aboutsummaryrefslogtreecommitdiff
path: root/hw/block/nvme.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-02hw/block/nvme: remove explicit qsg/iov parametersKlaus Jensen1-4/+7
Since nvme_map_prp always operate on the request-scoped qsg/iovs, just pass a single pointer to the NvmeRequest instead of two for each of the qsg and iov. Suggested-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
2020-09-02hw/block/nvme: use preallocated qsg/iov in nvme_dma_prpKlaus Jensen1-23/+18
Since clean up of the request qsg/iov is now always done post-use, there is no need to use a stack-allocated qsg/iov in nvme_dma_prp. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: consolidate qsg/iov clearingKlaus Jensen1-31/+21
Always destroy the request qsg/iov at the end of request use. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: add ns/cmd references in NvmeRequestKlaus Jensen1-85/+102
Instead of passing around the NvmeNamespace and the NvmeCmd, add them as members in the NvmeRequest structure. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
2020-09-02hw/block/nvme: be consistent about zeros vs zeroesKlaus Jensen1-4/+4
The NVM Express specification generally uses 'zeroes' and not 'zeros', so let us align with it. Cc: Fam Zheng <fam@euphon.net> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
2020-09-02hw/block/nvme: add check for mdtsKlaus Jensen1-1/+29
Add 'mdts' device parameter to control the Maximum Data Transfer Size of the controller and check that it is respected. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: refactor request bounds checkingKlaus Jensen1-5/+21
Hoist bounds checking into its own function and check for wrap-around. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: verify validity of prp lists in the cmbKlaus Jensen1-1/+13
Before this patch the device already supported PRP lists in the CMB, but it did not check for the validity of it nor announced the support in the Identify Controller data structure LISTS field. If some of the PRPs in a PRP list are in the CMB, then ALL entries must be there. This patch makes sure that requirement is verified as well as properly announcing support for PRP lists in the CMB. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: add request mapping helperKlaus Jensen1-3/+10
Introduce the nvme_map helper to remove some noise in the main nvme_rw function. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: add tracing to nvme_map_prpKlaus Jensen1-0/+2
Add tracing to nvme_map_prp. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
2020-09-02hw/block/nvme: refactor dma read/writeKlaus Jensen1-45/+46
Refactor the nvme_dma_{read,write}_prp functions into a common function taking a DMADirection parameter. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: destroy request iov before reuseKlaus Jensen1-0/+4
Make sure the request iov is destroyed before reuse; fixing a memory leak. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
2020-09-02hw/block/nvme: remove redundant has_sg memberKlaus Jensen1-5/+2
Remove the has_sg member from NvmeRequest since it's redundant. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
2020-09-02hw/block/nvme: replace dma_acct with blk_acct equivalentKlaus Jensen1-1/+4
The QSG isn't always initialized, so accounting could be wrong. Issue a call to blk_acct_start instead with the size taken from the QSG or IOV depending on the kind of I/O. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: add mapping helpersKlaus Jensen1-17/+94
Add nvme_map_addr, nvme_map_addr_cmb and nvme_addr_to_cmb helpers and use them in nvme_map_prp. This fixes a bug where in the case of a CMB transfer, the device would map to the buffer with a wrong length. Fixes: b2b2b67a00574 ("nvme: Add support for Read Data and Write Data in CMBs.") Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com>
2020-09-02hw/block/nvme: memset preallocated requests structuresKlaus Jensen1-1/+1
This is preparatory to subsequent patches that change how QSGs/IOVs are handled. It is important that the qsg and iov members of the NvmeRequest are initially zeroed. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
2020-09-02hw/block/nvme: bump supported version to v1.3Klaus Jensen1-1/+3
Bump the supported NVM Express version to v1.3. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200706061303.246057-19-its@irrelevant.dk>
2020-09-02hw/block/nvme: provide the mandatory subnqn fieldKlaus Jensen1-0/+5
The SUBNQN field is mandatory in NVM Express 1.3. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-18-its@irrelevant.dk>
2020-09-02hw/block/nvme: enforce valid queue creation sequenceKlaus Jensen1-0/+12
Support returning Command Sequence Error if Set Features on Number of Queues is called after queues have been created. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200706061303.246057-17-its@irrelevant.dk>
2020-09-02hw/block/nvme: reject invalid nsid values in active namespace id listKlaus Jensen1-0/+10
Reject the nsid broadcast value (0xffffffff) and 0xfffffffe in the Active Namespace ID list. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-16-its@irrelevant.dk>
2020-09-02hw/block/nvme: support identify namespace descriptor listKlaus Jensen1-0/+41
Since we are not providing the NGUID or EUI64 fields, we must support the Namespace UUID. We do not have any way of storing a persistent unique identifier, so conjure up a UUID that is just the namespace id. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-15-its@irrelevant.dk>
2020-09-02hw/block/nvme: make sure ncqr and nsqr is validKlaus Jensen1-0/+8
0xffff is not an allowed value for NCQR and NSQR in Set Features on Number of Queues. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200706061303.246057-14-its@irrelevant.dk>
2020-09-02hw/block/nvme: support the get/set features select and save fieldsKlaus Jensen1-12/+91
Since the device does not have any persistent state storage, no features are "saveable" and setting the Save (SV) field in any Set Features command will result in a Feature Identifier Not Saveable status code. Similarly, if the Select (SEL) field is set to request saved values, the devices will (as it should) return the default values instead. Since this also introduces "Supported Capabilities", the nsid field is now also checked for validity wrt. the feature being get/set'ed. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-13-its@irrelevant.dk>
2020-09-02hw/block/nvme: add remaining mandatory controller parametersKlaus Jensen1-6/+50
Add support for any remaining mandatory controller operating parameters (features). Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-12-its@irrelevant.dk>
2020-09-02hw/block/nvme: flush write cache when disabledKlaus Jensen1-0/+4
If the write cache is disabled with a Set Features command, flush it if currently enabled. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-11-its@irrelevant.dk>
2020-09-02hw/block/nvme: add support for the asynchronous event request commandKlaus Jensen1-7/+203
Add support for the Asynchronous Event Request command. Required for compliance with NVMe revision 1.3d. See NVM Express 1.3d, Section 5.2 ("Asynchronous Event Request command"). Mostly imported from Keith's qemu-nvme tree. Modified with a max number of queued events (controllable with the aer_max_queued device parameter). The spec states that the controller *should* retain events, so we do best effort here. Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200706061303.246057-9-its@irrelevant.dk>
2020-09-02hw/block/nvme: add support for the get log page commandKlaus Jensen1-1/+140
Add support for the Get Log Page command and basic implementations of the mandatory Error Information, SMART / Health Information and Firmware Slot Information log pages. In violation of the specification, the SMART / Health Information log page does not persist information over the lifetime of the controller because the device has no place to store such persistent state. Note that the LPA field in the Identify Controller data structure intentionally has bit 0 cleared because there is no namespace specific information in the SMART / Health information log page. Required for compliance with NVMe revision 1.3d. See NVM Express 1.3d, Section 5.14 ("Get Log Page command"). Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-8-its@irrelevant.dk>
2020-09-02hw/block/nvme: mark fw slot 1 as read-onlyKlaus Jensen1-1/+2
Mark firmware slot 1 as read-only and only support that slot. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-7-its@irrelevant.dk>
2020-09-02hw/block/nvme: add temperature threshold featureKlaus Jensen1-0/+48
It might seem weird to implement this feature for an emulated device, but it is mandatory to support and the feature is useful for testing asynchronous event request support, which will be added in a later patch. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200706061303.246057-6-its@irrelevant.dk>
2020-09-02hw/block/nvme: add support for the abort commandKlaus Jensen1-0/+27
Required for compliance with NVMe revision 1.3d. See NVM Express 1.3d, Section 5.1 ("Abort command"). The Abort command is a best effort command; for now, the device always fails to abort the given command. Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200706061303.246057-5-its@irrelevant.dk>
2020-09-02hw/block/nvme: additional tracingKlaus Jensen1-0/+33
Add various additional tracing and streamline nvme_identify_ns and nvme_identify_nslist (they do not need to repeat the command, it is already in the trace name). Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-4-its@irrelevant.dk>
2020-09-02hw/block/nvme: fix missing endian conversionKlaus Jensen1-3/+3
Fix a missing cpu_to conversion by moving conversion to just before returning instead. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20200706061303.246057-3-its@irrelevant.dk>
2020-09-02hw/block/nvme: bump spec data structures to v1.3Klaus Jensen1-6/+6
Add missing fields in the Identify Controller and Identify Namespace data structures to bring them in line with NVMe v1.3. This also adds data structures and defines for SGL support which requires a couple of trivial changes to the nvme block driver as well. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Fam Zheng <fam@euphon.net> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20200706061303.246057-2-its@irrelevant.dk>
2020-09-02hw/block/nvme: Align I/O BAR to 4 KiBPhilippe Mathieu-Daudé1-3/+2
Simplify the NVMe emulated device by aligning the I/O BAR to 4 KiB. Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200630110429.19972-5-philmd@redhat.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2020-09-02hw/block/nvme: Update specification URLPhilippe Mathieu-Daudé1-1/+1
At some point the URL changed, update it to avoid other developers to search for it. Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200630110429.19972-2-philmd@redhat.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
2020-07-21qom: Change object_get_canonical_path_component() not to mallocMarkus Armbruster1-3/+2
object_get_canonical_path_component() returns a malloced copy of a property name on success, null on failure. 19 of its 25 callers immediately free the returned copy. Change object_get_canonical_path_component() to return the property name directly. Since modifying the name would be wrong, adjust the return type to const char *. Drop the free from the 19 callers become simpler, add the g_strdup() to the other six. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200714160202.3121879-4-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com>
2020-06-17block: consolidate blocksize properties consistency checksRoman Kagan1-1/+3
Several block device properties related to blocksize configuration must be in certain relationship WRT each other: physical block must be no smaller than logical block; min_io_size, opt_io_size, and discard_granularity must be a multiple of a logical block. To ensure these requirements are met, add corresponding consistency checks to blkconf_blocksizes, adjusting its signature to communicate possible error to the caller. Also remove the now redundant consistency checks from the specific devices. Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Message-Id: <20200528225516.1676602-3-rvkagan@yandex-team.ru> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: verify msix_init_exclusive_bar() return valueKlaus Jensen1-3/+10
Pass an Error to msix_init_exclusive_bar() and check it. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Message-Id: <20200609190333.59390-23-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: add msix_qsize parameterKlaus Jensen1-4/+13
Decouple the requested maximum number of ioqpairs (param max_ioqpairs) from the number of MSI-X interrupt vectors by introducing a new msix_qsize parameter and initialize MSI-X with that. This allows emulating a device that has fewer vectors than I/O queue pairs and also allows more than 2048 queue pairs. To keep the device behaving as previously, use a msix_qsize default of 65 (default max_ioqpairs + 1). This decoupling was actually suggested by Maxim some time ago in a slightly different context, so adding a Suggested-by. Suggested-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Message-Id: <20200609190333.59390-22-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: Verify msix_vector_use() returned valuePhilippe Mathieu-Daudé1-1/+4
msix_vector_use() returns -EINVAL on error. Assert it won't. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200609190333.59390-21-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: factor out controller identify setupKlaus Jensen1-23/+26
Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Message-Id: <20200609190333.59390-20-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: do cmb/pmr init as part of pci initKlaus Jensen1-6/+6
Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200609190333.59390-19-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: factor out pmr setupKlaus Jensen1-44/+51
Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200609190333.59390-18-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: factor out cmb setupKlaus Jensen1-19/+24
Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Message-Id: <20200609190333.59390-17-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: factor out pci setupKlaus Jensen1-12/+18
Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Message-Id: <20200609190333.59390-16-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: factor out namespace setupKlaus Jensen1-20/+26
Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Message-Id: <20200609190333.59390-15-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: add namespace helpersKlaus Jensen1-2/+1
Introduce some small helpers to make the next patches easier on the eye. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Message-Id: <20200609190333.59390-14-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: factor out block backend setupKlaus Jensen1-3/+10
Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Message-Id: <20200609190333.59390-13-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: factor out device state setupKlaus Jensen1-9/+13
Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Message-Id: <20200609190333.59390-12-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-06-17hw/block/nvme: factor out property/constraint checksKlaus Jensen1-18/+30
Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Message-Id: <20200609190333.59390-11-its@irrelevant.dk> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.1 at 2024-11-18 21:19:28 +0000