aboutsummaryrefslogtreecommitdiff
path: root/hw/arm
AgeCommit message (Collapse)AuthorFilesLines
2020-01-30target/arm/cpu: Add the kvm-no-adjvtime CPU propertyAndrew Jones1-0/+8
kvm-no-adjvtime is a KVM specific CPU property and a first of its kind. To accommodate it we also add kvm_arm_add_vcpu_properties() and a KVM specific CPU properties description to the CPU features document. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-7-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30hw/arm/virt: Add missing 5.0 options call to 4.2 optionsAndrew Jones1-0/+1
Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-3-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30hw/arm/raspi: Remove obsolete use of -smp to set the soc 'enabled-cpus'Philippe Mathieu-Daudé1-2/+0
Since we enabled parallel TCG code generation for softmmu (see commit 3468b59 "tcg: enable multiple TCG contexts in softmmu") and its subsequent fix (commit 72649619 "add .min_cpus and .default_cpus fields to machine_class"), the raspi machines are restricted to always use their 4 cores: See in hw/arm/raspi2 (with BCM283X_NCPUS set to 4): 222 static void raspi2_machine_init(MachineClass *mc) 223 { 224 mc->desc = "Raspberry Pi 2"; 230 mc->max_cpus = BCM283X_NCPUS; 231 mc->min_cpus = BCM283X_NCPUS; 232 mc->default_cpus = BCM283X_NCPUS; 235 }; 236 DEFINE_MACHINE("raspi2", raspi2_machine_init) We can no longer use the -smp option, as we get: $ qemu-system-arm -M raspi2 -smp 1 qemu-system-arm: Invalid SMP CPUs 1. The min CPUs supported by machine 'raspi2' is 4 Since we can not set the TYPE_BCM283x SOC "enabled-cpus" with -smp, remove the unuseful code. We can achieve the same by using the '-global bcm2836.enabled-cpus=1' option. Reported-by: Laurent Bonnans <laurent.bonnans@here.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200120235159.18510-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30hw/arm/aspeed: add a 'execute-in-place' property to boot directly from CE0Cédric Le Goater1-5/+39
The overhead for the OpenBMC firmware images using the a custom U-Boot is around 2 seconds, which is fine, but with a U-Boot from mainline, it takes an extra 50 seconds or so to reach Linux. A quick survey on the number of reads performed on the flash memory region gives the following figures : OpenBMC U-Boot 922478 (~ 3.5 MBytes) Mainline U-Boot 20569977 (~ 80 MBytes) QEMU must be trashing the TCG TBs and reloading text very often. Some addresses are read more than 250.000 times. Until we find a solution to improve boot time, execution from MMIO is not activated by default. Setting this option also breaks migration compatibility. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200114103433.30534-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30hw/arm: ast2600: Wire up the eMMC controllerAndrew Jeffery2-12/+43
Initialise another SDHCI model instance for the AST2600's eMMC controller and use the SDHCI's num_slots value introduced previously to determine whether we should create an SD card instance for the new slot. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-3-clg@kaod.org [ clg : - removed ternary operator from sdhci_attach_drive() - renamed SDHCI objects with a '-controller' prefix ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30hw/sd: Configure number of slots exposed by the ASPEED SDHCI modelAndrew Jeffery3-1/+5
The AST2600 includes a second cut-down version of the SD/MMC controller found in the AST2500, named the eMMC controller. It's cut down in the sense that it only supports one slot rather than two, but it brings the total number of slots supported by the AST2600 to three. The existing code assumed that the SD controller always provided two slots. Rework the SDHCI object to expose the number of slots as a property to be set by the SoC configuration. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-2-clg@kaod.org [PMM: fixed up to use device_class_set_props()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-29hw/core/loader: Let load_elf() populate a field with CPU-specific flagsAleksandar Markovic2-2/+2
While loading the executable, some platforms (like AVR) need to detect CPU type that executable is built for - and, with this patch, this is enabled by reading the field 'e_flags' of the ELF header of the executable in question. The change expands functionality of the following functions: - load_elf() - load_elf_as() - load_elf_ram() - load_elf_ram_sym() The argument added to these functions is called 'pflags' and is of type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word' being the type of the field 'e_flags', in both 32-bit and 64-bit variants of ELF header). Callers are allowed to pass NULL as that argument, and in such case no lookup to the field 'e_flags' will happen, and no information will be returned, of course. CC: Richard Henderson <rth@twiddle.net> CC: Peter Maydell <peter.maydell@linaro.org> CC: Edgar E. Iglesias <edgar.iglesias@gmail.com> CC: Michael Walle <michael@walle.cc> CC: Thomas Huth <huth@tuxfamily.org> CC: Laurent Vivier <laurent@vivier.eu> CC: Philippe Mathieu-Daudé <f4bug@amsat.org> CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> CC: Aurelien Jarno <aurelien@aurel32.net> CC: Jia Liu <proljc@gmail.com> CC: David Gibson <david@gibson.dropbear.id.au> CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: BALATON Zoltan <balaton@eik.bme.hu> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: Thomas Huth <thuth@redhat.com> CC: Artyom Tarasenko <atar4qemu@gmail.com> CC: Fabien Chouteau <chouteau@adacore.com> CC: KONRAD Frederic <frederic.konrad@adacore.com> CC: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
2020-01-27Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell17-19/+19
* Register qdev properties as class properties (Marc-André) * Cleanups (Philippe) * virtio-scsi fix (Pan Nengyuan) * Tweak Skylake-v3 model id (Kashyap) * x86 UCODE_REV support and nested live migration fix (myself) * Advisory mode for pvpanic (Zhenwei) # gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (58 commits) build-sys: clean up flags included in the linker command line target/i386: Add the 'model-id' for Skylake -v3 CPU models qdev: use object_property_help() qapi/qmp: add ObjectPropertyInfo.default-value qom: introduce object_property_help() qom: simplify qmp_device_list_properties() vl: print default value in object help qdev: register properties as class properties qdev: move instance properties to class properties qdev: rename DeviceClass.props qdev: set properties with device_class_set_props() object: return self in object_ref() object: release all props object: add object_class_property_add_link() object: express const link with link property object: add direct link flag object: rename link "child" to "target" object: check strong flag with & object: do not free class properties object: add object_property_set_default ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau17-19/+19
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-23hw/arm/exynos4210: Connect serial port DMA busy signals with pl330Guenter Roeck1-13/+29
The Exynos4210 serial driver uses an interrupt line to signal if receive data is available. Connect that interrupt with the DMA controller's 'peripheral busy' gpio pin to stop the DMA if there is no more receive data available. Without this patch, receive DMA runs wild and fills the entire receive DMA buffer with invalid data. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200123052540.6132-9-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-23hw/arm/exynos4210: Fix DMA initializationGuenter Roeck1-8/+43
First parameter to exynos4210_get_irq() is not the SPI port number, but the interrupt group number. Interrupt groups are 20 for mdma and 21 for pdma. Interrupts are not inverted. Controllers support 32 events (pdma) or 31 events (mdma). Events must all be routed to a single interrupt line. Set other parameters as documented in Exynos4210 datasheet, section 8 (DMA controller). Fixes: 59520dc65e ("hw/arm/exynos4210: Add DMA support for the Exynos4210") Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200123052540.6132-4-linux@roeck-us.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-23hw/arm: Use helper function to trigger hotplug handler plugKeqian Zhu1-3/+3
We can use existing helper function to trigger hotplug handler plug, which makes code clearer. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-id: 20200120012755.44581-3-zhukeqian1@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-20migration: Define VMSTATE_INSTANCE_ID_ANYPeter Xu1-1/+1
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to auto-generate the vmstate instance ID. Previously it was hard coded as -1 instead of this macro. It helps to change this default value in the follow up patches. No functional change. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2020-01-17i.MX: add an emulation for RNGCMartin Kaiser1-0/+11
Add an emulation for the RNGC random number generator and the compatible RNGB variant. These peripherals are included (at least) in imx25 and imx35 chipsets. The emulation supports the initial self test, reseeding the prng and reading random numbers. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-17hw/arm/allwinner-a10: Remove local qemu_irq variablesPhilippe Mathieu-Daudé1-5/+4
We won't reuse the CPU IRQ/FIQ variables. Simplify by calling qdev_get_gpio_in() in place. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20191230110953.25496-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-17hw/arm/allwinner-a10: Simplify by passing IRQs with qdev_pass_gpios()Philippe Mathieu-Daudé1-13/+11
By calling qdev_pass_gpios() we don't need to hold a copy of the IRQs from the INTC into the SoC state. Instead of filling an array of qemu_irq and passing it around, we can now directly call qdev_get_gpio_in() on the SoC. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20191230110953.25496-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-17hw/arm/allwinner-a10: Move SoC definitions out of headerPhilippe Mathieu-Daudé1-0/+6
These definitions are specific to the A10 SoC and don't need to be exported to the different Allwinner peripherals. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20191230110953.25496-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-17hw/arm: Add the Netduino Plus 2Alistair Francis2-0/+53
Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: dad8d8d47f7625913e35e27a1c00f603a6b08f9a.1576658572.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-17hw/arm: Add the STM32F4xx SoCAlistair Francis2-0/+303
Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1d145c4c13e5fa140caf131232a6f524c88fcd72.1576658572.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-17hw/misc: Add the STM32F4xx EXTI deviceAlistair Francis1-0/+1
Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: ef941d59fd8658589d34ed432e1d6dfdcf7fb1d0.1576658572.git.alistair@alistair23.me Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-17hw/misc: Add the STM32F4xx Sysconfig deviceAlistair Francis1-0/+9
Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 49b01423a09cef2ca832ff73a84a996568f1a8fc.1576658572.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-10Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell2-2/+2
* Compat machines fix (Denis) * Command line parsing fixes (Michal, Peter, Xiaoyao) * Cooperlake CPU model fixes (Xiaoyao) * i386 gdb fix (mkdolata) * IOEventHandler cleanup (Philippe) * icount fix (Pavel) * RR support for random number sources (Pavel) * Kconfig fixes (Philippe) # gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (38 commits) chardev: Use QEMUChrEvent enum in IOEventHandler typedef chardev: use QEMUChrEvent instead of int chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler hw/ipmi: Remove unnecessary declarations target/i386: Add missed features to Cooperlake CPU model target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub hw/rtc/mc146818: Add missing dependency on ISA Bus hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-08chardev: Use QEMUChrEvent enum in IOEventHandler typedefPhilippe Mathieu-Daudé2-2/+2
The Chardev events are listed in the QEMUChrEvent enum. By using the enum in the IOEventHandler typedef we: - make the IOEventHandler type more explicit (this handler process out-of-band information, while the IOReadHandler is in-band), - help static code analyzers. This patch was produced with the following spatch script: @match@ expression backend, opaque, context, set_open; identifier fd_can_read, fd_read, fd_event, be_change; @@ qemu_chr_fe_set_handlers(backend, fd_can_read, fd_read, fd_event, be_change, opaque, context, set_open); @depends on match@ identifier opaque, event; identifier match.fd_event; @@ static -void fd_event(void *opaque, int event) +void fd_event(void *opaque, QEMUChrEvent event) { ... } Then the typedef was modified manually in include/chardev/char-fe.h. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20191218172009.8868-15-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-07omap-gpio: remove PROP_PTRMarc-André Lureau2-7/+8
Since clocks are not QOM objects, replace PROP_PTR of clocks with setters methods. Move/adapt the existing TODO comment about a clock framework. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-01-07omap-i2c: remove PROP_PTRMarc-André Lureau2-5/+5
Since clocks are not QOM objects, replace PROP_PTR of clocks with setters methods. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-01-07omap-intc: remove PROP_PTRMarc-André Lureau2-4/+4
Since clocks are not QOM objects, replace PROP_PTR of clocks with setters methods. (in theory there should probably be different methods for omap1 & omap2 intc, but this is left as a future improvement) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-01-06Merge remote-tracking branch ↵Peter Maydell1-1/+0
'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging x86 and machine queue, 2019-12-20 Bug fix: * Resolve CPU models to v1 by default (Eduardo Habkost) Cleanup: * Remove incorrect numa_mem_supported checks (Igor Mammedov) # gpg: Signature made Fri 20 Dec 2019 19:19:02 GMT # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/x86-and-machine-pull-request: numa: properly check if numa is supported numa: remove not needed check i386: Resolve CPU models to v1 by default Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Report F_STE_FETCH fault address in correct word positionSimon Veith1-1/+1
The smmuv3_record_event() function that generates the F_STE_FETCH error uses the EVT_SET_ADDR macro to record the fetch address, placing it in 32-bit words 4 and 5. The correct position for this address is in words 6 and 7, per the SMMUv3 Architecture Specification. Update the function to use the EVT_SET_ADDR2 macro instead, which is the macro intended for writing to these words. ref. ARM IHI 0070C, section 7.3.4. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-7-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Use correct bit positions in EVT_SET_ADDR2 macroSimon Veith1-2/+2
The bit offsets in the EVT_SET_ADDR2 macro do not match those specified in the ARM SMMUv3 Architecture Specification. In all events that use this macro, e.g. F_WALK_EABT, the faulting fetch address or IPA actually occupies the 32-bit words 6 and 7 in the event record contiguously, with the upper and lower unused bits clear due to alignment or maximum supported address bits. How many bits are clear depends on the individual event type. Update the macro to write to the correct words in the event record so that guest drivers can obtain accurate address information on events. ref. ARM IHI 0070C, sections 7.3.12 through 7.3.16. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-6-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Align stream table base address to table sizeSimon Veith1-4/+14
Per the specification, and as observed in hardware, the SMMUv3 aligns the SMMU_STRTAB_BASE address to the size of the table by masking out the respective least significant bits in the ADDR field. Apply this masking logic to our smmu_find_ste() lookup function per the specification. ref. ARM IHI 0070C, section 6.3.23. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-5-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Check stream IDs against actual table LOG2SIZESimon Veith1-2/+6
When checking whether a stream ID is in range of the stream table, we have so far been only checking it against our implementation limit (SMMU_IDR1_SIDSIZE). However, the guest can program the STRTAB_BASE_CFG.LOG2SIZE field to a size that is smaller than this limit. Check the stream ID against this limit as well to match the hardware behavior of raising C_BAD_STREAMID events in case the limit is exceeded. Also, ensure that we do not go one entry beyond the end of the table by checking that its index is strictly smaller than the table size. ref. ARM IHI 0070C, section 6.3.24. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-4-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Correct SMMU_BASE_ADDR_MASK valueSimon Veith1-1/+1
There are two issues with the current value of SMMU_BASE_ADDR_MASK: - At the lower end, we are clearing bits [4:0]. Per the SMMUv3 spec, we should also be treating bit 5 as zero in the base address. - At the upper end, we are clearing bits [63:48]. Per the SMMUv3 spec, only bits [63:52] must be explicitly treated as zero. Update the SMMU_BASE_ADDR_MASK value to mask out bits [63:52] and [5:0]. ref. ARM IHI 0070C, section 6.3.23. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-3-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20hw/arm/smmuv3: Apply address mask to linear strtab base addressSimon Veith1-1/+1
In the SMMU_STRTAB_BASE register, the stream table base address only occupies bits [51:6]. Other bits, such as RA (bit [62]), must be masked out to obtain the base address. The branch for 2-level stream tables correctly applies this mask by way of SMMU_BASE_ADDR_MASK, but the one for linear stream tables does not. Apply the missing mask in that case as well so that the correct stream base address is used by guests which configure a linear stream table. Linux guests are unaffected by this change because they choose a 2-level stream table layout for the QEMU SMMUv3, based on the size of its stream ID space. ref. ARM IHI 0070C, section 6.3.23. Signed-off-by: Simon Veith <sveith@amazon.de> Acked-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Message-id: 1576509312-13083-2-git-send-email-sveith@amazon.de Cc: Eric Auger <eric.auger@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20ast2600: Configure CNTFRQ at 1125MHzAndrew Jeffery1-0/+3
This matches the configuration set by u-boot on the AST2600. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 080ca1267a09381c43cf3c50d434fb6c186f2b6e.1576215453.git-series.andrew@aj.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-19numa: properly check if numa is supportedIgor Mammedov1-1/+0
Commit aa57020774b, by mistake used MachineClass::numa_mem_supported to check if NUMA is supported by machine and also as unrelated change set it to true for sbsa-ref board. Luckily change didn't break machines that support NUMA, as the field is set to true for them. But the field is not intended for checking if NUMA is supported and will be flipped to false within this release for new machine types. Fix it: - by using previously used condition !mc->cpu_index_to_instance_props || !mc->get_default_cpu_node_id the first time and then use MachineState::numa_state down the road to check if NUMA is supported - dropping stray sbsa-ref chunk Fixes: aa57020774b690a22be72453b8e91c9b5a68c516 Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1576154936-178362-3-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-12-16hw/arm/nseries: Replace the bluetooth chardev with a "null" chardevThomas Huth1-9/+7
We are going to remove the bitrotten bluetooth backend, so we can not use it in the n800 and n810 machines anymore. Replace the chardev here with a "null" chardev and stop including the "hw/bt.h" header. I am not aware of a full working N8x0 environment that can be used to test these machines, but the Linux kernel from the Meego project that can be found on http://stskeeps.subnetmask.net/meego-n8x0/ still seems to boot as far as it did before. Message-Id: <20191120091014.16883-2-thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-12-16Merge remote-tracking branch ↵Peter Maydell6-226/+296
'remotes/pmaydell/tags/pull-target-arm-20191216-1' into staging target-arm queue: * Add support for Cortex-M7 CPU * exynos4210_gic: Suppress gcc9 format-truncation warnings * aspeed: Various minor bug fixes and improvements * aspeed: Add support for the tacoma-bmc board * Honour HCR_EL32.TID1 and .TID2 trapping requirements * Handle trapping to EL2 of AArch32 VMRS instructions * Handle AArch32 CP15 trapping via HSTR_EL2 * Add support for missing Jazelle system registers * arm/arm-powerctl: set NSACR.{CP11, CP10} bits in arm_set_cpu_on * Add support for DC CVAP & DC CVADP instructions * Fix assertion when SCR.NS is changed in Secure-SVC &c * enable SHPC native hot plug in arm ACPI # gpg: Signature made Mon 16 Dec 2019 11:08:07 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20191216-1: (34 commits) target/arm: ensure we use current exception state after SCR update hw/arm/virt: Simplify by moving the gic in the machine state hw/arm/acpi: enable SHPC native hot plug hw/arm/acpi: simplify AML bit and/or statement hw/arm/sbsa-ref: Simplify by moving the gic in the machine state target/arm: Add support for DC CVAP & DC CVADP ins migration: ram: Switch to ram block writeback Memory: Enable writeback for given memory region tcg: cputlb: Add probe_read arm/arm-powerctl: set NSACR.{CP11, CP10} bits in arm_set_cpu_on() target/arm: Add support for missing Jazelle system registers target/arm: Handle AArch32 CP15 trapping via HSTR_EL2 target/arm: Handle trapping to EL2 of AArch32 VMRS instructions target/arm: Honor HCR_EL2.TID1 trapping requirements target/arm: Honor HCR_EL2.TID2 trapping requirements aspeed: Change the "nic" property definition aspeed: Change the "scu" property definition gpio: fix memory leak in aspeed_gpio_init() aspeed: Add support for the tacoma-bmc board aspeed: Remove AspeedBoardConfig array and use AspeedMachineClass ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16hw/arm/virt: Simplify by moving the gic in the machine statePhilippe Mathieu-Daudé1-55/+54
Make the gic a field in the machine state, and instead of filling an array of qemu_irq and passing it around, directly call qdev_get_gpio_in() on the gic field. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20191209090306.20433-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16hw/arm/acpi: enable SHPC native hot plugHeyi Guo1-1/+6
After the introduction of generic PCIe root port and PCIe-PCI bridge, we will also have SHPC controller on ARM, so just enable SHPC native hot plug. Also update tests/data/acpi/virt/DSDT* to pass "make check". Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Heyi Guo <guoheyi@huawei.com> Message-id: 20191209063719.23086-3-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16hw/arm/acpi: simplify AML bit and/or statementHeyi Guo1-8/+8
The last argument of AML bit and/or statement is the target variable, so we don't need to use a NULL target and then an additional store operation; using just aml_and() or aml_or() statement is enough. Also update tests/data/acpi/virt/DSDT* to pass "make check". Cc: Shannon Zhao <shannon.zhaosl@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Suggested-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Heyi Guo <guoheyi@huawei.com> Message-id: 20191209063719.23086-2-guoheyi@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16hw/arm/sbsa-ref: Simplify by moving the gic in the machine statePhilippe Mathieu-Daudé1-44/+42
Make the gic a field in the machine state, and instead of filling an array of qemu_irq and passing it around, directly call qdev_get_gpio_in() on the gic field. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191206162303.30338-1-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed: Change the "nic" property definitionCédric Le Goater1-3/+2
The Aspeed MII model has a link pointing to its associated FTGMAC100 NIC in the machine. Change the "nic" property definition so that it explicitly sets the pointer. The property isn't optional : not being able to set the link is a bug and QEMU should rather abort than exit in this case. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-18-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed: Change the "scu" property definitionCédric Le Goater2-8/+8
The Aspeed Watchdog and Timer models have a link pointing to the SCU controller model of the machine. Change the "scu" property definition so that it explicitly sets the pointer. The property isn't optional : not being able to set the link is a bug and QEMU should rather abort than exit in this case. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-17-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed: Add support for the tacoma-bmc boardCédric Le Goater1-0/+28
The Tacoma BMC board is replacement board for the BMC of the OpenPOWER Witherspoon system. It uses a AST2600 SoC instead of a AST2500 and the I2C layout is the same as it controls the same main board. Used for HW bringup. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-15-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed: Remove AspeedBoardConfig array and use AspeedMachineClassCédric Le Goater1-104/+127
AspeedBoardConfig is a redundant way to define class attributes and it complexifies the machine definition and initialization. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-14-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed/i2c: Add support for DMA transfersCédric Le Goater2-0/+10
The I2C controller of the Aspeed AST2500 and AST2600 SoCs supports DMA transfers to and from DRAM. A pair of registers defines the buffer address and the length of the DMA transfer. The address should be aligned on 4 bytes and the maximum length should not exceed 4K. The receive or transmit DMA transfer can then be initiated with specific bits in the Command/Status register of the controller. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed: Add a DRAM memory region at the SoC levelCédric Le Goater2-4/+12
Currently, we link the DRAM memory region to the FMC model (for DMAs) through a property alias at the SoC level. The I2C model will need a similar region for DMA support, add a DRAM region property at the SoC level for both model to use. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-14hw: add compat machines for 5.0Cornelia Huck1-1/+6
Add 5.0 machine types for arm/i440fx/q35/s390x/spapr. For i440fx and q35, unversioned cpu models are still translated to -v1; I'll leave changing this (if desired) to the respective maintainers. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20191112104811.30323-1-cohuck@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2019-12-13virtio-blk: advertise F_WCE (F_FLUSH) if F_CONFIG_WCE is advertisedEvgeny Yakovlev1-0/+1
Virtio spec 1.1 (and earlier), 5.2.5.2 Driver Requirements: Device Initialization: "Devices SHOULD always offer VIRTIO_BLK_F_FLUSH, and MUST offer it if they offer VIRTIO_BLK_F_CONFIG_WCE" Currently F_CONFIG_WCE and F_WCE are not connected to each other. Qemu will advertise F_CONFIG_WCE if config-wce argument is set for virtio-blk device. And F_WCE is advertised only if underlying block backend actually has it's caching enabled. Fix this by advertising F_WCE if F_CONFIG_WCE is also advertised. To preserve backwards compatibility with newer machine types make this behaviour governed by "x-enable-wce-if-config-wce" virtio-blk-device property and introduce hw_compat_4_2 with new property being off by default for all machine types <= 4.2 (but don't introduce 4.3 machine type itself yet). Signed-off-by: Evgeny Yakovlev <wrfsh@yandex-team.ru> Message-Id: <1572978137-189218-1-git-send-email-wrfsh@yandex-team.ru> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-11-26hw/arm: versal: Add the CRP as unimplementedEdgar E. Iglesias1-0/+2
Add the CRP as unimplemented thus avoiding bus errors when guests access these registers. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20191115154734.26449-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2024-08-21 10:57:54 +0000