aboutsummaryrefslogtreecommitdiff
path: root/hw/block
AgeCommit message (Collapse)AuthorFilesLines
2020-09-02hw/block/nvme: add check for mdtsKlaus Jensen3-1/+31
Add 'mdts' device parameter to control the Maximum Data Transfer Size of the controller and check that it is respected. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: refactor request bounds checkingKlaus Jensen1-5/+21
Hoist bounds checking into its own function and check for wrap-around. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: verify validity of prp lists in the cmbKlaus Jensen1-1/+13
Before this patch the device already supported PRP lists in the CMB, but it did not check for the validity of it nor announced the support in the Identify Controller data structure LISTS field. If some of the PRPs in a PRP list are in the CMB, then ALL entries must be there. This patch makes sure that requirement is verified as well as properly announcing support for PRP lists in the CMB. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: add request mapping helperKlaus Jensen1-3/+10
Introduce the nvme_map helper to remove some noise in the main nvme_rw function. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: add tracing to nvme_map_prpKlaus Jensen2-0/+3
Add tracing to nvme_map_prp. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
2020-09-02hw/block/nvme: refactor dma read/writeKlaus Jensen1-45/+46
Refactor the nvme_dma_{read,write}_prp functions into a common function taking a DMADirection parameter. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: destroy request iov before reuseKlaus Jensen1-0/+4
Make sure the request iov is destroyed before reuse; fixing a memory leak. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
2020-09-02hw/block/nvme: remove redundant has_sg memberKlaus Jensen2-6/+2
Remove the has_sg member from NvmeRequest since it's redundant. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
2020-09-02hw/block/nvme: replace dma_acct with blk_acct equivalentKlaus Jensen1-1/+4
The QSG isn't always initialized, so accounting could be wrong. Issue a call to blk_acct_start instead with the size taken from the QSG or IOV depending on the kind of I/O. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: add mapping helpersKlaus Jensen2-17/+96
Add nvme_map_addr, nvme_map_addr_cmb and nvme_addr_to_cmb helpers and use them in nvme_map_prp. This fixes a bug where in the case of a CMB transfer, the device would map to the buffer with a wrong length. Fixes: b2b2b67a00574 ("nvme: Add support for Read Data and Write Data in CMBs.") Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com>
2020-09-02hw/block/nvme: memset preallocated requests structuresKlaus Jensen1-1/+1
This is preparatory to subsequent patches that change how QSGs/IOVs are handled. It is important that the qsg and iov members of the NvmeRequest are initially zeroed. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: bump supported version to v1.3Klaus Jensen1-1/+3
Bump the supported NVM Express version to v1.3. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200706061303.246057-19-its@irrelevant.dk>
2020-09-02hw/block/nvme: provide the mandatory subnqn fieldKlaus Jensen1-0/+5
The SUBNQN field is mandatory in NVM Express 1.3. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-18-its@irrelevant.dk>
2020-09-02hw/block/nvme: enforce valid queue creation sequenceKlaus Jensen2-0/+13
Support returning Command Sequence Error if Set Features on Number of Queues is called after queues have been created. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200706061303.246057-17-its@irrelevant.dk>
2020-09-02hw/block/nvme: reject invalid nsid values in active namespace id listKlaus Jensen1-0/+10
Reject the nsid broadcast value (0xffffffff) and 0xfffffffe in the Active Namespace ID list. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-16-its@irrelevant.dk>
2020-09-02hw/block/nvme: support identify namespace descriptor listKlaus Jensen2-0/+42
Since we are not providing the NGUID or EUI64 fields, we must support the Namespace UUID. We do not have any way of storing a persistent unique identifier, so conjure up a UUID that is just the namespace id. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-15-its@irrelevant.dk>
2020-09-02hw/block/nvme: make sure ncqr and nsqr is validKlaus Jensen1-0/+8
0xffff is not an allowed value for NCQR and NSQR in Set Features on Number of Queues. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200706061303.246057-14-its@irrelevant.dk>
2020-09-02hw/block/nvme: support the get/set features select and save fieldsKlaus Jensen2-14/+93
Since the device does not have any persistent state storage, no features are "saveable" and setting the Save (SV) field in any Set Features command will result in a Feature Identifier Not Saveable status code. Similarly, if the Select (SEL) field is set to request saved values, the devices will (as it should) return the default values instead. Since this also introduces "Supported Capabilities", the nsid field is now also checked for validity wrt. the feature being get/set'ed. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-13-its@irrelevant.dk>
2020-09-02hw/block/nvme: add remaining mandatory controller parametersKlaus Jensen2-6/+52
Add support for any remaining mandatory controller operating parameters (features). Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-12-its@irrelevant.dk>
2020-09-02hw/block/nvme: flush write cache when disabledKlaus Jensen1-0/+4
If the write cache is disabled with a Set Features command, flush it if currently enabled. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-11-its@irrelevant.dk>
2020-09-02hw/block/nvme: move NvmeFeatureVal into hw/block/nvme.hKlaus Jensen1-0/+8
The NvmeFeatureVal does not belong with the spec-related data structures in include/block/nvme.h that is shared between the block-level nvme driver and the emulated nvme device. Move it into the nvme device specific header file as it is the only user of the structure. Also, remove the unused members. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-10-its@irrelevant.dk>
2020-09-02hw/block/nvme: add support for the asynchronous event request commandKlaus Jensen3-8/+221
Add support for the Asynchronous Event Request command. Required for compliance with NVMe revision 1.3d. See NVM Express 1.3d, Section 5.2 ("Asynchronous Event Request command"). Mostly imported from Keith's qemu-nvme tree. Modified with a max number of queued events (controllable with the aer_max_queued device parameter). The spec states that the controller *should* retain events, so we do best effort here. Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200706061303.246057-9-its@irrelevant.dk>
2020-09-02hw/block/nvme: add support for the get log page commandKlaus Jensen3-1/+144
Add support for the Get Log Page command and basic implementations of the mandatory Error Information, SMART / Health Information and Firmware Slot Information log pages. In violation of the specification, the SMART / Health Information log page does not persist information over the lifetime of the controller because the device has no place to store such persistent state. Note that the LPA field in the Identify Controller data structure intentionally has bit 0 cleared because there is no namespace specific information in the SMART / Health information log page. Required for compliance with NVMe revision 1.3d. See NVM Express 1.3d, Section 5.14 ("Get Log Page command"). Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-8-its@irrelevant.dk>
2020-09-02hw/block/nvme: mark fw slot 1 as read-onlyKlaus Jensen1-1/+2
Mark firmware slot 1 as read-only and only support that slot. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-7-its@irrelevant.dk>
2020-09-02hw/block/nvme: add temperature threshold featureKlaus Jensen2-0/+49
It might seem weird to implement this feature for an emulated device, but it is mandatory to support and the feature is useful for testing asynchronous event request support, which will be added in a later patch. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200706061303.246057-6-its@irrelevant.dk>
2020-09-02hw/block/nvme: add support for the abort commandKlaus Jensen1-0/+27
Required for compliance with NVMe revision 1.3d. See NVM Express 1.3d, Section 5.1 ("Abort command"). The Abort command is a best effort command; for now, the device always fails to abort the given command. Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200706061303.246057-5-its@irrelevant.dk>
2020-09-02hw/block/nvme: additional tracingKlaus Jensen2-2/+44
Add various additional tracing and streamline nvme_identify_ns and nvme_identify_nslist (they do not need to repeat the command, it is already in the trace name). Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-4-its@irrelevant.dk>
2020-09-02hw/block/nvme: fix missing endian conversionKlaus Jensen1-3/+3
Fix a missing cpu_to conversion by moving conversion to just before returning instead. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-3-its@irrelevant.dk>
2020-09-02hw/block/nvme: bump spec data structures to v1.3Klaus Jensen1-6/+6
Add missing fields in the Identify Controller and Identify Namespace data structures to bring them in line with NVMe v1.3. This also adds data structures and defines for SGL support which requires a couple of trivial changes to the nvme block driver as well. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Fam Zheng <fam@euphon.net> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200706061303.246057-2-its@irrelevant.dk>
2020-09-02hw/block/nvme: Align I/O BAR to 4 KiBPhilippe Mathieu-Daudé1-3/+2
Simplify the NVMe emulated device by aligning the I/O BAR to 4 KiB. Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200630110429.19972-5-philmd@redhat.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2020-09-02hw/block/nvme: Update specification URLPhilippe Mathieu-Daudé1-1/+1
At some point the URL changed, update it to avoid other developers to search for it. Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200630110429.19972-2-philmd@redhat.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2020-09-01hw: Remove superfluous breaksLiao Pingfang1-1/+0
Remove superfluous breaks, as there is a "return" before them. Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1594631126-36631-1-git-send-email-wang.yi59@zte.com.cn> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-28Merge remote-tracking branch ↵Peter Maydell1-5/+5
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine queue + QOM fixes and cleanups Bug fix: * numa: hmat: fix cache size check (Igor Mammedov) QOM fixes and cleanups: * Move QOM macros and typedefs to header files * Use TYPE_* constants on TypeInfo structs * Rename QOM type checking macros for consistency * Rename enum values and typedefs that conflict with QOM type checking amcros * Fix typos on QOM type checking macros * Delete unused QOM type checking macros that use non-existing typedefs * hvf: Add missing include * xen-legacy-backend: Add missing typedef XenLegacyDevice # gpg: Signature made Thu 27 Aug 2020 20:20:05 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: (53 commits) dc390: Use TYPE_DC390_DEVICE constant ppce500: Use TYPE_PPC_E500_PCI_BRIDGE constant tosa: Use TYPE_TOSA_MISC_GPIO constant xlnx-zcu102: Use TYPE_ZCU102_MACHINE constant sclpconsole: Use TYPE_* constants amd_iommu: Use TYPE_AMD_IOMMU_PCI constant nios2_iic: Use TYPE_ALTERA_IIC constant etsec: Use TYPE_ETSEC_COMMON constant migration: Rename class type checking macros swim: Rename struct SWIM to Swim s390-virtio-ccw: Rename S390_MACHINE_CLASS macro nubus: Rename class type checking macros vfio/pci: Move QOM macros to header kvm: Move QOM macros to kvm.h mptsas: Move QOM macros to header pxa2xx: Move QOM macros to header rocker: Move QOM macros to header auxbus: Move QOM macros to header piix: Move QOM macros to header virtio-serial-bus: Move QOM macros to header ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-27swim: Rename struct SWIM to SwimEduardo Habkost1-5/+5
Currently we have a SWIM typedef and a SWIM type checking macro, but OBJECT_DECLARE* would transform the SWIM macro into a function, and the function name would conflict with the SWIM typedef name. Rename the struct and typedef to "Swim". This will make future conversion to OBJECT_DECLARE* easier. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Laurent Vivier <laurent@vivier.eu> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-50-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27vhost-user-blk-pci: default num_queues to -smp NStefan Hajnoczi1-1/+5
Automatically size the number of request virtqueues to match the number of vCPUs. This ensures that completion interrupts are handled on the same vCPU that submitted the request. No IPI is necessary to complete an I/O request and performance is improved. The maximum number of MSI-X vectors and virtqueues limit are respected. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20200818143348.310613-8-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-27virtio-blk-pci: default num_queues to -smp NStefan Hajnoczi1-1/+5
Automatically size the number of virtio-blk-pci request virtqueues to match the number of vCPUs. Other transports continue to default to 1 request virtqueue. A 1:1 virtqueue:vCPU mapping ensures that completion interrupts are handled on the same vCPU that submitted the request. No IPI is necessary to complete an I/O request and performance is improved. The maximum number of MSI-X vectors and virtqueues limit are respected. Performance improves from 78k to 104k IOPS on a 32 vCPU guest with 101 virtio-blk-pci devices (ioengine=libaio, iodepth=1, bs=4k, rw=randread with NVMe storage). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Message-Id: <20200818143348.310613-7-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-21meson: convert hw/blockMarc-André Lureau4-20/+23
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini2-0/+2
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-21qom: Change object_get_canonical_path_component() not to mallocMarkus Armbruster1-3/+2
object_get_canonical_path_component() returns a malloced copy of a property name on success, null on failure. 19 of its 25 callers immediately free the returned copy. Change object_get_canonical_path_component() to return the property name directly. Since modifying the name would be wrong, adjust the return type to const char *. Drop the free from the 19 callers become simpler, add the g_strdup() to the other six. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200714160202.3121879-4-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com>
2020-07-10xen: Use ERRP_GUARD()Vladimir Sementsov-Ogievskiy2-69/+50
If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-10pflash: Use ERRP_GUARD()Vladimir Sementsov-Ogievskiy2-8/+6
If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^Parallel NOR Flash devices$/,/^$/{s/^F: //p}' \ MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-5-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-07-10qapi: Smooth another visitor error checking patternMarkus Armbruster1-4/+2
Convert visit_type_FOO(v, ..., &ptr, &err); ... if (err) { ... } to visit_type_FOO(v, ..., &ptr, errp); ... if (!ptr) { ... } for functions that set @ptr to non-null / null on success / error. Eliminate error_propagate() that are now unnecessary. Delete @err that are now unused. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-40-armbru@redhat.com>
2020-07-10error: Eliminate error_propagate() manuallyMarkus Armbruster1-5/+3
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. The previous two commits did that for sufficiently simple cases with Coccinelle. Do it for several more manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-37-armbru@redhat.com>
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster2-5/+2
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10qom: Use returned bool to check for failure, Coccinelle partMarkus Armbruster1-8/+7
The previous commit enables conversion of foo(..., &err); if (err) { ... } to if (!foo(..., errp)) { ... } for QOM functions that now return true / false on success / error. Coccinelle script: @@ identifier fun = { object_apply_global_props, object_initialize_child_with_props, object_initialize_child_with_propsv, object_property_get, object_property_get_bool, object_property_parse, object_property_set, object_property_set_bool, object_property_set_int, object_property_set_link, object_property_set_qobject, object_property_set_str, object_property_set_uint, object_set_props, object_set_propv, user_creatable_add_dict, user_creatable_complete, user_creatable_del }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-29-armbru@redhat.com>
2020-07-10qom: Put name parameter before value / visitor parameterMarkus Armbruster1-5/+4
The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-10qapi: Use returned bool to check for failure, Coccinelle partMarkus Armbruster1-2/+1
The previous commit enables conversion of visit_foo(..., &err); if (err) { ... } to if (!visit_foo(..., errp)) { ... } for visitor functions that now return true / false on success / error. Coccinelle script: @@ identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*"; expression list args; typedef Error; Error *err; @@ - fun(args, &err); - if (err) + if (!fun(args, &err)) { ... } A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-19-armbru@redhat.com>
2020-07-10qdev: Use returned bool to check for qdev_realize() etc. failureMarkus Armbruster2-4/+2
Convert foo(..., &err); if (err) { ... } to if (!foo(..., &err)) { ... } for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their wrappers isa_realize_and_unref(), pci_realize_and_unref(), sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref(). Coccinelle script: @@ identifier fun = { isa_realize_and_unref, pci_realize_and_unref, qbus_realize, qdev_realize, qdev_realize_and_unref, sysbus_realize, sysbus_realize_and_unref, usb_realize_and_unref }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Nothing to convert there; skipped. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200707160613.848843-5-armbru@redhat.com>
2020-06-25Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-2/+109
virtio,acpi,pci: fixes, cleanups. Fixes, cleanups in ACPI, PCI, virtio. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 25 Jun 2020 07:48:47 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: Rename use_acpi_pci_hotplug to more appropriate use_acpi_hotplug_bridge Stop vhost-user sending uninitialized mmap_offsets docs/specs/tpm: ACPI boot now supported for TPM/ARM arm/acpi: Add the TPM2.0 device under the DSDT acpi: Some build_tpm2() code reshape tests/acpi: update expected data files acpi: q35: drop _SB.PCI0.ISA.LPCD opregion. acpi: drop build_piix4_pm() acpi: drop serial/parallel enable bits from dsdt acpi: simplify build_isa_devices_aml() acpi: factor out fw_cfg_add_acpi_dsdt() acpi: move aml builder code for i8042 (kbd+mouse) device floppy: move cmos_get_fd_drive_type() from pc floppy: make isa_fdc_get_drive_max_chs static acpi: move aml builder code for floppy device acpi: bios-tables-test: show more context on asl diffs qtest: allow DSDT acpi table changes Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-24floppy: move cmos_get_fd_drive_type() from pcGerd Hoffmann1-1/+25
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: John Snow <jsnow@redhat.com> Message-Id: <20200619091905.21676-6-kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.1 at 2024-10-01 19:55:56 +0000