aboutsummaryrefslogtreecommitdiff
path: root/hw/arm
AgeCommit message (Collapse)AuthorFilesLines
2018-02-15raspi: Raspberry Pi 3 supportPekka Enberg1-10/+21
This patch adds Raspberry Pi 3 support to hw/arm/raspi.c. The differences to Pi 2 are: - Firmware address - Board ID - Board revision The CPU is different too, but that's going to be configured as part of the machine default CPU when we introduce a new machine type. The patch was written from scratch by me but the logic is similar to Zoltán Baldaszti's previous work, which I used as a reference (with permission from the author): https://github.com/bztsrc/qemu-raspi3 Signed-off-by: Pekka Enberg <penberg@iki.fi> [PMM: fixed trailing whitespace on one line] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-15bcm2836: Make CPU type configurablePekka Enberg2-8/+12
This patch adds a "cpu-type" property to BCM2836 SoC in preparation for reusing the code for the Raspberry Pi 3, which has a different processor model. Signed-off-by: Pekka Enberg <penberg@iki.fi> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-15hw/arm/aspeed: simplify using the 'unimplemented device' for aspeed_soc.ioPhilippe Mathieu-Daudé1-29/+3
(qemu) info mtree address-space: cpu-memory-0 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-0000000007ffffff (prio 0, rom): aspeed.boot_rom - 000000001e600000-000000001e7fffff (prio -1, i/o): aspeed_soc.io + 000000001e600000-000000001e7fffff (prio -1000, i/o): aspeed_soc.io 000000001e620000-000000001e6200ff (prio 0, i/o): aspeed.smc.ast2500-fmc 000000001e630000-000000001e6300ff (prio 0, i/o): aspeed.smc.ast2500-spi1 000000001e631000-000000001e6310ff (prio 0, i/o): aspeed.smc.ast2500-spi2 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180209085755.30414-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-15hw/arm/aspeed: directly map the serial device to the system address spacePhilippe Mathieu-Daudé1-1/+2
(qemu) info mtree address-space: cpu-memory-0 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-0000000007ffffff (prio 0, rom): aspeed.boot_rom 000000001e600000-000000001e7fffff (prio -1, i/o): aspeed_soc.io - 000000001e784000-000000001e78401f (prio 0, i/o): serial 000000001e620000-000000001e6200ff (prio 0, i/o): aspeed.smc.ast2500-fmc 000000001e630000-000000001e6300ff (prio 0, i/o): aspeed.smc.ast2500-spi1 [...] 000000001e720000-000000001e728fff (prio 0, ram): aspeed.sram 000000001e782000-000000001e782fff (prio 0, i/o): aspeed.timer + 000000001e784000-000000001e78401f (prio 0, i/o): serial 000000001e785000-000000001e78501f (prio 0, i/o): aspeed.wdt 000000001e785020-000000001e78503f (prio 0, i/o): aspeed.wdt Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180209085755.30414-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-13hw/arm/xilinx_zynqmp: enable the UHS-I modePhilippe Mathieu-Daudé1-0/+1
see the Xilinx datasheet "UG1085" (v1.7) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-28-f4bug@amsat.org>
2018-02-13hw/arm/xilinx_zynqmp: fix the capabilities/spec version to match the datasheetPhilippe Mathieu-Daudé1-11/+18
checking Xilinx datasheet "UG1085" (v1.7) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-27-f4bug@amsat.org>
2018-02-13hw/arm/fsl-imx6: implement SDHCI Spec. v3Philippe Mathieu-Daudé1-0/+7
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-26-f4bug@amsat.org>
2018-02-13hw/arm/bcm2835_peripherals: change maximum block size to 1kBPhilippe Mathieu-Daudé1-1/+1
following the datasheet. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-25-f4bug@amsat.org>
2018-02-13hw/arm/bcm2835_peripherals: implement SDHCI Spec v3Philippe Mathieu-Daudé1-8/+13
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-24-f4bug@amsat.org>
2018-02-13hw/arm/xilinx_zynq: fix the capabilities register to match the datasheetPhilippe Mathieu-Daudé1-24/+29
checking Xilinx datasheet "UG585" (v1.12.1) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-17-f4bug@amsat.org>
2018-02-13hw/arm/exynos4210: add a comment about a very similar SDHCI (Spec. v2)Philippe Mathieu-Daudé1-0/+12
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-16-f4bug@amsat.org>
2018-02-13hw/arm/exynos4210: access the 64-bit capareg with qdev_prop_set_uint64()Philippe Mathieu-Daudé1-1/+1
We only set a 32-bit value, but this is a good practice in case this code is used as reference. (missed in 5efc9016e52) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-15-f4bug@amsat.org>
2018-02-09Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2018-02-07-v4' ↵Peter Maydell1-0/+1
into staging Miscellaneous patches for 2018-02-07 # gpg: Signature made Fri 09 Feb 2018 12:52:51 GMT # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-misc-2018-02-07-v4: Move include qemu/option.h from qemu-common.h to actual users Drop superfluous includes of qapi/qmp/qjson.h Drop superfluous includes of qapi/qmp/dispatch.h Include qapi/qmp/qnull.h exactly where needed Include qapi/qmp/qnum.h exactly where needed Include qapi/qmp/qbool.h exactly where needed Include qapi/qmp/qstring.h exactly where needed Include qapi/qmp/qdict.h exactly where needed Include qapi/qmp/qlist.h exactly where needed Include qapi/qmp/qobject.h exactly where needed qdict qlist: Make most helper macros functions Eliminate qapi/qmp/types.h Typedef the subtypes of QObject in qemu/typedefs.h, too Include qmp-commands.h exactly where needed Drop superfluous includes of qapi/qmp/qerror.h Include qapi/error.h exactly where needed Drop superfluous includes of qapi-types.h and test-qapi-types.h Clean up includes Use #include "..." for our own headers, <...> for others vnc: use stubs for CONFIG_VNC=n dummy functions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster1-0/+1
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09hw/arm: Move virt's PSCI DT fixup code to arm/boot.cAndrey Smirnov2-61/+65
Move virt's PSCI DT fixup code to arm/boot.c and set this fixup to happen automatically for every board that doesn't mark "psci-conduit" as disabled. This way emulated boards other than "virt" that rely on PSIC for SMP could benefit from that code. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-09hw: i.MX: Convert i.MX6 to use TYPE_IMX_USDHCAndrey Smirnov1-1/+1
Convert i.MX6 to use TYPE_IMX_USDHC since that's what real HW comes with. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-06hw/arm: Replace fprintf(stderr, "*\n" with error_report()Alistair Francis11-33/+38
Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. The 'qemu: ' prefix was manually removed from the hw/arm/boot.c file. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: qemu-arm@nongnu.org Conversions that aren't followed by exit() dropped, because they might be inappropriate. Also trim trailing punctuation from error messages. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-3-armbru@redhat.com>
2018-02-02hw/audio/wm8750: move WM8750 declarations from i2c/i2c.h to audio/wm8750.hPhilippe Mathieu-Daudé3-3/+6
while here use TYPE_WM8750 and declare a data_req_cb() typedef. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170919123053.32675-1-f4bug@amsat.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-26xlnx-zynqmp: Connect the IPI device to the ZynqMP SoCAlistair Francis1-0/+14
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2018-01-26aarch64-softmmu.mak: Use an ARM specific configAlistair Francis1-1/+1
In preperation for having an ARM and MicroBlaze ZynqMP machine let's split out the current ARM specific config options. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2018-01-25hw/arm/virt: Check that the CPU realize method succeededPeter Maydell1-1/+1
We were passing a NULL error pointer to the object_property_set_bool() call that realizes the CPU object. This meant that we wouldn't detect failure, and would plough blindly on to crash later trying to use a NULL CPU object pointer. Detect errors and fail instead. In particular, this will be necessary to detect the user error of using "-cpu host" without "-enable-kvm" once we make the host CPU type be registered unconditionally rather than only in kvm_arch_init(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-22Fixes after renaming __FUNCTION__ to __func__Alistair Francis1-5/+3
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: Eric Blake <eblake@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-01-22Replace all occurances of __FUNCTION__ with __func__Alistair Francis8-68/+68
Replace all occurs of __FUNCTION__ except for the check in checkpatch with the non GCC specific __func__. One line in hcd-musb.c was manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> [THH: Removed hunks related to pxa2xx_mmci.c (fixed already)] Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-01-19possible_cpus: add CPUArchId::type fieldIgor Mammedov1-1/+2
Remove dependency of possible_cpus on 1st CPU instance, which decouples configuration data from CPU instances that are created using that data. Also later it would be used for enabling early cpu to numa node configuration at runtime qmp_query_hotpluggable_cpus() should provide a list of available cpu slots at early stage, before machine_init() is called and the 1st cpu is created, so that mgmt might be able to call it and use output to set numa mapping. Use MachineClass::possible_cpu_arch_ids() callback to set cpu type info, along with the rest of possible cpu properties, to let machine define which cpu type* will be used. * for SPAPR it will be a spapr core type and for ARM/s390x/x86 a respective descendant of CPUClass. Move parse_numa_opts() in vl.c after cpu_model is parsed into cpu_type so that possible_cpu_arch_ids() would know which cpu_type to use during layout initialization. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <1515597770-268979-1-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-01-19hw/arm/virt: Allow only supported dynamic sysbus devicesEduardo Habkost1-2/+4
Replace the TYPE_SYS_BUS_DEVICE entry in the allowed sysbus device list with the two device types that are really supported by the virt machine: vfio-amd-xgbe and vfio-calxeda-xgmac. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20171125151610.20547-3-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-01-19machine: Replace has_dynamic_sysbus with list of allowed devicesEduardo Habkost1-1/+2
The existing has_dynamic_sysbus flag makes the machine accept every user-creatable sysbus device type on the command-line. Replace it with a list of allowed device types, so machines can easily accept some sysbus devices while rejecting others. To keep exactly the same behavior as before, the existing has_dynamic_sysbus=true assignments are replaced with a TYPE_SYS_BUS_DEVICE entry on the allowed list. Other patches will replace the TYPE_SYS_BUS_DEVICE entries with more specific lists of devices. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: qemu-arm@nongnu.org Cc: qemu-ppc@nongnu.org Cc: xen-devel@lists.xenproject.org Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20171125151610.20547-2-ehabkost@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-01-16hw/arm/virt: Add virt-2.12 machine typePeter Maydell1-2/+17
Add virt-2.12 machine type. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11imx_fec: Do not link to netdevAndrey Smirnov1-0/+1
Binding to a particular netdev doesn't seem to belong to this layer and should probably be done as a part of board or SoC specific code. Convert all of the users of this IP block to use qdev_set_nic_properties() instead. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-11Virt: ACPI: fix qemu assert due to re-assigned table data addressZhaoshenglong1-7/+11
acpi_data_push uses g_array_set_size to resize the memory size. If there is no enough contiguous memory, the address will be changed. If we use the old value, it will assert. qemu-kvm: hw/acpi/bios-linker-loader.c:214: bios_linker_loader_add_checksum: Assertion `start_offset < file->blob->len' failed.` This issue only happens in building SRAT table now but here we unify the pattern for other tables as well to avoid possible issues in the future. Signed-off-by: Zhaoshenglong <zhaoshenglong@huawei.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-18misc: remove duplicated includesPhilippe Mathieu-Daudé1-1/+0
exec: housekeeping (funny since 02d0e095031) applied using ./scripts/clean-includes Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-13xlnx-zcu102: Add support for the ZynqMP QSPIFrancisco Iglesias2-0/+49
Add support for the ZynqMP QSPI (consisting of the Generic QSPI and Legacy QSPI) and connect Numonyx n25q512a11 flashes to it. Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20171126231634.9531-14-frasse.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-24hw/arm/virt: Add 2.11 machine typeEric Auger1-2/+17
Add virt-2.11 machine type. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 1511516626-21178-1-git-send-email-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-20hw/arm: Silence xlnx-ep108 deprecation warning during testsThomas Huth1-2/+5
The new deprecation warning for the xlnx-ep108 machine also pops up during "make check" which is kind of confusing. Silence it if testing mode is enabled. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Acked-by: Wei Huang <wei@redhat.com> Message-id: 1510846183-756-1-git-send-email-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-20hw/arm/aspeed: Unlock SCU when running kernelJoel Stanley2-0/+11
The ASPEED hardware contains a lock register for the SCU that disables any writes to the SCU when it is locked. The machine comes up with the lock enabled, but on all known hardware u-boot will unlock it and leave it unlocked when loading the kernel. This means the kernel expects the SCU to be unlocked. When booting from an emulated ROM the normal u-boot unlock path is executed. Things don't go well when booting using the -kernel command line, as u-boot does not run first. Change behaviour so that when a kernel is passed to the machine, set the reset value of the SCU to be unlocked. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-id: 20171114122018.12204-1-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-13hw: add .min_cpus and .default_cpus fields to machine_classEmilio G. Cota3-8/+8
max_cpus needs to be an upper bound on the number of vCPUs initialized; otherwise TCG region initialization breaks. Some boards initialize a hard-coded number of vCPUs, which is not captured by the global max_cpus and therefore breaks TCG initialization. Fix it by adding the .min_cpus field to machine_class. This commit also changes some user-facing behaviour: we now die if -smp is below this hard-coded vCPU minimum instead of silently ignoring the passed -smp value (sometimes announcing this by printing a warning). However, the introduction of .default_cpus lessens the likelihood that users will notice this: if -smp isn't set, we now assign the value in .default_cpus to both smp_cpus and max_cpus. IOW, if a user does not set -smp, they always get a correct number of vCPUs. This change fixes 3468b59 ("tcg: enable multiple TCG contexts in softmmu", 2017-10-24), which broke TCG initialization for some ARM boards. Fixes: 3468b59e18b179bc63c7ce934de912dfa9596122 Reported-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-id: 1510343626-25861-6-git-send-email-cota@braap.org Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-13xlnx-zcu102: Specify the max number of CPUs for the EP108Emilio G. Cota1-0/+1
Just like the zcu102, the ep108 can instantiate several CPUs. Signed-off-by: Emilio G. Cota <cota@braap.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1510343626-25861-5-git-send-email-cota@braap.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-13xlnx-zcu102: Add an info message deprecating the EP108Alistair Francis1-0/+3
The EP108 was an early access development board that is no longer used. Add an info message to convert any users to the ZCU102 instead. On QEMU they are both identical. This patch also updated the qemu-doc.texi file to indicate that the EP108 has been deprecated. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Emilio G. Cota <cota@braap.org> Message-id: 1510343626-25861-4-git-send-email-cota@braap.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-13xlnx-zynqmp: Properly support the smp command line optionAlistair Francis2-11/+18
Allow the -smp command line option to control the number of CPUs we create. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Emilio G. Cota <cota@braap.org> Tested-by: Emilio G. Cota <cota@braap.org> Message-id: 1510343626-25861-3-git-send-email-cota@braap.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-13highbank: validate register offset before accessPrasad J Pandit1-2/+15
An 'offset' parameter sent to highbank register r/w functions could be greater than number(NUM_REGS=0x200) of hb registers, leading to an OOB access issue. Add check to avoid it. Reported-by: Moguofang (Dennis mo) <moguofang@huawei.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Message-id: 20171113062658.9697-1-ppandit@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-07hw/arm: Mark the "fsl,imx31" device with user_creatable = falseThomas Huth1-1/+5
QEMU currently crashes when the user tries to instantiate the fsl,imx31 device manually: $ aarch64-softmmu/qemu-system-aarch64 -M kzm -device fsl,,imx31 ** ERROR:/home/thuth/devel/qemu/tcg/tcg.c:538:tcg_register_thread: assertion failed: (n < max_cpus) Aborted (core dumped) The kzm board (which is the one that uses this CPU type) only supports one CPU, and the realize function of the "fsl,imx31" device also uses serial_hds[] directly, so this device clearly can not be instantiated twice and thus we should mark it with user_creatable = false. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1509519537-6964-4-git-send-email-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-07hw/arm: Mark the "fsl,imx25" device with user_creatable = falseThomas Huth1-1/+5
QEMU currently crashes when the user tries to instantiate the fsl,imx25 device manually: $ aarch64-softmmu/qemu-system-aarch64 -S -M imx25-pdk -device fsl,,imx25 ** ERROR:/home/thuth/devel/qemu/tcg/tcg.c:538:tcg_register_thread: assertion failed: (n < max_cpus) The imx25-pdk board (which is the one that uses this CPU type) only supports one CPU, and the realize function of the "fsl,imx25" device also uses serial_hds[] directly, so this device clearly can not be instantiated twice and thus we should mark it with user_creatable = 0. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1509519537-6964-3-git-send-email-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-07hw/arm: Mark the "fsl,imx6" device with user_creatable = falseThomas Huth1-1/+2
This device causes QEMU to abort if the user tries to instantiate it: $ qemu-system-aarch64 -M sabrelite -smp 1,maxcpus=2 -device fsl,,imx6 Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:222: qemu-system-aarch64: -device fsl,,imx6: Device 'serial0' is in use Aborted (core dumped) The device uses serial_hds[] directly in its realize function, so it can not be instantiated again by the user. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1509519537-6964-2-git-send-email-thuth@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-31msf2: Wire up SYSRESETREQ in SoC for system resetSubbaraya Sundeep1-0/+11
Implemented system reset by creating SYSRESETREQ gpio out from nvic. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Message-id: 1509253165-7434-1-git-send-email-sundeep.lkml@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-31xlnx-zcu102: Specify the max number of CPUsAlistair Francis1-0/+1
Specify the number of CPUs that can run on ZynqMP. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-06hw/arm/xlnx-zynqmp: Mark the "xlnx, zynqmp" device with user_creatable = falseThomas Huth1-0/+2
The device uses serial_hds in its realize function and thus can't be used twice. Apart from that, the comma in its name makes it quite hard to use for the user anyway, since a comma is normally used to separate the device name from its properties when using the "-device" parameter or the "device_add" HMP command. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1506441116-16627-1-git-send-email-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-27migration: pre_save return intDr. David Alan Gilbert2-2/+6
Modify the pre_save method on VMStateDescription to return an int rather than void so that it potentially can fail. Changed zillions of devices to make them return 0; the only case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already had an error_report/return case. Note: If you add an error exit in your pre_save you must emit an error_report to say why. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-2-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-23Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-5/+4
* Speed up AddressSpaceDispatch creation (Alexey) * Fix kvm.c assert (David) * Memory fixes and further speedup (me) * Persistent reservation manager infrastructure (me) * virtio-serial: add enable_backend callback (Pavel) * chardev GMainContext fixes (Peter) # gpg: Signature made Fri 22 Sep 2017 20:07:33 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (32 commits) chardev: remove context in chr_update_read_handler chardev: use per-dev context for io_add_watch_poll chardev: add Chardev.gcontext field chardev: new qemu_chr_be_update_read_handlers() scsi: add persistent reservation manager using qemu-pr-helper scsi: add multipath support to qemu-pr-helper scsi: build qemu-pr-helper scsi, file-posix: add support for persistent reservation management memory: Share special empty FlatView memory: seek FlatView sharing candidates among children subregions memory: trace FlatView creation and destruction memory: Create FlatView directly memory: Get rid of address_space_init_shareable memory: Rework "info mtree" to print flat views and dispatch trees memory: Do not allocate FlatView in address_space_init memory: Share FlatView's and dispatch trees between address spaces memory: Move address_space_update_ioeventfds memory: Alloc dispatch tree where topology is generared memory: Store physical root MR in FlatView memory: Rename mem_begin/mem_commit/mem_add helpers ... # Conflicts: # configure
2017-09-22memory: Get rid of address_space_init_shareableAlexey Kardashevskiy1-5/+4
Since FlatViews are shared now and ASes not, this gets rid of address_space_init_shareable(). This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20170921085110.25598-17-aik@ozlabs.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-21msf2: Add Emcraft's Smartfusion2 SOM kitSubbaraya Sundeep2-1/+106
Emulated Emcraft's Smartfusion2 System On Module starter kit. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-6-f4bug@amsat.org [PMD: drop cpu_model to directly use cpu type] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-09-21msf2: Add Smartfusion2 SoCSubbaraya Sundeep2-0/+239
Smartfusion2 SoC has hardened Microcontroller subsystem and flash based FPGA fabric. This patch adds support for Microcontroller subsystem in the SoC. Signed-off-by: Subbaraya Sundeep <sundeep.lkml@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170920201737.25723-5-f4bug@amsat.org [PMD: drop cpu_model to directly use cpu type, check m3clk non null] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2025-01-15 11:54:29 +0000