full update after a palette change is a simple way to emulate this effect. Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-07sm501: Implement i2c part for reading monitor EDIDBALATON Zoltan1-4/+143
Emulate the i2c part of SM501 which is used to access the EDID info from a monitor. The vmstate structure is changed and its version is increased but SM501 is only used on SH and PPC sam460ex machines that don't support cross-version migration. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180703-pull-request' ↵Peter Maydell10-32/+68
into staging vga: disable global_vmstate, virtio-gpu scanout tracking fixes. # gpg: Signature made Tue 03 Jul 2018 10:44:56 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20180703-pull-request: vga: disable global_vmstate for 3.0+ machine types virtio-gpu: disable scanout when backing resource is destroyed virtio-gpu: update old resource too. virtio-gpu: tweak scanout disable. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/display/qxl.c # hw/display/vga-isa-mm.c
2018-07-03vga: disable global_vmstate for 3.0+ machine typesGerd Hoffmann9-13/+23
Move global_vmstate from vga_common_init() parameter to VGACommonState field. Set global_vmstate to true for isa vga devices, so nothing changes here. virtio-vga and secondary-vga already set global_vmstate to false so no change here either. All other pci vga devices get a new global-vmstate property, defaulting to false. A compat property flips it to true for older machine types. With this in place you don't get a vmstate section naming conflict any more when adding multiple pci vga devices to your vm. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20180702163345.17892-1-kraxel@redhat.com>
2018-07-03virtio-gpu: disable scanout when backing resource is destroyedGerd Hoffmann1-0/+10
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20180702162443.16796-4-kraxel@redhat.com
2018-07-03virtio-gpu: update old resource too.Gerd Hoffmann1-1/+6
When switching scanout from one resource to another we must update the scanout_bitmask field for both new (set bit) and old (clear bit) resource. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20180702162443.16796-3-kraxel@redhat.com
2018-07-03virtio-gpu: tweak scanout disable.Gerd Hoffmann1-18/+29
- Factor out the code to virtio_gpu_disable_scanout(). - Allow disable scanout 0, show a message then. - Clear scanout->resource_id. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20180702162443.16796-2-kraxel@redhat.com
2018-07-02Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell10-43/+46
* IEC units series (Philippe) * Hyper-V PV TLB flush (Vitaly) * git archive detection (Daniel) * host serial passthrough fix (David) * NPT support for SVM emulation (Jan) * x86 "info mem" and "info tlb" fix (Doug) # gpg: Signature made Mon 02 Jul 2018 16:18:21 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (50 commits) tcg: simplify !CONFIG_TCG handling of tb_invalidate_* i386/monitor.c: make addresses canonical for "info mem" and "info tlb" target-i386: Add NPT support serial: Open non-block bsd-user: Use the IEC binary prefix definitions linux-user: Use the IEC binary prefix definitions tests/crypto: Use the IEC binary prefix definitions vl: Use the IEC binary prefix definitions monitor: Use the IEC binary prefix definitions cutils: Do not include "qemu/units.h" directly hw/rdma: Use the IEC binary prefix definitions hw/virtio: Use the IEC binary prefix definitions hw/vfio: Use the IEC binary prefix definitions hw/sd: Use the IEC binary prefix definitions hw/usb: Use the IEC binary prefix definitions hw/net: Use the IEC binary prefix definitions hw/i386: Use the IEC binary prefix definitions hw/ppc: Use the IEC binary prefix definitions hw/mips: Use the IEC binary prefix definitions hw/mips/r4k: Constify params_size ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-02ramfb: enable vgabiosGerd Hoffmann1-0/+1
Add vgabios binary to fw_cfg vgaroms. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-07-02bochs-display: enable vgabiosGerd Hoffmann1-0/+1
Add vgabios binary to pci rom bar. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-07-02hw/display: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé9-35/+38
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20180625124238.25339-15-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw: Directly use "qemu/units.h" instead of "qemu/cutils.h"Philippe Mathieu-Daudé1-1/+1
These files don't use anything exposed by "qemu/cutils.h", simplify preprocessing including directly "qemu/units.h". Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts) Message-Id: <20180625124238.25339-7-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-02hw: Use IEC binary prefix definitions from "qemu/units.h"Philippe Mathieu-Daudé1-7/+7
Code change produced with: $ git ls-files | egrep '\.[ch]$' | \ xargs sed -i -e 's/\(\W[KMGTPE]\)_BYTE/\1iB/g' Suggested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts) Message-Id: <20180625124238.25339-6-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-27compiler: add a sizeof_field() macroStefan Hajnoczi1-2/+2
Determining the size of a field is useful when you don't have a struct variable handy. Open-coding this is ugly. This patch adds the sizeof_field() macro, which is similar to typeof_field(). Existing instances are updated to use the macro. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20180614164431.29305-1-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-26ramfb: fix overflowGerd Hoffmann1-2/+2
> CID 1393621: (OVERFLOW_BEFORE_WIDEN) > Potentially overflowing expression "stride * s->height" with type "unsigned > int" (32 bits, unsigned) is evaluated using +32-bit arithmetic, and then used > in a context that expects an expression of type "hwaddr" (64 bits, unsigned). Fix by changing stride from uint32_t to hwaddr. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180626083120.19515-1-kraxel@redhat.com
2018-06-26vga: set owner for mmio regionsGerd Hoffmann3-6/+8
This makes sure the regions are properly cleaned when unplugging -device seconday-vga. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Thomas Huth <thuth@redhat.com> Message-id: 20180626060941.8326-1-kraxel@redhat.com
2018-06-21sm501: Fix hardware cursor color conversionSebastian Bauer1-3/+3
According to the sm501 specs the hardware cursor colors are to be given in the rgb565 format, but the code currently interprets them as bgr565. Therefore, the colors of the hardware cursors are wrong in the QEMU display, e.g., the standard mouse pointer of AmigaOS appears blue instead of red. This change fixes this issue by replacing the existing naive bgr565 => rgb888 conversion with a standard rgb565 => rgb888 one that also scales the color component values properly. Signed-off-by: Sebastian Bauer <mail@sebastianbauer.info> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-19Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180618-pull-request' ↵Peter Maydell3-0/+160
into staging vga: add ramfb, print virglrenderer version # gpg: Signature made Mon 18 Jun 2018 10:57:38 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20180618-pull-request: Add ramfb MAINTAINERS entry hw/display: add standalone ramfb device hw/display: add ramfb, a simple boot framebuffer living in guest ram configure: print virglrenderer version Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-18hw/display: add standalone ramfb deviceGerd Hoffmann2-0/+63
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20180613122948.18149-3-kraxel@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-18hw/display: add ramfb, a simple boot framebuffer living in guest ramGerd Hoffmann2-0/+97
The boot framebuffer is expected to be configured by the firmware, so it uses fw_cfg as interface. Initialization goes as follows: (1) Check whenever etc/ramfb is present. (2) Allocate framebuffer from RAM. (3) Fill struct RAMFBCfg, write it to etc/ramfb. Done. You can write stuff to the framebuffer now, and it should appear automagically on the screen. Note that this isn't very efficient because it does a full display update on each refresh. No dirty tracking. Dirty tracking would have to be active for the whole ram slot, so that wouldn't be very efficient either. For a boot display which is active for a short time only this isn't a big deal. As permanent guest display something better should be used (if possible). This is the ramfb core code. Some windup is needed for display devices which want have a ramfb boot display. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20180613122948.18149-2-kraxel@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-16sm501: Do not clear read only bits when writing registersBALATON Zoltan1-6/+9
When writing registers that have read only bits we have to avoid changing these bits as they may have non zero values. Make sure we use the correct masks to mask out read only and reserved bits when changing registers. Also remove extra spaces from dram_control and arbitration_control assignments. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-12object: fix OBJ_PROP_LINK_UNREF_ON_RELEASE ambivalenceMarc-André Lureau1-1/+1
A link property can be set during creation, with object_property_add_link() and later with object_property_set_link(). add_link() doesn't add a reference to the target object, while set_link() does. Furthemore, OBJ_PROP_LINK_UNREF_ON_RELEASE flags, set during add_link, says whether a reference must be released when the property is destroyed. This can lead to leaks if the property was later set_link(), as the added reference is never released. Instead, rename OBJ_PROP_LINK_UNREF_ON_RELEASE to OBJ_PROP_LINK_STRONG and use that has an indication on how the link handle reference management in set_link(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20180531195119.22021-3-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-08xilinx-dp: Add trailing '\n' to qemu_log() callPhilippe Mathieu-Daudé1-1/+3
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180606152128.449-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04Merge remote-tracking branch 'remotes/kraxel/tags/vga-20180604-pull-request' ↵Peter Maydell2-17/+20
into staging Two little vga fixes. # gpg: Signature made Mon 04 Jun 2018 09:48:53 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20180604-pull-request: vga: cleanup surface handling bochs-display: add missing break Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-1/+1
acpi, vhost, misc: fixes, features vDPA support, fix to vhost blk RO bit handling, some include path cleanups, NFIT ACPI table. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 01 Jun 2018 17:25:19 BST # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (31 commits) vhost-blk: turn on pre-defined RO feature bit ACPI testing: test NFIT platform capabilities nvdimm, acpi: support NFIT platform capabilities tests/.gitignore: add entry for generated file arch_init: sort architectures ui: use local path for local headers qga: use local path for local headers colo: use local path for local headers migration: use local path for local headers usb: use local path for local headers sd: fix up include vhost-scsi: drop an unused include ppc: use local path for local headers rocker: drop an unused include e1000e: use local path for local headers ioapic: fix up includes ide: use local path for local headers display: use local path for local headers trace: use local path for local headers migration: drop an unused include ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-04vga: cleanup surface handlingGerd Hoffmann1-17/+19
Just set the full_update flag if we need a new DisplaySurface. Create a new surface when the flag is set instead of having two places where qemu_create_displaysurface_from() is called. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180525131318.28437-1-kraxel@redhat.com
2018-06-04bochs-display: add missing breakGerd Hoffmann1-0/+1
Fixes: CID 1391291 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180525045344.28347-1-kraxel@redhat.com
2018-06-01display: use local path for local headersMichael S. Tsirkin1-1/+1
When pulling in headers that are in the same directory as the C file (as opposed to one in include/), we should use its relative path, without a directory. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2018-06-01hw: make virtio devices configurable via default-configs/Paolo Bonzini1-2/+2
This is only half of the work, because the proxy devices (virtio-*-pci, virtio-*-ccw, etc.) are still included unconditionally. It is still a move in the right direction. Based-on: <20180522194943.24871-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::initPhilippe Mathieu-Daudé1-5/+4
I2CSlaveClass::init is no more used, remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-3-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-3-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw: Do not include "sysemu/block-backend.h" if it is not necessaryPhilippe Mathieu-Daudé1-1/+0
Remove those unneeded includes to speed up the compilation process a little bit. (Continue 7eceff5b5a1fa cleanup) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-13-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2025-02-15 03:16:07 +0000