aboutsummaryrefslogtreecommitdiff
path: root/hw/cxl/cxl-mailbox-utils.c
AgeCommit message (Collapse)AuthorFilesLines
2023-11-15hw/cxl: spelling fixes: limitaions, potentialy, intializedMichael Tokarev1-1/+1
Fixes: 388d6b574e28 "hw/cxl: Use switch statements for read and write of cachemem registers" Fixes: 3314efd276ad "hw/cxl/mbox: Add Physical Switch Identify command." Fixes: 004e3a93b814 "hw/cxl: Add tunneled command support to mailbox for switch cci." Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-11-07hw/cxl: Add tunneled command support to mailbox for switch cci.Jonathan Cameron1-0/+162
This implementation of tunneling makes the choice that our Type 3 device is a Logical Device (LD) of a Multi-Logical Device (MLD) that just happens to only have one LD for now. Tunneling is supported from a Switch Mailbox CCI (and shortly via MCTP over I2C connected to the switch MCTP CCI) via an outer level to the FM owned LD in the MLD Type 3 device. From there an inner tunnel may be used to access particular LDs. Protocol wise, the following is what happens in a real system but we don't emulate the transports - just the destinations and the payloads. ( Host -> Switch Mailbox CCI - in band FM-API mailbox command or Host -> Switch MCTP CCI - MCTP over I2C using the CXL FM-API MCTP Binding. ) then (if a tunnel command) Switch -> Type 3 FM Owned LD - MCTP over PCI VDM using the CXL FM-API binding (addressed by switch port) then (if unwrapped command also a tunnel command) Type 3 FM Owned LD to LD0 via internal transport (addressed by LD number) or (added shortly) Host to Type 3 FM Owned MCTP CCI - MCTP over I2C using the CXL FM-API MCTP Binding. then (if unwrapped comand is a tunnel comamnd) Type 3 FM Owned LD to LD0 via internal transport. (addressed by LD number) It is worth noting that the tunneling commands over PCI VDM presumably use the appropriate MCTP binding depending on opcode. This may be the CXL FMAPI binding or the CXL Memory Device Binding. Additional commands will need to be added to make this useful beyond testing the tunneling works. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-18-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl: Add dummy security state getJonathan Cameron1-0/+17
Needed to allow the santize comamnds to be tested with proposed Linux Kernel support. Default value + no control of the security state will work for now. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-17-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Add Get Background Operation Status CommandJonathan Cameron1-0/+33
For now, provide this command on type 3 main mailbox only. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-15-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl: Add support for device sanitationDavidlohr Bueso1-0/+140
Make use of the background operations through the sanitize command, per CXL 3.0 specs. Traditionally run times can be rather long, depending on the size of the media. Estimate times based on: https://pmem.io/documents/NVDIMM_DSM_Interface-V1.8.pdf Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-14-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Wire up interrupts for background completionDavidlohr Bueso1-17/+14
Notify when the background operation is done. Note that for now background commands are only supported on the main Type 3 mailbox. Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-13-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Add support for background operationsDavidlohr Bueso1-1/+91
Support background commands in the mailbox, and update cmd_infostat_bg_op_sts() accordingly. This patch does not implement mbox interrupts upon completion, so the kernel driver must rely on polling to know when the operation is done. Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-12-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl: Implement Physical Ports status retrievalJonathan Cameron1-0/+128
Add this command for both the Switch CCI in switch upstream ports. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-11-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Add Physical Switch Identify command.Jonathan Cameron1-0/+65
Enable it for the switch CCI. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-9-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Add Information and Status / Identify commandJonathan Cameron1-0/+55
Add this command that is only available via out of band CCIs. It replicates information that can be discovered inband via PCI config space. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-8-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl: Add a switch mailbox CCI functionJonathan Cameron1-0/+18
CXL switch CCIs were added in CXL r3.0. They are a PCI function, identified by class code that provides a CXL mailbox (identical to that previously defined for CXL type 3 memory devices) over which various FM-API commands may be used. Whilst the intent of this feature is enable switch control from a BMC attached to a switch upstream port, it is also useful to allow emulation of this feature on the upstream port connected to a host using the CXL devices as this greatly simplifies testing. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-7-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Generalize the CCI command processingJonathan Cameron1-41/+10
By moving the parts of the mailbox command handling that are CCI type specific out to the caller, make the main handling code generic. Rename it to cxl_process_cci_message() to reflect this new generality. Change the type3 mailbox handling (reused shortly for the switch mailbox CCI) to take a snapshot of the mailbox input data rather than operating on it in place. This reduces the chance of bugs due to aliasing going forwars. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Pull the CCI definition out of the CXLDeviceStateJonathan Cameron1-37/+57
Enables having multiple CCIs per devices. Each CCI (mailbox) has it's own state and command list, so they can't share a single structure. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-4-Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Split mailbox command payload into separate input and outputJonathan Cameron1-95/+135
New CCI types that will be supported shortly do not have a single buffer used in both directions. As such, split it up. To avoid the complexities of implementing all commands to handle potential aliasing, take a copy of the input before use. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-3-Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl/mbox: Pull the payload out of struct cxl_cmd and make instances constantJonathan Cameron1-56/+65
Putting the pointer in the structure for command handling puts a single variable element inside an otherwise constant structure. Move it out as a directly passed variable and take the cxl_cmd structures constant. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Message-Id: <20231023160806.13206-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-11-07hw/cxl: Line length reductionsJonathan Cameron1-7/+14
Michael Tsirkin observed that there were some unnecessarily long lines in the CXL code in a recent review. This patch is intended to rectify that where it does not hurt readability. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Fan Ni <fan.ni@samsung.com> Message-Id: <20231023140210.3089-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-09-21hw/other: spelling fixesMichael Tokarev1-2/+2
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-22hw/cxl/events: Add event interrupt supportIra Weiny1-21/+85
Replace the stubbed out CXL Get/Set Event interrupt policy mailbox commands. Enable those commands to control interrupts for each of the event log types. Skip the standard input mailbox length on the Set command due to DCD being optional. Perform the checks separately. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230530133603.16934-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl/events: Wire up get/clear event mailbox commandsIra Weiny1-2/+38
CXL testing is benefited from an artificial event log injection mechanism. Add an event log infrastructure to insert, get, and clear events from the various logs available on a device. Replace the stubbed out CXL Get/Clear Event mailbox commands with commands that operate on the new infrastructure. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230530133603.16934-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl: Move CXLRetCode definition to cxl_device.hJonathan Cameron1-28/+0
Following patches will need access to the mailbox return code type so move it to the header. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230530133603.16934-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl: Add clear poison mailbox command support.Jonathan Cameron1-0/+82
Current implementation is very simple so many of the corner cases do not exist (e.g. fragmenting larger poison list entries) Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230526170010.574-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl: Add poison injection via the mailbox.Jonathan Cameron1-0/+42
Very simple implementation to allow testing of corresponding kernel code. Note that for now we track each 64 byte section independently. Whilst a valid implementation choice, it may make sense to fuse entries so as to prove out more complex corners of the kernel code. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230526170010.574-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-06-22hw/cxl: QMP based poison injection supportJonathan Cameron1-0/+90
Inject poison using QMP command cxl-inject-poison to add an entry to the poison list. For now, the poison is not returned CXL.mem reads, but only via the mailbox command Get Poison List. So a normal memory read to an address that is on the poison list will not yet result in a synchronous exception (and similar for partial cacheline writes). That is left for a future patch. See CXL rev 3.0, sec 8.2.9.8.4.1 Get Poison list (Opcode 4300h) Kernel patches to use this interface here: https://lore.kernel.org/linux-cxl/cover.1665606782.git.alison.schofield@intel.com/ To inject poison using QMP (telnet to the QMP port) { "execute": "qmp_capabilities" } { "execute": "cxl-inject-poison", "arguments": { "path": "/machine/peripheral/cxl-pmem0", "start": 2048, "length": 256 } } Adjusted to select a device on your machine. Note that the poison list supported is kept short enough to avoid the complexity of state machine that is needed to handle the MORE flag. Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230526170010.574-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19hw/cxl: Introduce cxl_device_get_timestamp() utility functionIra Weiny1-10/+1
There are new users of this functionality coming shortly so factor it out from the GET_TIMESTAMP mailbox command handling. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230423162013.4535-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19hw/cxl: rename mailbox return code type from ret_code to CXLRetCodeJonathan Cameron1-32/+32
Given the increasing usage of this mailbox return code type, now is a good time to switch to QEMU style naming. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230423162013.4535-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-05-19hw/cxl: Multi-Region CXL Type-3 Devices (Volatile and Persistent)Gregory Price1-14/+18
This commit enables each CXL Type-3 device to contain one volatile memory region and one persistent region. Two new properties have been added to cxl-type3 device initialization: [volatile-memdev] and [persistent-memdev] The existing [memdev] property has been deprecated and will default the memory region to a persistent memory region (although a user may assign the region to a ram or file backed region). It cannot be used in combination with the new [persistent-memdev] property. Partitioning volatile memory from persistent memory is not yet supported. Volatile memory is mapped at DPA(0x0), while Persistent memory is mapped at DPA(vmem->size), per CXL Spec 8.2.9.8.2.0 - Get Partition Info. Signed-off-by: Gregory Price <gregory.price@memverge.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Fan Ni <fan.ni@samsung.com> Tested-by: Fan Ni <fan.ni@samsung.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230421160827.2227-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-02hw/cxl/mailbox: Use new UUID network order define for cel_uuidIra Weiny1-7/+6
The cel_uuid was programatically generated previously because there was no static initializer for network order UUIDs. Use the new network order initializer for cel_uuid. Adjust cxl_initialize_mailbox() because it can't fail now. Update specification reference. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Gregory Price <gregory.price@memverge.com> Tested-by: Gregory Price <gregory.price@memverge.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230206172816.8201-11-Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-02hw/cxl: Add CXL_CAPACITY_MULTIPLIER definitionGregory Price1-6/+9
Remove usage of magic numbers when accessing capacity fields and replace with CXL_CAPACITY_MULTIPLIER, matching the kernel definition. Signed-off-by: Gregory Price <gregory.price@memverge.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230206172816.8201-5-Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-17hw/cxl: Correctly handle variable sized mailbox input payloads.Jonathan Cameron1-1/+1
A placeholder of ~0 is used to indicate variable payload size. Whilst the checks for output payload correctly took this into account, those for input payload did not. This results in failure of the Set LSA command. Fixes: 464e14ac43 ("hw/cxl/device: Implement basic mailbox (8.2.8.4)") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220817145759.32603-4-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-17hw/cxl: Fix Get LSA input payload size which should be 8 bytes.Jonathan Cameron1-1/+1
Get LSA needs 4 byte offset and 4 byte length arguments. CXL rev 2.0 Table 178. Fixes: 3ebe676a34 ("hw/cxl/device: Implement get/set Label Storage Area (LSA)") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220817145759.32603-3-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13hw/cxl/device: Implement get/set Label Storage Area (LSA)Ben Widawsky1-0/+60
Implement get and set handlers for the Label Storage Area used to hold data describing persistent memory configuration so that it can be ensured it is seen in the same configuration after reboot. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-22-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13hw/cxl/device: Plumb real Label Storage Area (LSA) sizingBen Widawsky1-0/+3
This should introduce no change. Subsequent work will make use of this new class member. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-21-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13hw/cxl/device: Add some trivial commandsBen Widawsky1-0/+69
GET_FW_INFO and GET_PARTITION_INFO, for this emulation, is equivalent to info already returned in the IDENTIFY command. To have a more robust implementation, add those. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-20-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13hw/cxl/device: Add a memory device (8.2.8.5)Ben Widawsky1-0/+46
A CXL memory device (AKA Type 3) is a CXL component that contains some combination of volatile and persistent memory. It also implements the previously defined mailbox interface as well as the memory device firmware interface. Although the memory device is configured like a normal PCIe device, the memory traffic is on an entirely separate bus conceptually (using the same physical wires as PCIe, but different protocol). Once the CXL topology is fully configure and address decoders committed, the guest physical address for the memory device is part of a larger window which is owned by the platform. The creation of these windows is later in this series. The following example will create a 256M device in a 512M window: -object "memory-backend-file,id=cxl-mem1,share,mem-path=cxl-type3,size=512M" -device "cxl-type3,bus=rp0,memdev=cxl-mem1,id=cxl-pmem0" Note: Dropped PCDIMM info interfaces for now. They can be added if appropriate at a later date. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-18-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13hw/cxl/device: Add log commands (8.2.9.4) + CELBen Widawsky1-0/+69
CXL specification provides for the ability to obtain logs from the device. Logs are either spec defined, like the "Command Effects Log" (CEL), or vendor specific. UUIDs are defined for all log types. The CEL is a mechanism to provide information to the host about which commands are supported. It is useful both to determine which spec'd optional commands are supported, as well as provide a list of vendor specified commands that might be used. The CEL is already created as part of mailbox initialization, but here it is now exported to hosts that use these log commands. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-11-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13hw/cxl/device: Timestamp implementation (8.2.9.3)Ben Widawsky1-0/+42
Errata F4 to CXL 2.0 clarified the meaning of the timer as the sum of the value set with the timestamp set command and the number of nano seconds since it was last set. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-10-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1)Ben Widawsky1-1/+26
Using the previously implemented stubbed helpers, it is now possible to easily add the missing, required commands to the implementation. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-9-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-13hw/cxl/device: Implement basic mailbox (8.2.8.4)Ben Widawsky1-0/+164
This is the beginning of implementing mailbox support for CXL 2.0 devices. The implementation recognizes when the doorbell is rung, handles the command/payload, clears the doorbell while returning error codes and data. Generally the mailbox mechanism is designed to permit communication between the host OS and the firmware running on the device. For our purposes, we emulate both the firmware, implemented primarily in cxl-mailbox-utils.c, and the hardware. No commands are implemented yet. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220429144110.25167-7-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.1 at 2025-03-18 13:31:21 +0000