aboutsummaryrefslogtreecommitdiff
path: root/hw/display/vga_int.h
AgeCommit message (Collapse)AuthorFilesLines
2022-11-10display: include dependencies explicitlyMichael S. Tsirkin1-1/+0
acpi-vga-stub.c pulls in vga_int.h However that currently pulls in ui/console.h which breaks e.g. on systems without pixman. It's better to remove ui/console.h from vga_int.h and directly include it where it's used. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20221109222112.74519-1-mst@redhat.com> Tested-by: Laurent Vivier <lvivier@redhat.com> Reported-by: Miroslav Rezanina <mrezanin@redhat.com> Reported-by: Frederic Bezies <fredbezies@gmail.com> Reported-by: Laurent Vivier <lvivier@redhat.com> Fixes: cfead31326 ("AcpiDevAmlIf interface to build VGA device descs") Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-11-07acpi: pc: vga: use AcpiDevAmlIf interface to build VGA device descriptorsIgor Mammedov1-0/+2
NB: We do not expect any functional change in any ACPI tables with this change. It's only a refactoring. NB2: Some targets (or1k) do not support acpi and CONFIG_ACPI is off for them. However, modules are reused between all architectures so CONFIG_ACPI is on. For those architectures, dummy stub function definitions help to resolve symbols. This change uses more of these and so it adds a couple of dummy stub definitions so that symbols for those can be resolved. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20221017102146.2254096-2-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ani Sinha <ani@anisinha.ca> CC: Bernhard Beschow <shentey@gmail.com> Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20221107152744.868434-1-ani@anisinha.ca>
2022-03-18hw/display: Allow vga_common_init() to return errorsThomas Huth1-1/+1
The vga_common_init() function currently cannot report errors to its caller. But in the following patch, we'd need this possibility, so let's change it to take an "Error **" as parameter for this. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220317083027.16688-3-thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-12-18vga: cleanup mapping of VRAM for non-PCI VGAPaolo Bonzini1-3/+0
vga_init_vbe is now used only from ISA VGA cards. Since the alias is not needed anymore, remove it (effectively reverting commit 8294a64d7f, "vga: fix vram double-mapping with -vga std and -M pc-0.12", 2012-05-29) and the now unused vbe_mapped field of VGACommonState. The function now consists of a single memory_region_add_subregion call, so we can inline it; this avoids incorrect usage from PCI cards. Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Based-on: <05af415a-5058-98b4-4a12-9d093a30b1e3@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-29vga_int: remove unused function protypeyuchenlin1-1/+0
Signed-off-by: yuchenlin <yuchenlin@synology.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181022080053.9379-1-yuchenlin@synology.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-27display/stdvga: add edid support.Gerd Hoffmann1-1/+1
This patch adds edid support to the qemu stdvga. It is turned off by default and can be enabled with the new edid property. The patch also adds xres and yres properties to specify the video mode you want the guest use. Works only with edid enabled and updated guest driver. The mmio bar of the stdvga has some unused address space at the start. It was reserved just in case it'll be needed for virtio, but it turned out to not be needed for that. So let's use that region to place the EDID data block there. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180925075646.25114-6-kraxel@redhat.com
2018-07-03vga: disable global_vmstate for 3.0+ machine typesGerd Hoffmann1-1/+2
Move global_vmstate from vga_common_init() parameter to VGACommonState field. Set global_vmstate to true for isa vga devices, so nothing changes here. virtio-vga and secondary-vga already set global_vmstate to false so no change here either. All other pci vga devices get a new global-vmstate property, defaulting to false. A compat property flips it to true for older machine types. With this in place you don't get a vmstate section naming conflict any more when adding multiple pci vga devices to your vm. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-Id: <20180702163345.17892-1-kraxel@redhat.com>
2018-06-26vga: set owner for mmio regionsGerd Hoffmann1-0/+1
This makes sure the regions are properly cleaned when unplugging -device seconday-vga. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Thomas Huth <thuth@redhat.com> Message-id: 20180626060941.8326-1-kraxel@redhat.com
2018-05-24vga: move bochs vbe defines to header fileGerd Hoffmann1-33/+2
Create a new header file, move the bochs vbe dispi interface defines to it, so they can be used outside vga code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20180522165058.15404-2-kraxel@redhat.com
2017-12-18hw/display/vga: "vga_int.h" requires "ui/console.h"Philippe Mathieu-Daudé1-1/+2
since The VGACommonState struct has a GraphicHwOps *hw_ops member, then remove the now unnecessary includes. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-09-01vga: stop passing pointers to vga_draw_line* functionsGerd Hoffmann1-0/+1
Instead pass around the address (aka offset into vga memory). Add vga_read_* helper functions which apply vbe_size_mask to the address, to make sure the address stays within the valid range, similar to the cirrus blitter fixes (commits ffaf857778 and 026aeffcb4). Impact: DoS for privileged guest users. qemu crashes with a segfault, when hitting the guard page after vga memory allocation, while reading vga memory for display updates. Fixes: CVE-2017-13672 Cc: P J P <ppandit@redhat.com> Reported-by: David Buchanan <d@vidbuchanan.co.uk> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170828122906.18993-1-kraxel@redhat.com
2016-07-12Clean up decorations and whitespace around header guardsMarkus Armbruster1-1/+2
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Use #include "..." for our own headers, <...> for othersMarkus Armbruster1-1/+1
Tracked down with an ugly, brittle and probably buggy Perl script. Also move includes converted to <...> up so they get included before ours where that's obviously okay. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-05-23vga: add sr_vbe register setGerd Hoffmann1-0/+1
Commit "fd3c136 vga: make sure vga register setup for vbe stays intact (CVE-2016-3712)." causes a regression. The win7 installer is unhappy because it can't freely modify vga registers any more while in vbe mode. This patch introduces a new sr_vbe register set. The vbe_update_vgaregs will fill sr_vbe[] instead of sr[]. Normal vga register reads and writes go to sr[]. Any sr register read access happens through a new sr() helper function which will read from sr_vbe[] with vbe active and from sr[] otherwise. This way we can allow guests update sr[] registers as they want, without allowing them disrupt vbe video modes that way. Cc: qemu-stable@nongnu.org Reported-by: Thomas Lamprecht <thomas@lamprecht.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1463475294-14119-1-git-send-email-kraxel@redhat.com
2016-02-23all: Clean up includesPeter Maydell1-1/+0
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-12virtio-vga: add virtio gpu device with vga compatibilityGerd Hoffmann1-0/+6
This patch adds a virtio-vga device. It is simliar to virtio-gpu-pci, but it also adds in vga compatibility, so guests without native virtio-gpu support can drive the device in vga mode. It is compatible with stdvga. Written by Dave Airlie and Gerd Hoffmann. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-12-16move hw cursor pos from cirrus to vgaGerd Hoffmann1-0/+2
2014-12-16vga: Add mechanism to force the use of a shadow surfaceBenjamin Herrenschmidt1-0/+1
This prevents surface sharing which will be necessary to fix cirrus HW cursor support. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-30vga: Add endian to vmstateBenjamin Herrenschmidt1-0/+2
Include the endian state in the migration stream as an optional subsection which we only include when the endian isn't the default, thus enabling backward compatibility of the common case. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Changes by kraxel: * Remove bochs dispi interface changes. We'll do that in a different way to make sure we don't conflict with possible future bochs dispi interface changes. * keep live migration bits. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2014-09-30vga: Make fb endian a common state variableBenjamin Herrenschmidt1-0/+1
And initialize it based on target endian Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2014-09-30vga: Remove rgb_to_pixel indirectionBenjamin Herrenschmidt1-2/+0
We always use rgb_to_pixel32 nowadays. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2014-09-04vbe: make bochs dispi interface return the correct memory size with qxlGerd Hoffmann1-0/+1
VgaState->vram_size is the size of the pci bar. In case of qxl not the whole pci bar can be used as vga framebuffer. Add a new variable vbe_size to handle that case. By default (if unset) it equals vram_size, but qxl can set vbe_size to something else. This makes sure VBE_DISPI_INDEX_VIDEO_MEMORY_64K returns correct results and sanity checks are done with the correct size too. Cc: qemu-stable@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-08-17vga: do not dynamically allocate chain4_aliasPaolo Bonzini1-1/+2
Instead, add a boolean variable to indicate the presence of the region. This avoids a repeated malloc/free (later we can also avoid the add_child/unparent by changing the offset/size of the alias). Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-05PortioList: Store PortioList in device stateKirill Batuzov1-0/+2
PortioList is an abstraction used for construction of MemoryRegionPortioList from MemoryRegionPortio. It can be used later to unmap created memory regions. It also requires proper cleanup because some of the memory inside is allocated dynamically. By moving PortioList ot device state we make it possible to cleanup later and avoid leaking memory. This change spans several target platforms. The following testcases cover all changed lines: qemu-system-ppc -M prep qemu-system-i386 -vga qxl qemu-system-i386 -M isapc -soundhw adlib -device ib700,id=watchdog0,bus=isa.0 Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-04-28vga: allow non-global vmstateGerd Hoffmann1-1/+1
Need a way to opt-out from vga.vram being global vmstate, for secondary vga cards. Add a bool parameter to vga_common_init to support this. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-07-04vga: pass owner to vga_init_ioPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04vga: pass owner to vga_init_vbePaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04vga: pass owner to vga_common_initPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04vga: pass owner to vga_initPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-16console: add GraphicHwOpsGerd Hoffmann1-3/+1
Pass a single GraphicHwOps struct pointer to graphic_console_init, instead of a bunch of function pointers. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16console: simplify screendumpGerd Hoffmann1-2/+0
Screendumps are alot simpler as we can update non-active QemuConsoles now. So we only need to update the QemuConsole we want write out, then dump the DisplaySurface content into a ppm file. Done. No console switching needed. No special support code in the gfx card emulation needed. Zap it all. Also move ppm_save out of the vga code and next to the qmp_screendump function. For now screen dumping is limited to console #0 (like it used to be), even though it is dead simple to extend it to other consoles. I wanna finish the console cleanup before setting new qapi interfaces into stone. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
2013-04-16console: rename vga_hw_*, add QemuConsole paramGerd Hoffmann1-4/+4
Add QemuConsole parameter to vga_hw_*, so the interface allows to update non-active consoles (the actual code can't handle this yet, see next patch). Passing NULL is allowed and updates the active console, like the functions do today. While touching all vga_hw_* calls anyway rename that to the functions to hardware-neutral graphics_hw_* Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-08hw: move private headers to hw/ subdirectories.Paolo Bonzini1-0/+218
Many headers are used only in a single directory. These can be kept in hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2025-01-18 12:44:47 +0000