aboutsummaryrefslogtreecommitdiff
path: root/hw/block
AgeCommit message (Collapse)AuthorFilesLines
2021-07-09Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-0/+16
pc,pci,virtio: bugfixes, improvements vhost-user-rng support. Fixes all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 07 Jul 2021 14:29:30 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: MAINTAINERS: Add maintainer for vhost-user RNG implementation docs: add slot when adding new PCIe root port acpi/ged: fix reset cause tests: acpi: pc: update expected DSDT blobs acpi: pc: revert back to v5.2 PCI slot enumeration tests: acpi: prepare for changing DSDT tables migration: failover: reset partially_hotplugged virtio-pci: Changed return values for "notify", "device" and "isr" read. virtio-pci: Added check for virtio device in PCI config cbs. virtio-pci: Added check for virtio device presence in mm callbacks. hw/pci-host/q35: Ignore write of reserved PCIEXBAR LENGTH field virtio: Clarify MR transaction optimization virtio: disable ioeventfd for record/replay Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-07-06block: Add backend_defaults propertyAkihiko Odaki1-4/+38
backend_defaults property allow users to control if default block properties should be decided with backend information. If it is off, any backend information will be discarded, which is suitable if you plan to perform live migration to a different disk backend. If it is on, a block device may utilize backend information more aggressively. By default, it is auto, which uses backend information for block sizes and ignores the others, which is consistent with the older versions. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-id: 20210705130458.97642-2-akihiko.odaki@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-07-02virtio: Clarify MR transaction optimizationGreg Kurz1-0/+16
The device model batching its ioeventfds in a single MR transaction is an optimization. Clarify this in virtio-scsi, virtio-blk and generic virtio code. Also clarify that the transaction must commit before closing ioeventfds so that no one is tempted to merge the loops in the start functions error path and in the stop functions. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <162125799728.1394228.339855768563326832.stgit@bahia.lan> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-06-30vhost-user-blk: Implement reconnection during realizeKevin Wolf1-1/+15
Commit dabefdd6 removed code that was supposed to try reconnecting during .realize(), but actually just crashed and had several design problems. This adds the feature back without the crash in simple cases while also fixing some design problems: Reconnection is now only tried if there was a problem with the connection and not an error related to the content (which would fail again the same way in the next attempt). Reconnection is limited to three attempts (four with the initial attempt) so that we won't end up in an infinite loop if a problem is permanent. If the backend restarts three times in the very short time window of device initialisation, we have bigger problems and erroring out is the right course of action. In the case that a connection error occurs and we reconnect, the error message is printed using error_report_err(), but otherwise ignored. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210609154658.350308-8-kwolf@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-30vhost-user-blk: Factor out vhost_user_blk_realize_connect()Kevin Wolf1-16/+32
This function is the part that we will want to retry if the connection is lost during initialisation, so factor it out to keep the following patch simpler. The error path for vhost_dev_get_config() forgot disconnecting the chardev, add this while touching the code. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210609154658.350308-7-kwolf@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-30vhost: Distinguish errors in vhost_dev_get_config()Kevin Wolf1-4/+5
Instead of just returning 0/-1 and letting the caller make up a meaningless error message, add an Error parameter to allow reporting the real error and switch to 0/-errno so that different kind of errors can be distinguished in the caller. config_len in vhost_user_get_config() is defined by the device, so if it's larger than VHOST_USER_MAX_CONFIG_SIZE, this is a programming error. Turn the corresponding check into an assertion. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210609154658.350308-6-kwolf@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-30vhost-user-blk: Add Error parameter to vhost_user_blk_start()Kevin Wolf1-16/+15
Instead of letting the caller make up a meaningless error message, add an Error parameter to allow reporting the real error. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210609154658.350308-5-kwolf@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-30vhost: Add Error parameter to vhost_dev_init()Kevin Wolf1-2/+2
This allows callers to return better error messages instead of making one up while the real error ends up on stderr. Most callers can immediately make use of this because they already have an Error parameter themselves. The others just keep printing the error with error_report_err(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210609154658.350308-2-kwolf@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-25hw/block/fdc: Add description to floppy controllersPhilippe Mathieu-Daudé2-0/+3
Change the '-device help' output from: Storage devices: name "floppy", bus floppy-bus, desc "virtual floppy drive" name "isa-fdc", bus ISA to: Storage devices: name "floppy", bus floppy-bus, desc "virtual floppy drive" name "isa-fdc", bus ISA, desc "virtual floppy controller" Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210614193220.2007159-7-philmd@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-25hw/block/fdc: Extract SysBus floppy controllers to fdc-sysbus.cPhilippe Mathieu-Daudé5-220/+256
Some machines use floppy controllers via the SysBus interface, and don't need to pull in all the SysBus code. Extract the SysBus specific code to a new unit: fdc-sysbus.c, and add a new Kconfig symbol: "FDC_SYSBUS". Reviewed-by: John Snow <jsnow@redhat.com> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210614193220.2007159-6-philmd@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-25hw/block/fdc: Extract ISA floppy controllers to fdc-isa.cPhilippe Mathieu-Daudé4-268/+325
Some machines use floppy controllers via the SysBus interface, and don't need to pull in all the ISA code. Extract the ISA specific code to a new unit: fdc-isa.c, and add a new Kconfig symbol: "FDC_ISA". This allows us to remove the FIXME from commit dd0ff8191ab ("isa: express SuperIO dependencies with Kconfig"). Reviewed-by: John Snow <jsnow@redhat.com> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210614193220.2007159-5-philmd@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-25hw/block/fdc: Declare shared prototypes in fdc-internal.hPhilippe Mathieu-Daudé2-122/+167
We want to extract ISA/SysBus code from the generic fdc.c file. First, declare the prototypes we will access from the new units into a new local header: "fdc-internal.h". Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210614193220.2007159-4-philmd@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-25hw/block/fdc: Replace disabled fprintf() by trace eventPhilippe Mathieu-Daudé2-6/+2
Reviewed-by: John Snow <jsnow@redhat.com> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210614193220.2007159-3-philmd@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella2-2/+2
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-19Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell1-55/+30
Block layer patches - vhost-user-blk: Fix error handling during initialisation - Add test cases for the vhost-user-blk export - Fix leaked Transaction objects - qcow2: Expose dirty bit in 'qemu-img info' # gpg: Signature made Tue 18 May 2021 11:57:46 BST # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: vhost-user-blk: Check that num-queues is supported by backend virtio: Fail if iommu_platform is requested, but unsupported vhost-user-blk: Get more feature flags from vhost device vhost-user-blk: Improve error reporting in realize vhost-user-blk: Don't reconnect during initialisation vhost-user-blk: Make sure to set Error on realize failure vhost-user-blk-test: test discard/write zeroes invalid inputs tests/qtest: add multi-queue test case to vhost-user-blk-test test: new qTest case to test the vhost-user-blk-server block/export: improve vu_blk_sect_range_ok() block: Fix Transaction leak in bdrv_reopen_multiple() block: Fix Transaction leak in bdrv_root_attach_child() qcow2: set bdi->is_dirty Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-18vhost-user-blk: Check that num-queues is supported by backendKevin Wolf1-0/+1
Creating a device with a number of queues that isn't supported by the backend is pointless, the device won't work properly and the error messages are rather confusing. Just fail to create the device if num-queues is higher than what the backend supports. Since the relationship between num-queues and the number of virtqueues depends on the specific device, this is an additional value that needs to be initialised by the device. For convenience, allow leaving it 0 if the check should be skipped. This makes sense for vhost-user-net where separate vhost devices are used for the queues and custom initialisation code is needed to perform the check. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935031 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20210429171316.162022-7-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-05-18vhost-user-blk: Get more feature flags from vhost deviceKevin Wolf1-0/+2
VIRTIO_F_RING_PACKED and VIRTIO_F_IOMMU_PLATFORM need to be supported by the vhost device, otherwise advertising it to the guest doesn't result in a working configuration. They are currently not supported by the vhost-user-blk export in QEMU. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935020 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20210429171316.162022-5-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-05-18vhost-user-blk: Improve error reporting in realizeKevin Wolf1-12/+11
Now that vhost_user_blk_connect() is not called from an event handler any more, but directly from vhost_user_blk_device_realize(), we can actually make use of Error again instead of calling error_report() in the inner function and setting a more generic and therefore less useful error message in realize() itself. With Error, the callers are responsible for adding context if necessary (such as the "-device" option the error refers to). Additional prefixes are redundant and better omitted. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20210429171316.162022-4-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-05-18vhost-user-blk: Don't reconnect during initialisationKevin Wolf1-42/+17
This is a partial revert of commits 77542d43149 and bc79c87bcde. Usually, an error during initialisation means that the configuration was wrong. Reconnecting won't make the error go away, but just turn the error condition into an endless loop. Avoid this and return errors again. Additionally, calling vhost_user_blk_disconnect() from the chardev event handler could result in use-after-free because none of the initialisation code expects that the device could just go away in the middle. So removing the call fixes crashes in several places. For example, using a num-queues setting that is incompatible with the backend would result in a crash like this (dereferencing dev->opaque, which is already NULL): #0 0x0000555555d0a4bd in vhost_user_read_cb (source=0x5555568f4690, condition=(G_IO_IN | G_IO_HUP), opaque=0x7fffffffcbf0) at ../hw/virtio/vhost-user.c:313 #1 0x0000555555d950d3 in qio_channel_fd_source_dispatch (source=0x555557c3f750, callback=0x555555d0a478 <vhost_user_read_cb>, user_data=0x7fffffffcbf0) at ../io/channel-watch.c:84 #2 0x00007ffff7b32a9f in g_main_context_dispatch () at /lib64/libglib-2.0.so.0 #3 0x00007ffff7b84a98 in g_main_context_iterate.constprop () at /lib64/libglib-2.0.so.0 #4 0x00007ffff7b32163 in g_main_loop_run () at /lib64/libglib-2.0.so.0 #5 0x0000555555d0a724 in vhost_user_read (dev=0x555557bc62f8, msg=0x7fffffffcc50) at ../hw/virtio/vhost-user.c:402 #6 0x0000555555d0ee6b in vhost_user_get_config (dev=0x555557bc62f8, config=0x555557bc62ac "", config_len=60) at ../hw/virtio/vhost-user.c:2133 #7 0x0000555555d56d46 in vhost_dev_get_config (hdev=0x555557bc62f8, config=0x555557bc62ac "", config_len=60) at ../hw/virtio/vhost.c:1566 #8 0x0000555555cdd150 in vhost_user_blk_device_realize (dev=0x555557bc60b0, errp=0x7fffffffcf90) at ../hw/block/vhost-user-blk.c:510 #9 0x0000555555d08f6d in virtio_device_realize (dev=0x555557bc60b0, errp=0x7fffffffcff0) at ../hw/virtio/virtio.c:3660 Note that this removes the ability to reconnect during initialisation (but not during operation) when there is no permanent error, but the backend restarts, as the implementation was buggy. This feature can be added back in a follow-up series after changing error paths to distinguish cases where retrying could help from cases with permanent errors. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210429171316.162022-3-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-05-18vhost-user-blk: Make sure to set Error on realize failureKevin Wolf1-3/+1
We have to set errp before jumping to virtio_err, otherwise the caller (virtio_device_realize()) will take this as success and crash when it later tries to access things that we've already freed in the error path. Fixes: 77542d431491788d1e8e79d93ce10172ef207775 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210429171316.162022-2-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-05-17hw/nvme: move nvme emulation out of hw/blockKlaus Jensen8-8293/+0
With the introduction of the nvme-subsystem device we are really cluttering up the hw/block directory. As suggested by Philippe previously, move the nvme emulation to hw/nvme. Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-05-17hw/block/nvme: move zoned constraints checksKlaus Jensen1-24/+28
Validation of the max_active and max_open zoned parameters are independent of any other state, so move them to the early nvme_ns_check_constraints parameter checks. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-05-17hw/block/nvme: remove irrelevant zone resource checksKlaus Jensen1-13/+0
It is not an error to report more active/open zones supported than the number of zones in the namespace. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-05-17hw/block/nvme: remove num_namespaces memberKlaus Jensen2-16/+15
The NvmeCtrl num_namespaces member is just an indirection for the NVME_MAX_NAMESPACES constant. Remove the indirection. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-05-17hw/block/nvme: streamline namespace array indexingKlaus Jensen2-4/+4
Streamline namespace array indexing such that both the subsystem and controller namespaces arrays are 1-indexed. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-05-17hw/block/nvme: add metadata offset helperKlaus Jensen4-10/+15
Add an nvme_moff() helper. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-05-17hw/block/nvme: cache lba and ms sizesKlaus Jensen4-99/+56
There is no need to look up the lba size and metadata size in the LBA Format structure everytime we want to use it. And we use it a lot. Cache the values in the NvmeNamespace and update them if the namespace is formatted. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-05-17hw/block/nvme: replace nvme_ns_statusKlaus Jensen2-12/+8
The inline nvme_ns_status() helper only has a single call site. Remove it from the header file and inline it for real. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-05-17hw/block/nvme: remove non-shared defines from header fileKlaus Jensen3-2/+2
Remove non-shared defines from the shared header. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-05-17hw/block/nvme: cleanup includesKlaus Jensen4-36/+15
Clean up includes. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-05-17hw/block/nvme: consolidate header filesKlaus Jensen8-391/+348
In preparation for moving the nvme device into its own subtree, merge the header files into one. Also add missing copyright notice and add list of authors with substantial contributions. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-05-17hw/block/nvme: rename __nvme_select_ns_iocsKlaus Jensen1-24/+23
Get rid of the (reserved) double underscore use. Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-05-17hw/block/nvme: rename __nvme_advance_zone_wpKlaus Jensen1-4/+4
Get rid of the (reserved) double underscore use. Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-05-17hw/block/nvme: rename __nvme_zrm_openKlaus Jensen1-6/+10
Get rid of the (reserved) double underscore use. Rename the "generic" zone open function to nvme_zrm_open_flags() and add a generic `int flags` argument instead which allows more flags to be easily added in the future. There is at least one TP under standardization that would add an additional flag. Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org>
2021-05-17hw/block/nvme: align with existing styleGollu Appalanaidu2-30/+39
While QEMU coding style prefers lowercase hexadecimals in constants, the NVMe subsystem uses the format from the NVMe specifications in comments, i.e. 'h' suffix instead of '0x' prefix. Fix this up across the code base. Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com> [k.jensen: updated message; added conversion in a couple of missing comments] Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2021-05-17hw/block/nvme: function formatting fixGollu Appalanaidu1-1/+1
nvme_map_addr_pmr function arguments not aligned, fix that. Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2021-05-17hw/block/nvme: fix io-command set profile featureGollu Appalanaidu1-3/+2
Currently IO Command Set Profile feature is supported, but the feature support flag not set. Further, this feature is changable. Fix that. Additionally, remove filling default value of the CQE result with zero, since it will fall back to the default case anyway. Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com> [k.jensen: fix up commit message] Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2021-05-17hw/block/nvme: consider metadata read aio return value in compareGollu Appalanaidu1-0/+11
Currently in compare command metadata aio read blk_aio_preadv return value ignored. Consider it and complete the block accounting. Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com> Fixes: 0a384f923f51 ("hw/block/nvme: add compare command") Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2021-05-17hw/block/nvme: remove redundant invalid_lba_range traceGollu Appalanaidu1-8/+1
Currently pci_nvme_err_invalid_lba_range trace is called individually at each nvme_check_bounds() call site. Move the trace event to nvme_check_bounds() and remove the redundant events. Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [k.jensen: commit message fixup] Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2021-05-16Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell2-3/+35
pc,pci,virtio: bugfixes, improvements Fixes all over the place. Faster boot for virtio. ioeventfd support for mmio. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 14 May 2021 15:27:13 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: Fix build with 64 bits time_t vhost-vdpa: Make vhost_vdpa_get_device_id() static hw/virtio: enable ioeventfd configuring for mmio hw/smbios: support for type 41 (onboard devices extended information) checkpatch: Fix use of uninitialized value virtio-scsi: Configure all host notifiers in a single MR transaction virtio-scsi: Set host notifiers and callbacks separately virtio-blk: Configure all host notifiers in a single MR transaction virtio-blk: Fix rollback path in virtio_blk_data_plane_start() pc-dimm: remove unnecessary get_vmstate_memory_region() method amd_iommu: fix wrong MMIO operations virtio-net: Constify VirtIOFeature feature_sizes[] virtio-blk: Constify VirtIOFeature feature_sizes[] hw/virtio: Pass virtio_feature_get_config_size() a const argument x86: acpi: use offset instead of pointer when using build_header() amd_iommu: Fix pte_override_page_mask() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/arm/virt.c
2021-05-14virtio-blk: Configure all host notifiers in a single MR transactionGreg Kurz1-0/+25
This allows the virtio-blk-pci device to batch the setup of all its host notifiers. This significantly improves boot time of VMs with a high number of vCPUs, e.g. from 3m26.186s down to 0m58.023s for a pseries machine with 384 vCPUs. Note that memory_region_transaction_commit() must be called before virtio_bus_cleanup_host_notifier() because the latter might close ioeventfds that the transaction still assumes to be around when it commits. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20210407143501.244343-3-groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-05-14virtio-blk: Fix rollback path in virtio_blk_data_plane_start()Greg Kurz1-2/+9
When dataplane multiqueue support was added in QEMU 2.7, the path that would rollback guest notifiers assignment in case of error simply got dropped. Later on, when Error was added to blk_set_aio_context() in QEMU 4.1, another error path was introduced, but it ommits to rollback both host and guest notifiers. It seems cleaner to fix the rollback path in one go. The patch is simple enough that it can be adjusted if backported to a pre-4.1 QEMU. Fixes: 51b04ac5c6a6 ("virtio-blk: dataplane multiqueue support") Cc: stefanha@redhat.com Fixes: 97896a4887a0 ("block: Add Error to blk_set_aio_context()") Cc: kwolf@redhat.com Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20210407143501.244343-2-groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-05-14virtio-blk: Constify VirtIOFeature feature_sizes[]Philippe Mathieu-Daudé1-1/+1
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210511104157.2880306-3-philmd@redhat.com>
2021-05-13Merge remote-tracking branch 'remotes/philmd/tags/pflash-20210511' into stagingPeter Maydell1-3/+7
Parallel NOR Flash patches queue - Simplify memory layout when no pflash_cfi02 mapping requested # gpg: Signature made Tue 11 May 2021 17:12:58 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd/tags/pflash-20210511: hw/block/pflash_cfi02: Do not create aliases when not necessary hw/block/pflash_cfi02: Set romd mode in pflash_cfi02_realize() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-11hw/block/pflash_cfi02: Do not create aliases when not necessaryPhilippe Mathieu-Daudé1-2/+6
When no mapping is requested, it is pointless to create alias regions. Only create them when multiple mappings are requested to simplify the memory layout. The flatview is not changed. For example using 'qemu-system-sh4 -M r2d -S -monitor stdio', * before: (qemu) info mtree address-space: memory 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-0000000000ffffff (prio 0, i/o): pflash 0000000000000000-0000000000ffffff (prio 0, romd): alias pflash-alias @r2d.flash 0000000000000000-0000000000ffffff 0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga 000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram (qemu) info mtree -f FlatView #0 AS "memory", root: system AS "cpu-memory-0", root: system Root memory region: system 0000000000000000-0000000000ffffff (prio 0, romd): r2d.flash 0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga 000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram * after: (qemu) info mtree address-space: memory 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-0000000000ffffff (prio 0, romd): r2d.flash 0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga 000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram (qemu) info mtree -f FlatView #0 AS "memory", root: system AS "cpu-memory-0", root: system Root memory region: system 0000000000000000-0000000000ffffff (prio 0, romd): r2d.flash 0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga 000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210325120921.858993-3-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-05-11hw/block/pflash_cfi02: Set romd mode in pflash_cfi02_realize()Philippe Mathieu-Daudé1-1/+1
The ROMD mode isn't related to mapping setup. Ideally we'd set this mode when the state machine resets, but for now simply move it to pflash_cfi02_realize() to not introduce logical change. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210325120921.858993-2-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-05-10xen-block: Use specific blockdev driverAnthony PERARD1-1/+13
... when a xen-block backend instance is created via xenstore. Following 8d17adf34f50 ("block: remove support for using "file" driver with block/char devices"), using the "file" blockdev driver for everything doesn't work anymore, we need to use the "host_device" driver when the disk image is a block device and "file" driver when it is a regular file. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20210430163432.468894-1-anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2021-05-05Merge remote-tracking branch ↵Peter Maydell2-2/+1
'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging Trivial patches pull request 20210503 # gpg: Signature made Mon 03 May 2021 09:34:56 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: (23 commits) hw/rx/rx-gdbsim: Do not accept invalid memory size docs: More precisely describe memory-backend-*::id's user scripts: fix generation update-binfmts templates docs/system: Document the removal of "compat" property for POWER CPUs mc146818rtc: put it into the 'misc' category Do not include exec/address-spaces.h if it's not really necessary Do not include cpu.h if it's not really necessary Do not include hw/boards.h if it's not really necessary Do not include sysemu/sysemu.h if it's not really necessary hw: Do not include qemu/log.h if it is not necessary hw: Do not include hw/irq.h if it is not necessary hw: Do not include hw/sysbus.h if it is not necessary hw: Remove superfluous includes of hw/hw.h ui: Fix memory leak in qemu_xkeymap_mapping_table() hw/usb: Constify VMStateDescription hw/display/qxl: Constify VMStateDescription hw/arm: Constify VMStateDescription vmstate: Constify some VMStateDescriptions Fix typo in CFI build documentation hw/pcmcia: Do not register PCMCIA type if not required ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-04Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20210503' ↵Peter Maydell1-0/+2
into staging Aspeed patches : * Fixes for the DMA space * New model for ASPEED's Hash and Crypto Engine (Joel and Klaus) * Acceptance tests (Joel) * A fix for the XDMA model * Some extra features for the SMC controller. * Two new boards : rainier-bmc and quanta-q7l1-bmc (Patrick) # gpg: Signature made Mon 03 May 2021 06:23:36 BST # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20210503: aspeed: Add support for the quanta-q7l1-bmc board hw/block: m25p80: Add support for mt25ql02g and mt25qu02g aspeed: Add support for the rainier-bmc board aspeed: Deprecate the swift-bmc machine tests/qtest: Rename m25p80 test in aspeed_smc test aspeed/smc: Add extra controls to request DMA aspeed/smc: Add a 'features' attribute to the object class hw/misc/aspeed_xdma: Add AST2600 support tests/acceptance: Test ast2600 machine tests/acceptance: Test ast2400 and ast2500 machines tests/qtest: Add test for Aspeed HACE aspeed: Integrate HACE hw: Model ASPEED's Hash and Crypto Engine hw/arm/aspeed: Do not sysbus-map mmio flash region directly, use alias aspeed/i2c: Rename DMA address space aspeed/i2c: Fix DMA address mask aspeed/smc: Remove unused "sdram-base" property aspeed/smc: Use the RAM memory region for DMAs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-02Do not include sysemu/sysemu.h if it's not really necessaryThomas Huth1-1/+0
Stop including sysemu/sysemu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-2-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
generated by cgit v1.1 at 2024-12-27 08:41:19 +0000